There is no title for this

Similar Questions

• The mouse does not says "there is no driver for this mouse.

  Original title: Retractable Belkin Mini travel mouse

  All of a sudden my mouse has stop working.  It is said that there is no driver for this mouse.  I used it for about a year.  There isn't any software mouse in particular.  I don't know what could have changed.

  Hi Wandajenkins,

  1 did you do changes on the computer before the show?

  2. what operating system is installed on the computer?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit and see if that does the trick.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: As it was working fine until you can complete the restore of the system and check if the device works very well.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

   

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  You can also contact Belkin Support for assistance on the issue:

  Contact Belkin

  http://www.Belkin.com/au/contactus/index.asp

  Let us know if that helps.

• Hi, my places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this. Visited links are is more changing color.

  Hello
  My places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this.
  Suddenly the visited links don't change is no longer the font color, that I prepare for an exam, I need visited issues to change color, to follow up on issues that I ended. But if I delete a few days of history, then again once, most visited links change color and then it stops, it seems that something is getting full and not able to accommodate more? Why my visited links don't change color after a number of visits? I would like to make a back up of the file places.sqlite. So I tried everything to remove the profile, uninstalling reinstalling, creating a new profile, and then copy paste places.sqlite etc, but as mentioned after a few visits, visited links is no longer change color, if I delete a few days in history and then a few visits is again change color and then stop again, so what should I increase so that my quota of visited links is increased , I also tried tweaking about: config and there has been no result. Although I was not really convinced that _pages growing brower.history_max (don't remember the name, but I'm sure you get the idea) will help.
  Seems that while my visited links change color, quota is met and only if I delete the history of a few days will I get some links most visited to change color. Can someone enlighten us? As mentioned that my places.sqlite file size is 30 720 KB so I think maybe this has something to do with it? Would be very grateful if someone could help me. Thank you.

  Sorry it is not looking good.

  1. Unlike bookmarks history is not saved in Firefox.
  2. There is a possibility using Windows.
  3. Sync is not expected to back up things until the synchronization server
  4. If places.sqlite does not sort itself you may have to re-create remove it. You will lose your history, but can still access indirectly IF you have saved a copy of the appropriate
  5. Different databases to try to create new profiles
  1. History
     is rather less robust than bookmarks, you should deliberately somehow return it upward, but it's too late now
  2. Earlier versions of Windows
     This is really the last chance. Make sure you have some places.sqlite you saved. Always before and after any attempt to restore the backup. Windows must be able to provide a previous version. One of these versions may be usable as is; or can be used after a repair with housekeeping. Of course, this is not the latest version but it should help.
  3. Sync is not a server backup service.
     Sync is intended to save on another device, no backup is the fact that the second device then contains synchronized information. IIRC Sync development ceased, and the replacement when available may include a server backup option.
  4. Recreate the database of bookmarks (including history)
     Unfortunately, recess can only use saved bookmarks, there is no saved history to use. Once the database is re-created, it will continue to store the history but it loses the existing history. This time take steps to save on a regular basis.
     • The backup profile or at least the places.sqlite in this
       Backup and restore Firefox profiles information
       https://addons.Mozilla.org/en-us/Firefox/addon/FEBE/
     • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox#Rebuild_Places_database
  5. Use the new profiles for database testing.
  
  To simplify comparison of the results of the database different files create one or more new additional profiles. Then try to smash the places.sqlite file into the test profile with any other places.sqlite, you want to try. Allows you to directly compare the databases, without seeking to use sync and without changing the Firefox profile work unnecessarily. You can keep a reference profile of studies with the best of the profiles of any shows results of history; According to the best recreated or corrupted database is.
  • Use the Profile Manager to create and delete profiles Firefox
  • CARE, do not rename or delete profiles created once or use anything other than empty folders when they are created. Don't nest in the other profiles. (At least until you know exactly how it behaves - post back if you never consider such actions)

• The use of a third party bought the CD/DVD software (i.e. TurboTax bought on eBay) can cause damage to my MacBook Pro?  If so, is there anyway to check for this?

  The use of third party software bought DVD (i.e. TurboTax bought on eBay) can cause damage to my MacBook Pro?  If so, is there anyway to check for this?

  As it is a pressed original, CD/DVD printing, and not a house in CD - R or DVD-R commercial, there should be essentially no possibility of its containing malware.

• Why can I no longer right click to get the NewFolder option? I realize now, there is a button for this, but it does not work.

  Why can I no longer right click to get the NewFolder option? I realize now, there is a button for this, but it does not work.

  Hello

  I understand that you are facing problems with the creation of a "New folder" option in the context menu.

  Have you made changes on the computer before this problem?

  I suggest to follow the methods provided below and we update on the State of the question.

  Method 1: I suggest you to follow the steps suggested by "Linda Yan" and check if it helps.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/9ee6ecdf-5958-4AF4-B640-c659ada57bc4/

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Method 2: If the problem persists, I suggest you follow the steps proposed by "Linda Yan" and check if it helps.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/
  Hope this information is useful.

• I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  Did you check help-> updates to see if they are available? You probably don't have the latest version of Camera Raw that was compatible with Photoshop elements 12 installed.

• How can I configure my classic workspace, there is no option for this in the menu dropdown.

  I am trying to affect my page of the classic workspace layout, but there is no option for this in the drop down list at the top. I am trying to create an ap div, but it seems that the only way to access the ap div drawing tool is by accessing it through the insert/common/ap div. BUT I CANT GET TO IT!

  The APDiv option is not part of the program since the past 4 or 5 versions.

  To add position: absolute to an item, you must use CSS designer, or manually add the code in your CSS file or

• There is no function for this responsibility-R12

  Hello
  
  I hv created a user...
  I assigned the following resposnsibilty-
  
  
  • System administrator
  • System administration
  • Application developer
  • Functional administrator
  • Functional developer
  • User management
  • Great book Super user
  
  
  I disconnected & logged in as new user...
  
  then click User Management - it throws no function is available for this responsibility
  
  rest works fine.
  
  work nearby:
  
  clear the cache...
  
  still the unsolved problem
  
  
  Thank you

  Hello.

  User management roles must be added. Procedure is little different to add.

  Check Metalink note below: -.

  UMX error: "There is no function for this responsibility" or "There is no valid navigations to this responsibility" When Accessing 'Users management' responsibility. [734280.1 ID]

  Thank you
  JD

• Is there a better system for this?

  Hi, I have a cheat code system for my game and now this is the code:

  on (press) {
       var thingy:Boolean = false;
  }
  on (release) {
       if (_root.mf.codes == twoly) {
            _root.twolock = false;
            this.thingy = true;
       } else {
            if (_root.mf.codes == twreee) {
                 _root.twolock = false;
                 _root.threelock = false;
                 this.thingy = true;
            } else {
                 if (_root.mf.codes == fourt) {
                      _root.twolock = false;
                      _root.threelock = false;
                      _root.fourlock = false;
                      this.thingy = true;
                 } else {
                      if (_root.mf.codes == five5) {
                           _root.twolock = false;
                           _root.threelock = false;
                           _root.fourlock = false;
                           _root.fivelock = false;
                           this.thingy = true;
                      } else {
                           if (_root.mf.codes == toosixy) {
                                _root.twolock = false;
                                _root.threelock = false;
                                _root.fourlock = false;
                                _root.fivelock = false;
                                _root.sixlock = false;
                                this.thingy = true;
                           } else {
                                if (_root.mf.codes == sevenyearsyoung) {
                                     _root.twolock = false;
                                     _root.threelock = false;
                                     _root.fourlock = false;
                                     _root.fivelock = false;
                                     _root.sixlock = false;
                                     _root.sevenlock = false;
                                     this.thingy = true;
                                } else {
                                     if (_root.mf.codes == eight1) {
                                          _root.twolock = false;
                                          _root.threelock = false;
                                          _root.fourlock = false;
                                          _root.fivelock = false;
                                          _root.sixlock = false;
                                          _root.sevenlock = false;
                                          _root.eightlock = false;
                                          this.thingy = true;
                                     } else {
                                          if (_root.mf.codes == ninet) {
                                               _root.twolock = false;
                                               _root.threelock = false;
                                               _root.fourlock = false;
                                               _root.fivelock = false;
                                               _root.sixlock = false;
                                               _root.sevenlock = false;
                                               _root.eightlock = false;
                                               _root.ninelock = false;
                                               this.thingy = true;
                                          } else {
                                               if (_root.mf.codes == tendyone) {
                                                    _root.twolock = false;
                                                    _root.threelock = false;
                                                    _root.fourlock = false;
                                                    _root.fivelock = false;
                                                    _root.sixlock = false;
                                                    _root.sevenlock = false;
                                                    _root.eightlock = false;
                                                    _root.ninelock = false;
                                                    _root.tenlock = false;
                                                    this.thingy = true;
                                               } else {
                                                    if (_root.mf.codes == unlockable) {
                                                         _root.twolock = false;
                                                         _root.threelock = false;
                                                         _root.fourlock = false;
                                                         _root.fivelock = false;
                                                         _root.sixlock = false;
                                                         _root.sevenlock = false;
                                                         _root.eightlock = false;
                                                         _root.ninelock = false;
                                                         _root.tenlock = false;
                                                         _root.Locked = false;
                                                         this.thingy = true;
                                                    } else {
                                                         this.thingy = false;
                                                    }
                                               }
                                          }
                                     }
                                }
                           }
                      }
                 }
            }
       }
       if (this.thingy == true) {
            _root.txtx = "It worked";
       }
       if (this.thingy == false) {
            _root.txtx = "Wrong code";
       }
  }
  

  I wonder if there is a way to make it more condense or not.

  II think this should do the trick.

  var codes = [twoly, twreee, fourt, five5, toosixy, sevenyearsyoung, eight1, nine1, tendyone, unlockable];
  var lock = ['twolock', 'threelock', 'fourlock', 'fivelock', 'sixlock', 'sevenlock', 'eightlock', 'ninelock', 'tenlock', 'Locked'];
  var thingy = false;
  for(var i=0;i<=9;i++){
   if(_root.mf.codes == codes[i]){
    for(var j=0;j<=i;j++){
     _root[lock[j]] = false;
    }
    this.thingy = true;
    break;
   }
  }
  _root.txtx = this.thingy ? "It worked" : "Wrong code";
  

  In the future, I want to stay away from these variable names. For this kind of thing, I think it would be easier to manage a table 'lock', using lock [0] lock [9] instead of twolock by locked and even a table for codes I did.

  Instead of asking someone compress your code, it would be more useful to describe what the code does. What I'm guessing that the purpose of this code is, is to check a code and then unlock all levels earlier, followed by a confirmation that he was indeed a code valid.

• I can't use gestures on Firefox, but I can On Explorer is there an add on for this

  I have a Dell Inspiron One 2305 as computer has a touch screen that you can use gestures to Zoom In and Out with two fingers or pinch the Surface of the screen (as an I Phone)... He works on the Explorer browser, but not on Firefox... Y has an Add On for this problem I do not know if it would work on 3.6 since I was 4 now... I prefer not to use the two BrowsersOne for some another for other stuff

  Some actions have been removed in Firefox 4.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  browser.gesture.pinch.in -> cmd_fullZoomReduce
  browser.gesture.pinch.in.shift -> cmd_fullZoomReset
  browser.gesture.pinch.out -> cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift -> cmd_fullZoomReset
  browser.gesture.pinch.latched -> false
  

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• Error message on C4580: line: 2107; Char: 1 error: there is no connection for this connection ID.

  Code: 0

  URL: res://leframe.dll/preview.js

  It appears more and more often, often on sent by e-mail or web docs. If I answer "Do you want to continue running scripts on this page?" with o or N, nothing happens. I tried to do screen grabs & print photos that result, but still get the same error msg.

  The problem is caused when Windows creates the profile of the printer in the control panel that is not properly it create with drivers.

  We will not completely uninstall all HP software, instead we will remove the corrupted Windows printer profile and reinstall.  Total time for this on an average computer is about 5-10 minutes to repair completely (including rebooting).

  1) navigate Menu start > devices and printers or Start Menu > Control Panel > printers

  (2) select every profile of the printer to the printer with a problem, and then select remove device/printer.

  (3) restart

  4) go to the Start Menu > all programs > HP > insert model # here > adding printer (or Assistant)

  (5) follow the installer prompts to reinstall the printer profile and it recreates the Windows printer.

  (6) test printing google.com (uses very little ink when the test page comes out).

  I would like to know if you have any questions or problems.

  Thank you

  Dan

• is there any equivalent code for this?

  Hi, I am doing a project on steganography, but I'm stuck on the bitmap byte array conversion.

  There is no problem for the code to run in the desktop. Is there an equivalent code for the following code in BlackBerry JDE (for OS 5)?

  Private byte [] imageToByte (BufferedImage img)
  {
  WritableRaster raster = img.getRaster ();
  DataBufferByte buffer = (DataBufferByte) raster.getDataBuffer ();
  Return buffer.getData ();
  }

  Review Bitmap getARGB (...) method.

  Here are some examples of documentation of Bitmap code form:

  Original image bitmap =...

  int [] argb = new int [original.getWidth () * () original.getHeight];
  original.getARGB (argb, original.getWidth (), 0, 0, 0, original.getWidth (), original.getHeight ());

• The ZTE mf622 dongle works with Windows XP, and are there any software updates for this?

  Original title: I gave myself a dongle from ZTE MF622.

  The zte mf622 dongle works with windows xp, and are there updates software for it, as in this moment, it comes up saying dial * 99 #, when I try and connect to the internet?

  Hey dude,

  You should check the hardware manufacturer's Web site not in the Windows forums.

  All the best, take care!

• Flash website using the conversion (Greensock/Starling/Away3D libraries) to HTML5. Is there an efficient workflow for this kind of mass conversion?

  Hello!

  I read that demoralize him articles everywhere on the great navigators pushing Flash to the side and supporting the HTML5 for awhile now. I have a personal site that I keep and put a decent amount of work using the design. At the heart of the site is driven by external classfiles AS3 using Greensock libraries. Also, I went 3D with 2D content content using the Framework Starling and Away3D libraries. I am researching the possibilities of creating the same types of drawings in HTML5, if possible. Greensock already fully supports HTML5 with its new libraries GSAP. Starling and Away3D I'm not so sure...

  I would love to continue to grow in the same method, using FlashCC, but this is already limited to only desktop browsers. That's fine with me, if it remains bearable on workstations, but at this point I don't really know how well supported Flash will remain same in desktop browsers. I must admit that my real job keeps me pretty busy that my search time is quite limited, so I might be way off the coast.

  Is there any known and efficient workflow for the transition from a site that only uses external AS3 classFiles and 2D or 3D to the HTML5 canvas content? Is this even worth it if I'm comfortable with only to have the support of desktop browser? It seems to me that, at least in the office environment, Flash will retain a strong foot.

  I use the package full creative suite + FlashDevelop as my toolkit and have been reading upward on the discussion of FlashCC targeting HTML5 canvas. It's really interesting to me, but at the same time it seems to work with SWF movies which contain all their ActionScript. It is not the structure that I followed at all, and it wouldn't really work-able at the port just the classFiles external back into SWF movies since not all the .as files has a SWF that is directly related. In other words, I wonder if it is still possible for me to consider a transitional workflow to HTML5 canvas? It seems at some point I might have to bite the bullet and refactor everything from the beginning, which I must admit is not an appetizing idea.

  I just want to start a discussion with Adobe and other creators out there using entirely external .as files and juggle several libraries in their Flash projects for the future. I want to see what workflows are out there to conquer this kind of problem and if supported in the desktop browser environment is even really a problem.

  -Cheers and sorry for the wall of text

  I think you should read more and worry less. Microsoft include Flash Player in IE and Edge. Google include Flash player in Chrome. Firefox Announces recently committed to the development of a Flash plugin, even if they cease to support other plugins. I don't think that Apple will stop supporting plugins at all.

  Thus, all current users of your will see your site for at least the next few years.

• is there a simple solution for this error of nightmare?

  How to undo a mistake like that?  Often, I do some changes to develop and begin an export and uh oh, suddenly I find EVERYTHING in the folder has been selected.  You hardly notice that everything has been selected, there in the film of some other session, or accidentally.  Now the whole folder of images is being altered.  Then you export and suddenly 150 images begin to export.  You stop and now 'Cancel' or the back story does not for all at once more because you broke the flow.  Now how to undo these changes to the entire folder?  I don't want not 'reset', because several positions had already been optimized.

  I hope that there is a feature to subscribe on this thing; can't see there; It is fundamental

  I guess from your comments earlier that you don't want not all images to have the same settings. If this is the case, and in view of the where you are now, you will have to go back through the history for each individual shot. You will also enjoy why Auto Sync is not the default value and probably never will be. Even then selecting several images in module development must be done with caution because, as you have discovered, Lr will export all selected images.