The x121e integrates a standard SSD?
Hello
I think I have an SSD for my Thinkpad. I bought s standard 2.5 "SSD drive but could not get it to fit. Does it support only 1.8 "drives or support 2.5" as well but only 7mm more?
Thanks for the help!
Jørgen
Hey there Jargen.
I can confirm that, the x121e uses SATA 3.0 GB/s, 2.5 "wide, 7 mm SSD drives. He checked the PSRef, against x121e around page 7 starts. I hope this helps!
Tags: ThinkPad Notebooks
Similar Questions
-
Is it possible to replace the hard drive with an SSD? or would it be too expensive?
Is it possible to replace the hard drive with an SSD?
or would it be too expensive?
Yes. There are several alternatives. I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook. It works very well. Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)
Re: This win to install a SSD drive in a PowerBook G4?
Re: SSDS (my post is halfway - "this is how I did with my trusty Pismo...) »)
FYI - I have used the adapter is even cheaper now
-
What are the best settings to standard calibration for the XBR65X850C?
What are the best settings to standard calibration for the XBR65X850C?
Hi DRATCLIFFE,
Thank you for your time to write a post.
We are very sorry for the late reply.
Change the picture or the sound settings of your TV depends on your preferences and on what you watch/listen to.
You can use the settings preset for image and sound.
In addition, to better enjoy your viewing experience, follow these steps:
- Install the latest software update. The updated software and the driver for your Sony product are available online.
- Set the automatic software download setting to automatically download software updates.
Thank you
^ RonIf my post answered your question, please mark it as "accept as a Solution.
-
ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?
Hey, Lenovo,.
I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?
Kind regards
Mikael
-
Can you tell me how to remove the microsoft business prosuctivity standard costume online licens
Can you tell me how to remove the microsoft business prosuctivity standard costume online licens
Hello
I suggest you post the question in the forums and check them off below if it helps:
http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices
It will be useful.
-
Remove the admin account, just standard account available
Some time before, I created an administrator account and a standard account and gave both a password, then, I deleted the admin account, completely forgetting to turn the other standard account to an admin.
Now, whenever I try to do something that is beyond the power of a standard account to, Window Vista with ask me to type a password to admin, but there is no place to type the password. The box to type in is not there!When I tried to turn my standard account in an admin, to create a new account, or nothing to do with an account, Vista will ask me a password that I can't provide and have no where to give to command prompt to activate the hidden admin does not work too.If anyone can please help me turn my standard account now to an admin! Urgent!Yay! It is resolved! Thank you very much! So that before I posted this, I tried to find the safe mode option, myself and the possibility to press F8 just wasn't there! Then I got stuck there... Thank you very much!
-
Only the user is a Standard user, how do I get an admin account?
Hello
Windows 7 Pro
When I set up this new computer, I created the main account as a standard user. Bad move. Now when I try to make changes, I invited him UAC with an inactive "Yes" button. It is said to enter an administrator password - it is not one that I know. I'm not able to use the cmd as administrator either. I have to reinstall Windows to fix this? I tried several suggestions that I found on the web (safe mode, etc.) and nothing gets done by the UAC.
Thank you!
OT:
Only the user is a Standard user,
Sorry, I have reflected on something else when I wrote 'choice 4 '.
First, note the comment at the top of the page I linked to:
Theoretically if you do not have an administrator account, the built-in Administrator account should be available in safe mode (see also related articles). For any identified reason, the built-in Administrator sometimes to be unavailable in safe mode.
So, the first thing to do is to reboot safe mode and see if the built-in Administrator account is here. I will not delete my Admin accounts to test this situation.
Assuming that the built-in Administrator account is NOT available in Mode safe...
The link I gave you, the two method I (32-bit only) and method II require you to "open a command prompt at startup" and give a link for directions to do so. If you go to this link, there is a 'Option One' which uses the installation of Win 7 disc and a 'Option 2' that tells you to use the menu of Boot Options to boot into "Safe Mode with command prompt."
However, Safe Mode with command prompt not automatically you will get an account with computer administrator privileges, and I suspect that you will not be able to make registry changes suggested that way, despite the generally good reputation of sevenforums.com. So, use the Windows 7 installation DVD to display the "System Recovery Options" and then select "Command Prompt" there.
Assuming that you do not receive the built-in administrator enabled account, log in, create a new account and give administrator privileges. If you intend to use this account for anything other answering the UAC guests, create a second administrator account, "just in case."
Finally, open an elevated command prompt (right click > run as administrator) and use the following command to disable the built-in Administrator account:
NET user administrator / active: No.
-
Hi all
Please help me. I am beginner. And I join 3 different pictures based on the same projects. I mean that eclipse was working thick. But, I close my pc, then after some time, I restart my eclipse. He can't run my blackberry application. It gives this error
"Packaging could not create the output folder: deliverables/Standard/5.0.0.
Why?
Thanks in advance.
Finally, I solved it. I don't know, but I think this way is the solution.
(1) eclipse, and javaw.exe or java.exe, I close.
(2) even once open eclipse,
(3) clean all projects.
(4) I have apply this action.
(5) it works.
-
I would like to change the password of a standard user account.
original title: change password in Windows 7
I would like to change the password of a standard user account. Windows 7 tells me that if I do that some data may be lost. What data, specifically, I lose if I proceed?
I solved the problem.
Initially, I tried to reset the password using computer management > local users and groups > set password. However when I tried Control Panel > user accounts > manage user accounts > reset password I was able to change it without any error message. I guess there is a difference between 'set password' and 'reset password '.Thank you -
I have the discs for acrobat standard v9, I can buy another license to use it on another computer?
N ° Adobe no longer sells this old version.
-
Hello friends,
My requirement is
I want to create a table. Presents some columns to display text.
so my question is,
What is the difference between a Standard report column and display text (escape special characters) in the attribute column property?
Kind regards
Arianne.
Hi ujwala1234,
ujwala1234 wrote:
Hello friends,
My requirement is
I want to create a table. Presents some columns to display text.
so my question is,
What is the difference between a Standard report column and display text (escape special characters) in the attribute column property?
Kind regards
Arianne.
Here is the difference:
- Standard report column: this is used when your column in the SQL query returns the HTML markup. For example the query SQL with APEX_ITEM API columns or columns where you have mixed data in the column with the markup. In short, APEX rendering engine treats the column as HTML markup and analysis accordingly to display the required HTML element.
- Display text (escape special characters): this type analysis the column data in the form of data stored in the database (no HTML). During analysis if the data contains special characters then it escapes and displays the data.
Yes, you can mix the manual in the form of built on APEX_ITEM with normal standard report (display text) columns.
I hope this helps!
Kind regards
Kiran
-
How to change the font of a standard V4.2 LOV
APEX V4.2.3
DB EA 11.2
APEX listener V2.0.5.287.04.27
13 blue-gray theme
IE9.0.8112
FF29.0
How can I change the font of a standard LOV? I need a police minivan I'm the concatenation of the columns and using rpad() and they want a line upwards.
If I put
style = "" do-family: monospace ""
in the
Attributes of HTML form elements
only then the value selected in the back field appears in minivan and all values in the list appear in the default font (Arial?).
Thanks in advance
PaulP
Hello
Add the same style option attributes of the Form element
Kind regards
Jari
-
Dear,
I have a plan to set up a file of the virtual machine on an SSD. The host system is windows 10 (on an other SSD, I'll use 2 SSD), it should support the SSD very well. Then comes the question: should I also install an OS that needs support also guest SSD?
My opinion is it does not matter since the disk i/o operation is made by host operating system, it is the host operating system which finally determin whick block data will be published (optimization of the disk).
Am I wrong? Thank you.
Sorry for the enigmatic answer...
In your case, the answer is Yes: he cares about the type of media, while the virtual disk is a vmdk (virtual material treaty) and placed in an SSD.
There are a few cases where you might use a physical disk directly to the virtual machine (called peripheral raw disk or RDM in vSphere environment).
Concerning
-
Hi, I've been reading place on it for a few hours and would like to get confirmation here. I have
-a physical host: dual processor, 8 cores per processor
-multiple licenses VSphere 5.0 Standard edition
-VCenter 5.0 Enterprise Edition
I want to distribute the VM with 12 vCPU and I expect to consume two licenses Standard Edition - one for each CPU, for a total of 12 vCPU. When I try to do using VCenter I get error "virtual machine has 12 virtual processors, but the host only supports 8.» "The number of virtual processors can be limited by the OS selected for the guest virtual computer or licensing for the host."
I think that it is a license restriction because on the same host, the VSphere evaluation has authorized the deployment of a 12 virtual machine using RHEL 6.3 vCPU. I checked later vCPU on evaluation copy function and it was 32 channels for it proves that it is not a BONE or a physical problem. I think I downloaded an evaluation of the 'norm' rather 'Enterprise', but I am not sure.
I read compare VMware vSphere editions and the 'Standard' column has CPU line: "CPU 1" and line vCPU: '8 - way '. This makes me think that, for each new license, I should have a CPU with up to 8 cores. that is by consuming two licenses, I use 2 CPU and up to 16 cores.
I also read the EULA VMware multi-core pricing and Licensing Policy , and he said:
Software licenses with six (6) cores per processor
It does not say "with hearts of six (6) software licenses by host '
The following excerpt from the EULA is the only evidence that I could find to support the conclusion that for Standard Edition, the maximum number of vCPU for each host is 8 (regardless of the number of licenses consumed);
Combines VMware licenses on a single host software. Licensing policy allows combining the even on software licenses uniprocessor.Someone can confirm the limitation and is there something obvious that I missed to compare VMware vSphere editions. The difference between host and per processor is huge, I'm surprised that it is ambiguous.
Thank you
Diarmuid
Looking at this picture, it is said that you need 1 VMware Standard license per physical processor that your host has. Down the chart to the vCPU, who said that a VM can have at most 8 vCPUs (for Standard). Isn't 8 vCPUs per license, which is 8 vCPUs total.
The demo version is licensed Enterprise Plus and develops of vCPU 32 on a virtual machine.
-
When I try to download the disks of the instillation of a standard Adobe suite create 2 that I bought, the license number is associated with an old Photoshop and asks me to check this program and get on my new labtop. My new labtop has no former software adobe on it. Why can I simply use the install CD?
If you have a cs2 license and you are trying to install cs2, error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3
Maybe you are looking for
-
Error importing CDs in Itunes 12.3.17
Trying to import them into Itunes on a cd, I get an error that is reported as "an error occurred when importing a file «...»» ». A file has been specified instead of a folder". I've seen a similar report, but the Word file and the folder in the last
-
HP ENVY 247c 750 desktop: are my partitions (drive C and drive D) correct?
Can someone explain why the storage capacity of my C drive is one-tenth of the total storage capacity of the entire hard drive. I bought this computer with plug ago 3 weeks as follows: 6th generation processor Intel Core i7-6700 24GO, DDR4 system me
-
Why is my firefox browser so small on my screen?
09/11/11 I bought a new computer hp laptop dv7 with windows 7 and a screen high definition, and when I open firefox, I enlarge each page I'll just so I can read the text. I had to go back to the use of internet explorer which doesn't have this proble
-
Glimpses of the URL do not work for me now. I'm on 7.16. no idea why?
-
HP 110 Wireless does not print troubleshoot has no answers
I, ve lost communication with HP110 wireless. Restarted the printer, modem, used restore point. I am a novice so be gentle.