ThinkPad X220t - how to increase FPS and game performance?

Similar Questions

• Upgrade Vista 32 and 64 for the recognition of additional memory and game performance

  I have a question for the computer.  I have a HP Pavilion Elite m9040n who has Windows Vista 32 - bit SP2 with 3 GB of memory.  From what I've been able to determine, the 32-bit version doesn't recognize up to 3.5 GB of memory and I need to install the 64 bit version of Windows Vista for additional memory can be installed AND recognized.  This system comes with the Core 2 Quad Q6600 (K) 2.4 GHz, at 1 066 MHz front side BUS and Socket 775.

  My question - would be upgrade to Windows Vista 64-bit and install another 4 GB for a total of 7 GB of extra memory for increased game performance.  Also, I have a graphics program which because of some image sizes (up to 96 inches - 19200 pixel everywhere) program that the bombs on me with "out of memory" messages.  I play World of Warcraft and Starcraft 2 right now.

  Thank you.

  Just another Hacker ol '

  In your case a newer graphics card improve performance much more compared to buying new RAM. You can then add more RAM. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to save pictures and games before drive hard formatting

  IM is preparing to install windows 7 on my windows xp prof.w/sp3 computer. How to back up my photos and my games before as I have format my hard drive? can I enter my hard disk and copy them from there? Sorry IM new to this anddont want to lose one of these elements.

  All documents can be registered on another HDD to keep.

  Games - do you mean games you have installed?
  All programs will need to be reinstalled once you have installed win7.

  If you mean places, you have to in games, all of them will save that info in a particular place, you will need to locate this file and save each of them for each game.

• How to increase SGA_MAX_SIZE and PGA_AGGREGATE_TARGET in 10g RAC

  All,
  
  We built the new RAC environment with the following configurations.
  
  Linux - RHEL5
  Oracle - 10.2.0.4.0
  2 node RAC environment.
  
  The database is now live.
  
  1. now, I need to increase the SGA_MAX_SIZE and PGA_AGGREGATE_TARGET in this RAC environment.
  Can anyone tell me the steps. Do I need to stop the database?
  Note: Always OEM is not setup for this one.
  
  2 performance testers are complaining about "high response time. No indication on this one?

  1. now, I need to increase the SGA_MAX_SIZE and PGA_AGGREGATE_TARGET in this RAC environment.
  Can anyone tell me the steps. Do I need to stop the database?

  You have to stop database... When you change the sga_max_size initialization parameter.
  But you need to check on kernel.shmmax (all nodes) before
  # sysctl - a | grep shmmax
  kernel.shmmax = xxxxx

  If you need more... and you have a lot of physical memory ;)
  You can modify /etc/sysctl.conf and then "sysctl Pei" kernel.shmmax as you said Mufalani.

  SQL > alter system set sga_max_size = new_size sid ='* ' scope = spfile;
  or
  SQL > alter system set sga_max_size = new_size sid = "DB1" scope = spfile;

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams192.htm#REFRN10198

  Furthermore, if you need new dimensions on LMS, you must change the parameter initialized so SGA_TARGET.
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams193.htm#REFRN10256

  You cannot change... no stop on PGA_AGGREGATE_TARGET,

  SQL > alter system set PGA_AGGREGATE_TARGET = new_size sid ='* ';
  or
  SQL > alter system set PGA_AGGREGATE_TARGET = new_size sid = "DB1".
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams157.htm#REFRN10165

  When you replace "sga_max_size"... spfile, you need to stop/start database, I think
  You should stop/start a front knot (don't make sure no error)... and stop/start another node on the other.

  Example: 2 nodes (racdb1, racdb2)
  Check shmmax 2 nodes
  # sysctl - a | grep shmmax
  kernel.shmmax = 8G

  SQL > create pfile = ' / tmp/pfile-backup ' of spfile;
  SQL > alter system set sga_max_size = 8 G sid ='* ' scope = spfile;

  $ srvctl stop d racdb-i o racdb1 immediate instance
  $ srvctl start instance racdb d-i racdb1

  If error... Check the log of alerts on racdb1 and solve (remember to also change "SGA_TARGET"), if no error stop/start on racdb2

  $ srvctl stop d racdb-i o racdb2 immediate instance
  $ srvctl start instance racdb d-i racdb2

  Date of arrival:
  Select * from v$ sgainfo;
  Select * from v$ sga;

  PGA_AGGREGATE_TARGET you can... (no power DB)
  SQL > alter system set PGA_AGGREGATE_TARGET = 2 G sid ='* ';

  2 performance testers are complaining about "high response time. No indication on this one?

  Use ADDM + AWR or Statspack...
  make the snapshot on each node of the CWA and reporting during the test.

  Also "High response times" are based on
  -Index
  -partition tables
  -High interconnect (NIC)
  -Disk RAID...
  -Variable SQL (if using the same on OLTP sql statement)
  and...

  Good luck

  Edited by: Surachart Opun (HunterX) on August 14, 2009 10:57

• How to increase the fps on an animation made in Premiere pro?

  I am trying to create a panoramic photo of a painting. I have my keys in place images, but it is very choppy. I want to increase my fps on the animation, but I don't know how. I searched for some time and I can not find the answer anywhere.

  I got the pace of the metadata tab.

  I understood why the animation done at 10 frames per second. It turns out that the first clip that you import into first will set the fps for your animations. I brought in a clip that took place at 10 frames per second that I was going to speed up. To remedy this, I brought in a clip that had 30 FPS and then added my other clips. Now, the animation runs as 30 frames per second.

  There must be a way to change the fps after that you already have in your clips but I don't know what it is. For now, I'll make sure to bring in a clip with the fps I want before I put it in my other clips. You can go back and remove the clip with the fps high and the fps, that the animations will run won't change.

• Re: Satellite L500-19Z - how to increase the performance of the game?

  Hey

  Basically, I have a Toshiba Satellite L500-19z, with chipsets Intel Series 4 express. I know this isn't a particularly good game, but surely the performance of game should be reasonable?

  I get 80% of the time lag - while on my old laptop (which costs no more than £200) I could play World of Warcraft on it no problem (I played the Sims3 on this laptop and had very few problems. I'm playing Dragon Age, but it is almost impossible.) My laptop is not more than 8 months old.

  I just want to know if there is a way to increase the performance of the game? I thought that maybe to connect my laptop to a PC Tower, but that could lead to the worst game performance, so I said.
  I'm sure I can't replace the graphics card, I've updated my drivers, defragment disks and so on.

  Any help is really appreciated, thanks in advance.

  Hello

  Is there anything to do to increase game performance. It depends on the graphics card and Intel cards are not designed for games, they are a good choice for mobile use because they don t need a lot of power.
  In addition, the peut t graphics card be exchanged, s thereby.

  It s always depending on the game that you can play. Therefore, check the system requirements of all the games you want to play and if your graphics card is supported. Not all games support all graphics cards.

  You must also use low graphics settings in each game. You can use the parameters of t.

  For example on my Satellite U400, possessing the same Intel graphics card, I can play Half Life 2 which has already 5 years but always low medium graphics settings.

• How to reset many Solitaire games played and won Matches of the counters?

  How to reset many Solitaire games played and won Matches of the counters?

  Hi Keith,

  Found an answer for Vista, that should work for you in Windows 7.

  To reset the game statistics, you must delete some files. These files will be re-created automatically the next time you play the game. The files are located in the following location: 'C:\Users\[UserName]\AppData\Local\Microsoft Games\ [game]", where [username] is the name of your account and [game] is the name of the game (in your case, Solitaire). Just delete the contents of the folder, but DO NOT delete the folder itself.

  http://www.Vistax64.com/gaming/139902-Solitaire-statistics-reset.html

• Cell free game. How can you choose the game # you want and that you do not have a random game pop up?

  On the free cell game.  How can you choose the game number you want and you have a random number of game pop up?

  I'm running XP Pro SP3 and in my FreeCell game I can on the game in the menu bar, and then click to Select the game that pops up a small window with a place to type a number. It also indicates the shortcut as the F3 key.

• How to cancel a "save game" that keeps returning to Freecell and Mah Jong Titans?

  My Freecell and mah jong games titans keep bringing the same games saved once - I can't move. Is it a virus or what?

  I had this problem also. I have Windows 7. I found a solution that worked for me.

  I went into 'Control panel' and chose 'features of the program. I selected "turn Windows features On and Off". I removed the check mark from FreeCell under games. I left the 'control panel '.

  I then did a search for files on my computer for the word "freecell". My goal was to find that everything about "FreeCell" and remove it from my computer. I found a folder in 'My music' which had a subfolder named \SavedGames\Microsoft Games\Freecell.  (I have no idea how it got there and I think you might find the folder anywhere, not necessarily in my music.) I deleted this file. I also removed the icon in my Dock of Windows FreeCell. I did a search on the word "freecell" again to make sure that nothing was left. Research found without any reference to 'freecell.

  I then back to 'control panel '; chose "features of the program." seclected "turn Windows features on and Off"; and well, put a check mark next to FreeCell under games.

  It worked for me.

• To uninstall a game I had on the trial basis free of charge but says "corrupted Installer? How can I uninstall this game I can not use and don't need?

  I need to uninstall a game whose free trial period has expired. Uninstall cannot complete and he asks: corrupted Installer? "How can I uninstall this game I can not use and don't need?

  Re-install and then uninstall it. If you can not re - install Revo Uninstaller Portableuse of reason.

• How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  Original title: SoundMAX Integrated Digital Audio

  How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  I need SoundMAX Integrated Digital Audio

  Hello

  Why you trying to update the audio, video and game controllers?

  The following steps may be helpful:

  1. open the Device Manager.

  2. Locate the audio, video and game controllers and expand it.

  3 click the sound card, and then click Update driver.

  For more information: http://support.microsoft.com/kb/283658

• My parents has been removed and the game of solitaire on their computers. How can I find and download one for them

  My parents has been removed and the game of solitaire on their computers.  How can I find and download one for them

  You still have the Windows CD?

  Follow these steps how add or remove games in Windows XP
  http://support.Microsoft.com/kb/307768

• Missing shortcut to windows and games accessories. How can I reinstall it?

  I accidentally deleted the shortcut to my windows and games accessories. How can I reinstall it?

  Hello

  · Where is that what you had saved the shortcut?

  You must re-create the shortcuts for games and other programs, you can check the link for the steps below: how to create a shortcut on the desktop: http://support.microsoft.com/kb/140443

• How to get back my old programs and games after the upgrade to Windows 7?

  I just upgraded from Windows XP 32-bit to 64-bit Windows 7 Home Premium and I followed the instructions on the Microsoft site. After installation, all my shortcuts were gone and the old programs and games, I had were put into a file called "windows.old". How can I get the programs and games in new windows? I don't want to download and reinstall EVERYTHING I had before.

  You need to reinstall... 32 to 64-bit is a change of platform and requires a clean installation. Data are stored in Windows.old

• Cannot read print because the contrast is to light. How to darken print and highlight boxes to increase the contrast?

  When I'm reading emails or check applications footprint is so slight, that I have a difficult given the impression. Any suggestions on how to increase the contrast would be appreciated.

  Hello Annette,.

  Some possible solutions for you. First of all, you have a laptop? Many of them automatically lower the brightness and contrast settings to save battery power. And it cannot be changed in the settings of the power Plan. So stop fist is here. Adjust the brightness and contrast settings until you can see comfortably. How is the impact on the battery? It is an interesting compromise?  Note: changes made to a diet plan will be lost when you connect to the wide, unless you save the changes as a custom power plan.

  Then go to Start Menu, and then select one of the programs (all must be changed in turn). For each program in the list, select properties and then select the Compatibility tab scroll down the list and tick executer run in compatibility and Mode in the drop-down list, select Windows 7. Then scroll down the list of options and select the last one, disable the display of high scale on the DPI screens. Click on apply and OK

  If these two mechanisms fail, go to control panel, select personalization and select one of the themes (all must be changed in turn). For each theme, select a basic and high contrast theme. You can still select / change the wallpaper, but borders, text, etc., are individually chosen by you.

  Try these approaches (ensuring that save you changes you want) and let me know how you fare. Please post back here with any specific questions or concerns about something. Its what we are here for.