This application has failed to start because it is side-by-side configuration is incorrect...

Similar Questions

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

  This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

  The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

  Hi Kathy,

  1 have you made changes to your computer recently?

  2. When you get this error message?

  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall and reinstall Windows Desktop Search

  The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2: I suggest do you an online scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• It's on my screen and I don't know how to fix it... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. » __

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  AegisE5.dll is linked to a network authentication system.  Because it is almost certainly only used with enterprise networks, you should communicate with your company, IT supports for assistance.

  If your computer does NOT connect to a corporate network:

  • What changes have been made recently to your network hardware/software?
  • You have a home network? Wired or wireless?
  • How is your computer connected to the Internet?

• Error "this application has failed to start because iertutil.dll was not found" on startup

  original title: iertutil.dll problem

  I have exactly the same problem as helpneeded1000. The message box that says: "this application has failed to start because iertutil.dll was not found. Re-install the program may fix this problem. "Get right after you start windows xp. It is constantly after I have trying to login or close. Shortcut buttons, start menu, everything on my desktop disappeared. I tried to open the box of the Task Manager by pressing Ctrl-alt-delete, but this is as far as going to my knowledge. Can someone help me solve the problem please? did askme to download any kind of things because I don't have any access at all.

  Thank you.

  Quimbee

  Hello quimbee,.

  In addition to the response of Naman R, please consult the link below if you are still having problems.  Please follow the steps to Joselbarra and let us know the status.

  When you start windows xp pro starts then stops and says this application has failed because iertutil.dll was not found

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/system-has-failed-because-iertutildll-was-not/6dd913ba-cc0f-4828-a55a-477771d25b66

  Thank you

• I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

  I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

  Hello
  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  Methods of resolution:
   
  I suggest you to download windows desktop search for additional and install.

   
  http://support.Microsoft.com/kb/940157

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

  I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

  Hi vlademer,

  D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• svhost error: this application has failed to start because xul.dll not found. Reinstalling the application may fix this problem

  I got a message when I reboot my pc
  «svhost error: this application has failed to start because xul.dll not found.» Reinstalling the application may fix this problem.
  I need someone to help solve this problem.

  Let's see...

  I downloaded this zip file to see what was in it.  The version of the file in this download link xul.dll is approximately 2 years and version 1.9.0.14

  The version of the xul.dll of Firefox on my system (trying to keep up-to-date and all) is aged two weeks and version 5.0.

  I think I want to reinstall Firefox, but this isn't the Firefox forum.

• Cannot run Real Player. "This application has failed to start because MSVCP90.dll not found. Reinstall the application may fix the problem.

  I'm unable to launch Real Player. I get a message saying that, ""this application has failed to start because MSVCP90.dll not found. " Reinstall the application may fix the problem. I did play several times in past three days, but to no avail. "I even installed the" install Microsoft Visual C++ Redistributable Package in 2010. as suggested by Joel S-Support Engineer at one of the similar Querys. I I am facing the same problem even after installing, so! The same dll missing or damaged.

  I even started recovery deleted files dll in the registry by using strange solutions on the Web "Recuva" but it is of no use.  I do not know! I even started thinking of reformatting the hard drive or changing into a new One.  It's very frustrating. Lately no Fortunately, I hit to the top of your site looking for answers! I'm still fumbling for answers!

  Kindly help me! I anticipate a quick recovery solution please!  Thanks Roy

  Hi Roykarnataka,
   
  MSVCP90.dll errors might indicate a problem of registry, a virus or malware problem, or even a hardware failure.
   
  Scan the checker (SFC) system files on your computer and check if it helps fix the problem.
   

  SFC analyzes and verifies the versions of all protected system files after you restart your computer.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  More information is available at: (sfc) System File Checker

• This application has failed to start because WS2_32.dll not found.

  Whenever I try to open any program I get this message: this application has failed to start because WS2_32.dll not found. How can I reinstall this Application? I have Windows Vista.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  If this happens in Microsoft Zoo Tycoon, then I suggest you to see the link below: http://support.microsoft.com/kb/323941

  Hope this information is useful.

• "This application has failed to start because iertutil.dll was not found.

  Whenever I try to open any application that is installed on my laptop, a message appears saying that "this application has failed to start because iertutil.dll was not found. He said little other than those.

  This started after I tried to solve another problem on my laptop. Last night, I installed updates, before turning off my computer. This morning, my computer freezes completely after I turned it on. Finally, he stopped long enough to get a screen with the message of freezing "configuration of updates: stage 3 0f 3-0% complete, etc.» I tried to work around this problem by using a solution when searching online, I found the problem. The solution had me select 'repair your computer' when the laptop has been turned on. He had me open a command prompt and rename a file called pending.xml. Thereafter, I could connect fine, but then the problem iertutil.ll is born.

  Almost everywhere I looked, I found only users of Windows XP with this problem and most of th proposed solutions require windows Explorer to work (which is between th many applications on my computer which is adamently refused to work). If you can help me, so I canassure you it will be greatly appreciated.

  Hello

  ·        What are the updates that you tried to install on the system?

  Let us know the number of KB updates. Follow the steps mentioned in the link given below to check updates are installed on the system.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Iertutil.dll errors are caused by situations that lead to the removal or corruption of the iertutil DLL file.

  Apart from this, follow the steps mentioned below.

   

  Method 1:

  I suggest make a SFC (System File Checker) scan on the system and check if the problem is resolved.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you do a clean boot and see if the problem still occurs in clean boot mode.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: when you have completed the installation, follow step 7 to start the computer in normal startup.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.