Time Machine does not believe that a volume is identical to an exact volume in doubles with the same name

Similar Questions

• Time machine does not take into account my partition which is case-sensitive.  Recovery has no data of this partition.

  I have a partition on my drive that is formatted for OS X Journaled, case sensitivity.  When I perform a backup, then recovery, all data in this partition is missing.  Time Machine does not recognize partitions of case-sensitive?  Strange, as the default format for Time Capsule itself is case sensitive.

  You cannot use the formatting case-sensitive with OS X. You will need to repartition the drive to Insensitive in full. You can not do any repairs or restore from a backup Time Machine.

• After upgrade to El Capitan Time Machine does not automatically

  Recently, I upgraded my Macbook Pro and iMac 24 to El Capitan.  Time Machine does not automatically work on the iMac.   I now use the backup to get a backup to run.  MacBook Pro is very well.

  Thinking that this might be the associated time Capsule, I removed the disc from the Capsule and ran Spinrite on it.  Car is very good.  Then I deleted all the files on the Time Capsule and created new Time machine backups on two computers.  No problem, except the iMac not run automatically Time machine.

  And yes the selection for Time Machine is configured to run automatically.

  A bug in OS X 10.11.1 prevents automatic backups that happens when a desktop Mac (iMac, Mac mini or Mac Pro) is connected to a UPS (UPS) with the USB feature.

  Please, back up all data before proceeding.

  First, check the App Store for a later update to OS X. If it is available when you read this review, install it and see if the problem is resolved. I speak not beta versions.

  Otherwise, you can work around the bug as follows.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please triple - click anywhere in the line below on this page to select:

  sudo defaults write /Library/Preferences/com.apple.TimeMachine RequiresACPower 0

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal.

  Restart the computer and test.

  (Credit for this solution for chrfr of logicielmac.com).

• I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I would get one that has 4700 comments already.

• Ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter. fact that associated with MSSE PUM & the boxes unchecked in MS security Center.

  Original title: PUM. Disabled.SecurityCenter

  I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter both at the Date of the registry in HKLM\SOFTE\Microsfot\SecurityCenter\AntiVirusDisableNotify & HKLM\SOFTWARE\Microsfot\securityCenterFirewallDisableNotify.  These two have been listed bad: Good (0) (1).  In the Malwarebytes wesite, I read that this has something to do with MSSE. In a commentary, he says it occurs if, in the MS Security Center, the notification "Notify me if my computer might be at risk because of my virus protection software settings" is unchecked.  I then went ahead & check all 3, firewalls, viruses & automatic updates. My computer seems to work well, except that the fan runs all the time (there are a lot of processes running & the CPU usage is very--often 100%, but the computer works fast).

  My questions are: 1) the PUM associated MSSE & the boxes unchecked in MS security Center; (2) should I click on "ignore" in the Malwarebytes scan? 3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?  Thanks in advance for your help.

  PC fan2

  Hello

  (1) is associated with MSSE PUM & the boxes unchecked in MS security Center;

  The following thread might answer this question: http://forums.malwarebytes.org/index.php?showtopic=69859

  (2) should I click on "ignore" in the Malwarebytes scan?

  Yes

  3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?

  Only, run antivirus software at the same time. Firewall must be performed, evil-ware bytes can be run at your pleasure.

• Return of the mistake of MUSE: why do we not have several files with the same name?

  Well - I thought I had all this worked and fixed, but I met the download error 'Why do we have several files with the same name' once again.  (I downloaded all the files several times today in order to 1) works the way it worked the last time and 2) get an OAM file that is not loading for some reason any load again and the download takes about an hour to transfer all the files manually.

  To recap:

  (1) an option "Upload only modified files" returns the 'Muse has encountered an error and closes.  Why do we have several files with the same name? "error just as before.

  (2) a full download will work but takes forever and is NOT a substitution for work changed files option.

  Please advise with possible solutions!

  -Dave

  Is it possible to have two .oam different files in different folders on your computer where the .oam files have the same name? I'm theorizing that there may be a bug in the treatment to ensure the folder created for a .oam placed on the server receives a unique name, particularly in the case of a partial update of the site on the server.

  Please send us the .muse file and all the files in .oam related to [email protected] along with a link to this topic for the context so we can attempt to reproduce this error and isolate the root cause. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. Thank you.

• A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  Hi all

  I have a 5.5 esxi server just the a virtual machine running at the moment. I try to clone this as shown below:

  http://nchrissos.WordPress.com/2013/04/22/cloning-a-VM-without-vCenter-in-ESXi-5-1-free-edition/

  However, I get the error:

  A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.

  I have no vcenter (yet), and it's just the 1 vm. The virtual machine is turned off. I get this error regardless of the name, I said that when I choose "add to the inventory.

  All advice appreciated.

  Thank you

  Oh dear...
  you read bad advice on the internet and then you get also the stupid advice here.

  Ignore both!

  If you want to clone a virtual machine by copying - do it like this:

  Create new virtual machine with the wizard.
  Skip creating a disk for new customers.

  In Datastorebrowser copy the original vmdk to the new dir, which has been created by the wizard.
  Reopen the new VM and edit - assign the vmdk that you just copied.

  The procedure of the blog is not supposed to work.
  Sissine trick doesn't make sense either

• How can I search all subjects in my guide? and if this is not possible, how do I get books have not not subjects with the same name?

  How can I search all subjects in my guide? and if this is not possible, how do I get books have not not subjects with the same name?

  "People need be able to find these without having to look inside each book TOC.

  Sorry, but I'm not a big fan or user of this sensitive arrangement "New kid on the block. Therefore, it may be that I am simply misunderstanding because I do not regularly use it. Of what you say, it seems to me that if you (or more precisely your users) are not able to click on the right side, where he says 'Getting Started' or 'List of Email Campaign' and see these topics open and view the content with search terms highlighted?

  Regarding the "bookmarks", those that are normally visible by the user and will be not viewable unless the name of the bookmark appears also as text within the topic. Although, if the two are different, you could probably get there by adding the name of the bookmark as a keyword search in the properties of the section.

  

  In any case, I feel that at this point, I can just be frustrating you and you may need someone else to try to help that probably better understand the issue.

  Sorry, I was not able to help.

  See you soon... Rick

• Backup Restore Time Machine does not see RAID external drive

  Hi all

  I have a problem with my iMac restore from a Time Machine backup, and I was wondering if anyone else had the same problem already.

  I had to reinstall OS X El Capitan from scratch, based on education, I received Support from Apple. That worked without problems and my iMac works fine. However, I wanted to restore it to how it was before, using Time Machine. I keep my backups on a LaCie 5big Thunderbolt 2 and never had any problems with it.

  To restore the system, I followed the instructions on the Support page. I restarted my system in recovery mode and selected the "restore from Time Machine backup". Unfortunately the LaCie 5big does not appear on the list of drives, so I'm stuck... When you use the system in normal mode, the external RAID is visible and Time Machine stores backups on it without any problem.

  Any of you are familiar with this problem? I would be very grateful if you could help me with this problem!

  Kind regards

  Valerio

  Hello

  -While the system is booted in recovery mode, confirm that the Lacie 5big network is visible in disk utility.   You will need to disconnect / reconnect the Thunderbolt cable to the Lacie 5big be detected.

  -Once seen, a new attempt to restore from Time Machine backup.

  See you soon

• Time Machine does not register the last backups

  In Time Machine preferences, it signals that the last backup is June 2, but when I go to Time Machine I don't see what

  which seems to be backups in recent days.  How do both to sync to declare the same data?

  

  • Assuming that your profile information is correct, OS X update to the latest version: How can I update to OS X and Mac apps - Apple Support.
  • If you do not already done, simply connect / again or restart your Mac.
  • If you back up the contents of the source that lies in the external devices, make sure they are all operational, mounted and available.
  • If the last time information and the date are still incorrect, continue with the steps below.
  1. Confirm that a backup is not already underway. Then, scroll down to 'Add or remove backup disk... '. "and select it. Choose 'Data' and then delete.
     • If everything works as it should, this will not affect your existing backup history. However, if you have done this until now it is not working as it should, and in an abundance of caution you should consider creating an additional, redundant backup first. If you work with the data that you just can't live without, that a backup is not enough in any case, even if everything works perfectly.
  2. Then select the drive again, connect you and choose 'Back Up Now' in the Time Machine menu bar icon.
     • If you have added previously any exclusion of the element (under the 'Options... button "), you will need to add.
  3. Time Machine will take a lot of time while it makes a 'deep event' scan to determine which files need to be backed up. Meanwhile "preparing backup...". ' appears in Time Machine preferences.
  4. When the "scan deep event" is over, Time Machine will perform a normal incremental backup, which will have the usual amount of time.

  That should correct the erroneous information.

• How is it all my email that comes from facebook comes with the same name

  All the mail that comes from my facebook has the same name as wenfel sand when his mother, wife, friend ect.
  What I've done and how to fix

  Because somewhere along the way you have saved an email from Facebook to your address book, and it has a name associated with it. Will find this contact in the address book and delete the name.

• Time Machine does not work after update of the Sierra

  The time function machine my Mackbook Air 2011 stopped working... it has not been saved since update for Sierra, it only take screenshots every hour, it will perform a backup is no longer on my external HD as before.

  There is no problem with the way it is implemented or the hard drive, it's me that my iMac is working perfectly since the update for Sierra and it's backup via the time machine on the same hard disk.

  It is a hard drive and put in place I was in use for about 5 years with no problems.

  Also since the update for Sierra I noticed that my MacBook Air gets hot and the fans go wild, although there was nothing or performance other than the system is auto.

  I lost the use of my built in camera after the update to El Capitan, and now I've lost the use of time machine... I was wondering if I should go back to Yosemite that everything worked well then!... is this possible?

  Thanks for any help with this!

  Update:-just so you know, time machine is to find the back up ok drive (external hard drive), it then goes to "preparing backup" and that's all, he remains in this preparation save the scene for centuries, after a while it just stops and it is saved all... nothing!

  Also noticed when I checked in Time Machine full backup I have before update for Sierra disappeared, he disappeared, been deleted... I don't know what is happening with it!

  Overall since the update for Sierra my MacBook Air did not work properly, in addition to all that Safari does not load, just to get the wheel spinning, and now (with the demise of my old back ups) it seems I can't go back to a previous state.

  My Mackbook Air took it!... the last update took the camera and really Sierra in... material not compatible with all new software, none of the new features work on my iMac or MacBook Air (only Siri), so a useless upgrade for me really, wish I didn't!

• Time Machine does not recognize the backups when you configure the external drive as a network drive

  I have a MyBook 5 to disk with a 1 TB partition that I used as a destination for Time Machine > 1 year now. I recently gathered the energy to connect the my book on my Airport Extreme Base Station (model 2014? the second model) to implement wireless backups. I plugged the MyBook on the base station, set up file sharing in AirPort Utility and created an account with access to the partition of TM on the MyBook under the section 'Sharing secured disk' utility.

  Now, when I open the time Machine, I choose this partition, but it does not seem to recognize that I have a string of backups already there. Then he tries to start a new backup. So a few questions.

  1. Should I abandon my old backups and start over? I don't think that I did nothing to my system in these last days that I would need to be careful, if I couldn't rely on a TM backup from that moment.
  2. Is there a way to get TM to recognize my old backups and start from there? I do not look down the barrel of a backup of time + 13.

  If 1, should I reformat the partition TM in order to start over? I don't see the older backups on disk when I look in the Finder, but I know that they are there and they are too much space. Help/suggestions appreciated!

  Inherit from a backup

  Inherit from a backup (2)

• Search for Time Machine does not work in the mail.

  Hello

  I'm trying to retrieve/view old e-mail my Time Machine ups back. I am backup on an external hard drive.

  When I get TM since the Mail, search application 'in time' does not work. If I go TM said Finder, or from the desktop, it works fine.

  I had to reinstall my OS and am trying to update on El Capitan, (thanks to the kind assistance of AppleCare!), but in the meantime I am eager to find those old emails.

  Any suggestions please? Thank you.

  Although you can restore a snapshot of Time Machine messages in the Mail application, it usually will not work with messages that were saved by an outdated version of the mail. In this case, you must use another method.

  Please triple - click anywhere in the line below on this page to select:

  ~/Library/Mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Open

  the contextual menu.* should open a folder.

  Enter Time Machine and scroll to the snapshot that you want to restore from. The folder named "Mail" are subfolders named "V2" and/or "V3" (according to the version of Mac OS X that was used at the time that the snapshot was taken.) Inside of one of these subfolders are several subfolders representing your e-mail accounts. The name refers to the email addresses that you use. Select the account folders you want and then select restore... to... in the action menu (gear icon) in the toolbar of the Snapshot window. Restore the files on the desktop and not in their original location.

  Import the mailbox in the folders that you restored to the office. The imported messages appear in a new mailbox. Move those you want to keep everywhere where you want and delete the rest. Then, delete the files on the desktop.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Time machine does not recognize my external hard drive Passport

  My 2009 iMac is 10.7.5 Lion BONES, 2.66 GHz, Intel Core 2 Duo, 2 GB of memory, 1067 Mhz.  I have 2.62 GB free on a hard drive 320 GB internal.

  My Passport external hard drive is formatted for Mac, 500 GB, and fully compatible with OSX 10.7.5.

  He worked well with Time Machine for four months and now is not recognized.  It is recognized by my Mac Air 2012.

  The Passport will run for about 10 seconds in the back to the top on Time Machine and then stop, with an error message, and then the icon disappeared from my screen.  Disk utility does not recognize.

  All that info and you are unable to share the message with us? Too bad...