time stamp on the xy graph

Similar Questions

• How can I set a time stamp for the setCreationDate(Date value)?

  Hi all

  My underlying database column has a DATE data type that needs of the data and the time stamp. When you use the following code to set a date for setCreationDate(Date value) the date is set, but there is no timestamp.

  Here is the code:

  protected void create (AttributeList attributeList) {}

  Super.Create (AttributeList);

  Begin

  Date currentDate = new Date();

  DATE creationDate = currentDate.getCurrentDate ();

  setCreationDate ((Date) creationDate);

  End

  }

  Can't wait to hear.

  James

  java.sql.Timestamp timeStamp = new java.sql.Timestamp (System.currentTimeMillis ());

  dateTime oracle.jbo.domain.Date = new oracle.jbo.domain.Date (timeStamp);

• View on the part of the seconds to the time stamp of the file "Update" in Windows Explorer.

  I wish I could see the part seconds the timestamp of the file "Date Modified" when I'm in Windows Explorer and using the details view.  I have Windows XP SP5 and have set up my file options to use Windows Classic view and my view is set to show the details.

  Hello PM_01,

  Unfortunately, when you view the date and time, in the Details view, you won't see the seconds remaining.  However, you can use third party software that will give you this option as well as many other options.  I hope this helps!

  Thank you

• Removal of Alternate data stream (ADS) does not update the time stamp of the file.

  I use the standard CL program stream.exe for the operation of the ads on file.

  If I add your ADS in a file, data\time file will be changed.

  F:\>dir
  23/07/2014 test.txt 32 768 18:43

  F:\>stream cr test.txt:0 important_info
  SUCCESS: tf1.txt:0 is created.

  RC = 0

  F:\>dir
  30/07/2014 tf1.txt 32 768 19:11

  If I remove ADS from file, the data\time file will be unchanged.

  F:\>dir
  30/07/2014 tf1.txt 32 768 19:11

  Tf1.txt:0 F:\>stream
  SUCCESS: tf1.txt:0 is deleted.

  RC = 0

  F:\>dir
  30/07/2014 tf1.txt 32 768 19:11

  Is this a normal behavior? I suspect a defect of stream.exe.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• You need to add a "Current Date and Time" stamp on the sheet of taxation using the SmartStream.

  I would use a 'factor of propagation', but don't know how to program to give the current date and time.

  Found the solution. Added this code:

  '#JobName '.

  the Element.Indd of propagation that is assigned to the tax.

  I had also added a current date; under Variables of Type/text I added

  day/month/year, and

  I've added the counter of the leaf on the counter of fields/counters/datasheet.

  Works very well. Registered as a master to automatically assign these three elements

  for each sheet of any tax without having to add varable columns to the

  the database.

  Hope it will be useful to others.

• Time stamp of the last modification of an object

  Hello
  
  I need to know the date of last modification of all objects in a schema. With what view I get this information?
  
  Thank you

  SQL> desc user_objects
   Name                            Null?    Type
   ----------------------------------------- -------- ----------------------------
   OBJECT_NAME                             VARCHAR2(128)
   SUBOBJECT_NAME                         VARCHAR2(30)
   OBJECT_ID                             NUMBER
   DATA_OBJECT_ID                         NUMBER
   OBJECT_TYPE                             VARCHAR2(19)
   CREATED                             DATE
   LAST_DDL_TIME                             DATE
   TIMESTAMP                             VARCHAR2(19)
   STATUS                              VARCHAR2(7)
   TEMPORARY                             VARCHAR2(1)
   GENERATED                             VARCHAR2(1)
   SECONDARY                             VARCHAR2(1)
   NAMESPACE                             NUMBER
   EDITION_NAME                             VARCHAR2(30)
  

  Guess what should be returned by SELECT

• How to see the time stamp of the file archived_log

  Jin
  
  
  How to find the timestamp of the file generation of archive log...
  
  
  
  Kind regards
  Deepak

  could you provide the exact query for that...

  Was it difficult?

  select SEQUENCE#,to_char(first_time,'dd-Mon-yyyy hh:mi:ssam'),to_char(completion_time,'dd-Mon-yyyy hh:mi:ssam') from v$archived_log
  

  -André

• How can I print my photos displaying the date and time stamp

  I have pictures in a legal context but do not understand how to print them displaying the date and time stamp.  The timbre of the date and time are necessary for me to present my case exactly.  Can someone tell me how to print with these marks.

  Thank you

  The following instructions will prepare photos
  with the EXIF Date/time stamp then you can print
  them.

  FastStone Image Viewer freeware can add
  EXIF Date/time in the face of your photos in a batch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm
  (Windows XP / Vista / 7)

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  After FastStone is downloaded and installed...
  Open the program and go...

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)
  (the text size will need to be adjusted according to the)
  the size of the photos)

  Open the window drop... "Insert a Variable."
  choose... EXIF Date Time / Date and time...
  (in the white field you should see ($H1)
  Left click... Ok

  On the Batch tab convert... in the left field...
  Left click the square button "select the Source folder.
  Find and select the photos you want to
  Add.

  Left, click on the Add button to move the files to
  the right field.

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  It's much easier to do than to explain then
  give it a try before say you "Good Grief... it's too
  a lot of work.

• on the time stamp

  Hi guys
  
  I have a table and the date in a column value is stored in varchar2 (35)
  
  It is stored to take time up to milliseconds as below
  
  
  Select transaction_date in the table
  
  12:43:04:651 09/09/2009
  
  now, I want to vatchar2 convert timestamp data type in my table
  
  to keep the data in the sound and start with the exception of the new data according to the timestamp data type
  
  I don't know why the previous developers took varchar instead of timestamp
  
  our production server is in the United States and the data entered through the India and business also
  
  So they used the varchar data type to store the milliseconds
  Use a procedure to have time ist
  
  now I can change the timestamp data type without affecting the data
  
  I think that its really need and it is not good to store the date in varchar
  
  the procedure I know to change the data type is as below
  
  
  1. Create Table smsrec_dup as select Rowid Row_Id, transaction_date sms_rec;
  
  
  2 update sms_rec Set transaction_date = Null;
  
  
  3.commit;
  
  
  4 Alter Table sms_rec change transaction_date timestamp (3);
  
  
  5 setting a day sms_rec B Set transaction_date = (Select transaction_date of smsrec_dup A where B.Rowid = A.Row_Id);
  
  
  6.commit;
  
  
  above to change the data of TIMESTAMP type
  
  NOW, I WANT TO HOW COULD I INSERT TIME IST
  
  CURRENTLY developers use a procedure for STI
  
  AS
  
  CREATE OR REPLACE PROCEDURE current_tstamp (real out varchar2)
  AS
  var_sign varchar2 (2);
  var_zone varchar2 (35);
  time TIMESTAMP;
  
  BEGIN
  
  Select substr (systimestamp, 30.1), to_char (systimestamp, 'tzr') in var_sign, double var_zone;
  
  IF var_sign = "+" THEN
  
  IF var_zone = "+ 05:30 ' THEN"
  
  SELECT to_char (systimestamp, ' dd/mm/yyyy hh24:mi:ss:ff3 "") in the double real;
  dbms_output.put_line (actual);
  
  ON THE OTHER
  
  Select to_char (systimestamp + (1/1440 * (330-(to_number (substr (systimestamp, 31,2)) * 60 +))))
  TO_NUMBER (substr (systimestamp, 34.2))), "dd/mm/yyyy hh24:mi:ss")
  ||':'||
  TO_CHAR (systimestamp, 'ff3'),
  SYSTIMESTAMP
  real-time,.
  Double;
  
  dbms_output.put_line (actual);
  
  END IF;
  
  ON THE OTHER
  
  Select
  to_char(SYSTIMESTAMP +)
  (1/1440 *)
  (to_number (substr (systimestamp, 31.2)) * 60 +)
  TO_NUMBER (substr (systimestamp, 34.2)) + 330)), "dd/mm/yyyy hh24:mi:ss")
  ||':'||
  TO_CHAR (systimestamp, 'ff3'),
  SYSTIMESTAMP
  real-time,.
  Double;
  
  dbms_output.put_line (actual);
  
  END IF;
  
  END;
  /
  
  
  and to call that trigger in
  
  as
  CREATE OR REPLACE TRIGGER 'TEST'.trg_tctn_dtinsrt_sms
  BEFORE INSERT ON sms_received
  FOR EACH LINE
  DECLARE
  VARCHAR2 (55) DT;
  BEGIN
  current_tstamp (DT);
  : new.transaction_date: = DT;
  END;

  Hello

  I just want to explain about this a bit...

  change time zone at the database level is quite a bad idea...
  because if you change the time zone then what about all the data that might be present in the same database used by other applications, as appropriate.
  I'm not sure, but if dbtimezone is changed so if you have date or timestamp columns with tables so the values inside of get them adjusted to the time zone has changed.

  first of all understand the diff between...

  If you use systimestamp (which is not really a timestamp data type appear perfectly what timestamp with time zone) must always dbtimezone time zone (as obtained from timezone database).

  You use localtimestamp (which is a timestamp data type) if the timestamp at the session that you set for him. by default, it will take the client's time zone.

  If you use current_timestamp (which is a local timestamp with time zone data type), we have to the time stamp and the time zone at the session that you define for him...

  SQL> alter session set time_zone='+05:30'
    2  ;
  
  Session altered.
  
  SQL>  select systimestamp,current_timestamp,localtimestamp from dual;
  
  SYSTIMESTAMP
  ---------------------------------------------------------------------------
  CURRENT_TIMESTAMP
  ---------------------------------------------------------------------------
  LOCALTIMESTAMP
  ---------------------------------------------------------------------------
  10-SEP-09 05.15.03.531687 AM -04:00
  10-SEP-09 02.45.03.531716 PM +05:30
  10-SEP-09 02.45.03.531716 PM
  
  SQL> alter session set time_zone='+04:30';
  
  Session altered.
  
  SQL> select systimestamp,current_timestamp,localtimestamp from dual;
  
  SYSTIMESTAMP
  ---------------------------------------------------------------------------
  CURRENT_TIMESTAMP
  ---------------------------------------------------------------------------
  LOCALTIMESTAMP
  ---------------------------------------------------------------------------
  10-SEP-09 05.15.39.840319 AM -04:00
  10-SEP-09 01.45.39.840350 PM +04:30
  10-SEP-09 01.45.39.840350 PM
  

  See above see you systimestamp does not change but current_timestamp and localtimestamp change with session timestamp...

  Until this is localtimestamp... speak frankly... it will get the time stamp of the client... If you use a sql developer then it will show the timestamp on your desktop... But in a 3-tier application... I mean applicationlayer-customer data base, the database client is application layer not the end user PC. He will get the time zone of the server application. So using timestamp with local time zone can be waived if you use 2-tier application or desktop.

  Here's the real story...
  So what I mean is that... This is the application layer send the time zone of the client to the database... If the database when inserting (indirectly, your willingness to insert queries) convert the timestamp to whatever you want...

  for example...
  I am inserting a record into the database table that has a timestamp data type... so... I inserted at 14:56 IST

  SQL> insert into test_tz(col1) values(systimestamp);
  
  1 row created.
  
  SQL> select col1 from test_tz;
  
  COL1
  ---------------------------------------------------------------------------
  10-SEP-09 05.25.41.497759 AM
  
  SQL> 
  

  If you see he showed he showed the time server by deleting the part of zone. Since then, you would like to insert in the TSI data then...

  SQL> truncate table test_Tz;
  
  Table truncated.
  
  SQL>  insert into test_tz(col1) values(systimestamp at time zone 'Asia/Calcutta');
  
  1 row created.
  
  SQL> select col1 from test_tz;
  
  COL1
  ---------------------------------------------------------------------------
  10-SEP-09 02.59.57.087032 PM
  

  He showed the real time of the insert as IST.

  .....................................
  If you want to set the level of the session then you must use localtimestamp as you used in your post...

  But regardless of how you use... you must spend the time zone of the client to the server, I mean 5:30 ' or "Asia/Calcutta" whatever inside your sql queries.

  Ravi Kumar

• You can change the size of the the time display on the lock screen?

  The time stamp on the lock screen always interferes with my pictures... is there a way to reduce the size?

  N °

• Date and time stamp not updated

  Following my previous posts, the date and time stamp of the files updated don't are not updated in the RoboSource Control, i.e. the column changed in the Explorer RoboSource Control. However, it seems that changes are stored on the server when the topics are archived, as I can right-click a file to source code control that I've changed, choose the command view and see the changes in the HTML code.

  Basically, this means that source code control is not recognizing that the files have changed and that's why when someone is trying to get the last version he thinks he's one because the date and time are the same as the previous version.

  Everyone knows this behavior before or know why the modified column suddenly stopped updating?

  Thank you

  Jonathan

  After a few Google searches of the digging and random, the following article seems to have solved my problem.

  It seems that if you run RoboSource Control on 64-bit computers, there are problems with checking in files.

  http://helpx.adobe.com/robohelp/kb/cant-check-files-robosource-control.html.

• Script Automator for the DATE and TIME stamped record

  Hi all

  I'm not a scripter, but are in need of a DATE and time-STAMPED folder (or file) I would like to put on my desktop and have updated automatically so that I can use this tool to quickly see if a backup external (or internal) is current. probably I could also use it to quickly find out how /old/ a backup is.

  for now, I do this manually if I want to quickly verify that a backup works by creating a "date named folder" on the desktop - such as '-2016 03 26 "."» so I can quickly see if a backup I just ran ran.

  I have a lot of backups (internal, external, off site, etc.) and it would be super useful for me to have.

  I consider the name of the folder to be customizable (potentially) in case I need to change it, but a good default would be "-YEAR MONTH DAY" so that I could see easily when this backup has been but also I name my files in this way so they can appear in chronological order "."

  is anyone able to help me with something like that or suggest another forum for cross-post this?

  Thank you

  Jon

  Hello

  Create the the ""new folder " action, like this:"

  

  ---------------

  Drag and drop the 'Shell Script' variable in the "name:" field.

  

  --------------

  Double click on the variable in the "name:" field:

  Copy and paste this text in the field 'Script ':

  date "+%Y %m %d"
  

• How to synchronize the start time in the waveform graph

  Hi all

  I just find a solution in the forum to select the data you want in a grap of waveform with cursors, however, I don't know how to synchronize the time of beginning of waveform for the second graph. How can I extract start time of the waveform with the index data?

  

  Something like that?  It is a bit gross, but is what I think you're asking, should be able to use it as a starting point.

  

  The Max - Min is to make sure that the cursor is always valid.

• seconds of falling for the time stamp

  I guess someone has had this problem before, but do not see in the forum anywhere.  I add a timestamp in a file so I used the 'get time in seconds' and connected to a "convert to DBL.  Then this son in an indicator on the façade and in the Express VI "write to a measurement file.

  The indicator shows the time stamp very well, but in the file it puts it in scientific notation and cut the last 4 digits and fractions of a second.  Timestamping writes to the file every 5 seconds, so it is important to have the rest of the time stamp included.  I tried using probes on wires to see where things are weird but I get the same value truncated in the wire before and after the flag.  I thought it had something to do with the VI Express first, given that the indicator is fine, but with her truncated in the thread, it seems that the Express VI is indeed record exactly what is given to... but then again the indicator... you can see that I've been running in circles in this!  Someone knows the reason why he does this and a possible solution?

  Thank you very much!

  
  

• Rough terrain when the data is plotted with time stamp of AM / PM or to the right!

  Hi to all programmers.

  I'm attached Datafile. Can someone tell me how to draw this line! I need all of the data plotted on the right and the x - axis with the date and time stamp.

  I understand that the chart cannot understand that after the time: 12:59:59.999, it's 01:00:00.000 afternoon.

  Thanks to Labview 7.1

  Concerning

  HFZ

  Apart from a code that can be simplified by the use of other functions, what I see, it's that the file you provided does not match the format that expects the VI.

  Other comments:

  • I don't understand why you're going to all the trouble of the evolution of the time string when all what you need to do is:

    

  • All the way at the beginning, use the function of path of the band to get the file name rather than the gymnastics that you're doing.
  • Your time loop must be indexed for auto-loop.
  • I can't quite understand what you're trying to do with all these sliders.