then a MBP 15 "2011 run the last OSX

Looking at an old mac for my use and modular memory, I wonder what the last OSX support available for 2011 models?

Yes, El Capitan will run well on it. But if possible to at least 8 GB of RAM in there.

Tags: Notebooks

Similar Questions

I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

It is a decision that was made by Apple. El Capitan is the newest OSX that will support a 2009 MBP.

This is not uncommon. My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

Old hardware ends up by becoming obsolete with newer technology.

Ciao.

Keyboard shortcut to run the last Script?

Anyone know of a keyboard shortcut to run the last script that was executed? I'm editing an animation and wrote a script that writes code based on it, and I need a quick way to run it without the open file dialog box.
Thank you!

Method 1:

You can assign shortcut keys to the first 20 scripts listed under the file > Scripts menu via the file «Adobe after effects 10.5 shortcuts» Just search for "ExecuteScript' in the shortcuts file find the section.

Method 2:

You can use ft_ToolBar which allows to launch scripts with the click of a button. You can also create a new button and just paste your script code directly in the window provided without having to create a jsx/jsxbin file.

I have a MBP end 2011 running yosemite which is dead. How can I migrate (from Time Machine) on a similar MBP (mid-2012). I don't mind if I lose data on the MBP of the latter. Essentially, I want my old MBP to take the newest one.

My MBP end 2011 died. I want to migrate its content on Time Machine to a bit newer MBP. Basically the old MBP return to the most recent. It doesn't matter if the data on the new MBP are lost. Any help would be appreciated.

Hello

Yes you can do it. Pondini (here) has a few options to do.

You can also try Migration Wizard. See this article. But I'd go with Pondini, the guru of the Time Machine.

Installed windows 10 64 bit on MBP early 2011, installing the driver software stuck bootcamp

Installed windows 10 32 bit on MBP early 2011. Bootcamp software support 4.0 installs fine.

And then upgraded to windows 10 64-bit on the MBP even. But bootcamp software installs ok at first, then gets stuck in the audio driver installation.

Can someone suggest me the right version of the bootcamp software please?

Also, I even this problems from yesterday, my macbook pro late 2011 updated for windows 7 64 bit pro at 10 64-bit windows, then all my drivers boot camp work but when upgraded to Windows 10 pro, Setup stopped in audio only step no thing happened, thank you, I need to fix the installation for my mac files because I have more than work on windows today...

How to install the legacy Java so I can get Photoshop to run. the last update my operating system disabled my Photoshop. I downloaded Java by following the instructions of can't find it to install it.

I can't find the download of Java to install so I can run Photoshop again. The last update to my OS disabled.

Install a new OS, or by reinstalling the current always removes Apple Java 6. Installation will help any Java of Oracle 8 (ongoing). You need to reinstall Apple Java 6.

Download Java for OS X 2015-001

A1: Can someone running the last ICS perform a command for me?

Can someone please run this command and post your results?

ADB shell cat proc/pvr/verion

root@Android:/ # cat/proc/pvr/version
Version CustomerGoogle_Android_ogles1_ogles2_GPL sgxddk 18 1.8@785978 (release) omap4430_android
System Version String: Revision SGX = 1.2.5

CS4 to new MacBook Pro, running the Mavericks OSX but no disk drive

I have CS4 installed on a MacBook Pro running OSX Lion; I now have a new MacBook Pro running OSX Mavericks and install - I have the original CD but no disk drive on the new Mac - what do I do?
Help, please

You can download from - CS4 products download and you can install it on your Mac.

After replace new Board for MBP early 2011, if GPU problem will return again in the future?

I have a MBP early 2011 with the new logicboard on it, as the replacement program (extension program of repairs to MBP to cause GPU) recently applied a few months ago.

(my only original had GPU identical to everyone down to complain)

My question is;

is new logic board safe for heavy use? What are the differences between the original logicboard with a new, or it's just a new so it's average after use of a few years, it will be back again with the same question...

any idea for this?

Only Apple knows that information, but normally puts Apple redesigned parts for every Mac that are part of an alternative program to avoid the same problem in the future. However, we cannot say that for sure, but it shouldn't stop you using your Mac as usual.

Why all the BSOD? More in the last 10 days than the last 10 months

All of a sudden in the last 10 days, my PC has been constantly stop, a few automatic reboots [I know because Google Chrome, Opera & Internet Explorer all ask what I want to open the pages who suddenly disappeared]. Others showing the BSOD of different color...

Sometimes I got BSOD too, although on these occasions, it was not the old blue screen dark with a myriad of writing, instead a lighter blue screen telling me to stop, the evidence gathered [to up to 100% and then auto shut off and reboot]' the last 3 times there have been various error messages invited me to do a search on the internet for the answer...

IRQL_NOT_LESS_OR_EQUAL

DRIVER_POWER_STATE_FAILURE

KERNEL_DATA_INPAGE_ERROR

I did a bit of googling, found at Microsoft support group where others have been invited to copy, the minidump zip files and upload to skydrive; what I've done; the zipped file is available for reading... but do not have done this before. I'm not sure of the next step... I tried to simply enter answers.microsoft.com in the municipality filed, but it was not acceptable...

If I had to guess, in the previous six months before the current problems, I doubt that there are 2 episodes of BSOD stop.

I am running windows 8.1 completely up to date and it's really p * sing me OFF... others may say their system starts up quickly, and I confess that I have 3 or 4 drives external storage, and I use Acronis as a safeguard measure after the last time I had to reload Windows [due to a failed update]... but after BSOD today... I timed it the beginning upward and it took 1 min 45 sec as soon as the start screen first showed... when the blocked password login screen appeared... so I want this issue fixed! PLEASE...

Chris

There are 3 different causes, but according to me, there is an underlying problem. Please run the Driver Verifier to find which driver he is

These accidents were related to the corruption of memory (probably caused by a driver).

Run these two tests to check your memory and find which driver is causing the problem. Launch auditor. You don't need to run memtest again unless the auditor is not the cause, or you want to.

If you are overclocking anything reset by default before running these tests.

In other words STOP! If you don't know what it means that you're probably not

1-Driver Verifier (for full instructions, see our wiki here)

2-Memtest. (You can learn more about running memtest here)

run the Web service
Hello
my English is not very good
I use jdeveloper 11.1.1.3.0.
I have a function in the module of the application. return type of function is 'list < ViewObjRowImpl > '.
I'm a Web Service from this function
Accordingly, I have run 3 view Obj and do a calculation on the objects in view. then I put the final value in other Obj view (4th). and then I put the 4th view Obj value in a list < ViewObjRowImpl >.

part of the code

Set of lines objRowSet = getViewObjectImpl () .getRowSet ();
objRowSet.first ();

< ViewObjRowImpl > the list result = new ArrayList < ViewObjRowImpl > ();

for (int i = 0; i < objRet.getRowCount () 2; i ++) {}
result. Add (i, (ViewObjRowImpl) objRet.getCurrentRow ());
objRet.next ();
}

try {}
return the result;
}
catch (Exception e) {}

///////////////////

When I send the parameter to the Web Service and run the Web Service: correctly fill the list with the value of obj view, and also the function run the last line 'result' and don't you go into the catch block
but the Exception below is coming:

< JAXWSMessages > < Journal > Exception during execution of the business logic: Transaction has expired after 34 seconds
BEA1-023E16AE9EC79E472B1E

I don't know why, can anyone help me?
You can try to increase the JTA transaction time-out in Weblogic. http://docs.Oracle.com/CD/E13222_01/WLS/docs81/ConsoleHelp/domain_domain_config_jta.html
(which is perhaps too short for your 30 ws)

Dario

VI to run the .exe program

Hello

use of labview to activate and run a .exe program located in a specific folder on the c drive?

When I run the program .exe manually from the command prompt I navigate to the desired folder, and then enter "runapplication.exe" to run the compiled c code.

I've searched the forums labview but especially articles relating to the creation of executables labview or labview .exe programs.

Also could call or run the TestSTAND .exe program without having to create a VI?

Thank you

try System exec.

the last character to jump printjoins

My version of oracle is 10.2.0.4.0. I defined the special characters in the printjoins. Therefore, special characters are now stored in the chips, but this isn't the last special character.
Steps to reproduce:

create table mywords
(text varchar2(200));
insert into mywords values ('HELLO P.L.C.');
insert into mywords values ('WORLD H.M.');
-- I define lexer as follows: 
BEGIN
   --ctx_ddl.DROP_PREFERENCE('my_lexer');
   ctx_ddl.create_preference('my_lexer','BASIC_LEXER');
   ctx_ddl.set_attribute('my_lexer','printjoins','-_~!@#$%^&*(){}[]=?\;><.+');
END;
/  
CREATE INDEX MYWORDS_CTX ON mywords(text) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS ('lexer my_lexer SYNC(ON COMMIT)');

Now I'm waiting for the symbolic text to store P.L.C. and H.M. but it only stores P.L.C & hadil
I won't be able to define the join end as '.' because it is already defined in print join.

sql> SELECT TOKEN_TEXT FROM DR$MYWORDS_CTX$I WHERE TOKEN_TEXT LIKE 'H.%' or TOKEN_TEXT LIKE 'P.L.%';
TOKEN_TEXT
----------------------------------------------------------------
P.L.C
H.M

All the solutions to store the last special character also?
Thanks for your time.

The period is a sign of punctuation by default, as well as the question mark and exclamation mark. When you have the period as a printjoin and a punctuation, punctuation is a priority. Although the last period will not be part of your token, it won't affect your research. You can reset your punctuation to just the question mark and exclamation mark, without the period and which will cause the last period to include in the token, but it will be another problem. If you do this, then once you are looking for the last word of a sentence before a period, you will need to include this period or you won't find it. Please see the demo below shows first what you have with the research work as planned, and then removes the punctuation period, so that the last period is included in the token, but then a search for the last word in a sentence without a period is not found. Thus, it is best to leave things as they are.

SCOTT@orcl_11gR2> create table mywords
  2    (text varchar2 (200))
  3  /

Table created.

SCOTT@orcl_11gR2> insert into mywords values ('HELLO P.L.C.')
  2  /

1 row created.

SCOTT@orcl_11gR2> insert into mywords values ('WORLD H.M.')
  2  /

1 row created.

SCOTT@orcl_11gR2> insert into mywords values ('This is a test.')
  2  /

1 row created.

SCOTT@orcl_11gR2> BEGIN
  2       ctx_ddl.create_preference
  3         ('my_lexer',
  4          'BASIC_LEXER');
  5       ctx_ddl.set_attribute
  6         ('my_lexer',
  7          'printjoins',
  8          '-_~!@#$%^&*(){}[]=?\;><.+');
  9  END;
 10  /

PL/SQL procedure successfully completed.

SCOTT@orcl_11gR2> CREATE INDEX MYWORDS_CTX
  2  ON mywords (text)
  3  INDEXTYPE IS CTXSYS.CONTEXT
  4  PARAMETERS
  5    ('lexer        my_lexer
  6        SYNC        (ON COMMIT)
  7        STOPLIST  CTXSYS.EMPTY_STOPLIST')
  8  /

Index created.

SCOTT@orcl_11gR2> SELECT TOKEN_TEXT
  2  FROM   DR$MYWORDS_CTX$I
  3  /

TOKEN_TEXT
----------------------------------------------------------------
A
H.M
HELLO
IS
P.L.C
TEST
THIS
WORLD

8 rows selected.

SCOTT@orcl_11gR2> SELECT * FROM mywords
  2  WHERE  CONTAINS (text, 'P.L.C.') > 0
  3  /

TEXT
--------------------------------------------------------------------------------
HELLO P.L.C.

1 row selected.

SCOTT@orcl_11gR2> SELECT * FROM mywords
  2  WHERE  CONTAINS (text, 'H.M.') > 0
  3  /

TEXT
--------------------------------------------------------------------------------
WORLD H.M.

1 row selected.

SCOTT@orcl_11gR2> SELECT * FROM mywords
  2  WHERE  CONTAINS (text, 'test') > 0
  3  /

TEXT
--------------------------------------------------------------------------------
This is a test.

1 row selected.

SCOTT@orcl_11gR2> DROP INDEX mywords_ctx
  2  /

Index dropped.

SCOTT@orcl_11gR2> BEGIN
  2    CTX_DDL.SET_ATTRIBUTE
  3        ('my_lexer',
  4         'punctuations',
  5         '?!');
  6  END;
  7  /

PL/SQL procedure successfully completed.

SCOTT@orcl_11gR2> CREATE INDEX MYWORDS_CTX
  2  ON mywords (text)
  3  INDEXTYPE IS CTXSYS.CONTEXT
  4  PARAMETERS
  5    ('lexer        my_lexer
  6        SYNC        (ON COMMIT)
  7        STOPLIST  CTXSYS.EMPTY_STOPLIST')
  8  /

Index created.

SCOTT@orcl_11gR2> SELECT TOKEN_TEXT
  2  FROM   DR$MYWORDS_CTX$I
  3  /

TOKEN_TEXT
----------------------------------------------------------------
A
H.M.
HELLO
IS
P.L.C.
TEST.
THIS
WORLD

8 rows selected.

SCOTT@orcl_11gR2> SELECT * FROM mywords
  2  WHERE  CONTAINS (text, 'P.L.C.') > 0
  3  /

TEXT
--------------------------------------------------------------------------------
HELLO P.L.C.

1 row selected.

SCOTT@orcl_11gR2> SELECT * FROM mywords
  2  WHERE  CONTAINS (text, 'H.M.') > 0
  3  /

TEXT
--------------------------------------------------------------------------------
WORLD H.M.

1 row selected.

SCOTT@orcl_11gR2> SELECT * FROM mywords
  2  WHERE  CONTAINS (text, 'test') > 0
  3  /

no rows selected

SCOTT@orcl_11gR2>

Determine the end of the month and then run the script

Hi all
OK, I'm stumped. I can get all kinds of data to date... but I did not find a way (or the same example script) that shows how to retrieve the end of the month.

Why?

I have a master script that runs as a scheduled task. It runs every day and call other scripts based on the date. It is great for things like weekly reports that I just used $dow = {get-date}. DayofWeek but I need to run scripts at the end of the month.
I can something together that gets the day, and then performs a logical ugly pop-based < or > but I don't know there's a smoother way to do.
As always, any help greatly appreciated.
See you soon

Hello, medalklector-

One way to do it, it is described by RMToups, Jr. at http://activelydirect.blogspot.com/2011/01/determine-last-day-of-month-in.html. You should be able to set the output to fit your needs. How does do for you?

Can the last word of the installation, I delete my old version of 2011?

As stated above, just bought the last Microsoft Word (and related applications that accompanies it). My old man is 2011. Once I installed it using the code accompanying it (do not buy the disc version), and once I am happy that my Word docs are happy, then I remove/uninstall my old Word 2011? Or should I keep it because my docs were created on this subject? I will soon migrate/upgrade to a new macbook air from my old macbook pro. Thank you.

I recommend you to uninstall before installing the new version.

All your documents will work fine with the new version.

https://support.Office.com/en-us/article/uninstall-Office-2011-for-Mac-4bfcd230-0ea1-4656-bf30-dbfa44d358fa

then a MBP 15 "2011 run the last OSX

Similar Questions

Maybe you are looking for