Tip action: 'highlight' box appears with the "incorrect" box

Similar Questions

• whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem?

  whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem? someone help me please tell how to fix

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest you to try the steps below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• Point for the action Menu spacing: set an action item to appear in the menu of the action at the bottom?

  How do you define an action item to appear in the menu of the action at the bottom? As the point to delete shown here:

  https://developer.BlackBerry.com/Cascades/documentation/Getting_started/porting/mapping.html

  

  You would most likely want to start with https://developer.blackberry.com/cascades/reference/bb__cascades__deleteactionitem.html and discover the parent class.

  The text suggests that the title and icon appear in the standard only if you do not specify your own when you add the element, so there is hope, you can fake it.

• Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? Thank you

  Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug?

  When the same text is seen in another browser, it is displayed correctly as "two."

  The same question is displayed on another computer.

  Thank you.

  Sounds that you use a font that supports ligatures (Palatino?).

  • http://en.Wikipedia.org/wiki/Ligature_%28typography%29

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• HP Office Jet 5610 all in one does not appear with the fax

  I got a new computer with Windows 7 when I added my printer HP Office Jet 5610 all in one, it does not appear with the fax.  When I tried to install it with the disc from the printer, he Wouln't install.  What is the problem? I really need on the part of the printer fax.

  Hello

  Try this maybe this will help.

  -Type fax in the research - type on Windows and scan-new fax fax...

• I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages

  I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages.  When I click on 12 items, a screen will appear with a red install icon, I click and it askes for the serial number. It won't let me type in letters digits only. Already, I have the serial number once. How to make this work? I don't want to be a programmer!

  attach a screenshot of what appears after clicking PES 12, http://forums.adobe.com/thread/963429

• WebHelp TOC does not appear with the IE9 browser

  This is similar to the display is not in Chrome which I fixed. I use Robohelp 7 WebHelp TOC now does not appear with the IE9 browser.

  See you soon

  He solved.

  In whver.js

  Change of line 64} else if (gbIE4)

  TO

  } else if (gbIE55)

• Why a menu bar background box does not appear with the menu bar?

  I'm developing a site that includes a menu bar, which looks good after download - on a black background full width - which does not appear. When I view the site in the browser before you download everything right but when I download the site BC, the black box is visible as a small bar at the top. He was fine until the last day or two, when I upgraded to Muse. A picture showing the two versions is attached. Upper half is in British Colombia, the bottom of my browser. Any ideas? I'm displaying in Safari on a Mac and it can be consulted on the method

  

  Hi Paul,.

  If the elements that do not correctly appear on the master page, then please refer to this post: Re: new version of Muse certainly screwed things up

  Kind regards

  Akshay

• Tip action CP5 need help with conditions...

  Hello

  I created my own multiple question (MC) with 4 theeorie response which 3 are fair and 1 is wrong.

  As soon as a true/false response is checked, a tip action is performed - check mark in the box as shown and "feedback" to answer.

  In the case of a good answer - any previous response feedback is hidden, but the check box answers correct stay while evil answer checkmark is hidden.

  An example of the tip action for one of the three answers:

  

  This is what looks like the question until the answer to my question must be implemented:

  

  Now to my question:

  At the end of the responses, I would like to the user get a message: CONGRATULATIONS...

  This should appear when all 3 answers have been selected.

  After CONGRAT... message, they can then click on continue button to continue training.

  I'm curious to any suggestion on how to achieve this

  Thanks in advance for the answer.

  Best regards

  Stephanie

  OPTION A:

  The measures to achieve the congratulations message on the same Blade (which is the issue) 1. Actions such as B_Selected, C_Selected etc must be conditional actions instead of the standard actions, that they are at the moment.

  2. four variables must be created in project-> Variables-> add new. These can be called a, b, c, d and a value of 0 (zero), which means that the option is not selected 3. In the conditional action B_selected first requirement should be something like

  If (1 corresponds to 1)

  {

  See the TC_Correct_B

  See the Image_230

  Hide Image_233

  Hide TC_Wrong_A

  Hide TC_Correct_C

  Hide TC_Correct_D

  Assign b = 1

  }

  4. in the second step of the action itself i.e. B_selected, follow these steps

  If (a is 0 & b is equal to 1 & c equals 1 & d is equal to 1)

  See the TC_Congratulations

  All actions should have these two conditions and if there are actions such as B_unselect, then 'assign b = 0' in such actions.

  OPTION B

  On the other hand, if it is showing the message of congratulations on the next slide, it will be simpler as this 1. Create four variables a, b, c, and d = 0 2. In actions such as B_Selected (no need to change to conditional action), add a statement 'assign b = 1'.

  3. in the actions such as B_unselected, add a statement 'assign b = 0'.

  4. at the exit of the slide execute advanced action, which will be a conditional action as follows:

  If (a is 0 & b is equal to 1 & c equals 1 & d is equal to 1)

  Go to the next slide

  On the other

  Jump to slide _

  5. on the next slide write the message of congratulations.

  Kind regards

  Vautrin

• "Unknown popup window titled" information "appears with the message please wait a few moments.

  Original title: window unknown popup

  I'm under THAT XP SP 3 fully updated; Mozilla Firefox version 7.0.1 - I keep getting a small pop up window titled 'Information' with the message: Please wait a few moments. It has a small clock on the left side of the field. Only momentary and random. I ran Mcafee virus scan and webroot spyware with no prob on either. Is this some sort of spyware or what?

  Hello

  1. find this jump up while working on Mozilla Firefox?

  I suggest that you initialize in a clean boot state and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (d) when you are prompted, click on restart to restart the computer.

• Not able to open programs 'open with' appears with the message "choose the program you want to use to open this file."

  Original title: what is savagent.exe.

  I started having trouble opening all my programs...  A 'Open with' box appears only the message "choose the program you want to use to open this file: file: * .exe ', and I only have two choices, either Microsoft Office OneNoteQuick Launcher or Wordpad...  Since none of them are the program that I want, I click on the Cancel button, the popup disappears and the program does not open.  Internet Explorer is the only exception it opens when I click on Cancel.

  I am running Windows Vista on a Dell 1525.  I did a general online search, but the concflicts information too for me make sure my best option.

  Thanks for considering my question.

  Correct me if I misread your message.

  You said open with dialog box appears whenever you try to open a program?

  If so, try this...

  http://forums.techguy.org/Windows-Vista/899995-solved-Open-box-opens-every.html

  Scroll down to the answer given by Phantom010:
  Download and merge the reg. EXEFIX .

  quote...
  Try this registry fix: EXEFIX

  Unzip the patch and extract it. REG file on your desktop. Right click on the REG file and choose Merge. Note that you must be an administrator to apply this hotfix.

  Reset.

• Tip action DOES not work in the Flash output

  Hello

  I created a module in line with Captivate 9 using an advanced conditional action to display the button at the end of 2 sections.

  The trigger works well in the release of HTML5, but it does not work in the Flash output: users need to go back to the slide with the action advanced a second time in order to show the next button.

  It is the created tip action:

  

  Help, please. Thank you

  Lisa

  Change the order in the updated standard measure jump to slide as last order, or at least after the command of the increment.  The actions are executed in sequence, if you jump first to this slide, where the on enter event is executed, the variable has not yet been incremented. Try to see if it solves the problem. HTML is different from SWF to react (it is converted to JS so that SWF to ACE).

  You post the screenshot of the timeline.

  Moreover, as I have indicated already, I would add continue to the part of the TIME as well as the ELSE part. I learned that, in certain circumstances, a conditional action with that one decision, and no ELSE part does not work well. It is not a problem if you have several decisions.

• Toolbar does not appear with the exception of the small arrows to move to the bottom

  First Elements 8 running on Windows 7 - top of page organizing icon appear (small box containing small boxes) and then there is a space of several inches, them a small arrow to the right with a menu icon drop-down.  When I click on the arrow, there is menu drop-down with what seems to be the standard options (file, editing, etc.)

  How can I get the icon buttons to appear in the toolbar?

  http://www.johnrellis.com/psedbtool/Photoshop-elements-FAQ.htm#The_Organizers_Menu_Bar_doe snt_show