This program cannot display the Web page message stuck on the desktop

Similar Questions

• Satellite C660: message "this program cannot display this webpage".

  I need to use my phone to send what I have a problem with a laptop, I had barely a month ago
  Basically, when I start it up it automatically goes on a page and says "this program cannot display this webpage".

  It does not use Internet Explorer and it happens even when I'm not connected to the internet
  I can't get into the Task Manager or control panel is just a whole page with it.

  Hello

  Looks like you get a malware or a virus.
  Should start your anti-virus software and scan the system for some malicious software, etc.

• Computer stuck on error at startup "this program cannot display this webpage".

  Original title: Computor stick on error.

  When I start my windows xp, it goes through the normal process and goes straight to the "this program cannot display this webpage". Then, it freezes on it. How can I erase this.

  Hello

  I'll start by saying that, although I have met exactly the conditions you describe with the PC to one of my clients just yesterday, what may not be your problem.

  The problem was my client was caused by the weelsof.c Trojan horse.

  Attempts to start in SafeMode only a restart after a few seconds. Isn't the same case for you? Normal boot gave exactly the symptoms you describe.

  Somehow, I suggest that you look for the virus. I couldn't do it with the infected PC, so I had to remove the hard drive and a disinfection in another PC. I checked for the virus in turn with MSE, SAS and MBAM. The MSE analysis found and removed two files associated with the Trojan horse weelsof.c. The SAS and MBAM scans showed no malware. After re-installing the drive on the original PC it started as a customer would normally expect and another scan MSE (after leaving it connected to the internet for several hours) was also negative.

  If you cannot start in safe mode to scan malware for yourself, my methods may be practical for you, in which case a repair shop is your best bet, ideally one that you can get a recommendation for.

  Tricky

• BlackBerry smartphones cannot display a Web page that has https

  I can't see a Web page that using secure server you connect (HTTPS) as my web email etc... It gives the error:

  Error HTTP 401: unauthorized, you are not authorized to view this page. Please try to load another page [page gave me 2 Option: OK / retail]

  Help, please

  Hello!

  Sorry... we must have missed your original post... can happen... we volunteer our time here and can't always be caught.

  I think you can set the browser configuration settings from. With the browser running application, the BBKey, and select Options. Inside there are a number of different configuration items... a combination of those that should work for your situation. Sorry, I can't recommend the precise combination - everyone has a different situation. But if I had to guess, I would say that the site you're trying to go is not correctly coded for a mobile web browser. But, in the configuration screens you can, change the way your storm browser identifies Web sites - find this setting and change it to something else (perhaps IE or FF). So maybe the site will interact correctly with your BB.

  Good luck!

• This program cannot display this Web page, how can I stop this coming on screen

  How can I stop this happening

  Hello

  1. when exactly you receive the error?

  2. What is the full error message you get?

  3. have you made a recent software or hardware changes to the system?

  You can perform a clean start and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.

• After the upgrade to 38.01, cannot display some web pages.

  I am running Windows Vista. It started just occurring after the upgrade. Not all pages are scrolling. Help! I'm technically rudimentary.

  Thank you

  You get a pop-up dialog box or style style without a menu or the toolbar either? In this case:

  38 of Firefox has a little problem with this combination of circumstances:

  (1) viewing a page in a private window
  (2) tabbed browsing is powered down
  (3) you click on a link encoded with target = "_blank", which launches the link in a new window

  The new window opens without menus, toolbar, scroll bars, etc.

  Work on this bug is in progress, but I don't know if the fix will be available in the coming weeks. These are the known workarounds so you can continue using windows browsing private - one of them will work around the bug:

  (1) use tabbed browsing (there is a checkbox in Options > general > "Open new windows in a new tab instead");

  (2) shift + click the links to open in a new window with standard features. or

  (3) change a bunch of hidden settings as explained below - it will not you make changes to the way you use Firefox, but sometimes you need to enlarge some small pop-up windows that have been sized for a window with no toolbar displayed.

  # 3, here are the steps:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste feat and make a pause so that the list is filtered

  (C) for each preference that begins with dom.disable_window_open_feature. , if it is not 'true', double-click it to true.

  You may find that you prefer this anyway, given that sites can band is more these pop-up windows features.

  Who is relevant or do you have a different question?

• Cannot display the desktop

  Original title - missing Office

  I turned on my Lap - top Monday morning and everything was ok; later the same day, I went back to my computer and there was another office... where's my office?   I tried to recover all week.   Last night I went in the search and the typical office and in this research, I saw a list of everything on my desk so I know it is still there, but don't know how to get it back. What should I do?  Why does just arbitrarily go away? Please send message to thanks Sharonn Elliott

  Thank you... it worked. Yahoo.  I just a few icons that are gray, and look like they are of the Word Documents, but I can't open them... they say that they are corrupt.  So I guess I send people to the trash. There is also an office that is gray... trash that too?   Thank you very much for your help.  I couldn't afford to take my computer anywhere.  You are so awesome to help.  IS

• When my friend l. a automatic updates for Windows Vista, it can no longer browse the web, well connected (as evidenced by Skype and diagnostics) the message "internet explore cannot display the page" coming up. Is there a way to fix this?

  Explore cannot display the page
  Vista updates
  Restart

  Hello

  Welcome to Microsoft Windows Vista Forums.

  I suggest you follow these steps:

  Method 1: See if you can view another Web page

  To do this, follow these steps:

  Start Internet Explorer.

  In the top of the browser address bar, enter one of the following addresses:

  http://www.Microsoft.com

  http://www.MSN.com

  http://support.Microsoft.com

  If you do not receive a similar error message after entering one of these addresses in the address bar, contact the owner of the Web site where you see the problem. The website is maybe temporarily unavailable or other problems.
   
  If you receive the same error message, go to the next method.

  Method 2: Run the Network Diagnostics tool in Internet Explorer

  To do this, follow these steps:

  Start Internet Explorer, and then try to access the Web page that displays the error message.

  On the page that displays an Internet Explorer error message, click diagnose connection problems . The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  He was unable to find a problem.

  It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Note Users of Internet Explorer 6, click on detect network settings

  Click IP address , and note the IP address. You may have to it for future troubleshooting.

  Follow the steps in the Network Diagnostics tool to fix any connection problems.

  Start Internet Explorer.

  If you receive the same error message, go to the next method.

  Method 3: Use the delete browsing history

  If resetting the modem or the router has not resolved the problem, delete your browsing history might help. Follow these steps to delete your temporary Internet files, history and form data:

  Internet Explore 7

  Start Internet Explorer.

  On the Tools menu, click delete browsing history .

  Select the check box next to Temporary Internet files .

  Select the check box next to the history .

  Select the check box next to form data .

  Select the check box next to Cookies .

  At the bottom of the window, click delete .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  Internet Explorer 6

  Start Internet Explorer.

  On the Tools menu, click Internet Options .

  In the Temporary Internet files section, click delete files and then click to select the text box delete all offline content , and then click OK .

  In the history section, click clear history , and then click Yes .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  If you receive the same error message, go to the next method.

  Method 4: Use the Internet Explorer (No Add-ons) mode

  To do this, click Start , point to programs , point to Accessories , point to System Tools and then click Internet Explorer (No Add-ons) .

  Note The Internet Explorer (No Add-ons) mode is only available for Internet Explorer 7 and Internet Explorer 8.

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  Click Tools and then click Internet Options .

  Click on the programs tab, and then click Manage Add-ons .

  Click an add-on in the name list, and then click disable .

  Repeat step 3 until you identify the add-on that is causing the problem.

  If the methods in the "Resolution" section General did not resolve your issue, you can try to use the methods in the "Advanced Troubleshooting" section If you are not comfortable with advanced troubleshooting, you can ask for help or contact support. For information about how to contact support, please visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?PRID=12357

  For more information follow the link below:

  http://support.Microsoft.com/kb/956196

  Hope this information is helpful

  Suresh G

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automatic updates program turned out impossible to turn it on, with error message "site has encountered a problem and cannot display the page you are trying to view.

  Original title: Auto updates

  My automatic updates program is disabled.  When I try to turn it on, I get this message "the site has encountered a problem and cannot display the page you are trying to view.  Automatic updates forever, why was off and why he now won't come back?

  Bill T

  E-mail address is removed from the privacy *.

  Hi Bill,

  This problem can be caused if the automatic updates service may be missing in the Services snap-in.

  1. is the Service Pack 3 installed on your computer?

  2. what anti-virus software you use in your computer?

  Follow the steps below:

  Method 1:

  To resolve this issue, follow these steps:

  1. Click Start, click run, type explore, and then click OK.
  2. Look for the following folder:

  %windir%\System32\inf

  Note The %windir%\System32 placeholder represents the path of the WINDOWS System folder. Typically, C:\WINDOWS is the path of the WINDOWS System folder.

  The inf folder is a hidden folder. To view the inf folder, follow these steps:

  a. on the Tools menu, click on Folder Optionsand then click the view tab.

  b. in the list of Advanced settings , click to display the hidden files and folders under hidden files and folders.

  c. click applyand then click OK.

  3. double-click on the inf folder, right-click in theand then click install.

  4. click on Browse. Look for, and then click the \ServicePackFiles\i386 %windir%\System32folder if the following conditions are met:

  • You install Windows XP SP3 from a CD Windows XP SP3 which included as part of the basic installation of SP3.
  • You have downloaded and installed Windows XP SP3 from the Microsoft Web site.
  • Windows XP SP3 was included with the computer.

  Note If the files from the Service Pack folder is not present on the computer, you can copy the files from a Windows XP SP3 slipstreamed installation CD.

  5. click OK to copy the files.

  6. change the setting on the computer to not display the hidden files and folders. To do this, follow these steps:

  1. On the Tools menu, click Folder Options, and then click the view tab.
  2. In the list of Advanced settings , click show not the hidden files and folders under hidden files and folders.
  3. Click applyand then click OK.

  7 restart the computer and check.

  Method 2:

  Follow the steps in the link below.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update:

  http://support.Microsoft.com/kb/883614

  For reference:

  How to configure and use automatic updates in Windows:

  http://support.Microsoft.com/kb/306525

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

  hyperlinks in emails in incredimail

  When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

  When I get an email through incredimail cannot connect hypertext links. It is up to this cannot display the web page

  You must contact the Support of Incredimail for that matter.

• Program cannot display web page on start up - replacements all & freeze safe mode

  Hi, on my pc startup (Vista) after the initial office, he's going on a blank white page with information i. Message is "the program cannot display Web page". If I try to start the task manager that flashes briefly upward, then the white screen resumes. If I try again, I get a black screen. While the screen is in place I can't do anything else or run programs at startup upward until this screen.

  If I boot in safe mode, the top of desktop and icons here, but I can't do anything else - even closed. I have to press the power button until the PC is emerging.

  I don't know how to do BACK guests or find how to work around this problem. I tried several searches but all the answers are in line to remove this or that or a scanner. I don't have access to all programs do. Even the answers on this site so far await you to be able to run other programs of some sort. I'll have to write this on PC of the wife. Any help / suggestions gratefully received.

  Thank you, Nick

  You can use Windows Defender in offline mode, use a PC secure and download and use:

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  And then use removable media or a CD/DVD and create the startup and startup disk in your infected PC and then run a full system scan. You have no need to start your system in this way.

• Error code: 0X80072EFF (cannot display the Web page)

  My pc is no longer updates windows, nor do an update error code manual 0x80072eff that my pc is proteceted by full protection of Virgin Media and analysis of viruses etc. See the there are no problem I get message internet Explorer cannot display this webpage.  When I try to update via the web site address microst update I get the following message:

  [Error number: 0x80072EFF]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  George,

  0x80072EFF = ERROR_INTERNET_CONNECTION_Reset

  Reading * carefully *-not just browse the page and start following the steps.

  You may encounter temporary connection Errors when you use Windows Update

  -or-

  Microsoft Update to install updates:

  http://support.Microsoft.com/kb/836941

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• "the site has encounter a problem and cannot display the page" Why am I seeing this whenever I try to access the center of update microsorf?

  "the site has encounter a problem and cannot display the page" Why am I seeing this whenever I try to access the center of update microsorf?

  Hello
   
  1 do you have service pack 3 installed on the computer?
   
  2. what was the recent change in hardware or software performed on the computer before the question?
   
  Please follow the links below to solve the problem.

  Method 1
   
  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  
  http://support.Microsoft.com/kb/883614
  
  Method 2

  Add the Windows Update Web sites to the trusted sites zone in Internet Explorer

  If you have verified that your firewall and antivirus are not causing the problem, try adding the following Web sites for the Microsoft Internet Explorer Trusted sites zone on the computer where you use Windows Update. After you have added the following Web sites to the Microsoft Internet Explorer trusted sites zone, run Windows Update. To run this method, follow these steps:

  a. start Internet Explorer.

  b. on the Tools menu, click Internet Options.

  c. click on the Security tab and then click on Trusted Sites.

  d. click Sites.

  e. Click to clear the requires a secure server (https :) for all sites in this zone check.)

  f. in box add this website to the zone, type each of the following Web site addresses and then click Add:

  o https://*.microsoft.com

  o https://download.windowsupdate.com

  o https://update.microsoft.com/windowsupdate

  o http://*.update.microsoft.com

  o https://*.update.microsoft.com

  o http://download.windowsupdate.com

  g. click closeand then click OK.

  h. visit the Windows Update Web site or the Microsoft Update Web site.

  I hope this helps.