Time dilation of a curve with interpolation table 1 d?

Similar Questions

• How do VI with timestamp table entry

  I'm doing a sub - VI for a program and I need to have a double array, boolean and an array of time as an entry stamp. I can't find a way to mark the entrance with a table timestamp however indicator. My only choice seems to be double and Sub. Is it possible that I can do this?

  You have a block of empty array on your front panel and then move there a timestamp control.

• How can I do a summation of a table summarizing several points once, leaving me with another table?

  Hello, I tried to find a way to do the summation of a table, the sum of 19 points at a time, leaving me with another table.  I feel like this has a simple solution, but I'm not sure how.

  Thank you.

  A time loop that contains the subset of the table can do.

  Lynn

  

• Problems using the tools of accessibility on PDF interactive with complex tables and fields in form (in AcroDC)

  Hello

  Although I worked earlier in the accessibility check (will be abbreviated as "axs" later) before using the Checker axs documents, what he used Windows and Acrobat XI a year ago. I am now responsible for creating interactive forms that are available on a Mac (platform I prefer), that have been designed only visually in InDesign, then transferred in Acrobat X or XI where someone placed the form fields and then handed to me to settle the tab for end-users order and make them accessible to people with disabilities (Government org). Problem is, some of these documents are extremely dense arrays, in which each cell of the table is a checkbox or a radio button I have several questions:

  (1) the order of reading has something to do with the tab order? (I spent hours to get the tab order works the way it should and do not know if by clicking any axs tool that will change and cancel all my work.)

  (2) I need to mark an entire page, more or less, as a table but when I am in reading of editing tool (TURO), I get the crosshairs of hanging around that object, but when I go to playback control panel, and then click Table, everything is deselected and nothing else happens. My goal is to get to the table to label the lines headings and column editor, etc. What is going on? What I have to do all this in the Panel tags instead?

  (3) in the Panel tags, I see a table with 30 lines, which is what I have visually, but when I select the TRs and TDs nothing gets selected on the form, so I don't know how to get the content of the form "in" these TDs... it is a very complicated document and I'm getting confused. " Not a lot of experts out there on Axs AND Acrobat DC dealing with this and I'm frustrated! There's a guy on Lynda.com including videos watched re: similar topics, but in his case, he got a table which is just text and it is small, and his method is by selecting each cell of the table with the cross and he the tags labeling a 'cell', and then go in the Panel and work on the appropriate type / # Table elements slide autour stuff in the appropriate lines etc. My picture has lines 30 and 13 columns, and approaching the fields of interactive form in most of the cells... This is not practical, but do not know if there is a quick/accurate way to get the table recognized otherwise?

  Any help is appreciated...

  Sorry,

  Very frustrated

  Yes, treating large complex tables can be the chore of accessibility PDF much time and frustrating. First question - these tables of data or layout tables? Several forms are organized visually using layout tables, but do not really present data organized in rows and columns. Marking this content in a table would be run against failure condition Matterhorn Protocol 15-004, "content is marked as a table of information that is not organized in rows and columns. Instead, work in the Tags pane, drag all the elements of content out of the structure of the table and re-tag/organize according to the needs. The Suite of PDF/UA reference has an example of form (document 10) that you can refer to-although its layout tables is relatively low. A simple structure, detroit forward should be easier to fix at a large table and also easier for a user to read assistive technology.

  However, if these are legitimate data tables... I find the reading pane to be worse than useless. The Tags pane sets the reading order for assistive technology. Something that I find useful is to break down a complex table into manageable pieces, clean up the subtables can recombine. You can also consider assessing NetCentric CommonLook - I do not use it, but it has a good reputation for working with arrays. I don't think it's available for Mac, however.

• import with truncate table

  Hello
  
  I want to update dev. schema with schema of Production are both on different databases.
  I use 10.2.0.4.0 on Unix.
  
  According to the needs of the application team I want to truncate all Tables. dev, who were already there. (without a structure a fall from the table, PK, and other indices associated with these tables.)
  And then I have to import data using IMPDP.
  
  I can do this with CONTENT = DATA_ONLY option while impdp. but my question is
  
  1 import will take more time as PK and index are not deleted?
  2. do I need to rebuild the index and PK after import?
  
  I'm doing the testing but want to know about your experience.
  
  Thank you.

  IndianDBA wrote:
  Hello

  I want to update dev. schema with schema of Production are both on different databases.
  I use 10.2.0.4.0 on Unix.

  According to the needs of the application team I want to truncate all Tables. dev, who were already there. (without a structure a fall from the table, PK, and other indices associated with these tables.)
  And then I have to import data using IMPDP.

  I can do this with CONTENT = DATA_ONLY option while impdp. but my question is

  1 import will take more time as PK and index are not deleted?

  Yes

  2. do I need to rebuild the index and PK after import?

  None

• Need help writing an update / insert with linked tables

  I am new to ColdFusion. I am learning to write querys and creates a small application to collect information from visitors to my web site. (It's also a good way for me to learn this language) I'm having a problem and it is not only the way to use an update / insert with related tables. I don't know if I'm still gather the appropriate variables to compare them to existing DB records until his execution is the update or insert some querys. Can someone help me, show me how can I update / insert related tables and maybe tell me if I create the varibales good to the compairison? This is my code, I commented out.

  <! - creating a variable to compare with the db table - >
  < cfset userIP = ('#CGI.) REMOTE_ADDR #') >

  <! - run the query and compare the cfset cell remote_addr - >
  < name cfquery = 'userTracking' datasource = "" #APPLICATION.dataSource # "dbtype ="ODBC">"
  SELECT REMOTE_ADDR
  Of user_track
  WHERE REMOTE_ADDR = #userIP #.
  < / cfquery >

  <!-if the record exists, then run this update-->
  < cfif userTracking EQ userIP >
  < cfquery datasource = "#APPLICATION.dataSource #" >
  UPDATED user_track, trackDetail
  SET user_track. REMOTE_ADDR = < cfqueryparam value = '#Trim (CGI.' ' REMOTE_ADDR) # "cfsqltype ="CF_SQL_VARCHAR">.
  user_track. Browser = < cfqueryparam value = '#Trim (CGI.' "HTTP_USER_AGENT) #" cfsqltype = "CF_SQL_VARCHAR" >.
  user_track.visits = visits + 1,
  trackDetail.date = < cfqueryparam value = "#Now ()" # "cfsqltype ="CF_SQL_TIMESTAMP">,"
  trackDetail.path = < cfqueryparam value = "#Trim (PATH_INFO)" # "cfsqltype ="CF_SQL_LONGVARCHAR">"
  WHERE REMOTE_ADDR = < cfqueryparam value = '#Trim (CGI.' ' REMOTE_ADDR) # "cfsqltype ="CF_SQL_VARCHAR">
  < / cfquery >
  < cfelse >

  <! - if it isn't, then insert a new record-->
  < datasource = "" #APPLICATION.dataSource # cfquery "dbtype ="ODBC">"
  INSERT INTO user_track, trackDetail
  (user_track. REMOTE_ADDR, user_track.browser, user_track.visits, trackDetail.userID, trackDetail.date, trackDetail.path)
  VALUES)
  < cfqueryparam value = '#Trim (CGI.' ' REMOTE_ADDR) # "cfsqltype ="CF_SQL_VARCHAR">.
  < Len (Trim (HTTP_USER_AGENT)) GT 1 cfif >
  < cfqueryparam value = '#Trim (CGI.' "HTTP_USER_AGENT) #" cfsqltype = "CF_SQL_VARCHAR" >.
  < / cfif >
  visits + 1,
  < cfqueryparam value = '#Trim (CGI.' "HTTP_USER_AGENT) #" cfsqltype = "CF_SQL_VARCHAR" >.
  < cfqueryparam value = "" #user_track.userID # "cfsqltype ="CF_SQL_VARCHAR">,"
  < cfqueryparam value = "#Now ()" # "cfsqltype ="CF_SQL_TIMESTAMP">,"
  < cfqueryparam value = "#Trim (PATH_INFO)" # "cfsqltype ="CF_SQL_LONGVARCHAR">"
  )
  < / cfquery >
  < / cfif >

  
  I'm close on this? This throws any errors, but it is not no longer works. It is so obviously wrong. I get a cfdump the end of my query of compairison, but once it hits the stated case, it is lost.
  
  Thanks for your time no matter who.

  Newbie

  You must define the variable before you can use it.  You try to use it on line 1 of your model.

• Working with temporary tables in PL/SQL processes

  So I'm trying to write a PL/SQL process and I have some difficulty. Here's what I do:
  
  -Create temporary tables
  -Put the data in them
  -Use the data in temporary tables to fill the main status table
  -Remove temporary tables
  
  I'm running into some problems when I try to create the tables. If I do as I would in SQL Server:
  
  SELECT field1, Field2
  IN TempTable1
  Of
  …
  
  Then, I get an error saying that there is no such thing as TempTable1. If I say:
  
  CREATE TABLE TempTable1 AS
  SELECT field1, Field2
  Of
  …
  
  Then I get "found CREATE, Expecting CASE or another statement." I know that to truncate or remove tables in a PL/SQL, I use EXECUTE IMMEDIATE. I do the same thing for the creation of a table? If this is the case, how can I use run immediately on a query with apostrophe inside multi-line?
  
  Thank you!

  Use of temporary tables in Oracle is different from MS Sql Server.
  In Oracle, you create tables Temp the same way you would normally create a permanent table.
  Search syntax "create a global temporary table.
  Oracle global temporary tables are visible to all connections, but don't share all the data.
  The data are visible only for connections that introduced the data and are removed on commit / rollback, or when the connection ends.
  So Structure is permanent, data is temporary and exclusive to a single connection.

  If your process should look like this:

  Create global temporary tables - once - at the same time, you create all of the other tables in your system.

  -Fill the temporary tables.
  -use the data in temporary tables to fill the main report table
  -remove the data from the temporary tables.

  Information on the Temp in Oracle tables:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14231/tables.htm#sthref2213

  HTH
  Thomas

• I want to record with &lt; alt &gt; &lt; s &gt; in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  Question
  I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  edit, escaped mod < s > in order to avoid the line through question

  A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

  ALT + SHIFT + S

  and see if it works.

  I don't know of any way to change this so that the change is not necessary. There may be an add-on?

• Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

  2. they will not be usable until the restoration.

  (140480)

• When I print a table (multiple pages) the text box under the table seems to be moving under the table and prints with the table of this overlap. My only solution is to push the text box further down the page before printing... Any advice?

  Im having problems shaped a text box so that my table does not print right on top of it. I want it inside of my table (it's 'tems and conditions' budget)

  Any advice would be great.

  I face the same problem as well. Would like to know if there is a better way to get the text box to move with the table instead of the effect that overlap. Have to manually adjust the layout, whenever I want to get a reasonable print of a document (or export it to PDF) seems counterintuitive, especially when it causes the document seem ill-disposed on screen.

  I am running version 3.6.2 of the numbers in the case where that matters.

• Time Machine does more work with LaCie hard drive

  I've been using a LaCie 500 GB external hard drive to backup Time Machine and it works with any problem for almost month. That the player has filled, older backups have been laid as is supposed to be the case.

  Now, I get a message saying that the disk is full, and that the backup has failed because there is not enough space. There are only 3.05 GB of available space, and the error message indicates that the backup drive should 4.7 GB for backup. I can't eject the disc, as the process seems to be stuck, and I can't close it. Any ideas how can I either rectify the problem or close the player and replace it with a bigger?

  I'm on a desktop iMac, Yosemite running.

  Contact LaCie technical support, read the user manual or post in the forums.  Better yet, since you are probably still under warranty with them, call their tech Dept support.

  Search your number on the website of Time Machine.

  

• ProBook G3 450: Time assets 100% Intermittent drive with 0 kB/s read/write speed

  Hello

  I am facing an active time for intermittent drive 100% with 0 kB/s reading or writing speed with my G3 450 ProBook running on 10 to win.

  Meanwhile, the laptop does not. This effect always lasts exactly 60 s (visible in the Task Manager), and after that, the hard drive still responds once. Looks like some kind of timeout that happens after 60 seconds before returning to normal behavior. Sometimes the 100% active time occurs every few minutes and sometimes I can work for hours without interruption. So far I was not able to trigger the effect.

  A Google search on "100% active time" returns a lot of suggestions like disable the superfetch, windows search, and the background intelligent transfer service. None of this solves the problem. The hard disk drivers (Toshiba) and the (Intel) SATA controller are up to date. I already reinstalled Win 10 who do not help either.

  I have another problem with this ProBook. I don't think that this is related to this problem. However, you never know...:

  http://h30434.www3.HP.com/T5/business-notebooks/intermittent-loss-of-WiFi-connection/m-p/5582927#M13...

  I'm out of ideas. Any input is highly appreciated.

  Thank you

  Martin

  Well, in the meantime, I found a solution... I bought a new HARD disk that is supported to win 10. It's a little embarrassing that HP sells the laptop with Win 10 and it does not work as it should. But anyway: problem solved.

• CVI suggested help update on 'programming with the Table controls.

  Hello

  May I suggest adding a sentence to the chapter 'Programming with the Table controls', 'Creation and deletion of cells' section help of CVI.

  After the sentence "use the following functions to control the number of rows in a table control...". "I would like to add a suspicion that the number of lines is also affected by (programmatically) adjustment of the height of the table.

  Now that I've discovered, it's obvious ;-)

  Hi Wolfgang,.

  I think you might be misunderstanding this sentence in aid. It does not refer to the size of the table, in regard to the number of lines go in the table. It is in fact the number of real lines exist in the table. And the total number of rows in the table is absolutely not affected by the height of the table.

  Luis

• Is it possible to update a chart "XY" whenever a point is generated as with a "table"?

  Is it possible to update a chart "XY" whenever a point is generated as with a "table"?

  In the attachment, the XY graph, 'OUT' is updated once the loop is completed. I would like to be updated as data is generated inside the loop. Is this possible?

  Thank you.

  To make it work, you need to do the full table available inside the loop.  This means that you cannot use a tunnel of indexing at the exit to build the array. Instead, you must use a shift register and build the table inside the loop.

  This will do what you want.  It would have been easier to show you if you had posted your code.

• several curves with several ladders on the same graph

  Hello

  I am currently working on a project that include an acquisition of data VI. I want to display two curves with two different scales (0 to 1 and 0 to 200) on the same graph.

  I tried almost all the options in the Properties menu, I can't find something that fits what I want.

  Do you know how to do such a thing?

  Thanks in advance,

  Gabriel.

  Right-click on the existing scale and click on duplicate.

  EDIT: I would add that you need to set ActYScl via a property node to switch between the scales of the difference if you want to perform operations on them.