There are 4 Windows XP update (KB2446704, KB2418241, KB979909 and KB82168) with problem
There are 4 Windows XP update (KB2446704, KB2418241, KB979909 and KB82168) that no matter how many times I install the (via Live update or the Microsoft update site) and successful installation message indicated, as soon as I turn the computer (allowing updates to install) and turn on again, such updates recur as I never installed them before (this happens now not more than 20 times). I don't know what the problem is and it became a nuisance.
Hello
1. you receive messages or error codes?
You can read the following article and check if it helps:
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339
Hope this information is useful.
Tags: Windows
Similar Questions
-
Windows Update continues to not settle six updates, KB2572073, KB2518864, KB2539631, KB2418241, KB979909 and KB982168. Every time, when I turn off, these same six updates appear to be installed. The routine runs showing that each update has been installed. I don't get the error messages. It seems that every time that updates are installed correctly, but the next time I turn it off, the six are to be installed again and again. Can someone help me? This problem is surface the last part of the month of October, and I have not found a way to overcome the problem.
If you have run this tool: http://support.microsoft.com/kb/947821 and looked at the generated log to see if there is a specific corrupt file?
-
Download Windows 10 updated, it is 99% and hangs there.
Original title: Windows 10 Doiwnload
Download Windows 10 updated, it is 99% and hangs there.
I left the computer now for about 14 hours of the night, but is still 99%.
Help please.
If it is just the download bit and haven't started to install anything yet, then you can try the upgrade by using the multimedia creation tool - https://www.microsoft.com/en-us/software-download/windows10 and see if this method is not better.
Its always wise to backup everything first (at least all your important data - docs, bookmarks, videos, music, emails etc.) before upgrading the OS. Although they must all be left in place, if something goes wrong they may be. If you have a backup, you can find them. If you do not, you can't.
Also, follow the UPGRADE path listed in the article for the free update, not the own installation path.
-
Since the Windows 10 update, Adobe Reader XI and Microsoft Edge forms are not complete when opening a Web site. Why should I register to my computer before can fill them?
Hi kay3452,
Microsoft Edge is not compatible with the Acrobat/Reader plugins. Please try other web browsers.
Kind regards
Nicos
-
Windows 8 for Windows xp update fails at 90% and does not start.
I read the below and see if there are solutions.
I paid for 1 hour to help Microsoft Tech to take on my desktop computer and at the end
He said there are so many chat lines, he could not follow after clicking on install.
He beat anything, antivirus, I disconnected all devices except the mouse and keyboard.
Of course the update, which I downloaded and confirmed with their diagnosis that the
computer has been updated failed 90% and would not restart.
When I went to system logs, I even tried to disable restore.
Nothing helps.
I think there must be something which is not allow restarting after installation.
The message just says: failed to install. No diagnosis or whatever it is.
If a Microsoft technology, which grabbed my computer couldn't do work I'm close to trying to get
my money back and stopped a complete package. I don't have to Microsoft backup disk, which
I'll try again.Once again: problem is installation of Windows 8 reaches 90% and then only will fail.
... Install only Windows 8 reaches 90% and then fails.
Windows Update has nothing to do with the upgrade a Windows XP-based computer or install Windows 8 (.1).
Please post future questions about the installation of Windows 8 in this forum-online http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install
If you try to install Windows 8.1, post your questions in this forum-online http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install
Good luck!
-
recently purchased Acrobat Pro for Mac, but who also want to put it on a PC. There are several places so I can do this and I can use it on both Mac and PC? I don't think I can ask my boss to spend another $485 so I may have to go with another drive, if I can't use it on multiple systems.
A version bought the current version (Acrobat DC Pro) can be exchanged, so you should be able to run on Windows or Mac. But never both. You can then run it on two machines for your own personal use (do not share).
A subscription version can be installed on two computers. Windows or Mac. For a person.
More complex arrangements are pointing to a need for volume licenses.
-
NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.
Message that appears is: -.
Windows has stopped this device because it has reported problems. (Code 43)
BB
Install the latest driver from nVIDIA:
http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html
http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
I want to burn files to a cd, there are two files, one is 8.1 GB and the other is 3.5 GB, what capacity of CD should I buy to take account of these files, or is there any method I can use?
First of all, you cannot use a CD for each file - they do not provide enough space (and I'm pretty sure same compression help not enough).
You can burn the 3.5 GB on DVD or DVD-R DVD - RW file, as long as it's a guy with enough space http://en.wikipedia.org/wiki/DVD.
8.1 GB file CAN be turned into a DVD, but you need a very special type (and maybe special software - I'm not sure about this). An article on the different types of DVDs and their abilities of here: http://en.wikipedia.org/wiki/DVD.
There are a few 3rd party software products that allow you to split a large file inot several pieces to fit on a game sequenced CD, but I couldn't find one that was free. To do this, you can check on www.download.com, www.tucows.com, Bing, and Google.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I'm lost here. I left a message in the discussions [4 years PS E7 problems developing -?] and he was moved to the "Forum elements. Yes, I was wrong. I come here and there are about a dozen question back 4 hours and no sign of page numbers. Not a total newbie to forums, but I'm lost. 8-)
I searched "4 years PS E7 developing problems...» "and couldn't find even in Discussions and notifications that it has been moved. I would have thought that a search would have led me on the Forum of items with notes as to how much, if any, had read it. This is what I'm used to. As I said, I'm lost. Sorry if it should be obvious, and if I look like a whiner.
Viewerx wrote:
Oh, so it has been moved, but still listed in the Discussions? You could say that.
When a thread is moved, it will also appear in its place of origin for a short period in order to allow the original poster to find.
I didn't know where it was posted. I'm not a moderator and couldn't have moved it. Only, I went to your profile and watched your activity:
-
I've loaded a service pack when I installed CC 2014 on Windows 8.1 but now that my computer is running on Windows 10, shouldn't there be a service pack update? It seems like everyone using Adobe programs that are passed to 10 WIndows knows problems that maybe set a new service pack?
Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html
-In addition, only CURRENT products will be tested and updated for compatibility with Windows 10
- so if you have an older program, update you to Windows 10 at YOUR risk of problems
For Win10, I think this means that CC2014 will not "fixed" because the "fix" is the most recent version
-
Windows 7 updates down to 15% and I had to reinstall Windows XP
Hi all, when I started windows 7 it marked updates service pack and he stopped at 15%. I restarted my pc, windows logo appeared, but he has not started, now I have to paste XP and Opera again... The problem is that on XP, I can't develop my minecraft mod
Help fix? Should I reintall 7?Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)Select the disk partition where you want to install Windows 7 click Next.
You will receive the following warning:
The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
(At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK
The installation program will now begin installation. During installation, your computer will be restarted several times.
Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.
You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.
-
I have a serial number for CS6. but it does not work. I noticed that there are several versions of CS 6. I downloaded 'standard design', but it did not work. Which version goes with serial number [removed]?
Thank you
Bill Heinsohn
Check your Adobe account online. If you have registered the software version should be shown there.
Never share your serial number publicly... anyone can use it.
-
I work for an agency after the output of devices in our production environment, the IPad can be connected to wifi or an instance connected to iTunes. I want to update these devices, but as you can see in my first sentence the traditional way is not allowed from a security point of view. Any help would be greatly appreciated.
Care - Apple IPad Air (1st generation)
-in the course of running IOS 6.1.6
-put to update to the current version
Windows based ITunes (ready to use the version that is never recommended)
There is a conflict here:
-or an instance connected to iTunes
-Windows based ITunes (ready to use the version that is never recommended)
The second sentence implies that you intend to update via iTunes which is in conflict with the first part.
What is the problem? You want to update the devices. You can update without wifi. There are two ways without wifi: cable ethernet or usb to a computer.
{It is not a coincidence. You can connect via ethernet cable.
connect the ipad to ethernet }
You must be careful with updates. You can't go back after the update. The importance is the iPad to your operation? You can just buy a new ipad and Exchange once you think you have this work.
R
-
Fix updates KB2518864 & KB2478658 will not install and have a problem. How to solve this action? This fix tries to install when arrested computer, but when the computer is turned back on, there is a box which reads:
Patching HOTIRON Setup has encountered a problem and needs to close. We are sorry for the inconvenience.
Hi MrGreener,
1. did you of recent changes on the computer?
2 are you able to install all other updates on the computer?
3. do you have security software installed on the computer?
4. you receive an error message while updates?
Method 1
I suggest that you manually download and install updates, check if it installed correctly on the computer.
Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26323
Security Update for Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26427
See also the articles below to learn more about known issues for both updates and check if it helps.
MS11-044: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun
http://support.Microsoft.com/kb/2518864
MS11-039: Description of the update of security for the .NET Framework 3.5 Service Pack 1 and the .NET Framework 2.0 Service Pack 2 on Windows XP Service Pack 3 and Windows Server 2003 Service Pack 2: Jun
http://support.Microsoft.com/kb/2478658
Method 2
If the previous step fails then I would suggest that reset you the default Windows Update components and later try to install updates.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 3
If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
HI guys, I hope you can help or at least give a point in the right direction. I am a freelance photographer with a large part of the suite creative Adobe CS6. After a disaster of a week, I came home to find the motherboard on my editing station is fried somehow. I don't know what happened though I wouldn't put past my inattention of roommates.
I'm desperate. I have to finish my current job until I'm able to afford to buy a replacement. So I have to rely on stop-gap measures, in desperation to finish my project, that are less than ideal, but so far are doing better than I'd hoped.
Im a photographer, Capture One, Adobe Photoshop Lightroom, Adobe Photoshop and Premiere Pro are the go for workaholic applications that I need to work. without them I have no income. in order to have this machine run these applications,
the machine I have left is an old hp 550 that was gathering dust in the closet. It was built for 32 bit Win XP and in no case is designed to run adobe products food pork I use, particularly of Lightroom.
Unfortunately PS with Lightroom and first are 64-bit programs and LR and first are hyper threaded. so I did some research and with the help of the list of the utility windows 7 Advisor to upgrade instructions, I was able to get windows 7 Pro 64-bit to install and run.I know that this is not the ideal machine or the situation, but for a few weeks, I need to make it work.
I really just 2 simple questions. First of all, I went to the HP technical support. but they were not useful. as the guarantee of the laptop are long gone, they would be not even polite and basically told me to shove off. Then on another forum, I called back and comes with a knowledge it all who constantly insisted on the fact that there was no way no how this pc could run 64 bit win 7, which i thought what am I seeing things? It works very well for 3 months. So I decided to come to you. your forums were useful on many occasions.
Basically, I need this machine to run these programs during the next month or two, until I can buy a new machine.
essentially, what I want to know, it's the motherboard support an upgrade of the processor? and if anything goes, what do you suggest as a substitute, given my needs? The Core 2 duo is the bare minimum of what I can limp with like photo/video rendering times are excessively slow.
then I was talking to the support staff essential tech upgraded memory. and possibly set the bios to force to run 8 gigs of ram. They said that they have cold cannot find any version of bios that would make that possible, but only by forcing already run 64 bit, which has already allowed the pc to use the full 4 GB of ram, which was impossible in the 32-bit format. He suggested that I buy 2 4 gig modules such as 4 GB DDR2 PC2-5300 unbuffered NON - ECC, 1.8V 512Meg x 64 which can be seen at http://www.crucial.com/usa/en/memory/ct51264ac667 and try to install the full 8 concerts and see what would happen, saying that he had a feeling that I might get lucky. his logic is that the 64-bit system already open the ram limits and who knows, you can't make an omelet without cracking of eggshells! It seemed very optimistic. So, what do you think? It seems likely you because I love to work. or do you think the guy was a quack? and this whole endeaver is a waste of time and money?
also, any other suggestions on how to time this month long storm that do not involve suggestions of buying new machines would be appreciated!
so that you have accurate details below are my system specs.
Hewlett-Packard HP 550 F05
System serial number: CNU90716GN
Inventory number: CNU90716GN
Chassis serial number: CNU90716GN
Case type: portableWindows 7 Professional (x 64) Service Pack 1 (build 7601)
Install language: English (United States)
Local system: English (United States)
Installed: 04/08/2014-18:21:11
Start mode: BIOS (Secure Boot not supported)Processor and b main circuit
1.80 GHz Intel Core2 Duo processor
cache of 64 kilobytes main memory
secondary memory 2048 k-cached
64-bit ready
Multi-core (2 total)
Not hyper-threaded Board: Hewlett - Packard 3618 KBC Version xx.xx
The bus clock: 200 MHz
BIOS: Hewlett-Packard 68MVU worm. F05 19/01/2009Readers of memory Modules c and d
2320.47 GB drive hard usable capacity
959.16 gigabytes of free disk spaceHL-DT-ST DVDRAM GSA - T50L ATA Device [scanner]
Hitachi HTS543216L9A300 [hard drive] (160,04 GB) - drive 0, s/n 090108FB0200VCCPYM3B, rev FB2OC40F, SMART location: healthy
ST1000LM 024 HN-M101MBB USB Device [hard drive] (1000,20 GB) - drive 3
ST310005 USB Device [hard drive] 28as - 1 player
WD 1600JS external USB Device [hard drive] (160,04 GB) - disc 2, s/n WD - WCANM2342148 4088 usable MB installed memorySlot ' DIMM #1' has 2048 MB (serial number 0000202 A).
Slot ' DIMM #2' has 2048 MB (serial number 00004042).Thank you friends! I can't wait to read your tips!
Jodie
Here is the Manual:
Unfortunately, the maximum configuration is a processor T5670 1.8 ghz and 4 GB of DDR2-667 memory, you already have. The CPU includes the 64-bit instructions is not surprising, that it can run Windows 7 64-bit. My best advice is to save your money for when you can get a real working machine. The only other likely to help is a solid state drive, you might use in the laptop and then also use the new computer that you intend to buy.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
Maybe you are looking for
-
Req | 5.7 beta Skype.
So, apparntley, it's the version I want, and I can't seem to find it anywhere. can someone give me a download link? I found something on the Skype website, but whenever I install it, it installed the new version.
-
I need product key for Microsoft and 2009 streets trips
I need product key for Microsoft and 2009 streets trips
-
get pictures from my camera to my computer
Hello. I connect my camera to the back of the tower and when I turn the camera on nothing happens
-
Native sdk installation problems
-Downloaded SDK native gold -Installed on E:\BBndk -On the road Got "cannot start Java VM" has recognized this problem so I changed the configuration setting of -Xmx1024 to-Xmx512 Eclipse starts ok. Get the message: "No SDK can be found. Install a so
-
Changes of State DMVPN intermittent dmvpn
We run a double DMVPN hub and spoke configuration using the router ASR for hubs and 2811 routers for the spoke routers. Have passed us recently 3000 remote sites and discovered a problem in which we struggle with. On some routers spoke (we don't kn