VI to run the .exe program

Similar Questions

• All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

  All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 2003 Server keeps stopping every hour on and saying that he must run the Setup program to create a domain controller.

  WINDOWS 2003 SERVER STANDARD EDITION

  HELLO TECH TECHNICAL SUPPORT ENGINEERS.

  WE HAVE WINDOWS SMALL BUSINESS SERVER 2003 STANDARD EDITION,

  WE HAVE EVEN INSTALLED AND CONFIGURED IN A WORKING GROUP, WE DO NOT WANT TO CREATE A DOMAIN CONTROLLER,

  BUT OUR SERVER IS BLOCKING DOWN IN ANY ONE HOUR AND SAY TO RUN THE SETUP PROGRAM TO CREATE THE DOMAIN CONTROLLER.

  PLEASE SUGGEST, AS WE DO NOT WANT TO CREATE DOMAIN

  CONCERNING

  DECCAN TEAM

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• shortcut for deskjet 8600 pro has disappeared. Re-run the installation program does not help. How can I get that back?

  When I bought and installed my Pro Deskjet 8600 in last July, a wonderful control program has been installed. However, the shortcut on the desktop for this program has disappeared, and I can't. Re-run the installation program does not help. How can I get that back. All I have now is an older version of the HP Solution Center, which does not have the features that I got into the habit of.

  Hello

  Uninstall the software by following programs > HP > HP Officejet Pro 8600 > Uninstall.

  Then download and install the latest version of the software below, it is a more recent software and should solve the problem you are experiencing:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4131&product=4323659&sw_lang=

  Shlomi

• I can't run the exe to my computer files.

  I can't run the exe to my computer files. The exe extension does not appear in the options of folder of my c: drive so I tried to add, but it will not save I tried to do a system restore, and even that won't work. I think it's a virus, but I can't seem to run to anthing that might help to get rid of it. Very frustrating... Help!

  I am running Windows XP with service pack 2 on a Dell computer

  Have you tried restoring system from a command prompt?

  Otherwise, restart the computer and start typing the key F8, select Safe mode with command option. If you are prompted to select an operating system, use the arrow keys to select the right pair and press ENTER. Log in as administrator or with an account that has administrator credentials.

  At the command prompt, type % systemroot%\system32\restore\rstrui.exe, and then press ENTER. Follow the prompts to restore your computer to an earlier date.

• I need to run the accounting program MYOB 9 on my new laptop HP 64 bit with Vista Home OS.

  I need to run the accounting program MYOB 9 on my new laptop HP 64 bit with Vista Home OS.  Is there a download that allows me to run from MYOB and emulate windows XP?

  You must upgrade to Windows 7 Professional to run Windows XP Mode

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  You can try to see if it will run in Vista compatibility mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• Can not run the .exe (not all exe) file

  Hello

  Have a problem when running the .exe file in windows 7.

  When I tried to open a 32-bit in my 64 bit OS setup.exe file, nothing happens at all. But when I tried the first time, a pop-up message displays this "want to re install using recommended settings. But after that, nothing happens. (the problem with only this file). But it works well in the other 32-bit OS. What should I do?

  Hello

  You can check this link troubleshooting steps:

  https://support.Microsoft.com/kb/2688326?WA=wsignin1.0

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps.

• Flash Builder on Mac Lion 10.7.5 4.6: cannot run the Setup program: certificate revoked

  Hello

  You are aware that FB 4.6 is not install more OS x 10.7.5 and maybe OS X in general?

  Because I really need design view last FB does not offer, I just downloaded 4.6 FB for OS X from Adobe: Adobe - Adobe Flash Builder 4: for Macintosh: Flash Builder 4.6 - Mac OS: thanks

  My real OS X is 10.7.5, Lion.

  Launch of the install.app, it appears an error window:

  

  Please be aware that I know that this message comes from Gatekeeper, see for example: OS X: on Gatekeeper

  The fact is that this problem is not solvable, apparently.

  The problem is with the application signing certificate, as you can see issuing the command:

  bash - 3.2 # spctl - has Install.app

  Install.app: CSSMERR_TP_CERT_REVOKED

  So, here we have a certificate of _revoked_, not a certificate/developer unknown or app unsigned.

  Indeed, unfortunately the problem persists even disabling Gatekeeper:

  bash - 3.2 # spctl - status

  co-pays disabled

  since apparently a revoked certificate is not an error that can be ignored or circumvented somehow.

  As far as I KNOW, the idea behind this is: Apple actually provide no verification quality on applications (they are not "approved by") but may possibly (if there are "problems") block a via the recall mechanism. Because of this, the _revoked? _ check cannot be bypassed/disabled. I'll try as soon as POSSIBLE an upgrade of the OS to see if with the Mountain Lion (10.8) I can possibly force execution Install.app, but chances appear to be rare so far.

  So, Adobe, can you help me please?

  Maybe sign with a certificate valid for this installer...

  FB4.6 is essential because it is the last version with DV. I had to install FB46 on Windows to keep working, but it's no doubt slow me down as everything is on Mac.

  ARO

  a pro developer.

  Hello all, good news: after updating to 10.8.5, Mountain Lion I was able to run the Setup program and all went well.

  Mountain lion allows the user force execution through the command open context menu (CTRL-click) and it works, just as simple as that.

  So my advice is: If you want to install or reinstall Flash Builder 4.6 on a Mac with Lion installed, updated to Mountain Lion or better to avoid problems.

  Apple introduced some (not all) Gatekeeper 10.7.3 and following features, but apparently you need a full-fledged 10.8 to also have what you need to work around a revoked certificate error.

  Since usually OS X has auto update active, if you run Lion you find with 10.7.5 and do not install FB46. If you manage to somehow hold 10.7.2 I guess you should be able to install FB46, sincerely I don't check it out. In any case, it is simpler and safer to move to 10.8.x.

  Good bye

• How to set the display in order to run the installation program

  Hello
  
  Could you please explain how to set the Display variable I connect via the VNC client directly to windows X Linux (Gnome)
  in order to run the installer to install R12 EBS?
  
  
  I guess that since the connection is by VNC client, so I just need to open a terminal window and start the Installation...
  
  
  
  Thanks and greetings
  MZ

  Srini Chavali wrote:
  The DISPLAY variable must be set to the IP address of the client.

  Not necessarily - it is meaningless to set the DISPLAY of different client IP addresses if you want to run the installation program (or any GUI) on the server of different customers.

  Thank you
  Hussein

• help on how to compile and run the awt programs

  any1 can tell how to compile and run the awt programs
  
  Published by: 863765 on July 18, 2011 03:29

  The same way you compile and run any other Java program.

• dbms_scheduler.create_job and create_program to run the shell program

  dbms_scheduler.create_job and create_program to run the shell UNIX of PL/SQL program
  
  I guess that the problem could be a shell program. "send_file_susin.sh", I did run the CFT program which is to transfer files. While I tried to this problem, I heard that I should use dbms_scheduler.create_program and create_job to execute the shell command. Therefore,.
  
  I've done
  () dbms_scheduler.create_program
  program name = > "SEND_FILE_SUSIN"
  program_type = > "EXECUTABLE."
  program_action = > ' / fsoracle/app/oracle/inst2/if_cft/send_file_susin.sh',
  number_of_arguments = > 0,
  enabled = > TRUE,
  Comments = > 'Test '.
  );
  commit;
  in a package, then I run the package.
  program and job
  
  DBMS_SCHEDULER exec. () CREATE_JOB
  job_name = > 'run_sh1 ',.
  program name = > "send_file_susin"
  start_date = > sysdate + 1/2880.
  repeat_interval = > null,
  End_date = > null,
  job_class = > 'DEFAULT_JOB_CLASS ',.
  enabled = > true
  )
  
  When I ran, I would check there program and job send_file_susin in the sched.programs and sched.job classes. The job will run about 30 seconds later.
  After 30 seconds, I saw the work was done, but I couldn't see the log of the CFT program. This means that the file have not been transferred...
  
  I don't know what is wrong with it... Please, someone that solve?
  Thank you very much in advance.

  Hello

  You don't have to create a program first, put directly in the work should work as well.

  Your pl/sql code is correct, then you should check out a few things with the shell script

  -is set + rx
  -is the first line #! / bin/sh
  -should I use the full path to the executable files for example/usr/bin/ftp
  -It defines the variables

  If that all seems well, consider adding lines of logging to your shell script to debug what goes wrong.

  See this post for more tips

  Guide to the external work on with dbms_scheduler 10g for example scripts, batch files

  Any other questions about the Scheduler, you can use the forum Planner here

  Planner

  Hope this helps,
  Ravi.

• Failed to load the exe programs or internet explorer, none of my programs work

  Vista does not load the exe files and a window opens to select the program to start with, then internet explore will not work and is to expire.

  Please run Doug Knox fix .exe (which is not a file .exe so you can run it) and then carefully swipe to the malware.

  http://www.dougknox.com/XP/file_assoc.htm
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 will not run the exe files correctly.

  I tried to open a file with Notepad as I thought Notepad was the right program to open it. I used the "open with" prompt and select Notepad. It did not open, but immediately after, all single exe files had a picture of Notepad open with notepad and say various gibberish.

  After that, I managed to get on chrome right on the PIN I had attached to the taskbar, and then selecting an of my favorites.

  I looked for solutions and tried two different solutions so far, regedit solution and the Fix It solution.

  Later, I thought that maybe adobe would be able to run exe files, he then began to show an image of the software adobe reader on exe files.

  Now, every time I try to open an exe it lands open adobe reader and sitting there without understanding.

  I have restart after trying all the solutions and am now at my wits end to know what to do.

  .exe, .lnk and other types should not be associated with any program. If you're wrong them associated with a program, it always opens that particular program with the file name as argument. You can reset the UserChoice registry key for this file type. Check:

  Restoration. Association of exe in Windows 7/Vista after incorrectly associating it with another program

  http://www.Winhelponline.com/blog/exe-file-association-Windows-7-Vista/

• PL/SQL to run the exe with the DB settings

  Hi all
  
  I have a little problem.
  
  I'm in the need to write that all connection, disconnection and connection fail data to the Windows application log. To do this, I already tried various solutions, but with my configuration (EE Oracle 10.2.0.4) and Windows Server 2003 R2 X 64 the only possible solution is (apparently) the following.
  
  I create a Table with the information I need:
  
  --------------------------------------
  
  CREATE TABLE logonaudittable
  (
  event VARCHAR2 (15).
  SID NUMBER,
  series # NUMBER,
  time DATE,
  name VARCHAR2 (30),
  osuserid VARCHAR2 (30),
  MachineName VARCHAR2 (64)
  )
  /
  --------------------------------------
  
  I have create a trigger for the connection data, one for logging for the logon fails:
  
  ------------------------------------------------
  
  LOGON trigger.
  
  Database of logonauditing AFTER logon ON CREATE OR REPLACE TRIGGER
  DECLARE
  MachineName VARCHAR2 (64);
  osuserid VARCHAR2 (30);
  v_sid NUMBER (10);
  v_serial NUMBER (10);
  
  CURSOR c1 IS
  SELECT sid, serial #, osuser, machine
  FROM v$ session WHERE audsid = userenv ('sessionid');
  BEGIN
  OPEN c1;
  EXTRACT the c1 IN v_sid, v_serial, osuserid, machinename;
  
  INSERT INTO logonaudittable VALUES ('CONNECT', v_sid, v_serial, sysdate,
  user, osuserid, machinename);
  
  CLOSE c1;
  END;
  /
  
  -----------------------------------------------
  
  Logoff trigger
  
  CREATE OR REPLACE TRIGGER logoffauditing
  BEFORE logoff ON database
  DECLARE
  MachineName VARCHAR2 (64);
  osuserid VARCHAR2 (30);
  v_sid NUMBER (10);
  v_serial NUMBER (10);
  
  CURSOR c1 IS
  SELECT sid, serial #, osuser, machine
  FROM v$ session WHERE audsid = userenv ('sessionid');
  BEGIN
  OPEN c1;
  EXTRACT the c1 IN v_sid, v_serial, osuserid, machinename;
  
  INSERT INTO logonaudittable VALUES ('LOGOUT', v_sid, v_serial, sysdate,
  user, osuserid, machinename);
  
  CLOSE c1;
  END;
  /
  
  -------------------------------------------------------
  
  Logon trigger FAILS
  
  CREATE OR REPLACE TRIGGER logonfailauditing
  AFTER ON SERVERERROR database
  DECLARE
  MachineName VARCHAR2 (64);
  osuserid VARCHAR2 (30);
  v_sid NUMBER (10);
  v_serial NUMBER (10);
  
  CURSOR c1 IS
  SELECT sid, serial #, osuser, machine
  FROM v$ session WHERE audsid = userenv ('sessionid');
  BEGIN
  IF (IS_SERVERERROR (1017)) THEN
  OPEN c1;
  EXTRACT the c1 IN v_sid, v_serial, osuserid, machinename;
  INSERT INTO logonaudittable VALUES ('FAILLOGON', v_sid, v_serial, sysdate,
  user, osuserid, machinename);
  CLOSE c1;
  END IF;
  END;
  /
  
  -------------------------------------------
  
  The I create a trigger that starts each time something is written on the table.
  This trigger must start an EXE file which writes the last data written on the table in the Windows application log.
  
  So I need a trigger that executes my WRITELOG. EXE file adding parameters. For example:
  
  Run WRITELOG. Event time username sid EXE
  
  So my program will write a journal in Windows with these data:
  
  Event: opening of SESSION
  SID: 2938473
  Time: 12/12/2011 11:45:32
  User name: Scott
  
  And so on.
  
  I already have the program that does this, I need to run the program with the right data directly from trigger or procedure performed by my trigger.
  
  Hope that I was clear and REALLY hope that someone can help me!
  
  Thanks to you all!

  So practically I should create a job something like this:

  BEGIN
  () dbms_scheduler.create_job
  job_name-online "CONNECTION."
  job_type-online "EXECUTABLE."
  job_action => ' c:\yourdirectory\FILE. LOGON EXE ' | v_sid | » '|| v_serial | » '|| to_char(sysdate,'MM/DD/YYYY') | » '|| the user | » '|| osuserid | » '|| MachineName |';
  number_of_arguments-online 1
  start_date => SYSTIMESTAMP,
  enabled-FALSE, online
  comments => ' SQL * Loader jobs Demo');
  END;
  /

  and then I need to start this work every time that the LOGON trigger fires and it must be the trigger that inserts into the work, the arguments v_sid, v_serial, etc..

  ... I don't know how I can do this. What I need to create a procedure that creates jobs and the procedure is executed by the trigger? and how do you know the procedure to create the job with the data provided by the trigger. Sorry I ask much for the help, but I need this thing made in a time which is not compatible with me studying how to do it by myself. I will look at it, I want to know exactly how these things work, but now I need to speed things up a bit!

  Thank you for all the valuable assistance tfor!

• When I run the exe file, it should load the niscope_32.dll why?

  Hello:

  I used scope in my program functions,

  and then I did it in the exe file and the installation file,

  but when I make them to another computer,

  To load the niscope_32.dll, what should I do?

  Hi ylongwu,

  You will need to install the driver OR-Scope on the deployment computer so that the code you can call the driver. You can download the driver from our Web site at drivers and updates the link below by searching our driver OR-Scope and choosing the appropriate version. I also recommend that you include the NOR-Scope driver as an extra Installer for your executable. In the setup of window construction there is a category called additional installers where you can choose the drivers and execution engines to install with your executable file. I've included a screenshot to show what it will look like for LabVIEW 8.x.

  Drivers and updates
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en