timer before the next frame help

Similar Questions

• video in a frame, the video clip of hole to play before the next frame whant

  I know that I can write:
  
  on exitFrame me
  go to the section
  end
  
  but I want him to go next frame when hole video clip is played. jargon for the maneuver to that frame when he played the video.
  
  I am whant to jargon of wright:
  
  On exitFrame me
  hold the framework for X seconds
  end
  
  ore something that make the frame to hold for as long I want it.

  Thanks, nice work

• the screen is black at startup, I have to turn off many times before the lites screen upward

  screen is dark at the start until I have to turn off several times before the lites screen upward.

  [Moved from comments]

  Hi Ken,

  It would be more useful if you answer these questions.

  1 Windows operating system you are using?

  2. What is the brand and model of the computer?

  3. were there any hardware or software changes on the computer?

  If you use Windows 7, then follow the article provided to fix black screen at startup issue.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

  Thanks vikrant I used scannow and it fixed my problem of registry. I have windows 7. Click Start type command RT. Click on the cmd icon, click on run as administrator, black screen should appear. type sfc/scannow press ENTER.

• How to get the phone to ring several times before the voicemail picks up

  Is there a setting to let the phone ring several times before the voicemail picks up

  This option will be controlled by your wireless operator. Contact them to determine whether it is possible to change the response time of voicemail.

• How to set the amount of time before the screen turns off during the slow activity

  Adjust the idle time before the screen saver stops

  Right click on the desktop | Customize | Screen saver | Change the power settings.
   

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• Length of look at a time before the computer switches mode "Eve"

  original title: length of time to listen.

  My question is very similar to Marmota2, except that I do it only 2 minutes before I lose Visual but not to the screen saver, he falls asleep! It is a very recent problem. What is going on?

  Hello

  
  You did changes to the computer before the show?

  Method 1:
  You can increase the time to turn off the display and put the computer to sleep in power options.
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management
  
  Method 2:
  You can try to change the power management and check if that helps. For more information on power management, follow the link below.
  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  See also the link for help:
  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

• NDP project - Check for a field before the next the workflow status

  Hello

  Is it possible to have a similar feature as the conditions of custody (for GSM, SCRM) in a NDP project?.

  I need to check the value of a field before moving on to the next step. I know that there may be some validations customized when you save the project, but I would like to know if it is possible to check the value of a field before moving to the State / the next step.

  Thanks in advance,

  Fernando

  Hi Fernando,

  We support validation on the events of Workflow in a NDP project. If you have installed the pack of the EP, go to \ReferenceImplementations\Validation\Documentation\Validation Objects.xls, you will see a detailed list of events, type ID and so on.

  I don't know what validation you want to put in place, here, I have an example you can make reference to:

  1, add the following to Config\Extensions\ValidationSettings.xml:

  2, restart the iis services

  3, go to one project NDP, erase the data in field of brands, save the project, no error

  workflow 4, this project, error "property marks is required."

  '

  I hope this helps.

  Thank you

  Jessie

• Last image remains in display panal until the next frame starts.

  For some reason any every time I cut a clip and follow it with an empty space of the last frame of the clip remains in the panal display, even if the clip is finished. This isn't a problem when I go to the clip, empty space is represented until the next clip begins. It is in audio synchronization for the right frame up a nightmare. Any suggestions?

  Welcome to the forum.

  Rather than leave a gap in the video, what happens if you insert black Video (created with the new icon in the project Panel)?

  Note that deviations may cause all sorts of issues later, while there are not recommended.

  Good luck

  Hunt

• y at - it that results in a fix for kb2582282 calculate wrong time of the next run of the SQL Scheduler

  After the installation of KB2582282, all timed SSRS 2008 subscription get the next bad performance calculated by the Scheduler SQL 2008.  Is there any solution for this?  I am running SSRS 2008 x 64 and SQL 2008 x 64 sp1.  NO R2.  After uninstalling the hotfix rollup16 for SQL, Scheduler calculates the next run correctly times again.

  Hello

  As the question you posted is related to Microsoft servers, I suggest you to ask your question to

  Microsoft MSDN

  SQL Server Reporting Services

  http://social.msdn.Microsoft.com/forums/en-AU/sqlreportingservices/threads

• Life time before the computor makes me log in again?

  How to set the time until the computor makes me log in again?

  Try these:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/configure-power-management

  http://support.Microsoft.com/kb/314493

• URGENT: Need to flashback table, how to find SNA for quite some time before the update that's happened?

  Hi all

  I have a new database 11G, I haven't used before flashback, but my retention time is a day... I have once the developer did a massive update to a table to corrupt.

  How can I find the RCS for this time so I can try this table of flashback?

  Thank you

  Cayenne

  Thank you.. I also found that it works:

  SQL > select timestamp_to_scn (to_timestamp('20140103152000','YYYYMMDDHH24MISS')) SNA double;

  SNA

  ----------

  98344246

  Although does NOT work all the time. But that's just what Oracle when you give him a timestamp to flashback to: it converts the timestamp of a SNA and then restores the data based on the SNA.

  See table of Flashback in the language SQL doc

  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9012.htm

  TIMESTAMP CLAUSE

  Specify a value of timestamp corresponding to the point in time to which you want to return to the table. The expr must evaluate to a valid time stamp in the past. The table will flash back to a period of about 3 seconds to the specified timestamp.

  This precision "3 seconds" is because of this conversion to SNA - Oracle uses its internal table.

  YVERT is accurate, if you know, but you typically do not have.

  Read and consider these warnings in app dev guide advanced

  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28424/adfns_flashback.htm

  Guidelines for Oracle Flashback Query

  • If a potential error of 3 seconds (maximum) is important for Oracle Flashback Query in your application, use a SNA instead of a timestamp. See guidelines on Oracle Flashback technology.

  . . .

  General guidelines for Oracle Flashback Table

  . . .

  • For querying the latest data at a specific time, use a SNA. If you use a timestamp, questioned real time can be up to 3 seconds before the time you specify. Oracle database uses the SNA and assigns them to the timestamps to a granularity of 3 seconds.

  For example, suppose values SNA 1000 and 1005 are mapped on the timestamps 08:41 and 08:46, respectively. A query for a moment between 08:41 and 08:45:59 is mapped to the SCN 1000; an Oracle Flashback Query at 08:46 is mapped to the SNA 1005.

  By reason of this time-to-SNA map, if you specify a time slightly after a DDL (such as a table creation) Oracle database operation can use a SNA which is located just before the DDL operation, causing the error ORA-1466.

  . . .

• The time on the taskbar is passed to 3 hours earlier... it's show time for the Pacific. Help!

  What happened one day after I told my new e-mail (eM Client) client that my listings at that time had been arrested. They are at the time of the Pacific. Maybe this has something to do with it? It's just a matter of resestting the clock on my taskbar, I think.

  The taskbar is part of Windows, it has nothing to do with Firefox.

  See this: http://windows.microsoft.com/en-us/windows/set-clock#1TC=windows-7

• Image gallery. How to click on the image to go to the next frame?

  Flex 4, flash builder 4.6.

  This gallery has a line of numbers. When you click on a number, a photo appears above. Each number represents a picture of "Data.xml". Works well. Now, I want to click a photo that is already displayed and cause the next picture in the series to display. How can I do this? Thank you.

  < s:Application creationComplete = "service.send ()" >

  < fx:Declarations >

  < s:HTTPService id = "service" url = "data.xml" result ="serviceHandler (event)" > < / s:HTTPService > "

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  Import mx.collections.ArrayCollection;

  Import mx.rpc.events.ResultEvent;

  [Bindable]

  private var image collection: ArrayCollection;

  private void serviceHandler(event:ResultEvent):void {}

  images = event.result.gallery.image;

  }

  []] >

  < / fx:Script >

  "{< s:Image source="assets/poster/{imagesList.selectedItem.pic} "/ >

  < s:List id = "imagesList" dataProvider = "{images}" >

  < s:itemRenderer >

  < fx:Component >

  < s:ItemRenderer >

  < s:Label text = "{data.number}" fontSize = "12" / > "

  < / s:ItemRenderer >

  < / fx:Component >

  < / s:itemRenderer >

  < / s:List >

  < / application >

  "Data.xml"

  < Gallery >

  < image >

  < number > 01 < / number >

  < pic > photo01.jpg < / pic >

  < / image >

  < image >

  < number > 02 < / number >

  < pic > photo02.jpg < / pic >

  < / image >

  < / Gallery >

  make actionscript.

  private function LstChangeHandler (): void

  {

  If (imagesList.SelectedItem)

  IMG.source = ' assets/poster / "+ imagesList.selectedItem.pic.toString ();

  }

  private void ImageClickHandler (): void

  {

  If (imagesLis.selectedIndex >-1 & imagesLis.selectedIndex)<>

  {

  imagesList.selectedIndex = imagesList.selectedIndex + 1;

  LstChangeHandler();

  }

  }

  I didn't test it, but it will work.

• Display the time of the next election

  Hello
  
  
  
  I have a poll that refreshes the data on a table every minute.
  How can I display the duration up to the following call to the listener survey?
  I use ADF 11 g (11.1.1.2 Jdev).
  
  Best regards
  Bostjan

  Hello

  You just need to change the logic, but the method remains the same. Yes, the survey doesn't store any value. But you still have ways to achieve this.

  For ex, the code below displays an account countdown (from 60 seconds) and updated every second.

  
  
    
    
      
        
            
            
            
            
             
            
            
            function updateText(event){
            event.cancel();
            var optxt = AdfPage.PAGE.findComponent("ot2" );
            var currCount = optxt.getValue()-1==0?60:optxt.getValue()-1;
            optxt.setValue(currCount);
  
            }
            
        
      
    
  
  

  So, in your case, you can have 2 polls, one for the updating of the table (with 1 min interval) and another for the updating of the timer (with the interval of 1 second).

  HTH.

  Arun-