Yoga 2 Pro - wake up sleep cause

Similar Questions

• Surface Pro wake from sleep

  I have a brand new Surface Pro with cover Type.  If I allow him to go to sleep, either by closing the lid or leave it empty, he's not waking up.  I experience the problem even if the device is plugged in or not.  It happens also with and without covering type.

  In order to get the Surface Pro to come back, I have to turn it off completely by holding down the power button.  Then he starts back and complain that a problem with Windows close unexpectedly.  Other that update applications 'Modern' in construction, Office 2013 and Microsoft Updates installation, no other changes have been made to the unit.  The device worked properly for about 2 days after the initial Setup, then this problem started to happen.

  Has anyone else seen this problem and find a resolution?

  I had exactly this problem on a 3 Surface Pro running Windows 10 build 10041. Has been fully reproducible. Close cover keyboard to release SP3 in mode 'sleep' and then it was impossible to wakes again. Windows button vibrated in a hurry but other than SP3 do not wake up. I tried everything, ranging from disable sleep mode connected to the power switch, Hibernate, turn but the problem remains. Very annoying.

  What solved it for me was to install the driver of Surface Pro 3 pack. You only need the Surface Pro pack driver 3 March 2015 (~ 150 MB) here: https://www.microsoft.com/en-us/download/details.aspx?id=38826

  After installing this pack my SP3 wakes up from sleep again. Hope this helps some.

• JO 8600 Pro wake from sleep mode.

  works great all tasks as long as he is unable to sleep. Must unplug and plug in again once it goes into mode 'sleep'. uninstalled and re-installed from cd and redownloaded updated. no change

  last 3 mos extended warranty. 9 k copy perfect machine of 2 1/4 years and product until this problem developed. Built in obsilesence?

  My ' don't wake up the problem has been resolved! Any suggestions on the support forum is used to verify that all the settings were exactly as they should be and verified that the problem existed in the fact that I was trying to run the printer off of a mobile access point. The signal from the MiFi device was apparently in conflict with the signal wireless to the printer (Greek to me).

  Technical support had me turn on the wireless directly on the printer and after some specific steps in this process my printer refuses is no longer wake on demand and all three of my computers communicate seamless, wireless and week + chaos in my household created by my goal tirelessly on getting my printer works perfectly once again back to calm. 24 hours and counting, Yes!

  There are answers. Do not give up. I hope that you will find yours even if you still have some hair left.

  This post as SOLVED! but not by the steps described in the response to my post.

• Yoga 2 Pro mode 'sleep'

  I have a Yoga Pro 2. I7, 512 GB hard drive (the more expensive one).

  The computer will not wake from sleep mode. I tried to change sleep settings. I have updated all drivers (this laptop is less than 2 weeks). If I use the settings on the laptop or if I close the lid, it goes into mode "Eve". But Nothiong I do not short-circuit to perform a hard reboot will bring if sleep. Anyone have any suggestions to solve this problem.

  Thank you.

  So I just updated the non-essential microsoft updates, and "sleep" mode seems to work again... If anyone has this problem try this to see if help.

• Yoga 2 Pro - sleep setting missing after upgrade to Windows 10 RTM

  Here's another interesting event. I use sleep mode all the time, that's what happens "when I close the lid. After upgrade Windows 8.1 for Windows 10 RTM, "standby mode" is not found. "when I close the lid" and related parameters in power management have an empty selection, sleep does not appear in the drop-down list of choices. It seems revenue to "Put to sleep" by default. By reading the other Windows 10 forums I know sleep is supported in Windows 10, how can I get that back? I tried to download and install the latest driver for power management (as dated 17/07/2015, I think) but I get the message that "you already have a newer version of the driver installed", I cancelled out of the facility. Are there newer drivers planned for soon? I can shoot with Microsoft Basic Display Driver (3200 x 1800 only, see my other ad in the forum), although I used a different resolution in Windows 8.1 and hibernate instead of mode 'sleep', but I hope that these features will work soon. Thank you, Bob

  * Sleep is back * after having solved my problem of graphics driver. Fixed. See the thread «driver Intel HD graphics on Yoga 2 Pro fail after...» "for more details. Cheers, Bob

• Yoga 2 Pro advertising plays when the computer goes to sleep

  Hello, so I recently bought a Yoga 2 Pro and have almost no complaints. One small thing I noticed is that my computer from time to time upon entering the mode "ensure" with the lid open, instead of displaying a black screen as planned will instead show an advertisement stating "4 NEW MODES, LENOVO YOGA 2 PRO" and will begin to show a video advetisment.

  I would rather the computer make a traditonal sleep mode when the lid is left open, how can I disable this advertising? I tried to play with the sleep settings in windows, but not luck. This occurs when both on battery and plugged in. I also tried to uninstall the software of Lenovo's Transition, but that did not help. Any ideas? It seems that the computer may be in demo mode? Thanks for the help.

  Good afternoon and welcome to the community.

  This is the default screensaver.

  To change it, right-click on the desktop, select Customize, then select the screen saver at the bottom right. You can then make changes in the window that appears.

  I hope this helps.

• Satellite Pro P300-276: Win 7 intermittently wake mode 'sleep'

  Hey,.

  After an upgrade from Vista to Windows 7, my laptop has been intermittently summer wake up sleep mode.
  It is not entirely boot or show anything on the screen, and after 10-15 seconds will return to the sleep mode.
  All the network devices were not set to wake up the laptop on the activity.

  Any ideas?

  Thank you very much.

  Hello

  Have you disabled wake up LAN in the BIOS? In addition, you must also disable USB Sleep & Charge and wake up keyboard.

  Check your BIOS for these options and disable them. For me, it worked! :)

• Yoga 2 Pro - keyboard is not activated when you open the lid of the screen after sleep

  My Yoga 2 Pro has very often problems to activate the keyboard when I open the screen.

  That's what I do:

  -work with Yoga 2 Pro

  -Close all applications and after that, I close the screen

  -After some time (maybe a few minutes or several hours) I open the screen

  -It will take a few seconds until the screen is turned on (which is expected)

  -at least 50%, the rest keyboard disabled. The backlight cannot be activated and the laptop does not notice any key. I'm unable to log :-(

  -J' I need to close the screen, it takes a few seconds - and when I open the screen for the second time, the keyboard is enabled - not always, but usually. But sometimes the keypad remains disabled, although I try the procedure several times. If that happens, I need to restart the machine.

  All the drivers are up to date.

  @Lenovo: Please indicate how to solve this problem! It's very annoying open-close-open-close-open-... the display up to what the keyboard is finally activated!

  Kind regards

  Oliver

  http://download.Lenovo.com/Consumer/mobiles/transit136w81.exe
  Transition of Lenovo 2.0 for Windows (32-bit, 64-bit) 8.1 - Lenovo Yoga 2 Pro

• Yoga 900 wake from sleep

  Hello

  My 900 Yoga has awakened from his sleep in my backpack many times. I tried to find a setting to disable the keyboard while the computer is in sleep, but I couldn't find one. I asked support about this problem and they are not too a solution. I asked the agent I spoke with to pass along my request to the technical department and he agreed to do. Is it possible for me to solve this problem?

  
  

• Compressed Yoga 2 Pro is stuck in Mode safe

  Hey my compressed Yoga 2 Pro is blocked in safe mode, what can I do? Decrease the volume does not work.

  Note from the admin; subject published to better represent the topic.

  Lenovo has integrated a solution for customers of declaration that the volume button is stuck on devices compressed Yoga 2 Pro, causing the tablet to start in safe mode, rather than start as expected.

  If your device is guaranteed and facing this problem, please contact support Lenovo Service and Service TIP E23/HT102847 of reference.

  Thank you

• Yoga 3 Pro: speaker stopped working (headphone jack still works)

  Recently bought Yoga 3 Pro (Windows 8.1) the Lenovo Web site (2 months ago).

  The speaker worked fine until yesterday. All of a sudden, the speaker stopped working, after I used the headset.

  Now, only the helmet works and no sound can get out of the enclosure.

  I updated the driver from RealTek speaker to a new version 9/2014. It did not help.

  Does anyone have an idea on what could be the cause and how to fix it?

  Thank you!

  My problem has been resolved to back the audio driver (which has been updated
  through Windows Update automatically) to the factory default. The speaker
  works again once the default driver has been reinstalled.

  Now, one thing to note is that you must also disable the automatic
  "update driver in" System Properties "==>"Material"==>"Device"tab
  Installation settings"==> no, select"Let me choose what to do"==> and
  Then select "never install driver from Windows Update." and ensure
  "Automatically obtain the device app and info provided by your device.
  Reference the manufacturer"is checked. This will not prevent the driver gets automatically
  modified by Windows Update after your next reboot.

  I hope this helps fix your situation also.

  BTW, the likelihood of a material defect (speaker) is very very low...

  Good luck!

• Yoga 2 Pro - cursor flashes when moving on some programs

  I have a Yoga 2 Pro with Windows 10. Some programs (for example Thunderbird, LibreOffice), the cursor flashes when moving on the program window. I made sure my screen and touchpad drivers are up to date as well as the BIOS of my laptop. What else could be the cause? It's a bit irritating.

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Went before and refreshed; things seem to work fine now. I guess the moral is 'don't do an upgrade directly from Windows 8.1 to 10'.

• Acrobat XI very slow on Yoga 3 Pro

  I noticed that Adobe Acrobat XI is very slow on the Yoga 3 Pro. More precisely lag when zooming in and out, panning, scrolling and fullscreen. This is particularly evident with full screen and quite annoying in tablet mode. However, with the same files PDF using the Microsoft Reader application does NOT have this delay.

  What I then discovered is that this has something to do with the Core M processor and get its limited power. If you change the power plan in OneKey high performance optimizer (from symmetrical, for example), Acrobat becomes suddenly quite catchy.

  Mode Tablet, if you just want to read a PDF file (and use Acrobat), you need not 'high performance', in order to extend unfortunately bad Yoga 3 Pro, you want to put in balanced or Power Saver - that should still be enough to read PDF files, but it is not the case with Acrobat XI unfortunately.

  I don't know what CPU limiting, of the power management feature is causing this issue in Acrobat, but I thought I would post this because I couldn't find anything on the internet about this issue.

  Yes, the CPU is a bit of a brake on the Y3P and Acrobat is not the lightest suite. Although in principle, balanced expected clock upwards at full speed under load.

  Have you checked the minimum/maximum values of CPU on the profile balanced in the Advanced Power Options?

  I'm also a fan of reading with SumatraPDF; It relies on the muPDF Super light and super fast to make PDF files, but does not support the PDF editing features or fanciful as forms.

• Yoga 2 Pro: iPad 4 will not load on all USB ports

  Hey

  Just got a Y2P a week ago and always try to understand all the ins and outs.

  Current issue: I plug my iPad 4 to one of the two ports USB, but both ports cause the iPad to say "Do not load"

  USB ports on this low powered computer? or y at - there a setting im missing somewhere... ?

  Energy Manager a loading USB enabled for the mode in which I am

  Thank you!

  the usb port on the Yoga 2 Pro iPad will trickle charge, usually during the night, it will charge about 40% of the total battery.

• Yoga 2 Pro stutters when you play videos

  Hey guys,.

  I was wondering if anyone else has this probem stuttering when I look at videons on the yoga 2 pro? I configuring i5/256/8 GB of ram, but really, watch videos should not be a problem for the configuration even lower?

  Any help would be appreciated.

  It was just a normal 480 resolution on youtube video. He had nothing to do with the settings manager energy wasn't endurance mode, cause I just use my laptop under normal parameters. Actually, I found another thread where the guy had the same problem, and fixed it by increasing the size of virtual memory file / page. I followed his instructions, and it seemed to have done the trick. Interestingly, the virtual memory is supposed to be 1 or 1.5 times your ram, but my virtual memory file size / page is only 1 GB from my 8gbs of ram. Maybe it has something to do with the lozenges of limitation, who knows! The solution/thread I found is here: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Pro-HD-playback-freezes-other-appl... I hope this helps someone out there.