There is no possibility to save, create or discover any php file

Similar Questions

• is it possible to save the clip markers in the file of prelude

  I want to be able to pass on the work I did as a prelude to someone else, especially if there is a lot of material to open a session

  Hi dudeclaudeapollon,

  You have the following:

  1. Select the subitems in the project Panel and go to--> export--> media file

  2. or you can add all the necessary for a scripted sub-elements. and go to file--> save Ruffcut ACE. Ruffcut will be exported. This scripted then be ingested as normal media files and all subelements attached to it would be available in the project Panel.

  Thank you

  MILIN

• Is it possible to save your project who keeps only files that are used in the order and get rid of files that you do not use?

  my project is at an advanced stage now, a lot of media loaded up and its got to the point where the project keeps "forgetting" his makes (the line goes to yellow when it should be green)

  I assume that this may be due to the face that I have a lot of media loaded upward there now, including many from the effects of exports which should be large enough

  so, I would like to save the project or export the project in such a way so that it retains only the bare minimum of files that im actually... better still, use if she maintained only the part of the files that are used and stripes out of the rest, but maybe it's wishful thinking?

  I also wonder if I could save the project, bringing files in a separate folder, only the files used in the project

  I'd love to, having someone take the time to clear this up for me.  Thank you

  Project Manager in the file Menu

  Backup first carefully!

• Is it possible to save, Illustrator 5.5, Illustrator 4 file?

  I want to buy the new CS 5.5 but all my colleagues have CS installed 4. What happens when I save a file in 5.5 and someone wants to open in CS 4?

  suntrop,

  Can you downsave to CS4 with no problems, just using normal recording options.

  Obviously, you should save as CS5 and downsave copies only. in this connection, you can use the option to save a copy (which you can also use for PDF files).

  New in CS5 will be dumbed down, of course, and some things may not work (of your choice). Lower register, the largest losses. 10 (one before last CS) the text engine was completely different (there has been changes in the CS series, too), this text breaks pretty much when you jump on this abyss (I'm still on the other side myself).

• Harassed by "save changes" dialog box in PHP file Live View on DW CC 2014?

  Hello

  I am being constantly harassed by the dialog "save changes to < document name >' when I'm working in Live view on DW CC 2014. Every time I have changes to the code, especially if I use the properties toolbar, I was immediately prompted to save the changes. I realize the rendering system account must have a recorded document to view from, but this happens after every single little change. If I look at watching the live view and decide to make some changes to the code I can get invited several times while I make these changes and it is not until the changes are finished I want to check live view again (when I save the document), but I have to keep stopping to reject dialogue! This means that I must keep turn off live view to make relatively small changes, and then turn it back on.

  I've always been able to work OK in this way on all previous versions using the 'Preview using temporary file' parameter, but this version works the same way. I'm not bothered if I save the file when changes are made in order to update the live view, so just remove the dialog box would be a decent solution.

  Thanks for any help

  Hello

  Turn it off in "View > Live View Options"... automatically uncheck "synchronize remote files.

• Hello, I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices. Thank all participants in advance of the availability, I offer cordi

  Hello

  I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices.

  Thank all participants in advance of the availability, I offer cordial greetings.

  Post edited by: andreava

  No preference, but there is a solution. See moving backup iOS device. See the rest of the tip of the user to do a split cell library if the library files and the media folder are on different drives.

  TT2

• Today, only with Firefox open, I get a constant strong siren (like Super Mario). I uninstalled then reinstalled... siren always there. I didn't Remove Favorites, what should I do? Is it possible to save my favorites until I kill them? More importantly,.

  Today, only with Firefox open, I get a strong Mermaid CONSTANT (like Super Mario). I uninstalled then reinstalled... siren always there. I didn't Remove Favorites, what should I do? Is it possible to save my favorites until I kill them? Will be more important, killing personal settings and then reinstalling cure the mermaid?

  This has happened

  Each time Firefox opened

  Is May 21, 2010, when I opened Firefox 3.6.3

  You have the Cool Previews installed addon? Google has a Pacman game on their homepage today and I had to uninstall the addon and the siren noise stopped.

• Possible to save the file to the client?

  Hi people,
  
  Is it possible for a customer to take, say, Flex content textual content in the flex application, create a .txt or .xml file and launch the dialog open/save/cancel the browser without involving a server?
  
  Thank you!

  Thank you, Greg.

  I am famaliar with shared objects. I'm sure there are reasons of security to have this configuration in this way, but still seems strange to me that I can't already data in the client (and so in the memory of the client) on the computer of the physical client as a normal file. I guess it must have something to do with the execution of malicious code?

• Is it possible to save a layout of the custom toolbar?

  Is it possible to save a layout of the custom toolbar?

  Print the help to the page layout, I can pretty well do memory...

  Once you have freshly generated the page layout you want

  1. Open your profile folder by typing about: support int the address bar (or help > troubleshooting information...)
  2. Click Open containing folder
  3. Use file > exit or "Firefox" button > Exit to exit Firefox (not the ' X' top-right that just closed the window)
  4. in your profile f older localstore.rdf select and copy ('Ctrl + C') then in short tights to make a copy, repeat the steps to create at least a copy, the original and the "localstore - Copy.rdf" and the "localstore - copy (2) RDF" will all be the same, about 4 KB to begin with. (not 18KO not 76 KB)
  5. Replace Firefox.

  Freshly generated means rename or delete the localstore.rdf original while Firefox is down, restart Firefox and customize your toolbars as you want.

  If you have a problem with a corrupt localstore.rdf put Firefox down and in your profile directory, delete or rename the localstore.rd then rename a copy of localstore.rdf

  Reference: http://kb.mozillazine.org/Corrupt_localstore.rdf see references to the backup copy, you must, of course, take periodic backups of all your personal data, and for Firefox, which includes your profile.

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• Is it possible to save data to dvd of windows XP?

  My grandson has a computer running XP. It has a dvd player. Is it possible to save data to dvd of Windows XP?

  If it is a DVD burner.

  Check the drive that is installed (there may be a logo on the disc whether it is writable or not.

  Tutorial: Burning CDs in Windows XP
  http://aumha.org/win5/a/XPCD.php

• Is it possible to save views with search criteria in Windows Media Player?

  I have a number of research that I commonly perform in Windows Media Player. Is there a way to save these as a United library view?

  Example: In the library - notice of songs, I applied the search criteria sub-genre: "Ken Burns Jazz" (I used the subgenre field to store the names of the series like that). The results show all my Ken Burns Jazz CDs. Is there a way to save this search so I don't have to re - enter criteria whenever I want to see my collection of Ken Burns Jazz?

  (The above is actually a relatively easy search. "" A more complex example would be something like this: kind: "classic" NOT like: 'Classical Kids' NOT like: '' Classical Crossover '' is NOT kind: "" classical music: Soundtrack "." It's the kind of search really, I don't want to have to re - enter every time I want to use.)

  Hi WilliamWood,

  There is no option to save the search in Windows Media Player. However, you can try to create playlist that would serve your purpose.

  Search for the song of your choice and add this song to the playlist. Here is a link that might help you create or add songs to the playlist: create or change a regular playlist in Windows Media Player: http://windows.microsoft.com/en-us/windows7/Create-or-change-a-regular-playlist-in-Windows-Media-Player

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• is it possible to save foglight in vmware vcenter? -foglight company

  Is it possible to save foglight in vcenter?  It's pretty simple in standard foglight.  Simply check a box.  I can't find any similar arrangement in the foglight company.  Links to the User Guide errror all out as well.

  Hi, I believe you are talking about having the dashboard WVE incorporated as a tab in vSphere client.

  It was a great feature in SWF, but it has not been added to the SOUL. I will discuss with the team of the SOUL, because it might be a good addition.
  For now, you can use: vSphere Plugin Wizard to manually create the plug-in.

  Regarding links to documentation, I'm sorry to hear that they are broken, please contact Support so that they can look into it.

  For now, here is the link to the online documentation:

• Is it possible to save the installation &amp; pre scan?

  Hello

  I am new to Thinapp & need to know that, is it possible to save save pre scan & installation post scan & build in a day later?

  Thank you!

  Hello

  You can probably create a virtual machine after a pre scan and installation, snapshot if you use Workstation or ESX (do not close the window of process configuration Capture ThinApp). And then you can go back to the snapshot and you'll get the Setup Capture window open to job analysis and build.

  Thank you

  -Pankaj

• possible to save the 2 Iphones on one computer

  is it possible to save 2, I phones on the same computer? have 2 old desktop Mac and a laptop to update who will accept only the I phone for back-up... Jim

  Yes you can.

  Make sure that each iPhone has a unique name.

  Settings > general > topic > name > here