Device is looked

Similar Questions

• How to determine if the user of the mobile device is looking at a site office?

  Hello

  
  We have activated the Mobile support for a site.  So now, when a user on a mobile device go to the website they see mobile model.

  The mobile template includes a link to the user to view the full site: < a href = "/ index.html? visitorDeviceClass = desktop" > full view of the Site < /a >

  We want to add a link 'view the Mobile Site"on the Office site but only for users of mobile devices.

  We tried to {{globals.cookie}} and {{globals.visitor}} to see if there is something we can watch (using javascript) to determine if we have a mobile user who visits the site of the office.  But it looks like visitorDeviceClass and deviceClass are set to "desktop" for real desktop users and mobile users who clicked on the link "View Full Site.

  We believe that we could be able to watch her User Agent but do not know what OS is displayed for Windows phones and we are not dependent on not user agent.

  Question:

  Does anyone know of a way for us to determine if a mobile device user look at the desktop version of the site so that we can add a link 'view the Mobile site?

  Thank you

  sepyh

  Hey,.

  You can basically determine the device of the visitor to the site in two ways:

  • how Robert mentioned, using the module of system_visitordeviceclass - http://docs.businesscatalyst.com/reference/Modules/General/system_visitordeviceclass.html
  • using globals liquid - {{globals.visitor.deviceClass}} - Globals. Catalyst of business support

  Hope this helps,

  Mihai

• Portege R600-140: message says: device would work better with USB 2.0

  R600-140 win 7 prof
  I plug in a device of capture usb video and a popup appears saying (roughly)

  + This device would work better with USB 2.0 - Click here for a list of usb ports.

  I thought all the usb ports 2.
  I just checked the drivers in the Panel, and I thought they are all up to date.

  The laptop supports without a doubt USB 2.0 ports.
  I guess that this message can appear for many reasons: for example the USB device malfunction.
  Also the problem of USB port could be responsible for such error.

  So as the first workaround I recommend you remove the USB hubs and controllers in the Device Manager list.
  Open the Device Manager, look for the controllers and USB hubs and uninstall the driver.
  Reboot the laptop

  Usually the system will begin to recognize USB devices.

  Note: during this procedure, all external USB devices must be disconencted

• 179tx 15ac HP: hp 15ac179tx not find bluetooth device

  When I connect my laptop with my cell phone he found no mobile device

  looking for bt do not find it please help

  Hello:

  It works fine for me, so the problem must be on your side.

  I'll give you a somewhat older driver (because there are not the newest) and if she's not even download, try to get it from another network or PC.

  This package contains the installation package driver for Realtek Bluetooth in laptop models running a supported operating system.

  Exit the: 26 April 2016

  Version 1.0.0.52 Rev.A

  File name: sp75614.exe

• Qosmio F10 - devices USB is not recognized correctly

  Hello
  I had major problems with the USB ports on my Qosmio F10. Everytime I try to plug in a USB device, the F10 recognizes there is only something there, but always categorizes him as an unknown device. For example, whenever I try to attach a USB mouse, he is instantly recognizes her not, even after already spending in the Device Manager and manually install a driver.

  This has been the case since I bought the laptop 5 months ago, but I can't ignore it any longer.

  I have already tried:

  -uninstall all drivers and USB controller hub and reinstall
  -ensuring that the power save to usb devices was unchecked
  -check "install anyway" in the driver signing options

  When I open the Device Manager my USB key looks like this

  -Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller - 24 CD
  -Intel (R) 82801DB/DBM USB Universal Host Controller - 24 2 Serial
  -Intel (R) 82801DB/DBM USB Universal Host Controller Serial - 4 of 24
  -Intel (R) 82801DB/DBM USB Universal Host Controller - 24 7 Serial
  -USB Root Hub
  -USB Root Hub
  -USB Root Hub
  -USB Root Hub

  Any help on this is much appreciated as its driving me crazy :-)

  Hello

  The entries in Device Manager look ok.
  If the laptop recognizes the USB device, so everything is ok. If the device appears as an unknown device in Device Manager, you need a driver in particular. Sometimes, the external device needs a driver that should be supplied with the device.

  I assume you are using the Toshiba Recovery CD. In this case then phone has pre-installed all the drivers needed and you don t need the 3rd USB controller drivers.

• Satellite A100 and USB audio device problem

  I bought "toneport ux2 line6" and it does not work with my computer laptop (dual core 1, 73GHz, 1 GB ram, Windows Vista).

  The problem is when I listen to music through this device, it looks I would look scratched CD, from time to time that there is a short interruption. The same thing happens when I'm with gearbox (software that allow you to play the electric guitar using audio device). I checked everything, including change Windows XP OS.

  I have the latest drivers for the port of your (compatible vista), I downloaded 3.5 mechanism, only toneport is connected to my computer, I have disabled all installations flashing in vista, power management is scheduled for high performance. I disable the sound card. I checked my cell phone with line6 monkey and it says everything is ok. I checked the audio device on my friend's Office, and it works well.

  I desperately need help.

  Hello Marcin

  In my opinion, you must be sure your laptop running fine and according to your assignment I do not here no problem.

  So in your case you have problem with some additional equipment or third party software. Am I wrong? If there is a problem I see no reason to seek the solution with Toshiba. You should contact the manufacturers of all the devices and software that you use. They should have enough experience with own products and they should offer good support in troubleshooting.

• Installation & looking for drivers XP for Satellite P200 - 1C2 Solution

  I see here many have problems with installing windows and drivers for xp.

  XP installation
  A normal sp2 installation cd will not be able to install windows on the laptop. You need the S - ATA for Intel drivers.
  You can download the site http://www.Intel.com or
  http://www.connect.de (search Intel_SATA_965.zip)

  This driver is for XP and Vista, a Core 2 Duo processor.

  -Download nlite to www.nliteos.com.
  -Copy the files from your xp cd to a folder on the hard disk as C:\XP_CD
  -unpack the drivers to a folder on the hard disk
  -launch nlite, choose the xp folder and continue
  -ignore the form 'sessions' and continue
  -Choose pilots and the possibility to make an iso and continue
  -Open the drivers with nlite (folder with multiple files)
  -Click on the name of the driver one continue with ok
  -choose "textmode driver" mode and select all drivers in the list box (use ctrl)
  -continue to nlite and burn on a cd setup

  Now you can boot from the cd and install windows xp

  Audio driver
  Many have problems with the audio driver, it does not work. Here, I explain how I solved the problem on my laptop:
  -go to the Device Manager
  -look for uninstalled 'pci device's
  -Right click on it and install the driver
  -Let windows automatically installs the driver, it will show one uninstalled HD Audio definition Driver
  -Now, you install the Realtek driver

  Display driver
  For my laptop, there is no screen driver download for xp, here I explain to ati, how to install the original driver
  I Don t know how to solve the problem with nvidia graphics, but maybe there, he works to

  -Download driver catalyst newes at amd.com
  -try to install, it will make a folder in C:\, but won´t install
  -go to the Device Manager
  -Right click uninstalled the VGA card and choose install driver
  -take the last option, the auto driver, continue
  -ignore the next form and continue
  -choose to install the driver of a data medium
  --aller go to C:\ATI\Support\Drivers\, find the inf file and open
  -Choose your graphics card for example Ati Radeon HD 2600 Pro
  -install the driver, windows will say, the driver may not work, but it works!

  [Edited by: admin]

  Very useful and interesting display. I m missing information.
  Could you please say what laptop do you have?

• Pavilion Sleekbook 14-b001tx: there is no wireless devices

  I just installed a fresh copy of windows on my HP Pavilion Sleekbook 14-b001tx 8. I installed all the drivers. But in device manager it is a yellow mark 'network controller '.

  My problem is that I am not find my wireless network. When I go to PC settings > wireless, it says "no wireless device is available.

  When I try to add a device, it looks and says "no device is available.

  If I connect my router cable directly to my laptop, ethernet works. But still wireless connections do not appear even wireless icon on the taskbar.

  What I have to do?

  Kindly help me

  #SHS

  Hello:

  When you see a labeled device network controller!... that is the wireless card that needs a driver.

  I looked at the list of parts for your laptop and this indicates that your model comes with an Atheros card free wireless/bluetooth.

  These are the drivers that you need for this model of the wireless card.

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  File name: sp63802.exe

  This package contains the installation package driver for theQualcomm Atheros Bluetooth in laptop computers operating system models supported runningâ.

  File name: sp64259.exe

• Device simulated in MAX, auto test without error and has work Test panels, but is not displayed in the DAQ assistant.

  I am trying to create a development machine, where we can test the new code without using our physical hardware. I followed this guide to set up a system of simulation. I get to step 3.2 b, but the device does not appear in the DAQ assistant. MAX, the device self test and gites calibrated successfully, and when I open the test panels, I see some sort of signal. I guess that's a default entry simulated since I didn't that device to look for anything? Note that two devices, I am creating the show upward into the devices section and Interfaces, but that, even after running auto calibrate, automatic Calibration date is not yet specified.

  

  When I try to test the device and create a voltage according to the guide, I can't see a device in the creator of data acquisition task.

  

  Steps 1 and 2 of this guide are of course met. Step 3 is not, but this is not surprising because a simulated device is in device in any case manager. Also, I'm not under RT, so step 4 is satisfied.

  Someone at - it ideas?

  That would be because the PXI-5124 is a digitizer not an analog input device.  You must use the NI SCOPE not NOR DAQmx driver

• Can LabVIEW control a device series (RS232) via a USB port on a Mac?

  Using LabVIEW 6 and operation of G4 Mac OS 9, it was once possible to use a USB port for control and acquisition of data of a pH meter in our laboratory. Only, we used "Serial Port Init.vi" and wired to port #0, which referred to the USB port. We connected the connector DB9 to the pH meter to the Mac's USB port via a USB-to-DB9 adapter. LabVIEW 6 could then send commands to the pH meter and acquire pH values of him using the serial port, reading and writing icons. I try to do the same thing now using LabVIEW 8.6 on a Mac Pro OS 10.5.6 and leads nowhere. The simplicity of LabVIEW 6 is long gone, and it seems to be necessary to use VISA icons. When I write the vi using the icons series VISA, three potential serial ports appear to be available. However, the vi gives an error message, except when I choose a specific of these, ASRL2::INSTR, under the name of the resource, in which case the vi runs, but there is no communication with the pH meter. I can't understand what physical connector on the chassis Mac corresponds to ASRL2::INSTR, but it is does not seem to be the USB key. I tried to write the vi using the icons of VISA USB of LabVIEW, but which requires knowledge of USB communication protocols which is beyond the expertise of this chemist. So, I'm almost at a loss what to try next. I could buy a serial RS232 card to install in a PCI Express slot in the Mac, hoping that he will be recognized and can be resolved by using the icons series VISA. However, as it was once trivial to perform this task of communication via the Mac's USB port, it seems that it should not be necessary to buy another card. LabVIEW continues to become more and more complicated, and if she doesn't get any more improved, it may not work at all. I've been programming LabVIEW on Mac for almost ten years and she became gradually more frustrating. In any case, is - anyone out there fought USB / communication series battle on a new Mac and won? If now it is impossible, no matter which allowed to pass through a RS232 serial installed in a Mac Pro card? Any help will be appreciated. Thank you.

  Ken1,

  I don't have a chance to see the USB-serial last night.  I'll make a note to try it again tonight.

  Dennis is right.  You need to focus on the determination of what works or not in communications.  Look at the system information (Apple menu > about this Mac > more info...).  Then select the USB item in the list of the contents of the left column.  See if USB devices to look like they could be serial port emulators.  I don't remember exactly what they are called.  If the device doesn't appear like USB Raw, it probably means that no driver has been installed.  You can unplug the unit and see what are the changes.  This will tell you if the operating system sees the device.

  Lynn

• In Device Manager, OTHER DEVICES has yellow question mark

  I always have problems with sudden black screens with auto restart.  It has been suggested that I get a new video driver, so I went into Device Manager, and since there is no list for video devices, I looked in the other devices section (which has PCI Simple Communications Controller, SM Bus controller, video controller, and video controller - compatible VGA) there is a yellow question mark next to each one.  I opened each of them and read, "Unknown manufacturer", and "the drivers for this device are not installed (Code 28) ' how to find who is the manufacturer and model and the version?

  It might be true that it doesn't work with Windows 7, I never said it would work with Windows 7 (it's the XP forum, don't forget!) but there may be something similar.  Since WIndows 7 is so wunnerfool, they just left that have a completely since there must be no need for this.

  99% of the things on which I work is some flavor of Windows Server, XP or Citrix and haven't seen nobody wants to even consider moving their campus everything to Windows 7 and I do not see happening any time soon!  It is not in their plans at all.

  I support a handful of populous (just a few) who have systems that require Windows 7 for some features and other things though, but they are just itty bitty compared to the basic XP installed.

• received message one of the usb devices attached to this computer has malfunctioned - help please

  I received the error message one of the usb devices attached to this computer has malfuctioned and windows does not recognize.  I removed the hub and got the same message when using devices directly into the computer.  I tested the devices on another computer and why have been recognized without problems.  I tried all the patches as in Device Manager, looking for the software upgrades etc.  Suspect that this has happened when a member of the family visit charge pictures from a flash drive to update his facebook site - I do not know if all programs have been loaded to remove/uninstall but do not know that it would have been the 26th Dec - please help

  Hello Ann,.

  If it is a laptop computer, shut down Windows and remove the battery and the power supply of the PC.

  Wait a few minutes, and then reconnect the battery and start Windows.

  Plugin your device to see if it works, without the hub.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have no audio device under xp pro. Someone at - it a? Where can I download it?

  What I do on this issue is driving me crazy

  Since your site of so important an OEM PC manufacturers, for example Dell / HP or laptop.
  If generic PC from your site from manufacturers of motherboard or card may be its maker.

  If it worked before, and you made the mistake of installing drivers WinUpdate, then Control Panel > system > hardware > Device Manager
  Look for the device with the exclamation point & back the driver

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unrecognized USB device if I use more than four devices. WTF.

  Hey,.

  I currently use a 32-bit version of Windows Vista.  I have six slots USB which is given to me.  I use four of them at all times to my keyboard, mouse, WiFi adapter and the headset.
  Whenever I'm trying to plug a fifth device I get the error: USB device not recognized.  However if I unplug any other device, the new device will work perfectly.  And then if I try to re - connect the deleted device back in, it will not work until I have remove the fifth device.
  WTF?

  It is certainly not a question of power that I have decent food.  In addition, why inlcude 6 USB slots if there are only 4 can work at the same time?  I tried Googling for a solution and learned that a computer must be able to handle up to 127 devices, anyway.

  What can I do to fix this error?  Do I have a virus or something?

  Hello

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and ask for their
  Forums about known issues. Look for the updates the BIOS, chipset of low level drivers, and others
  drivers.

  There could be a power problem that the USB interface can supply only so many devices at a time. If
  power is part of the question, then external, powered USB Hub will help.

  -------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">