ThinkPad Edge 14 Bluescreen - cannot find the cause
Hello
I have my new Thinkpad Edge 14 about 2 weeks ago! It worked very well for a few days and then all of a sudden blue screen appeared and he did it again! I'm not sure that it is connected or not, but the day before I upgraded to Windows 7 with the latest patches and updates!
After the first blue screen, it began to restart or show the blue screen every few minutes. I also got bluescreen in safe mode.
I tried to restore to before the update of the points but it did not help at all. Then I tried to use the restore to factory setting by pressing F11 and he tried to reinstall windows, but windows didn't even for the first time and it freezes! No I can not even access windows or use restore factory. I called the customer service and the guy told me to run software from Lenovo's diagnosis I did but he could not find any error with disk hard Ram ro!
I really don't know what to do next...
Awesome!
Try to stay away from the unit updated driver provided by Windows, install only the updates of security. Looks like it was a MS update device driver that caused it.
Tags: ThinkPad Notebooks
Similar Questions
-
mcastmib32.dll on startup and cannot find the cause!
My HP Windows XP based computer is coming up with the error message "the application or DLL is not a valid windows image. Please check this against your installation diskette. »
It started all of a sudden and I have run several antivirus programs, but cannot get rid of it at startup!
Googling this file name, it appears that it is a kind of malware, so depending on what "several antivirus programs", you have run, I'm sure you do:
Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/These comprehensive analyses can take some time, but you really need to run. SAS will probably be just a bunch of Internet tracking cookies, but you can remove them. Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.
They can be uninstalled later if you wish.
The scans by operating clean, if you still have the problem, we can solve it.In 1985, there were 11 known computer viruses. Today, there is more to 1, 122, 311 and the new threats are detected every day. Always update your virus definitions before running a scan.
-
What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000
Hello
1. Since when are you facing this problem?
2. What is the number of brand and model of the computer?
3. have you made changes on the computer recently?
BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspxHope the information is useful.
-
Satellite T110-11U - cannot find the router WLAN
Hello
I have a Toshiba Satellite T110-11U. Have had since February and loved it-fortunately it wireless used throughout the House. Then one day on a month, unless I was in the same room that the wireless router, Wireless does not work. I have 2 other laptops (and iPhone) which still connect wirelessly throughout the House and the garden without problem.
As you can imagine, it was very strange. When I take in the garden, my other laptops are all networks wireless in the region, but my Toshiba can't find any.Suspecting it was a driver problem, I made sure that the wireless drivers are up-to-date. With no joy, I got the system as it was at the time of purchase (do a complete restoration by interupting, starting and leaving the hard drive to be deleted and reinstalled etc.). Still the same problem. I even changed the rooms in which the router is, and the same problem - the Toshiba cannot find the router unless the router is located a few meters from the laptop.
Until I lose the will to live, can anyone suggest the cause of my problems, or is it time I admitted defeat and brought back to the Comet under warranty (where likely test next to a wireless router and tell me everything is fine!).
Thank you very much
Steve.
Hey Buddy,
Did you check if the wireless network card is recognized correctly in the Device Manager? There may be a yellow exclamation or unknown device. Try also updating the driver WLAN from Toshiba Web site:
http://APS2.toshiba-tro.de/WLAN/See all other WLAN routers?
The wireless network card can be activated using a combination of keys FN + F8 and in the BIOS. In the BIOS, you should also load default settings and test again. -
For sum reason my computer just started to do the following when I try and delete a file or move a file from one place to the other.
I am the administrator and the file is there.
Failed to remove "" cannot find the specified file. Be sure to only specify the path name and filre coeerct.
Help!
Perry
Hi KAD Rebar,.
- Did you the latest changes on the computer?
- When was the last time it was working fine?
- Are you having similar problem with all the files you are trying to move or remove it from the computer?
- You have security software installed on the computer?
Method 1
See the link below and run the Fixit tool available, check if it helps.
Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Method 2
If the previous step fails, then I suggest that you start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
My computer starts rather suddenly gel with many applications. Today it froze again once I finished a long email and was about to send. I lost him of course. My Event Viewer was the topic. Event 7000, Service Control manager Eventlog.
What can I do? I have Vista SP2 64-bit.
I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0
Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.
Thank you
Candy C:\Users\David> net helpmsg 2
The system cannot find the specified file.
Is that error on this post code, IE something deleted, probably your antivirus or you.
For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).
Explorer
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.
You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.
If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).
Close the browser and start a command prompt
- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
Then to restart the Explorer after trying all of the following
- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
If you cannot start the Explorer at all
- Press Ctrl + Alt + Delete and choose Task Manager
- Under the processes tab, click Show processes from all users to elevate to administrator
- In the Task Manager, click the file menu and then click new task (run) and type cmd
- Other things you can try typing
Explorer
Explorer c:\
Explorer/e, c:\
wercon
control
Iexplore
Rstrui
If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.
Reregister the shell registry entries
It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
regsvr32 /i shell32
regsvr32 /i urlmon.dll
regsvr32 RPCRT4.dll
regsvr32 PROPSYS.dll
regsvr32 MSCTF.dll
regsvr32 cscui.dll
regsvr32 rsaenh.dll
regsvr32 timedate.cpl
regsvr32 ATL DLL
regsvr32 OLEACC.dll
regsvr32 actxprxy.dll
regsvr32 USERENV.dll
regsvr32 msshsq.dll
regsvr32 NaturalLanguage6.dll
regsvr32 thumbcache.dll
regsvr32 WINTRUST.dll
regsvr32 MMDevAPI.DLL
regsvr32 audioses.dll
regsvr32 audioeng.dll
regsvr32 ExplorerFrame.dll
regsvr32 msi.dll
regsvr32 FirewallAPI.dll
regsvr32 netshell.dll
regsvr32 pnidui.dll
regsvr32 QUtil.dll
regsvr32 c:\windows\system32\wpdshserviceobj.dll
regsvr32 WINHTTP.dll
regsvr32 C:\windows\system32\qagent.dll
regsvr32 C:\windows\system32\portabledeviceapi.dll
regsvr32 wbemprox.dll
regsvr32 wbemsvc.dll
regsvr32 fastprox.dll
regsvr32 imapi2.dll
regsvr32 wshext.dll
regsvr32 gameux.dll
regsvr32 msxml6.dll
regsvr32 vbscript.dll
regsvr32 jscript.dll
regsvr32 wshext.dll
regsvr32 wshom.ocx
regsvr32 wshcon.dll
regsvr32 scrrun.dllDelete the folder and the settings of the Menu
This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f
Delete the thumbnail and icon Caches
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
attrib - r s h '% userprofile%\AppData\Local\*.db '.
attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
del "% userprofile%\AppData\Local\*.db".
del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
Disable thumbnails and previews
Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.
If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.
Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.
If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f
Turn around after testing the Explorer.
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f
A boot is a way to explore
It can be caused by a shell extension.
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
- Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
- Close Windows Explorer
- Start Autoruns by right-clicking and choose run as administrator
- Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
- Go to the Explorer tab and uncheck everything to the left.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete and choose Task Manager. Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
- Click the file menu and then click new task (run) and enter explorer
If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see problems explore
http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
Recycle BinIf the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).RD C:\$RECYCLE. BIN/s/qthen repeat for each drive to change the drive letter, for exampled:\$recycle Rd. BIN/s/qe:\$recycle Rd. BIN/s/qIf the Office does not startThis will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).MD "% userprofile%\DesktopTest".Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /fMD "% public%\desktopTest".Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t fTo restore default after having tested if begins to explore.Set ExpFix1 = % userSet ExpFix2 = % profilereg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fSet ExpFix1 = % PubSet ExpFix2 = % licreg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fYou will need to disconnect then.New entry missing folderIf the above does not help.Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg. -
After that update of Windows 7 with 5 ~ updates which mainly provided increased reliability, these KBs wound up loader of Windows BOOT OS/corrupt the rupture.
Root cause found:
----------------------
Boot Manager cannot find the OS loaderRepair action: repair of files
Result: failed. Error code = 0xa<---- next="" repair,="" this="" changes="" to="">---->
Time taken = 4206 msRepair action: repair store boot configuration data
Result: Has no = 0 error code x 490
Time taken = 221 msRepair action: System Restore
Result: Completed successfully. Error code = 0 x 0
Setting time = ms 44444How to search through my hard drive to find updates KB which is the origin of my computer to lose its bootloader/OS and not starting? What KB update is initially the charger operating system not found when everything worked very well, before these 5 updates.
What are the solutions?
Try the Forum updated; It includes questions of XP, Vista and Windows 7 update:
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Windows 7 backup error "the system cannot find the file specified. (0 x 80070002) »
* Note that I never could solve this problem. In the long run, I ended up reinstalling the operating system (for different reasons), but the issue remained pending. Thanks to those who have tried to help. (January 30, 2011)
Suddenly, I seem to have a problem with Windows 7 backup. I get the message "the system cannot find the specified file. (0 x 80070002) "at the point in the process when the backup is supposed to start. It has disabled my ability to make a backup, of course, except to the directly copy files to another hard drive. I was able to use the same USB drive in the past, so I don't know what happened.
I thought it might be a corrupt profile causing the problem, but I still get the same message on the new profile. I thought that maybe it's the reader, but I get the same message when you try to use the DVD burner.
I think my Windows software is up to date, and I looked in different places to find an answer without success. Any help you could give me would be appreciated. Thank you. I would be happy to provide you with any additional information you might need.
Hi Cuzzlor,
I finally solved the problem last week; I had the same error for 4 months.
Although the error message when opened on the Notepad kept identifying a PDF 'missing' that I had deleted my office long and the computer. I couldn't find the file back.
I noticed that the library tends to scan and Add locations; He had made a place out of the folder, because it was a file created with a scanner.
I've removed the 'empty' location, I don't know how I didn't notice, she draws from images and my backups are free from error.
I hope this helps.
-
"80070002" error the system cannot find the file specified with start.vbs
Original title: Windows Script Host
Script: C:\Program Files\PCDApp\start.vbs
Line: 2
Char: 1
Error: The system cannot find the specified file.
Code: 80070002
Source: (null)
1 first, update your AV program and run a full scan. Then download, install, update and run a full scan with malwarebytes(free). This will help you establish that his little likely to be malware related, or not.
If each scan find and remove whatever it is, does the problem persists after that scans have completed?
2 if so, try a clean boot. If the problem does not occur in 'clean boot' then follow the section "How to determine what is causing the problem by performing a clean boot" in an attempt to establish that generated the message.
Do not leave your PC like the clean boot and return to a normal startup after your investigations.
3. If the boot doesn't help, take a look at autoruns to see if that can locate which is turned on and generates the message.
-
I can't install most of the system disk c.It programs always show me "system cannot find the path specified." But, when I copy it to a disk D it starts installing. Most of the programs is not installed properly, because it seems that they cannot access some areas on the system drive. I tried already to check drive C for errors. It did not help. »
I solved my problem. It seems that Windows 7 creates additonal 100 MB partition with the system partition. When I reinstall Windows 7 I formatted the C drive but not the extra partition and perhaps this conflict has caused. I installed the system again but I have two of these drives formatted and it works normally again. Thanks anyway.
-
Windows Backup Failed: The system cannot find the specified file. 0 x 80070002
Hello
I had problems, make my weekly backups with Windows Backup and restore utility.
I tried three different times, and they have all failed with the error message:
"Failure of backup Windows: the system cannot find the file specified." 0 x 80070002.
I went through almost all of the threads in this forum about this, and none of them seem to work for me.
I went through the register of audit in this thread (http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx) and all records were correct and have no errors.
I also went through this thread: http://support.microsoft.com/kb/979281/en-us
I'm confused how to proceed with a resolution of 1 scenario; I finished scenario 2 of the resolution and the resolution of scenario 3 does not apply to my problem.
I was able to complete the portion of the data backup, just am not able to finish the part "create a System Image", i.e. when the error message appears. I check back up data with the options "Restore my files", and as far as I know, all the files are there.
So, what should I do then?
Suggestions or comments are much appreciated. Thank you.
Hi all
I'm sorry to post an update so late. I was waiting for my 1 TB External Drive happen so I can retry the backup.
I tried the solution in the link that User2@16 post:
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/thread/53b7a2c4-33c3-4c0f-a6fd-715abe36f1f9
And finish the backup without any error message more.
What I did is to assign a "drive letter" in the drive titled "RECOVERY", which has no drive letter in a first time.
Image of my system and backup were created successfully last night.
Thanks again for all your help. It is much appreciated.
-
I tried to back up my desktop using Windows 7 upwards, but he is not successful, he stopped, message error "the system cannot find the specific file" error code: 0 x 80070002. He said no specific file that causes the problem.
Also, my Seagate FreeAgent, I back upwards of C: from my old PC that runs under Windows XP, which causes conflicts of the OS? Enjoy diagnose and advise!
Hello
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
I suggest you follow the steps in the link below and check off the question:
0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7:
http://support.Microsoft.com/kb/979281
I hope that the information above helps you.
-
FRM-93535 the system cannot find the specified file
Hello world
Once we have installed WL 12 c, we try to launch text.fmx form to test the object, we have the following error:
FRM-93535 cannot create process.unable run time to run the start command.
in formsapp - diagnostic.log, we found the following entry:
[2016 01-24 T 14: 41:53.136 + 03:00] [WLS_FORMS] [ERROR] [FRM-93534] [oracle.forms.servlet] [tid: 104] [username: < anonymous >] [ecid: 53d1a119-bca3-4c2d-bbb0-74530762e90f-00000297,0] [APP: formsapp] [name of the partition: FIELD] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.14] [SRC_CLASS: oracle.forms.servlet.RunformProcess] [SRC_METHOD: startProcess] cannot run start frmweb webfile = HTTP-0, default command
[2016 01-24 T 14: 41:53.136 + 03:00] [WLS_FORMS] [ERROR] [FRM-93535] [oracle.forms.servlet] [tid: 104] [username: < anonymous >] [ecid: 53d1a119-bca3-4c2d-bbb0-74530762e90f-00000297,0] [APP: formsapp] [partition name: FIELD] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.14] [SRC_CLASS: oracle.forms.servlet.BaseServlet] [SRC_METHOD: logConnectionException] cannot create the enforcement process: cannot run the command to start []
java.io.IOException: cannot run program "frmweb" (in the "D:\Oracle_WL\Middleware\Oracle_Home\forms" directory): error = 2 CreateProcess, the system cannot find the file specified
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1048)
at java.lang.Runtime.exec(Runtime.java:620)
at java.lang.Runtime.exec(Runtime.java:450)
at oracle.forms.servlet.RunformProcess.startProcess (unknown Source)
to oracle.forms.servlet.RunformProcess. < init >(Unknown Source)
to oracle.forms.servlet.RunformSession. < init >(Unknown Source)
at oracle.forms.servlet.RunformSession.get (unknown Source)
to oracle.forms.servlet.ListenerServlet$ Request.getRunformSession (unknown Source)
to oracle.forms.servlet.ListenerServlet$ Request.getInfo (unknown Source)
to oracle.forms.servlet.ListenerServlet$ Request.doGet (unknown Source)
to oracle.forms.servlet.ListenerServlet$ Request.access$ 100 (unknown Source)
at oracle.forms.servlet.ListenerServlet.doGet (unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:687)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:286)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:260)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:137)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:350)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:141)
at java.security.AccessController.doPrivileged (Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:649)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:124)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:232)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:94)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:224)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3654)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3620)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:326)
at weblogic.security.service.SecurityManager.runAsForUserCode(SecurityManager.java:196)
at weblogic.servlet.provider.WlsSecurityProvider.runAsForUserCode(WlsSecurityProvider.java:203)
at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:71)
at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2423)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2280)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2258)
at weblogic.servlet.internal.ServletRequestImpl.runInternal(ServletRequestImpl.java:1626)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1586)
to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:270)
at weblogic.invocation.ComponentInvocationContextManager._runAs(ComponentInvocationContextManager.java:348)
at weblogic.invocation.ComponentInvocationContextManager.runAs(ComponentInvocationContextManager.java:333)
at weblogic.work.LivePartitionUtility.doRunWorkUnderContext(LivePartitionUtility.java:54)
at weblogic.work.PartitionUtility.runWorkUnderContext(PartitionUtility.java:41)
at weblogic.work.SelfTuningWorkManagerImpl.runWorkUnderContext(SelfTuningWorkManagerImpl.java:617)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:397)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:346)
Caused by: java.io.IOException: CreateProcess = 2 error, the system cannot find the file specified
at java.lang.ProcessImpl.create (Native Method)
to java.lang.ProcessImpl. < init > (ProcessImpl.java:386)
at java.lang.ProcessImpl.start(ProcessImpl.java:137)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1029)
... more than 48
]]
Please advice
I have reinstall for weblogic and form of the components, I followed the steps you provided for me and eventually I was able to run the application before I faced the following error:
]]
[2016 01-26 T 18: 17:08.504 + 03:00] [WLS_FORMS] [ERROR] [FRM-93534] [oracle.forms.servlet] [tid: 106] [username:] [ecid: 0020c1e1-eee1-4f1f-8dfb-978730ca312d-0000003c,0] [APP: formsapp] [name of the partition: DOMAIN] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.1] [SRC_CLASS: oracle.forms.servlet.RunformProcess] [SRC_METHOD: startProcess] cannot run frmweb webfile = HTTP-0, the default startup command
[2016 01-26 T 18: 17:08.504 + 03:00] [WLS_FORMS] [ERROR] [FRM-93535] [oracle.forms.servlet] [tid: 106] [username:] [ecid: 0020c1e1-eee1-4f1f-8dfb-978730ca312d-0000003c,0] [APP: formsapp] [name of the partition: DOMAIN] [tenant name: GLOBAL] [FORMS_SESSION_ID: WLS_FORMS.formsapp.1] [SRC_CLASS: oracle.forms.servlet.BaseServlet] [SRC_METHOD: logConnectionException] cannot create the enforcement process: cannot run the command to start []
java.io.IOException: cannot run program "frmweb" (in the "D:\Oracle_WL\Middleware\Oracle_Home\forms" directory): error = 14001 CreateProcess, the application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1048)According to Microsoft error setting:
Error message: "side-by-side configuration is incorrect."The machine is missing the correct C++ runtime components for your system type. (x 86 or x 64).
Installation of the next update solved the problem.
Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
I did the installation of the c library ++ and all ok thing.
-
Hi, I have a virtual machine with Windows server 2008 R2 x 64-bit, with SharePoint 2010 installed, it was working perfectly before and now I get this error when I take it back.
[msg.dictionary.load.openFailed] unable to open the file 'C:\Users\MyUserName\AppData\Roaming\VMware\config.ini': the system cannot find the specified file.
consult the file and I have not found this config.ini file, so I created an empty file with the same name, but still, I get the error
any suggestion
Thank you
Take a look at http://kb.vmware.com/kb/2032746 which describes this problem. You should also see what file is causing the problem when you check vmware.log virtual machine.
André
-
I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).
We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.
If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or
Maybe you are looking for
-
Failed to get Tab Mix Plus to work
Just started using Firefox Developer in the last 3 days and I can't for the life of me Tab Mix Plus to work properly. I used this add-on for years with mostly a success, a few hiccups here and there, nothing too embarrassing, luckily, but since the d
-
Netlix replaying is not in hd?
I did a search of the forum... and man, some of these threads are long as hell and I had no luck. someone had problems with hd netflix playback? I remembered being a feature standout our phone, and many in the wi fi (I have a 15mbps up and down of fi
-
My laptop is to expire too fast and goes into screensaver mode.
How can I change my screen saver time-control. Looks like a minute and then the screen goes black, then begin photos screen saver. It is very targeted and irritating. Usually, if I press a button on the keyboard it will come back, but not always. Ple
-
Memory error LaserJet Pro 200 power: 10.0001
I just got a laserjet pro 200 the other day and always impossible to print on due to the mistake of title. I pulled the orange tabs off all toners and reinstall them. I use the supplied toner when I bought the printer. Please help me!
-
Running IE8 on Vista Home Premium.I cannot create a backup to restore the system.
The error is 0x800423F3. A snapshot could not be created for the following reason, that the writer has encountered an error transitional 0x800423F3. The instructions you sent seem to be for Windows7. I was able to stop WMI (a warning appears saying t