Write ports PCI-6503

Similar Questions

• Pulse TTL-PCI-6503 write in a log .txt file

  Hello, I need to connect the PCI-6503 data output to a log .txt file. This PCI-6503 map reads a pulse sent from another PCI-6503 located in another computer. I want to just save the .txt file if a pulse is received. I know how to create and write to the .txt file, but do not know how to write the DAQmx data in this file. Could someone help?

  Thank you in advance!

  Hi a2h,.

  To only write when there is data emerging from the Daqmx read, you can use the table Emply?. VI to determine if there are real (like the pulse) from the unit and then data of yarn that a structure of case that will write to a text file in the case of false.

  Peter W.

• dc7800p Convertible Minitowers: win 10 PCI Serial Port & PCI device drivers unknown misiing

  Have missing drivers - managed to solve PCI Simple Communication Device driver missing by downloading some drivers of HP support and running these '(Admin) command prompt' with them running in Win 7 Compatibility Mode.  What (s) that I have to run to remedy or if not where should I look to fix.

  Hello:

  You need this driver for the Serial Port PCI...

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp46001-46500/sp46134.exe

  Please post the hardware ID of the PCI device unknown that you are missing the driver.

  To find the hardware ID, go to the Device Manager and click on the unknown device needing driver.

  Then click on the Details tab in the upper part of the device window.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 3rd point (Hardware ID).

  After the first string of characters you see in the window.

• HP DC7700: Serial Port PCI and simple Communication controllers pilots missing in HP DC7700 windows 7 (32 bit)

  PCI\VEN_8086 & DEV_2997 & SUBSYS_2801103C & REV_02
  PCI\VEN_8086 & DEV_2997 & SUBSYS_2801103C
  PCI\VEN_8086 & DEV_2997 & CC_070002
  PCI\VEN_8086 & DEV_2997 & CC_0700

  and

  PCI\VEN_8086 & DEV_2994 & SUBSYS_2801103C & REV_02
  PCI\VEN_8086 & DEV_2994 & SUBSYS_2801103C
  PCI\VEN_8086 & DEV_2994 & CC_078000
  PCI\VEN_8086 & DEV_2994 & CC_0780

  Experts in the House should please come to my rescue.

  I just upgraded my Hp DC7700. I was able to get all the drivers except for SERIAL PORT PCI and PCI SIMPLE COMMUNICATIONS CONTROLLER missing. above are the two missing pilots hardware ID

  Hello:

  There is no W7 drivers for these devices.  You must use the Vista drivers and if auto installation does not work, you will need to install the drivers manually by navigating to the folder of the driver that was created when you ran the file from the device in the Device Manager (browse my computer for driver software).

  This package contains the driver Intel Host Embedded Controller Interface (HECI) for access to Active Management Technology (AMT) initiative of the Intel Digital Office for rated desktop models and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp34501-35000/sp34743.exe

  This package contains the Intel (LMS) Local Management Service and Serial - over - LAN (SOL) support for the technology of Directors Active (AMT) under the Initiative of digital office Intel for the supported desktop models and
  operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp34501-35000/sp34744.exe

• DC-7800: serial port pci drivers

  When I checked my device manager I saw a yellow icon for what follows in the OTHER DEVICES PCI simple Communicatiosn controller... Serial port PCI... and my own USB 3.0 card Bluetooth device... I can't find drivers for the latter.

  I'm a bad day and just can't see the answer... Any help would be appreciated.

  Hello:

  You need these pilots for the port of simple Communications controller & PCI series PCI.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3459248 & swItemId = vc_78668_2 & swEnvOid = 4059

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3459248 & swItemId = vc_78665_2 & swEnvOid = 4059

  What model bluetooth adapter do you have?

  You will probably need to get the driver from the manufacturer's Web site.

• Can I use a USB-6501 instead of a PCI-6503 map?

  I currently use a card PCI - 6503 DIO into a Windows XP system. We have an old (7.1) version of LabVIEW. We are looking for a Virtual Machine in Windows 7, but he will not be able to communicate with the PCI Bus. We currently use a PCI-6503. A USB 6501 will work to place it?

  We are looking for some intot wiring problems, but I think it will do the job.

  Thank you.

• Serial port PCI and PCI Simple Communications Controller

  Hello!

  My computer OS is Windows 8.1.

  I just shearch something and I found that... I don't have serial Port PCI and PCI Simple Communications Controller. (Unintalled)

  Serial port PCI-> VEN_8086 & DEV_29B7 & SUBSYS_2819103C & REV_02\3 & 21436425 & 0 & 1 b

  Controller PCI Simple Communications-> VEN_8086 & DEV_29B4 & SUBSYS_2819103C & REV_02\3 & 21436425 & 0 & 18

  Sorry for my English. But can anyone help me?, where I can download these files.

  Hello:

  Here are links to the drivers you need...

  Install PCI Simple controller Comms

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78668_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Install PCI Serial Port:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• PCI-6503 and LabView 7 trouble in Win XP

  I'm unable to get a digital I/o card 24-line PCI-6503 correctly installed in my Win XP machine.  I use LV 7.1 and NI VISA 5.0.3.  I tried the two v 7.2 and 7.2 DAQ, which supports this card.  Is there something special about software versions and compatibility that I'm missing?  I see that I need to install NI VISA 5.0.3 before LV, but other than that, I did not understand a specific installation order.  Is there something that I am on?  Any suggestions on what I might try?

  Thank you.

  Hi Scott,.

  So, it seems that your card has been properly installed. Now, since your code does not seem to change the States of DIOs, we could try a few things.

  1. First, uninstall DAQmx so keep us just the NOR-DAQ traditional in the computer, since these screws DIO you mention on traditional DAQ.
  2. Try to change the State DIO in MAX using the Test panels. Check if they are actually switching.
  3. When you say that the problem lies in the screws, what exactly is the behavior that you are experiencing? Can join any error or the screenshot of the behavior code?

• HP dc 7800 how can I install the driver for serial port pci Windows 8.1

  HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help

  Hello:

  Download and install the W7 AMT driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Driver serial port PCI missing on elitebook 2560p after replacing the defective motherboard

  Hello

  I have the following problem, after a replacement of faulty motherboard on my elitebook 2560p with Win XP, I find a question mark in the Device Manager list under a PCI serial port driver is missing.

  Properties of the navigation device I can read:

  Serial port PCI - PCI bus 0, device 22, function 3

  and
  PCI\VEN_8086 & DEV_1C3D & SUBSYS_162B103C & REV_04\3 & B1BFB68 & 0 & B3

  I tried to locate the pilot unsuccessfully in SP38312, SP45131, SP53918, unzip the files and trying to manually locate the driver in the files with the windows driver update function.

  can help you locate the correct driver?

  Thank you very much in advance

  Hello:

  Try this one:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071201&prodNameId=5071203&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-91961-1

  Paul

• Read/write port DAQmx questions

  Environment

  Windows XP SP3

  LabView 7.1

  NOR-DAQmx 8.7.1

  (2) PCI-DIO-96 cards

  I'm trying to move from the level of registry TDAQ programming DAQmx and give me an "intensive" in mx.  I'm not sure about a few things.

  I need to put in place 20 channels/tasks that will run a mix of single, large port (8-bit) bed and written.  Some will be handshaking (82 c 55 mode 1) and some no handshake (82 c 55 mode 0).

  The plan is to create all tasks during an initialization routine and save the names of global tasks.  I open the task after creation and use the globals during the main part of the program execution, when I make the reads/writes on the port.  The body can run for hours at a time.  When the main is closed, the stop routiine close all tasks to exit ahead.

  Regarding the task creation/destruction - is it safe to create tasks and leave them open, or should they be created and destroyed every time that a write is performed?

  Regarding the port reads/writes, I suppose that when a port single read/write is made, there is no established buffer.  Is this correct?  Specifically, if I use the method above and leave task open, is it possible saturation of buffer or something similar to happen?

  TIA

  Charlie

  Regret - Yes, you said 7.1 - I can't keep back away, but here is a screenshot

  

  And - the task is saved outside of LabVIEW, so it's not really 'Open' or 'Closed', even when programmatically, create and destroy jobs.  Tasks exist or do not exist.  If they exist and have no errors, they can be run.

  Tampons are to move data to and from the device.  For static DIO, this isn't a problem.  You CAN run into problems with a task of acquiring buttons if it acquires data as soon as you read the data, but you can work around this by starting and stopping the task properly.

• Maximum latency to read/write for PCI-DIO-32HS with NOR-DAQmx?

  I was asked to evaluate using the PCI-DIO-32HS and NOR-DAQmx on MacOS X to essentially close a control loop.  My first concern is whether or not it can run fast enough.

  So my questions are: what is the maximum latency from the moment of receiving a signal strobe reading data from external hardware, then read a single 16-bit sample and sending it upward by NOR-DAQ to a user space application?  And, similarly, what is the maximum latency of sending a unique 16-bit value from a space application user down through NOR-DAQ, then write a port and affirming a strobe signal of external-data writing material?

  Thank you.

  Hi AliasMe,

  Thanks for posting and welcome to the Forums EITHER!

  Do you need to process the data in the software and generate a value on this basis?  DIO-32HS (alias PCI-6533) offers in the buffer of inputs and outputs, but you'd have a latency in your control system relying on the OS to do treatment.  Since this period is dependent on the system, I can't give a specification for the amount of time it would take.  However, integrating data in memory, processing and writing back to the card would likely be on the order of several milliseconds.

  Generally, we recommend FPGA in situations of control like this, so you can do all the processing in hardware.  However, if provide you more details on your request we can look into all the options available.

  -John

• is serial port pci and pci simple communications controllor used to and are they necessary as mine do not work

  they have a yellow sign next to them I don't have any idea what they are if anything

  signed

  would like to know!

  Hi William,.

  1. do you have a code error message when you click on the yellow Board?

  2. What is the brand and model of the computer/motherboard?

  3. which card has been inserted into the PCI slot?

  PCI stands for Peripheral Component Interconnect. It's an industry standard bus to connect devices to a computer.

  A serial port is a serial communication physical through transfers of information inside or outside a bit at a time. The term "serial port" usually identifies hardware more or less conforms to the RS-232 standard, designed to interface with a modem or a similar communication device. The serial port used to be widely used to connect to a variety of devices external and is essentially a two-way communication port. There are still devices using a serial port connection. These are often marked as RS232 and would include devices such as TELEVISION receiver cable boxes.

  The PCI of Simple Communications controller is a generic label given by Windows for PCI cards installed in a PC when the drivers for the device are not installed.

  You probably received this error because you have not installed the driver for your PCI device.

  If your computer came with a motherboard driver disc, put the CD in and install the chipset drivers from Device Manager browse the CD. This would update the drivers for those devices.

  Steps to follow:

  a. right click on the entry in the Device Manager and select Properties.

  b. in the driver tab updated some drivers.

  c. Select Browse my computer for driver software.

  d. click on browse and look for DVD player option.

  e. follow the instructions on the screen and restart the computer after installing the drivers.

  If you don't have the motherboard drivers CD then please download and install the chipset drivres for the manufacturer's website.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• HP Compaq 6000 Pro AT492AV: Serial Port PCI Driver help - HP 6000 AT492AV Windows XP Pro

  Due to former software compatibility issues, I run Win XP on my computer HP Compaq 6000 Pro AT492AV.  I installed a new copy of XP OEM and have solved all driver except for 2 problems:

  (1) PCI Serial Port, here's the info from Device Manager:

  PCI serial port

  PCI bus 0, device 3, function 3

  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C & REV_03
  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C
  PCI\VEN_8086 & DEV_2E17 & CC_070002
  PCI\VEN_8086 & DEV_2E17 & CC_0700

  (2) unknown Device, here's the info from Device Manager:

  Controller of Interface LPC Intel(r) ICH10D - 3A1A

  ACPI\IFX0102
  * IFX0102

  I'd appreciate any help you can provide!

  All the best

  Hello:

  You need these drivers for devices...

  1.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45367.exe

  2.

  This package provides the device driver for the Infineon Trusted Platform
  Module (TPM 1.2) in office supported running models taken Microsoft support
  Windows XP operating system.
  
  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40553.exe

• Serial port PCI and Communications Simple driver (s)

  I just reinstalled windows 7 Pro X 64 and I have all the drivers, but these two. Any ideas on what they are, and where I could get them?

  PCI serial port

  PCI Simple Simple Communications controller

  I have a HP Elitedesk 800 G1

  Hello:

  You need this driver...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5387468 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_131760_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken