Time Machine backup system

Similar Questions

• error - 36 on Time Machine backup

  Help! I went on vacation for a week of my iMac running that yosemite was working fine when I left him. I left it turned on on my back, he had frozen, and disk utility showed that the player needed repair but it was irreparable. So I started from a system disk and deleted from my drive, hoping to restore from my Time Machine backup which was connected all the time. (I also have a Clone of Carbon Copy backup). But the Time machine backup restores, showing me "error-36". I'm quite familiar with the operations of Terminal "dot_clean", but when I try it tells me that the command is unknown. And, of course, the problem is with the Time Machine backup, not with my hard drive. is it possible to repair the Time Machine backup in my situation? I can't restore my backup CCC because my iMac can't see, had no installed system. I'm about to try to completely install the original Snow Leopard system from the boot disk and then either try to restore from time Machine, or migrate it again.

  Can anyone offer advice please?

  Check out this article first, probably you will find the solution being checked If you can not back up or restore your Mac with the help of Time Machine - Apple Support

• Cannot delete the Time Machine backups

  I have a MacBook Air and a 128 GB USB key that holds my library of photos, so I always make backups. My system - and I have recently made account how flawed it was - was to create backups on a 500 GB HARD drive, but to transfer them to a 2 TB HARD drive when it is full. So, I finally discovered that when I transfer backups in small quantities to the 2 TB, it takes more space because instead of aliases of files used to represent more recent backups, care of file just copied over and over again. For this reason, I put my 2 TB as a feature of time machine and imported all the old backups in the folder backups.db, that my Mac 'cleaned' and registered 135 GB. But 135 GB is not enough, I went and delete backups that I don't have anymore. When I looked in the trash to empty, I've seen 2 things: backups I have trashed and others who are pale sort out. I can't open the files, even if I right click and select "open in a new tab. When I try to "immediately remove" these paled-out files, I always get a message that they are "on duty." It is about 300 GB, so I must get rid of him. But it does not stop there, because when I try to "delete immediately" backups I had trashed myself, I get an error message! It is a total of about 600 GB, what I absolutely need to get rid of! If anyone has some tips, it will be greatly appeciated.

  You have probably sprayed your Time Machine backup database. The best thing to do is erase the disc with Airport utility. Then start again with a new backup.

  Good day.

• Time Machine - there was an error preparing the Time Machine backup drive (could not mount the drive)

  I have a new HD but cannot set up encryption with system preferences. After ten minutes, I get the following error message:

  "There was an error preparing the Time Machine backup disk (disc name) - could not mount drive"

  Apparently, I need to set up the HD in this way:

  • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT)

  It is not an option for the HFS + and so I used; OS x EXTENDED (journaled). GUID is ok.

  Can someone let me know what I need to do.

  Thank you

  Formatting: GUID Partition Table, OS X Extended (journaled).    (it is HFS +)

  For TimeMachine at best to a partition only.

  Do it again if necessary, then disconnect, reconnect, Start Time Machine preferences and "select disk".

• What do you call a time machine backup drive

  What you call a Time Machine backup excite my recovery system do not recognize so-called backup?

  Backup Time Machine can be any device external drive (use Time Machine to back up or restore your Mac - Apple Support) that you have configured for use with the TimeMachine.app

  or a Time Capsule (http://www.apple.com/airport-time-capsule/)

  On OS X Recovery - Apple Support

• How can I restore mac Time machine backup to most recent?

  So, I recently met several problems with my old mac. He started acting upward with the blinking folder and question mark more often. So I did multiple time machine backups and have since then tried to reinstall the OS and many other options, but it looks like my mac middle of 2007 has had its day. So I bought a new mac and tried to restore the back upward on the external hard drive. I get the message that his back is an older version and it cannot be restored and I should use from the other mac migration assistant.

  So the question is: If the first mac is burned and I can not restore settings etc of the time external hard disk machine, how to restore the whole upward? Can I transfer files only?

  Very much appreciated.

  g

  Hi Sir,

  You cannot restore data in time machine just like that. You use the data transfer assistant to recover your old records to your new Mac.

  The data that you used time machine made to your old mac are not available to your new mac. There is limitation of the system.

  Hope this could help you.

• What exactly does the Time Machine backup?

  What exactly does the Time Machine backup?

  We have a Mac Pro towers (NOT for sale) and Mac mini with several hard drives installed internally.   Time Machine backup all internal disks or just the boot disk?   This can be configured?

  Time Machine backs up your default boot partition. However, if you have more than one drive or partition on your Mac (and it is formatted in "Mac OS extended (journaled)"), you can set the Time Machine to save these drives too. You can do this by removing these drives from the list of excluded items in System-> Time Machine-> Options... Preferences, so that the next backup will include all internal hard drives or partitions that you want to back up too.

• Cannot transfer Time Machine backups on the new drive

  I store my backup Time Machine on a Seagate 1.5 TB drive when the drive starts giving errors.  I had files on this computer and was able to transfer all except for 2 who were on unreadable sectors.  Fortunately, one of these files was an older archived version that I could afford to give up and the other was a temporary file in the photo library and since all other items were okay, I think I'm good.

  The problem came when I tried to transfer my Time Machine backup of 800 GB for a new disk.  When I copy and Exact-paste (cmd-opt-shift-v) the Backups.backupdb to the new drive, it gets the extent of November 23, 2015 and then dies because reports of the Console to the system, it gets an IO error when you try to read:

  /Library/SystemMigration/history/migration-245250B6-4F52-4FBB-BD61-546A8C19CCD5/ QuarantineRoot/private/var/db/dyld/dyld_shared_cache_x86_64

  in the relevant backup.  And because it's an IO error it simply abandons the whole process so I have no backup from November 23, included, for now.

  Because the disc is unstable, I wasn't able to use disk utility to make repairs on it.  The disc is what is and I have to deal with the mess, that I do not have the disorder, that I would have.

  I tried to manually place the missing files in the database, but the operating system will not let me.  I want to just copy my backup / OS X stop abandonment and be more like Windows and give me the options to "try again" or "fail" instead of just quitting!  I mean, why should I lose my backup all hierarchy of 23 November and beyond, simply because you cannot read a file, a file that I could simply replace in the backup of the current version or you can just ignore it.

  I tried to copy files on and setting xattr on them to be backup items, but they are wrong.  I tried chflags parameter to make the writable directory, but it does not work.  I can't copy the missing files to fix my archives.  Help.

  Please, don't try to transfer backups of a failed drive. Placing the disk aside until you don't know no longer you need the data, then delete and recycle. Start a new backup set on the new drive. For more security, you always have more than one backup.

• Backup a Time Machine backup?

  When troubleshooting a Mac in the past, I had the frightening experience of him erase my Time Machine backup.  Fortunately, I was able to restore the backup on the disk.

  Now I'm troubleshooting a Mac, I have my external drive Time Machine and a blank disk.

  For security reasons, before making troubleshooting more away from the Mac, I want to back up the Time Machine disk to the blank disc.

  Of course, I could just drag - copy the folder of documents from one disk to another, but it can cause all sorts of permissions problems. Would it not possible (or better) to use a backup like Carbon Copy Cloner for this application?

  Try using disk/restore to copy the backup to a new location. Please note that this will reformat the destination partition.

  You can then go to system PreferencesTime Machine and add the blank disc as a backup drive.

• Two MacBooks, 10.11.4, a fast Time Machine backup and a very slow

  In our office at home, connected to a Gigabit ethernet on the same switch network, we have two MacBooks.  One is a 2011 MBP with a 1 TB SSD (third party), and is an MBA in 2015 with a 512 GB SSD (Apple).  A Linux server on the same network running Netatalk 3 providing the backup network drives, one for each laptop. The two TImeMachine network drives are on the same physical server drive.  Two laptops running 10.11.4 and darn are configured almost identically.  Neither laptop has no trouble finding the network backup drives, and they begin to run backups without problem.

  The old MBP was a workaholic and functioning flawlessly for years, including the fast and regular Time Machine backups. File unique restorations are done with some regularity, and they always worked (I don't think that once done, we use a complete restore of the system from scratch, and it worked).

  The new MBA, in contrast, had endless questions from and complementing the backups.  Last night, for example, I decided to simply reformat the drive on the server where there is a material error affecting the MBA (I ran Linux fsck to check the file system before you wipe it off and he's found no errors) and resumed full backups on two laptops.  The MBP has about 600 GB for the first backup, and complete the backup in about 5 hours.

  MBA, with about 350 Go back up, was still underway this morning and had less than half the backup is finished. In the console log, he showed he was backing about 5 GB/hour.  Not only that, but the incremental backups took a lot of hours (more than overnight), making it impossible to never complete because it must be packed and taken to work at some point in the morning.  I.e. backups are all simple broken on this MBA.

  The MBA connects to the network with a third USB3 (Anker) hub that has a Gigabit Ethernet port on this subject.  I downloaded iperf for Mac and Linux server and found that this is right about 900 Mbps throughput, so I expect an optimal bandwidth is achieved in this regard.

  Any ideas what might be happening here?  Diagnosis between the two to see what could be such a radical difference? Tried to change taps the network wiring/switch problems, without change. Reset, no change.

  We have two other Macs also running backups in this way, under 10.11.4,, and they were also without problem. Also is it just that an MBA, the most recent of the bunch, problems.

  A third-party file server is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the developer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any problems that result is for the developer (who will blame Apple, neither you nor anyone else but herself.)

• Time machine backup, but always encrypt?

  This is my first backup. I am 10.10.5 running on my mac pro book. Sound was support for 19 hours. Now, I have a notification on my office indicating the time machine backup, but TM system preferences menu States it is still encrypted. Am I done? Backups check is grayed out.

  If you chose to encrypt the backup, simply let him finish. Once this is complete, Time Machine should resume normal backups.

• restored my time machine backup mac - restarts not successfully

  After virus/malware unusable safari, I used my 'time machine' backups to restore my entire system (10.10.5).  I had the "restore msg."

  By design, it restarts.  I get the apple logo and progress indicator, but the bar spend about a third of the way and restarting stops there.  I tried

  reboot several times with the same results.  I then repeated the procedure for restoring above with a backup taken a week before and got the successful restore msg

  but had the same result with the reboot.  Don't know what to do next.

  Starts in recovery (command-R) Mode and choose the option Install OS X. Have it reinstall the OS without wiping the drive. Who should make the drive to be bootable again.

• You can use migration assistant to transfer the time machine backup external hard drive?

  Hello. I just bought a new macbook pro with a 256 GB flash drive to replace my previous macbook pro that had a breakdown of all the systems. My problem is that I have a time machine backup that is greater than 256 GB (it's almost 450 GB) and I try to find out if I can use migration assistant to transfer all the content directly on an external hard drive, then move the content I want on my hard drive from the external hard drive? My goal is to let my music and photos on the external hard drive and for all port hardware I need for work.

  I don't have access to another mac with storage well enough that I have the old HD so could potentially be installed in an external enclosure and extracted files directly from there if it's easier.

  What I intend to do in the long term is to buy a big external hard drive network and put all my photos, music etc over there and use the laptop as expected - that is for files from day to day - then it will be just a short-term problem.

  Any advice would be really appreciated.

  Thank you

  Nick

  Migration Assistant is user to transfer data from one computer to the other.  If I read your post correctly, you want to copy your data from Time Machine on another HARD disk.  Thia may be useful:

  http://pondini.org/TM/18.html

  Pondini website covers virtually all aspects of Time Machine.

  Ciao.

• Central Seagate NAS - "Invisible" Time Machine backup

  Running OS X El Capitan (10.11.3), have a central Seagate NAS connected to the same network.

  Struggling to locate/mount the Time Machine "partition" of the NAS using the Finder, even if the NAS works more or less perfect otherwise. For example, I have no problem to mount the NAS in the Finder and have accessibility without restrictions and read/write permissions to files on the NAS and visible files. I have also run the Time Machine backups with no problems, however, I can't physically locate the backup Time Machine (sparsebundle file) when you use the Finder. During the mounting of the SIN in the Finder (= "user1" user / password = *), I have 3 folders available and visible (with subfolders), "user 1", "Public" and "user 2". Unable to locate the backup in the any of these files.

  Then, when I run the terminal and run ' ssh ' user1@ipadressofNAS, then ´cd /', then 'data ls', I find several items, including the "Public" folder I mentioned, I do not see in the Finder above, and also a component called "user1.tm". Later in the user1.tm, runs "ls Data / user1.tm ', I find"mymac.sparsebundle"- that is.

  Then of course, the dedicated part time Machine is the NAS Server (I just pointed out Time Machine backup to the NAS Seagate available without being able to specify the directory), but I can not located this part physically using Finder. Just for reference, I also tried to find backups to the display of hidden files and directories using the Finder.

  Is it possible to physically see the backup Time Machine 'partition' in the Finder? I think that this was possible according to the default in some earlier versions of the operating system, but then the time Machine 'disc' disappeared as well as the evolution of the OS.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• Time Machine backup question

  I just bought a Mac Mini with TWO separate drives (ssd and hard drive) and I also bought a WD 1 TB of external drive to my Time Machine backups - so my question is:-How can I make sure that the disk WD and Time Machine will back up the TWO disks? and how do I configure this? Thanks in advance.

  Open the Time Machine system preferences pane, click Options, and check the exclusion list.

  (140555)