Then all HDDs to SSDS used with all servers of the UCS?

Similar Questions

• I bought a pc used with windows 7, however, the product key is not valid. I would like to get Windows 8. What would be my best course of action?

  I bought a pc used with windows 7, however, the product key is not valid. I would like to get Windows 8. What would be my best course of action?

  In my opinion your best course of action would be to buy and clean, install a license of system builders.

  You never know what comes with a pirate windows.

• Tables created in a stored procedure cannot be used with dynamic SQL? The impact?

  There is a thread on the forum which explains how to create tables within a stored procedure (How to create a table in a stored procedure , however, it does create a table as such, but not how to use it (insert, select, update, etc.) the table in the stored procedure.) Looking around and in the light of the tests, it seems that you need to use dynamic SQL statements to execute ddl in a stored procedure in Oracle DB. In addition, it also seems that you cannot use dynamic SQL statements for reuse (insert, select, update, etc.) the table that was created in the stored procedure? Is this really the case?
  
  If this is the case, I am afraid that if tables cannot be 'created and used"in a stored procedure using the dynamic SQL, as is the case with most of the servers of DB dynamic SQL is not a part of the implementation plan and, therefore, is quite expensive (slow). This is the case with Oracle, and if yes what is the performance impact? (Apparently, with Informix, yield loss is about 3 - 4 times, MS SQL - 4 - 5 times and so on).
  
  In summary, tables created within a stored procedure cannot be 'used' with dynamic SQL, and if so, what is the impact of performance as such?
  
  Thank you and best regards,
  Amedeo.
  
  Published by: AGF on March 17, 2009 10:51

  AGF says:
  Hi, Frank.

  Thank you for your response. I understand that the dynamic SQL is required in this context.

  Unfortunately, I am yet to discover "that seeks to" using temporary tables inside stored procedures. I'm helping a migration from MySQL to Oracle DB, and this was one of the dilemmas encountered. I'll post what is the attempt, when more.

  In Oracle, we use [global temporary Tables | http://www.psoug.org/reference/OLD/gtt.html?PHPSESSID=67b3adaeaf970906c5e037b23ed380c2] aka TWG these tables need only be created once everything like a normal table, but they act differently when they are used. The data inserted in TWG will be visible at the session that inserted data, allowing you to use the table for their own temporary needs while not collide with them of all sessions. The data of the TWG will be automatically deleted (if not deleted programmatically) when a) a commit is issued or b) the session ends according to the parameter that is used during the creation of the TWG. There is no real need in Oracle to create tables dynamically in code.

  I noticed that many people say that the "Creation of the tables within a stored procedure" is not a good idea, but nobody seems necessarily explain why? Think you could elaborate a little bit? Would be appreciated.

  The main reason is that when you come to compile PL/SQL code on the database, all explicit references to tables in the code must correspond to an existing table, otherwise a djab error will occur. This is necessary so that Oracle can validate the columns that are referenced, the data types of those columns etc.. These compilation controls are an important element to ensure that the compiled code is as error free as possible (there is no accounting for the logic of programmers though ;)).

  If you start to create tables dynamically in your PL/SQL code, so any time you want to reference this table you must ensure that you write your SQL queries dynamically too. Once you start doing this, then Oracle will not be able to validate your SQL syntax, check the types of data or SQL logic. This makes your code more difficult to write and harder to debug, because inevitably it contains errors. It also means that for example if you want to write a simple query to get that one out in a variable value (which would take a single line of SQL with static tables), you end up writing a dynamic slider all for her. Very heavy and very messy. You also get the situation in which, if you create tables dynamically in the code, you are also likely to drop tables dynamically in code. If it is a fixed table name, then in an environment multi-user, you get in a mess well when different user sessions are trying to determine if the table exists already or is the last one to use so they can drop etc. What headache! If you create tables with table names, then variable Dynamics not only make you a lot end up creating (and falling) of objects on the database, which can cause an overload on the update of the data dictionary, but how can ensure you that you clean the tables, if your code has an exception any. Indeed, you'll find yourself with redundant tables lying around on your database, may contain sensitive data that should be removed.

  With the TWG, you have none of these issues.

  Also, what is the impact on the performance of the dynamic SQL statements in Oracle? I read some contrasting opinions, some indicating that it is not a lot of difference between static SQL and SQL dynamic in more recent versions of Oracle DB (Re: why dynamic sql is slower than static sql is this true?)

  When the query runs on the database, there will be no difference in performance because it is just a request for enforcement in the SQL engine. Performance problems may occur if your dynamic query is not binding variable in the query correctly (because this would cause difficult analysis of the query rather than sweet), and also the extra time, to dynamically write the query running.

  Another risk of dynamic query is SQL injection which may result in a security risk on the database.

  Good programming will have little need for the tables of dynamically created dynamically or SQL.

• can I download an Evernote Web Clipper for use with firefox Mobile for the droid?

  Is there an Evernote Web Clipper I can download to use with firefox mobile?

  It does not resemble a version for Firefox mobile. You can ask Evernote to support mobile Firefox in their extension. https://www.EverNote.com/about/contact/support/

• HP ENVY M7: M.2 SSD use with HP Envy M7-n011dx

  I recently bought the HP Envy M7-n011dx, with the hope of being able to install an ssd inside M.2 to start from but also run my programs.

  After reviewing the manual for it, I found it was in fact the port for the SSD, however, looking through the forums I am now more confused then ever know if this laptop has the active port m.2.

  Before I go and order any material or try to take the computer hand after the purchase, I was hoping someone could let me know if this particular model allows the use of the DSS m2.

  My research seems to show that n0xx models have active port where n1xx models do not have.

  Does anyone have any ideas or comments?

  Not exactly. The manual says this about it:

  SSD conƭgurations (for i7 + GTX PCA) ● 512 GB m2 SATA SSD (TLC) ● 128 M2 of GB SATA-3 (TLC) ● 128 M2 of GB SATA-3 (TLC) value

  While the models with an i7 + graphic GTX, that is to say the 950M has a port of m2 and I think yours is 940 M.

  I followed this M.2 debacle here since the beginning, and here's what we saw. models with a port of m2 which is dead, disabled. Models that have a port M.2 clearly described in the manual, but when you open the case, you will only find traces for a m2 but no real port welded to the.

  So I strongly hesitate to give advice on adding a player of m2 to any HP laptop which didn't plant it. It's the only way you can be sure that it will work 100%. If you're brave, at the very least, open it first and check if the mounting material is really there. Do not order the m2 before the laptop drive even comes to your door, as many people did, to their disappointment and expenses.

  The only way that a m2 is a "gotta have" If you can use a version of NVME PCI - e, not SATA. SATA based M.2s are not significantly faster than a good old 2.5-inch SSD SATA-III we can say absolutely not work. And that's another story altogether: what models can accept a M.2 NVME?

• Can I put some PFI ports on the same line for use with counters and leave the rest as static DIO? (USB-6218-USB)

  I only need a port of each line for the use of the PFI and want to use the rest for the digital I/o. Before you complete the design of the circuit and test it myself, I would like to check it out. I can't find the answer in the textbooks, either.

  Thank you

  Ben

  Hello Ben,

  If you use all the PFI lines you can use the rest as DI/O. PFI0, 1, 2, 3, 8, 9, 10, 11 are entered digital and PFI 4,5,6,7,12,13,14,15 outputs digital. Another technique you can use is to create a spot on the measurement and Automation Explorer, if it allows you to create it, then it is possible.

  Best regards

• WWN of all servers in the cluster

  Hello

  Is there a way to the cmd line, I can get all issues of wwn on the esx Server? I know mpath will do this, but there are 8 knots in my group and I was wondering if there is a way to do it?

  Thank you

  You can also take a glance to the VMware v0.9.5 health check report

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Firefox does not correctly close after use with Thunderbird, is at the end of the task with the Manager tasks

  After clicking on a link in Thunderbird e-mail, Firefox opens the first time, but after the closure, I am unable to open it again, as it says that Firefox still works even if it isn't. The process runs as indicated by the Task Manager again and I at the end of task to reload Firefox.

  Have reinstalled several times, but no glance. So far, it seems to happen after the opening of Firefox via Thunderbird.

  Any help to solve this problem would be great because I don't want to resort to the use of IE

  Yes, this sounds like Bug 1005487. Comment 36, it is said that the bug is not reproducible on the latest beta version. Other users have reported that the problem has been fixed in Firefox 30 beta8. You can go ahead and download the latest beta version to see if the problem stops there. I'd like to hear if it is resolved.

  • http://www.Mozilla.org/Firefox/beta/

• Can I upgrade my membership for use with 4 computers at the same time?

  I have an Adobe membership and I use it very well on my computer

  Now, more people are joining in and I think to upgrade my membership to use it on 4 computers at the same time.

  Kindly advice if this is possible and how to do it.

  Kind regards

  Issam

  Hi Issam

  Each user must have their numbers, so they each need to register using a unique ID for Adobe.

  We also have team members that provides additional storage central license management - https://creative.adobe.com/plans

  Kind regards

  Bev

• Upgrade to Server 2008 R2 HDD to SSD with minimal downtime

  Hello

  I would like to know the most effective way to migrate an installation of operating system Windows Server 2008 R2 to a RAID1 HDD RAID 1 SSD

  We are currently using Dell R710 servers and the operating system is installed on 2.5 "15 K SAS drives in a RAID 1 configuration.

  Thanks in advance.

  Backup and restore is the only way.  You CAN insert the SSD, create the RAID 1, then clone/backup/restore directly on the SSD RAID 1, rather than to external media, first, and then for the SSD, but because the HDD/SSD / SAS/SATA cannot be mixed in an array, you really have no other options.

• Problem with creating numbered lists the paragraph style...

  I have a numbered list, using "bullets and numbers" paragraph style But I don't know how to get the numbering to work properly.

  If I set the "mode" to "continue from previous" mode, whenever I use this paragraph style continuous numbering since the last issue of the previous list using this style.

  If I put the 'mode' for ' start in ' a number, say '1', then all numbers in the list are this number.

  I want that each list is independent of the final list. The only thing I can understand is to create a new paragraph for each list style, but which does not seem a good way to go.

  I have been exploring for some time but have not been able to understand this.

  Place the cursor inside your paragraph of the list where you want than to restart numbering.

  Choose from the menu:

  Type > bulleted & numbered lists > restart page numbering.

  Torben.

• Folders faster back online rather than with or depends on the situation

  Hello
  
  I have used with many requests for better readability. This latest request seems to take a little more time to run and
  I don't think much up to what a colleague showed me their version (completely different sql statement), which ran faster, but seemed
  more complicated and had more lines of code. I noticed that the other version has not used with. I moved the sql code of the with in
  the join and the query ran a faster drop from 30 seconds to 798 ms. The question is I am sacrificing speed for better readability of
  using with or it really depends on the overall sql statement.
  
  Here is the query using WITH:
  

  with prev as
  (
  select person_uid, id, name, academic_period,
           case when enrolled_ind = 'Y' and registered_ind = 'N'  and student_status = 'AS' then 0 else 1 end as enreg_stat,
           row_number () over (partition by person_uid
                               order by academic_period desc) as rn, student_status
  from academic_study ac
  where substr(academic_period,-1) = '0'
        and case when enrolled_ind = 'Y' and registered_ind = 'N'  and student_status = 'AS' then 0 else 1 end = 1
  )
  select aa.person_uid, aa.id, aa.name, aa.academic_period, aa.latest_decision, aa.college, aa.program,
         prev.academic_period as prevterm,
         prev.student_status, ad.aid_year, sum(ad.total_paid_amount) as Amount_Disbursed, sysdate as date_updated
  from admissions_application aa
  left outer join award_by_aid_year ad
     on  aa.person_uid = ad.person_uid
     and aa.aid_year   = ad.aid_year
  left outer join prev
     on  aa.person_uid = prev.person_uid
  where substr(aa.academic_period,-1) = '5'
      and aa.academic_period between &TERMSTART and &TERMEND
      and (aa.appl_accept_any_time_ind = 'Y' or aa.inst_admit_any_time_ind = 'Y')
      and prev.rn = 1
  group by aa.person_uid, aa.id, aa.name, aa.academic_period, aa.latest_decision, aa.college, aa.program, prev.academic_period, 
               prev.student_status, ad.aid_year

  Inline version:

  select aa.person_uid, aa.id, aa.name, aa.academic_period, aa.latest_decision, aa.college, aa.program,
         prev.academic_period as prevterm,
         prev.student_status, ad.aid_year, sum(ad.total_paid_amount) as Amount_Disbursed, sysdate as date_updated
  from admissions_application aa
  left outer join award_by_aid_year ad
     on  aa.person_uid = ad.person_uid
     and aa.aid_year   = ad.aid_year
  left outer join 
  (
           select person_uid, id, name, academic_period,
                    case when enrolled_ind = 'Y' and registered_ind = 'N'  and student_status = 'AS' then 0 else 1 end as enreg_stat,
                    row_number () over (partition by person_uid
                                          order by academic_period desc) as rn, student_status
           from academic_study ac
           where substr(academic_period,-1) = '0'
               and case when enrolled_ind = 'Y' and registered_ind = 'N'  and student_status = 'AS' then 0 else 1 end = 1
  )
   prev
     on  aa.person_uid = prev.person_uid
  where substr(aa.academic_period,-1) = '5'
      and aa.academic_period between &TERMSTART and &TERMEND
      and (aa.appl_accept_any_time_ind = 'Y' or aa.inst_admit_any_time_ind = 'Y')
      and prev.rn = 1
  group by aa.person_uid, aa.id, aa.name, aa.academic_period, aa.latest_decision, aa.college, aa.program, prev.academic_period, 
               prev.student_status, ad.aid_year

  user1069723 wrote:

  I moved the sql code of the with in
  the join and the query ran a faster drop from 30 seconds to 798 ms. The question is I am sacrificing speed for better readability of
  using with or it really depends on the overall sql statement.

  It can happen - I wrote about this a couple of years (http://jonathanlewis.wordpress.com/2010/06/29/subquery-factoring-3/), but don't think it would still be a problem with 11.2; However, you use ANSI and the transformations made by Oracle to manage ANSI combined could have caused the missing cycle of transformations (or find) a strategy that made the difference (transformation quirks with ANSI have quite frequently on the forum). Technically, it seems as if the weighted subquery must have been moved, inline - but maybe it wasn't, or maybe it was but after that ANSI transformation had taken place, leading to the optimizer missing a secondary processing. Until we see the plan of execution, we can not say more than that.

  Update: here is another example of the problem that might be relevant, given your outer join: http://jonathanlewis.wordpress.com/2010/09/13/subquery-factoring-4/
  Concerning
  Jonathan Lewis

  Published by: Jonathan Lewis January 16, 2013 21:43
  Add second example

• I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site? "

  I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site?

  If you select that right click menu context then you block all images from this area and not a specific image, so do not use that.

  • Check exceptions in tools > Options > content: Load Images > Exceptions (for example sphotos.ak.fbcdn.net)

  You can use the following steps to check if the images are blocked:

  • Open the web page that has the missing images in a browser tab.
  • Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll down through the list with the arrow down.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• I just upgraded from the LR5 LR6 on my Macbook Air to OS 10.9.5. LR5 photos 38K, especially on an SSD connected with 2 years on an internal hard drive, gave a 48 GB LR5 catalog. From LR6, I decided to import all the photos of 38 K stored on my SSD to form

  I just upgraded from the LR5 LR6 on my Macbook Air to OS 10.9.5. LR5 photos 38K, especially on an SSD connected with 2 years on an internal hard drive, gave a 48 GB LR5 catalog. Starting LR6, I decided to import all the photos of 38K stored on my SSD to form the LR6 catalog, but it is now 108 GB. Is he aware would be so much bigger than LR5 LR6 catalog? Should I redo, selecting the LR5 catalog to import to the LR6?

  I don't pretend to re-do an import, I do not import or re - import at all.

  You can delete the catalog Lightroom 6 and his insights that you created. You want to have the Lightroom 6 to upgrade the 5 Lightroom catalog file. Use the file-> open catalog and point to the 5 Lightroom catalog file. Once it is successful, you can also delete or archive the 5 Lightroom Catalog and delete its previews. As a piece of advice, never re - import photos. NEVER, as in... do not, do not, don't go anywhere near it.

  Regarding the size of the preview, you can control this in Lightroom under the catalog tab file management settings.

• When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas?

  When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas? I am running Vista and office 2007. I tried all the Windows solutions but nothing works

  Hello Stephen,

  You happen to have another system that you can try to download the fixit on and then moving on a USB? You can also try this fixit as well: http://support.microsoft.com/kb/971058