Thresholding of image problem

Similar Questions

• Refusal of application because of brand image problem

  Hello

  my application was (after five weeks of testing!) refused because of brand image problem.

  They said that the name of the application share on Google + is bad but share using Google + is OK. What is the difference? And technically speaking suggested the name is wrong.

  Unfortunately it didn't say what (BlackBerry? branding guidelines (Google?) This violates and I got no idea.

  Dear BlackBerry:

   

  I would appreciate if (in this case), you can send the link and tell it that the paragraph of the guildelines brand that it violates.

   

  I'm getting very angry because the approval process is slow as sh | t and justification of the rejection of the app is low.

  I was a true fan of the new platform and had a lot of patience with you, but I seriously think to recover all the investment to BB10 and leave this platform forever. This isn't normal partnership. Android brings much more money and has no such stupid restrictions.

  Tom

  thubalek wrote:

  I'm certainly not pretending that this app is a Google official.

  I have icon is not intentiaonally looks like an official, app is published under my developer account name is Tomas Hubalek, not Google Inc. There are support by email (for me) and support of web page (currently running on my own domain name). I really don't think that a Word will change the perception of the app so much.

  Share with Google name + doesn't make much sense as is is not possible share USING Google + (there is no official API). You can only share link ON Google + (there are APIs to do this).

  Yes, I know that you are not trying to suggest that your application is official, but I guess you have to follow the rules on brands. Many users never look enamel name or support of the developer and they would just assume I think.

  Anyway, if they think that it is acceptable to "share using Google +", I would just go ahead with it if I were you. There is no practical difference between the two names, as far as I am concerned, and none of them more or less sense to me than the other. It is not worth to all.

  (I have a master's degree in theoretical linguistics, which specializes in the variation of the English language, and several years of doctoral study in the same area, so I'm pretty confident that my intuitions about the meanings of words in English are good).

• Threshold of image analysis does not work in program program freezes

  I am a new user of labview and I probably have an error in my code, but the only problem is that there is no error message that I receive from my code and it works up to a point at which the program crashes and I can't click on the buttons on the front panel. Basically everything works until when I want to choose the threshold of my image at this stage, it creates an image of the values in the threshold buttons, but I can't adjust the values more to find the best values.

  I have to say that I tried my threshold on its own code and it seems to work very well so I'm really confused as to what is get confused upward!

  Any help on what could be wrong would be useful. I added the VI and an image that I analyze.

  The process currently goes like this, you load the image, then choose a color (usually green) plan that gets extracted. Then you draw a line on the border of the object and it rotates the image to make it right, then you choose a return on investment and it cuts the main object. Finally at the point when you choose a threshold it crashes.

  Thanks for any help!

  Hello

  The root of your problem is how you used several structures of the event. As a general rule, a program must have just a structure of the event, which takes care of all the events during the program. The functions of vision were all working properly!

  Looking at what you're trying to do, I think it would be interesting to use a well-known architecture called the state machine with the events. I will attach a few framework code to show you what it would look like for you, you can adjust your program. I hope that its enough to get an idea of what I'm trying to show you, it doesn't have any code in there, but I think it's the idea overall, and if you combine it with the link below on the State machines, it can help you to define your code in a better architecture.

  Some links that you may find useful:

  Program of the event: http://www.ni.com/white-paper/3331/en

  Warnings about using events: http://zone.ni.com/reference/en-XX/help/371361J-01/lvhowto/caveatsrecmndtnsevnts/

  State machine: http://www.ni.com/white-paper/2926/en

  Let me know if you have any other questions.

• My iPhone has image problems.

  The button trim is there and it will allow me to crop, but as soon as I press "done" it is said that there is a problem.

  My iPhone doesn't let me send pictures via text or Facebook messenger unless it's a screen that has been making contortions 10 mintues.

  Photos take a few minu made full and not be blurred more ale.

  My iPhone is very recent, I have yet for 6 months and I already meet many of these problems, it is completely up to date so I don't understand why there are problems.

  Hey Broc_lee_Obama,

  Thanks for checking out the communities of Apple. They problems with your iPhone, we first want to make sure that all your data is safe and make a backup of all your data in iTunes or iCloud. How to back up your device using iCloud or iTunes

  Then you must erase your personal data and up to nine phone using iTunes. Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings

  Once the phone is set up as new, you will test to see if the images and the rendering issues are pass without your personal data on the device. If this isn't the case, we know, it was with some data on the device or in the version of iOS, which will be in you backups. You can make the data manually using iCloud or iTunes, but not restored from the backup that you will bring the problem immediately in.

  If the images and the rendering problems occur always personal information, you will need to have checked the telephone equipment. Find an Apple Retail Store or Apple authorized service provider using this link: Apple find places

  When you have found a location in your area, you can make an appointment for the Apple Store online, or if it's Apple authorized service provider, please call for an appointment.

  I hope this helps.

• Link to image problem

  Click on the button share and share buttons will show up but I can't click the button images of action as from facebook.
  the html tag is,
  < a href = 'facebook' >< /a >

  I have no problem in other browsers, firefox just.

  Help, please.

  Looks like a problem with the span with class = 'addthis_toolbox addthis_default_style' is not closed and the last two buttons because of this in Firefox. This SCOPE covers all the links, because it is positioned just before these buttons in Firefox.

  You can select the part of the page and use the selection View Source from the context menu.

  You can also use the DOM Inspector to see what Firefox does this code.

  • DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

• Z6100: Z6100 image problem

  Hello

  I understand that printing is not accurate especially when writing texts.

  I did a printed map and found the defective image

  

  I made the print head alignment

  and I found that all superior print head does not match the lower

  

  I don't know what to do to fix it

  Hello

  The diagnosis page is to give you an idea of where to look when you have problems of quality with the prints.

  If the prints are coming very well I will recommend you to leave it like that.

  Continue to make cleaning a work print head nozzles the focus and you will end up with a bad print head

• Image problems with the camera on the Satellite A200 - 14 d

  2 days ago, I bought my laptop and the image on cam doesn't seem right to me. It's a little blurry, as very many lines through it. It resembles nothing of the image from a camera with 1.3 Mp should look like. It's even better on my old cam... I tried changing the settings but nothing works.

  Anyone know what the problem with my camera? Please help me because I do not know what to do...

  Hello

  As you said, it is a 1 pixel cam. 3 MB and you should not expect too much of this cam.

  But you can change some settings to improve the quality of the image
  Check the options in the "Assistant camera".
  In the "Properties", you can define Image settings like sharpness, contrast, saturation, etc.
  The quality of the image also depends on the standard photo as jpeg folder, bmp and the size of the image.

• M712 repetitive image problem. Can not find the page for service with the official RULE

  I have to review the manuals online here and I googled for them as well.

  Nobody seems to have an official repetitive image for the M712 default rule page.

  My impressions can repeat the points that occur each 1.75 "or 44 mm.

  Looking at an older manual for a different model of printer, a HP 5100, this repetitive error indicates a Toner Cartridge primary charging roller.

  Since most of these parts are internal to the toner cartridge, I've already replaced a new cartridge of HP brand. No help.

  Most replaced suspect parts with a kit of maint merger, no help.

  I can assume either us:

  -a got a refurb had somehow HP ink cartridge or

  -a got another somehow cartidge PROBLEM or

  -the charge roller is NOT located within this model of printer toner cartridge and my roll charge elsewhere in the printer

  Someone at - it all pages of repetitive image rule for this prnter model?

  Thanks in advance.

  Test for half. Place a sheet of paper in the manual feeder on the right side and perform a self-test. When the rear edge of the paper into the printer, quickly open the toner door to stop printing. Remove the toner cartridge and look at the picture without fuse below. If the fault is present, it is still the toner and nothing else. If the defect is not present, then the question is fuser. Run a menu card and see if she has a routine cleanup of page and if it does not work there. If this is not the case, the fuser unit will probably be replaced.

• Imaging problem

  I have a Pavilion hpe-h8-1030.  My C drive becomes flaky I want either image or clone the drive to another.  However, when I run the software, (3) drives are RAID overall and are unselectable.  As all three Seagate drives, I used their software, being able to select a source drive but cannot select the destination drive.  It seems to me, to the eye without instruction, the problem may come from all drives (USB drives are very good and can be selected) are tied up in the RAID configuration and are therefore not available.  If so, can I somehow disable the RAID configuration?  I also tried to install the destination as an external USB drive, but it remained unselectable.  After that a broad error with support Seagate, the only thing that can seem to work is to start from scratch, reinstalling the operating system and from there, something I do not.

  Any suggestion would be appreciated.

  Thank you

  Found the solution!  Splash screens pass so fast that sometimes I can't read them.  Finally, to see the screen that says I had a MBR ERR3.  I ran the restore USB and fixed the MBR.  Now, all the disks are visible.  I want to thank you for your time and your advice with my problem.

  Thank you

• background image problem

  Hi, I have a strange problem with my project, I have a background image JPG (271 k) set as the background of my front (option in the Center), if I load the VI this race 6-7 cycles per second in a loop of cheating, but if I VI and put the background image to NONE, and after that, I have re - adjust my image as a background and run the vi it run at 20-25 cycles per second It's so crazy... I can't understand this is possible and I'm going crazy trying to solve this problem.

  
  

• 16-bit to 8-bit conversion image problem

  Hello, I am projecting a 16 bit image to 8 bits for the special criteria. I met a problem when the image is 8-bit cast, the entire image is black, creating an error that correctly says that the contrast is low (which makes sense since there is no value). With the help of one other programs I am able to convert 16-bit to 8-bit fine. I tried to play with the update option several times in the distribution of images vi nothing helps. The 16-bit and are both the 8-bit unsigned image. I'll attach pictures and a photo of the code below.

  I thought about it, I had to convert manually to 8 bits to get the right values for the pixels. The 8-bit image resembles the 16 bits one now, allowing me to pattern matching in my vi. It seems as if the use of unsigned 16-bit images and try to convert to 8-bit through the Image of cast iron work sometimes it pixel values are not converted correctly.

• WPF graphics export to image problem

  My problem is that I created a new custom personalized using the chart wpf OR as a base. The control includes mainly the chart, its axis and legends on a grid. To allow the legend be moved, I put it in a grid of the child. My problem is that he was trying to export as an image control, I use the code below (similar to wpf graphical image export):

  Rect bounds = LayoutInformation.GetLayoutSlot(MainGrid);
  var bitmap = new RenderTargetBitmap((int)bounds.Width + 1, (int)bounds.Height + 1, 96, 96, PixelFormats.Default);
  bitmap.Render(MainGrid);
  

  My problem is the axes and the edges of the image exported to the Clipboard is dark as shown below. Is saved in the image, the edges are quite transparent but better (not visible in the photos app but visible in the paint). My question is why is this behavior and how can it be avoided?

  Thank you.

  

  The problem is the default color of the grid or niGraph in WPF is transparent. I simply changed color or image now saved correctly.

• Image problem & sound doesn't work is not in my computer Windows XP__Media Center

  Recently I installed a (internal) Hauppauge WinTV-HVR3000 tv tuner in my Dell Dimension 9150, inlet antenna has been installed directly into my Tv Tuner, image appeared in an image, as if the image was in slow motion, as I don't have any sound that passes through. I tried via a Freeview digital set-top box that the same problem occurs.
  What I'm trying to do, is to get TV via my Windows XP Media Center program. Hope someone can help me.
  Concerning:-SCORPION1948

  Hello Scorpion1948,

  Thank you for your message.  Please click the link below and download/install the latest driver for your tuner.
  http://www.freedriverload.com/all18626.html
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• pc Windows vista restore mirror image problems

  I have windows vista and make regularly a full image backup of my pc. Have reinstalled before and it worked. I now need to reinstall the backup mirror but having booted from the windows vista disc and selected repair etc pc means that it cannot find the backup. I know this as I can see it from another pc.

  I understand this is a problem common does anyone have the solution because I don't want to do a full rebuild.
  Thanks for your help
  Peter

  Hello

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Default image problem

  I have a problem with my images on Windows Movie Maker 2.6 and I was wondering if there was a way to get back all my photos in default durations. Like saying, you set a default time like 10 seconds, and your photos are all in 5 seconds. Is there an easier way to change all the images in my times of delay?

  I have a problem with my images on Windows Movie Maker 2.6 and I was wondering if there was a way to get back all my photos in default durations. Like saying, you set a default time like 10 seconds, and your photos are all in 5 seconds. Is there an easier way to change all the images in my times of delay?

  ================================
  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.