The yellow light flashes on the printer.

Similar Questions

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• Changed to Comcast modem / gateway of the infinite. Ethernet cable lights are at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to the GREEN?

  Changed the old Comcast to Comcast modem / gateway Infinity with wifi. Ethernet cable lights are lit at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to a GREEN fixed?

  Whenever you change your network hardware, it's always a good idea to carry out a new round of full power to all your devices. Check out the following Tip of an airport users for more details. Please post back your results.

• My iPod shuffle 4th generation yellow light flashes. What does that mean?

  My iPod shuffle 4th generation yellow light flashes and I can't find this in the manual that comes with it, or in the manual online more great.  What it means when the yellow light flashes. ??

  May be the battery > iPod shuffle (4th generation): check the status of the battery

• Why is the yellow light flashing on my HP Deskjet 5550 printer?

  Green indicator light remains lit, but the yellow light keeps blinking.

  Take a look at Page 6 by your printer manual:

  http://h10032.www1.hp.com/ctg/Manual/bpd09384.pdf .

• My airport express base station works but the yellow light flashes constantly how can I get the green light?

  Yellow light blinking on my airport express and I can not get the green light flashes. Internet still works well.

  When the amber light is flashing, open AirPort Utility

  • Click on the AirPort router
  • Look for the Status parameter in the small window that appears
  • Click on the little orange dot here and another window will open to explain what might be the 'question '.

• Fill the cartridges of ink on deskjet 9800. Red light flashing, won't print. Always worked before.

  Your Question: I haven't found new, original HP cartridges for my deskjet 9800 in any store. I so did my ink on deskjet 9800 as I did with success several times in the past. Two red lights keep flashing. It won't print. [Someone suggested that I need a new print head?] What should do? thanx

  The coding strip only should be cleaned if there is a problem - it is very fragile and can be damaged, making the printer inoperable.  There is a post here that describes how do to clean the MICR band, but respect the warnings and don't do it unless necessary.  There is also a post here that shows how to solve one of the problems mishandling can cause.  Do not clean the Strip unless necessary.

  The coding is the band one located just behind the stem of transport semi-claire. It aims to help the print cartridge faithfully keep track of its position as it moves along the stem of transport. Sometimes dust, ink or oil can accumulate on this strip and cause the following problems:

  • Prints "stairs" to the bottom of the left margin of the self-test page.
  • The margins left or right of the self-test are not properly placed.
  • Ink cartridges carriage slams on the left side of the printer.
  • Automatic test double-print or obscured shows the letters.
  • Defects to flow the length of a printed page (portrait orientation), or on the whole page (landscape orientation).
  • Printing stops and the lights of the Control Panel on the printer indicate an error.
  • Gaps appear in the printed text or images.
  • Slow printing

  CAUTION:

  Do not clean the strip of coding for the following symptoms: media pick questions, paper jam tilt, ink cartridge, missing points or rejection white stripes with printing and smeared or streaked black ink.

   

• range of HP Office jet 5850 printers will not print. Small yellow light flashing. Ideas for a cheap solution?

  Printer HP 5850 deskjet ceased to print.  Small lfashing of yellow light.  Help!  Thank you.  R.

  The troubleshooting steps described in this document can help solve the problem of flashing lights on your Deskjet 5850.

• HP DeskJet 460 - lights flashing, won't print

  
  

  Hi warringtonsaint,

  Remove the cartridges from the printer, then check again there is no little pieces of paper in the printer. Turn the printer off for 1-2 minutes and then turn it back on. I would like to know if you still have the same blinking lights without the cartridges installed?

  Flashing lights

• HP Officejet 6500 E709n Console lights flashing & is not printing

  HP Officejet 6500 E709n stopped working yesterday and almost all of the lights on the console keep flashing continuously.  I get a message on the display to turn off, then turn it on but it still does the same once I do this.

  I have sought and found how to use # and 3 keys for a partial resets when you plug back in the power supply, but after I did it is still the same as before?

  I unplugged the power supply and all the rest and sit all night and this morning it did the same thing.

  Is it possible to do a complete reset instead of a part of the console?

  Thank you

  Ken

  OK tried to edit the post previous to add to this, but has not see a button "Edit"?

  So I got the printer Open as when you change cartredges and noticed that the print heads has not moved at the Center as usual?  Tried moving the print head with my hand and he moved only about 1/4 "back and all of a sudden the print head moved to the center that he assumed?  Closed the top and crossed a calibration and then printed that and now it works again.  Go figure!

  I guess that's a mechanical and electrical/electronic problem rather than something.  I looked and didn't see anything wrong with gears and stuff on top so it can be one problem somewhere else.

  Ennywho, I will continue to use it like that too long it will work.

  Thank you

• update so on different WiFi router and now my Airport base station has a yellow light flashing - how to reset the base station

  Light Flsahing Amber on my Airport base station

  A persistent, flashing amber light indicates that one of the conditions is possible more may require your attention:

  • The base station has not yet been configured, because it's new or reset switch has been set.
  • You have chosen a security configuration that is not recommended.
  • Among several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.

  (Ref: AirPort base stations: status of base station on airport (LED))

  To find out why your base station status led is orange flashing:

  • Open AirPort Utility
  • Click on the AirPort base station
  • Look for the Status parameter in the small window that appears
  • Click on the little orange dot here and another window will open to explain what might be the 'question '.

• yellow light flashing on my p6243w

  On the forehead to the upper right is a clear yellow flashing just above an image of the disc 3. It bliks all the time or is stable if do not use. What is it for

  It's the hard drive activity light and flashing is normal. The computer continues to run in the background and this led flashes or stays on even when you are not using the computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• That means a yellow light flashing battery?

  What does it mean when the battery light on the front of the laptop flashes in orange?  We had the problem of the laptop just blacking out while using it and also it is not turn it off properly.  We had hands on with the screen doesn't come not, but he had also to activate and start with the screen on.  Please give us a glimpse of our laptop problem.  It is less than two years old.

  Please go trough the VAIO laptop computer battery troubleshooting guidance for the battery.  Please also provide the name of the model of your VAIO computer so we can still help out if it's a battery or a problem of software on your computer.

  If my post answered your question, please mark it as "accept as a Solution.

• Why is my printer light flashing and not printing

  Hewlett packard deskjet 3915

  Flashing power light HP Deskjet 3915

• TouchSmart 610: TouchSmart 610 lights. I have a set of 5 beeps with a yellow light above the power button.

  I keep my office earlier this morning with the entry of the normal shutdown process. When I went to reactivate tonight all I get is a set of 5 beep with a yellow light flashing above the power switch. Repeat this five times then beeps stop and only yellow continuous flashing. I can hear and feel the hard drive running. I tried to unplug the power supply and then plugging, but the same thing happens. If I push and hold the power button on, it sounds like the hard drive stops and restarts. The normal blue light comes on for a few seconds then turns off and is replaced by the yellow flashing light. All you have no idea as to what may be the issue?

  Hello:

  Normally 5 beeps means there is a problem with the memory.

  I suggest that you remove and reinstall the memory modules and blow up if this doesn't fix the problem, if your PC has two memory modules, an and see if the beep disappears.

  If this is the case, remove this module and specify the first condition in you removed and if the beep begins once again find the defective memory chip.

  If it is not, remove the module and put the other in you deleted and if the ringing stops, you have found the faulty memory chip.

  Then replace the faulty memory module by one with the same specifications.

  If the ringing continues despite trying these steps, and then either the two chips of memory are bad (unlikely), or the motherboard has a problem.