URL previews not working

Similar Questions

• short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964

  Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)

• Shared services and the workspace URL do not work in the EPM 11.1.2.2 system

  Hello
  Shared services and the workspace URL do not work in the EPM 11.1.2.2 system
  I installed the EPM V11.1.2.2 system in the single server environment (MS 2008 Server R2) with the following components:
  * Foundation Services
  * HFM
  * FDM
  
  Have used embedded Weblogic server as a web application server and Oracle HTTP server as a web server. The installation was successful.
  During configuration.
  (1) I selected the option to deploy applications web SSP and workspace to a single managed server. Applications deployed successfully at EPMServer0.
  (2) in addition, I have selected to configure Oracle HTTP server as a web server.
  These two steps were successful.
  
  But shared services and the workspace URL do not work. We get a 404 error.
  Shared services: http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
  Workspace: http://inmum01hyp05.internal.vodafone.com:19000 / workspace /.
  
  When I checked the EPMServer0, Weblogic administration console is in SHUTDOWN State, tried to start it but it goes by State ADMIN instead of RACING.
  Checked the newspaper EPMServer0 to 'D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs' and found the error at the end of this message.
  
  Can someone please suggest a solution for this.
  
  # < 6 June 2013 11:43:20 IST > < emergency > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200246 > < BEA-149259 > < server 'EPMServer0' 'EPMServer' is high in the State of the administration due to the failure of the deployments. >
  # < 6 June 2013 11:43:20 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200902 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201106 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebLogicServer > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201137 > < BEA-000256 > < Invoking weblogic.transaction.internal.StartupClass.main (null) >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] changes from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully go from STATE_PREPARED to STATE_ADMIN on server EPMServer0. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149059 > < inspection.wsil STATE_PREPARED request Module, wsil-wls is transition to the STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:44:13 IST > < Info > < Diagnostics > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1370499253433 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server EPMServer0. >
  
  Thanks in advance.
  TEJ

  Hi all.

  Thanks for all your useful contributions.

  Finally, the reconfiguration is successful.

  Yes John, the problem was with the deployment, but was not able to understand what goes wrong with the deployment.

  Tried to uninstall clean twice with the deletion of registry. Last updated variable of path by removing all entries related to Hyperion during the uninstall.

  Installation and configuration was successful after that. In addition, I did not compact deployment this time and used separate web servers to the deployment.

  Finally, Shared Services and the workspace URL work correctly.

  http://servername:28080/Interop/index.jsp

  http://servername:28080 / workspace /.

  Kind regards

  TEJ B

• Flash reader download URL does not work

  I try to install the flash player and reader on my computer (windows 8) but the download URL does not work. What could be the problem?

  OK finally managed to do work! apparently my antivirus has blocked pages.

  Thanks a lot anyway!

  concerning

• Buttons containing the URLS do not work when published.

  I am using Captivate 3 and other buttons that include links to the external URL do not work when you publish a project as a swf.

  When the buttons are clicked on in the browser, that nothing is happening, the URLS appear to have been lost. Other buttons in the project who sail to the other slides to continue working, only the external URL buttons have stopped.

  Could someone help me with this please?

  Thank you

  Rob

  Hello

  This could be the Flash Player silently block the call.

  Click here and follow what is offered

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Click on boxes that have a link to open a file or a URL do not work when the file is published.

  When you insert a click on a slide box, you are given the option to choose what happens "on success". I chose to open a file or a URL. When I press F4 to display a preview of the slide or a file, the links work correctly. But, when the file is completely released on a Flash SWF/HTM file, it does not work. The click box is here (Colombia-British hand appears), but no action takes place when it is selected. Please notify. Here is a screenshot.

  

  Hello

  The Captivate main page probably visited before validation is a landing called stickyzone.

  

  Unfortunately, you seem to have missed this area. If you had clicked on the topic frequently problems, you would have found your answer!

  Please see this topic using the link below and you will find your answer.

  Click here to see

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Change browser.newtab.url does not work

  Hello

  Installed some crapware today and have trovi.com as the page by default when I open a new tab. It makes me incredibly angry. What is even worse, he has changed the browser.newtab.url and when I removed the config it STILL load the same page.

  I tried to enter a new configuration, it does not work.

  I tried to install this addon: https://addons.mozilla.org/en-GB/firefox/addon/new-tab-homepage/developers - does not work.

  Please help me. Do I have to reinstall the browser? Why can't I change the value?

  I'm on firefox version 42.

  Hi, please try to work through Remove Trovi of Chrome, Firefox and Internet Explorer by Malware advice.

  Note that not all programs removal allows to detect all malware, you may need to run multiple or all of them.

  After the withdrawal, you need to reset your home page and search, what you can do by running the add-on SearchReset.

  More info for reference on the page tab: for reasons of security, 41 of Firefox, you must use an add-on like tab override (browser.newtab.url replacement), to make changes to the page tab.

  Once installed, open the Add-ons (Ctrl + Shift + A) Manager > Extensions, and then look for the new tab override and click Options to set your preference.

  Note, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.

  You will then need to restart Firefox for all changes to take effect.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Previews not working do not under 10.3.1.2243?

  I was about to publish a new version of my app, when I noticed that previews are no longer works since I upgraded my Z10 10.2.1 to 10.3.1.2243. At first, I thought that I must have inadvertently turned off instant previews in my phone settings, but they continue to work properly when an email, text, or BBM comes in. I also checked the App specific notification settings and everything looks good. The notification is save in the hub and scratch the alarm, but the preview is not displayed. It worked perfectly until I upgraded my OS device.

  I'm doing something fancy in my application that allows me to build a single executable for OS 10.1 who can use the class of improved Notification of 10.2 if the application runs under 10.2 so I have to two generations. It worked fine under 10.2.1 but I was wondering if that ruse was causing my problem so I built a little app to Cascades coming fires a standard Notification 15 seconds after the start (which gives me enough time to switch to another application for the instant preview should be displayed). No matter if I have the build for Mac OS 10.2 or 10.3, in both cases the instant preview does not appear on my Z10. I can't test on a simulator since some sim versions are no notifications in the hub at all, and those that do will display previews not instant, even if the corresponding version of the ARM.

  I wonder if anyone test this for me on a device running 10.3.1.2243. Simply create a "Hello World" application standard Cascades, add the bbplatform library, and then replace the following code for the support. Set the level of the API on 10.2 to use the Notification class that is expected to review instant.

  I can't get my update until this is resolved. Thank you.

  UPDATE: I forgot to mention that you must ask permission to notice too.

  ApplicationUI.hpp

  #ifndef ApplicationUI_HPP_
  #define ApplicationUI_HPP_
  
  #include 
  
  namespace bb
  {
      namespace cascades
      {
          class LocaleHandler;
      }
  }
  
  class QTranslator;
  
  /*!
   * @brief Application UI object
   *
   * Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class ApplicationUI : public QObject
  {
      Q_OBJECT
  public:
      ApplicationUI();
      virtual ~ApplicationUI() {}
  private slots:
      void onSystemLanguageChanged();
      void notify();
  private:
      QTranslator* m_pTranslator;
      bb::cascades::LocaleHandler* m_pLocaleHandler;
  };
  
  #endif /* ApplicationUI_HPP_ */
  

  ApplicationUI.cpp

  #include "applicationui.hpp"
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI() :
          QObject() {
      // prepare the localization
      m_pTranslator = new QTranslator( this );
      m_pLocaleHandler = new LocaleHandler( this );
  
      bool res = QObject::connect( m_pLocaleHandler, SIGNAL( systemLanguageChanged() ), this, SLOT( onSystemLanguageChanged() ) );
      // This is only available in Debug builds
      Q_ASSERT( res );
      // Since the variable is not used in the app, this is added to avoid a
      // compiler warning
      Q_UNUSED( res );
  
      // initial load
      onSystemLanguageChanged();
  
      // Create scene document from main.qml asset, the parent is set
      // to ensure the document gets destroyed properly at shut down.
      QmlDocument *qml = QmlDocument::create( "asset:///main.qml" ).parent( this );
  
      // Create root object for the UI
      AbstractPane *root = qml->createRootObject();
  
      // Set created root object as the application scene
      Application::instance()->setScene( root );
  
      QTimer::singleShot( 15000, this, SLOT( notify() ) );
  }
  
  void ApplicationUI::onSystemLanguageChanged() {
      QCoreApplication::instance()->removeTranslator( m_pTranslator );
      // Initiate, load and install the application translation files.
      QString locale_string = QLocale().name();
      QString file_name = QString( "InstantPreviewTest_%1" ).arg( locale_string );
      if ( m_pTranslator->load( file_name, "app/native/qm" ) ) {
          QCoreApplication::instance()->installTranslator( m_pTranslator );
      }
  }
  
  void ApplicationUI::notify() {
      bb::platform::Notification* notification = new bb::platform::Notification();
      notification->setTitle("Test Notification");
      notification->setBody("This is a test notification");
  
      notification->notify();
  }
  

  You must allow instant previews with the NotificationDefaultApplicationSettings class (take a long breath).
  http://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationdefaultapplicati...

  Here is the code of a project without empty head, which includes the instant preview by default (sorry for the formatting, I'm on mobile):
  Parameters of NotificationDefaultApplicationSettings;
  settings.setPreview (NotificationPriorityPolicy::Allow);
  Settings.Apply ();

• Eclipse plugin v 1.1 beta 2 update what URL does not work

  guys,

  I try to install the update of eclipse based on this document

  http://NA.BlackBerry.com/eng/developers/devbetasoftware/JavaPlugin.jsp

  but look at this link

  http://www.BlackBerry.com/go/eclipseUpdate/3.5/Java

  does not work. the failure of the server or the URL is no longer valid? 

  If it is not valid, where the URL is valid

  Thank you
  

  Try this one:

  http://NA.BlackBerry.com/eng/developers/devbetasoftware/jar/3.5/Java

  Generally works better for me.

• Built dynamically URL does not work

  Hi all.

  I have the following code in a PL/SQL block in the APEX like this which is actually almost identical to the example of Application APEX on the apex.oracle.com site.  However, I got a manual code.

  Here is the code:
  < code >

  sys. HTP.p ("< div class =" products"> ');

  sys. HTP.p ("< table width =" 100% "cellspacing =" 0 "cellpadding ="0"border ="0">)

  < thead >

  < tr > < class th = "left" > product < /th > < th > price < /th > < th > < /th > < /tr >

  < / thead >

  (< tbody > ');

  -ok here.

  C1 (select product_id, product_name, list_price, add_to_order 'Add to Cart'

  of demo_product_info

  where product_avail = 'Y '.

  loop of order by product_name)

  sys. HTP.p ("< tr > < class td =" left">)

  < a href = "javascript:popUp2('''||)". apex_util.prepare_url ('f? p = & APP_ID.:20 :'||: APP_SESSION |':ADD:P20_PRODUCT_ID :'|| sys.) HTF.escape_sc (C1.product_id)) | " (', "700", "400"); ' > '. sys. HTF.escape_sc (C1.product_name) | "< /a > < table > < td > ' | Trim (to_char (C1.list_price, '999G999G990D00')) | "< table > < td > < a href =" '. apex_util.prepare_url ('f? p = & APP_ID.:12 :'||: app_session |':ADD:P12_PRODUCT_ID :'||) C1.product_id) | " ' Class = "uButton uAltButton plu iconButton" > < span > < class i "iR" = > Add < / i > < / span > < /a >

  (< table > < /tr > ');

  end loop;

  sys. HTP.p ("< /tbody > < / table > '");

  sys. HTP.p ("< div '");

  < code >

  The problem is that the link that displays on the screen does not work even if the pointer to the arrow at the end of the finger.  The system just stays there and I can't for the life of me, see the problem.  The blocker is disabled.  The rest of the code works as the CSS.

  Any tips?

  I think it's wrong in the params of 700 and 400. They are between double quotes (at least in the code you posted!), while they are wrapped in the href quotes. Also do a double single quotation mark as you did around the part of the url.

  ''
  

• Urgent need help - APEX URL does not work when computer conncects to the Internet

  APEX, I installed it on my computer. But the APEX is unusable until the computer is running in offline mode.
  If I connect to the internet. Using the URL now
  http://localhost: 8080/apex
  I get the message below.
  ---------------------------
  Internet Explorer cannot display this webpage
  -----------------------------
  I also use the name of the computer/IP addresses to test, it does not work either.
  But if I work offline, APEX can work.
  
  I tried to disable IPv6 on my computer, but it still does not work.
  My OS is Win7. Recently, I changed my OS, the latest operating system is Windows XP and APEX worked correctly.
  Can anyone help with this?
  
  Thank you in advance.

  Disable the proxy for your localhost configuration (or add on an exceptional basis through manual configuration). Your network is not finding your host when searching the path (to the internet) to reach it.

• URL does not work when published, Please HELP!

  Hello world

  I have a problem:

  I added 2 URLs to my project using AS3 when I test the movie URL work, but when I open the swf file in the browser, it does not work.

  Is it because I didn't download the project on the server? or there is something wrong with the code?

  It's the I have the code I used for my URL:

  GamLink1_mc.addEventListener (MouseEvent.CLICK, URLC);
  GamLink2_mc.addEventListener (MouseEvent.CLICK, URLC);

  GamLink1_mc.buttonMode = true;
  GamLink1_mc.useHandCursor = true;

  GamLink2_mc.buttonMode = true;
  GamLink2_mc.useHandCursor = true;

  function navigateURL (url: String): void{}
  var urlCont:URLRequest = new URLRequest (url);
  navigateToURL (urlCont);
  }

  function URLC(event:MouseEvent):void {}

  {Switch (Event.Target.Name)}

  case 'GamLink1_mc ':
  navigateURL ("http://cso.iahgames.com/site/index.aspx");
  break;

  case 'GamLink2_mc ':
  navigateURL ("http://world.needforspeed.com/");
  break;
  }
  }

  Help would be appreciated.

  test online or allow local files access the internet sandbox: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l

• The URL does not work in Safari or mail after iOS 9.2.1

  After updating my iPad 2 Air iOS 9.2.1 I lived Safari crashing when trying to open a new tab. I solved this problem by disabling Search Suggestions and Suggestions of Safari engine in the settings, such as recommended. But now, if I did a search, I can not open all links in this research. If I type in a specific URL in the search box, and then I can open the page, but I am unable to connect, use the links in this page, etc.. Also, I find that I can't open URL links that I receive by Mail and click on a link then blocked mail... I did a full synchronization to my iMac, which can sometimes fix a problem, but it did not help in this instance.

  Everyone knows this?

  I haven't seen this behavior, but you try to clear the cache in Safari, close the application and restart the application?

  Go to settings > Safari > clear the history and data from the Web site

  To close Safari, press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close

• ADF BTF Invoke - rejected URL does not work. How to make it work?

  Hi, I have developed test using jdeveloper 11.1.2.4 portal application. In this application, I have an untied task flow and a single limited task. Here are their images.

  Unlimited Taskflow-

  

  TaskFlow bounded-

  

  First user gets the registration page to register itself. The URL is: http://IPADDRESS:9090 / JDEdwardsQuiz/faces/record. This page contains a Test button take. Once he clicks on the button, she enrolled in the flow of stubborn task question-workflow-definition. He must answer 7 questions. In the seventh page it has a send button. When he clicks on the button test will be submitted and it will come out this BTF through return (submit) of workflow and to put the results page. This is how this application works.

  My requirement is that any user should be able to do the test several times. For this I put property URLS invoke a question-workflow-definition BTF url-invoke-refused. When the user clicks the submit button on the page sevent it will put the result page, but in the browser the URL is http://localhost:9090/JDEdwardsQuiz/faces/question-flow-definition/q7?_adf.ctrl-state=2yq6hqwhq_13. So once there select the URL in the address bar and press ENTER, it will get seventh page of question. It can navigate to any question using the train, then he can resubmit the test. So, it shouldn't get seventh page if he select url and press ENTER.

  My requirement is that no user should pass test more than once. Please help me. How to achieve this. ?

  Thanks in advance.

  Have you tried school-without-enabled property?

  https://blogs.Oracle.com/raghuyadav/entry/adf_taskflow_reentry-not-allow

• _root. URL does not work with IE 6?

  Hello
  
  I hope that someone else has noticed that (or Adobe knows about this bug).
  
  The problem:
  
  I have the code that uses _root.url to determine the name of my SWF file, and then uses this information to find a corresponding XML file and a corresponding content folder. - So, in other words, if the SWF file is named "Demo01.swf" - so he looking for a corresponding XML file named "Demo01.xml" and a folder of content named "Demo01.
  
  It works perfectly in ALL browsers except IE 6.0 (I checked it in old Netscape, Firefox, Mozilla, IE 7, etc.).
  
  I post the code - but it's ridiculously simple - so I don't think that's the problem. (It simply takes the name, cut the "swf" and adds "xml" and similar to load the XML data, etc..)
  
  Does anyone have an idea why it would work in all browsers except IE 6?
  
  Any help is appreciated (including assumptions).
  
  Thank you.
  

  Wow... Raymond is great! -Thank you very much for taking the time to check this. -I'll check this code tonight at home - but it certainly looks like it solves the problem.

  ... - Funny, but I was myself beaten wondering how this obvious bug had in front of me - when obviously it happens that a local file - not a server... - location location anyway... must be resolved...

  * Phew! *... Thanks again!