Title, title, line-Align multi-column Tables

Similar Questions

• White line how unwanted continuous table titles?

  I managed to use a white rectangle to hide the "BOLD" line junk above table titles except when the table continuation variable is used for the tables continued on a second page. All the world has discovered a work around?

  bold line unwanted above the table titles

  Assuming you are using the default table definitions, have you tried to update the TableTitle style? or decision in the table style properties?

  I do not use the definitions by default, though I've never seen a title with a line in bold above. Maybe you could put a picture.

• Add row in table or list multi-column

  Hello

  I discovered Labview (version 8.6) and I am trying to create a program of asquisition of data pour a shock absorber test bench.

  I collects the data and table classes in UN, AND cre a XY graph pour display a Representative force of the shock curve depending on the speed of movement of the stem. Until there all right!

  My problem is that I want that when the cycle is done en continue, new data appears on the next line instead of "crush the Report values as is currently the case. I tried with the tool 'table' and the 'multi-column list' tool but the problem is the same: How do I do?

  It happens that I have the same problem to display the curves on my XY graph, I also need help pay this problem.

  Please pour your attention and your help.

  Kind regards

  Jeremy

  PS: If my spouse VI to image the problem.

  Hello Jeremy,

  First of all, I would like to know what you mean by en run continue? If you specify normal here the double arrow d "performance, I would like to inform you that it must be used only when debugging your application, pour allow you to change values on orders without having to continually again l ' execution of your vi.

  If you want that your program runs continuously, you can add a loop around your code, with a STOP button for example to stop it.

  Then, if you get to write a single line, it is because although you creating a table 2D of your data before sending it to the node of the list property, this table is filled by a single column.

  You will find attached your slightly modified VI pour integrate a loop at the level of the acquisition.

  I used a tunnel with auto-indexation, which allows you to create a new row in the table 2D at each iteration of the loop. It's a simple way, but is not particularly the best, you can also set up your creations of table functions in the loop. In the same way, it will take maybe add functions of timing in the loop, but in your case, I think that the acquisition it even cadencera the execution of the loop.

  The report will be completed once you have clicked the STOP button.

  This solution of hoping to match your need.

  Kind regards

• What is the title of the NOTE column in Windows Explorer?

  What is the title of the NOTE column in Windows Explorer?
  Am using Vista Home Premium, I understand that there are 6 models folder in Vista Type; photography and videos and music details templates have the column nominal position, (1) what is it for, (2) can I use it for photos of rates or documents, if so how?

  Hi 5466,

  Thanks for your replies.

  Vista has characteristics of property for files in folders that you might be able to carry out some sort of system that allows you to know your staff for the file that you place in the folder.

  There isn't a download from Microsoft which has the attribute that you speak of to allow the classification of Word documents.  Information online about this process does not specifically address the attribute you have written in to place the dimension on the record.

  Here is a possible work around you

  When you view them documents in the folder, they are placed, check Details of the menu view is marked.

  Then in the file that is created, right click and select Properties, in the TAG field type a general comment as '5 stars' or one who would submit to you the rating desired - in this field of the Details tab of the properties as Judd had suggested in a previous post.   You can use this field to record the files you have chosen personally.

  Of course it's all a work around, but please let us know if this helps you.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way to get a list of tables with multi-column primary keys?

  I have a model over 1000 tables, each containing primary and some keys with unique indexes.  I need a list of multi-column primary keys and a list of the unique indexes that are not the primary key.  Is there a way this information easily?

  I have a generator that creates the merge instructions and I needed a way to retrieve the PK, if any, UK and otherwise the first Unique Index.  This comes from a cursor, so there are some variables for the schema and the name of the table and a constant for pk 'P' and 'U '.

  -- Primary/Unique Key
  SELECT   *
  FROM     dba_cons_columns concol, dba_constraints con
  WHERE    concol.owner = UPPER ( pv_schema )
  AND      concol.table_name = UPPER ( pv_table_name )
  AND      ( con.constraint_type = const.v_constraint_primary
  OR        ( con.constraint_type = const.v_constraint_unique
  AND        NOT EXISTS
               (SELECT NULL
                FROM   dba_constraints conx
                WHERE  conx.constraint_type = const.v_constraint_primary
                AND    conx.owner = con.owner
                AND    conx.table_name = con.table_name
                AND    conx.constraint_name = con.constraint_name) ) )
  AND      concol.owner = con.owner
  AND      concol.table_name = con.table_name
  AND      concol.constraint_name = con.constraint_name;
  
  -- Unique Index
  SELECT *
  FROM   dba_ind_columns indcol,
         (SELECT   indcol.table_owner,
                   indcol.table_name,
                   indcol.index_owner,
                   MIN ( indcol.index_name ) min_index_name
          FROM     dba_ind_columns indcol, dba_indexes ind
          WHERE    ind.index_type = 'NORMAL'
          AND      ind.uniqueness = 'UNIQUE'
          AND      indcol.table_owner = UPPER ( pv_schema )
          AND      indcol.table_name = UPPER ( pv_table_name )
          AND      indcol.table_owner = ind.table_owner
          AND      indcol.table_name = ind.table_name
          AND      indcol.index_owner = ind.owner
          AND      indcol.index_owner = indcol.table_owner
          AND      indcol.index_name = ind.index_name
          GROUP BY indcol.table_owner,
                   indcol.table_name,
                   indcol.index_owner) ind
  WHERE  indcol.table_owner = ind.table_owner
  AND    indcol.table_name = ind.table_name
  AND    indcol.index_owner = ind.index_owner
  AND    indcol.index_name = ind.min_index_name;
  

• Presentation of the bulletin, by aligning the columns, paragraph breaks, and lines of text

  Hello

  I've never drawn a newsletter before.

  It's annoying me because I try to be as meticulous as possible with my alignment, but I noticed there are all things that don't align.

  I have a paragraph style, with a space before and after. I have three columns. When I look at a line of text across all columns of three, they are not aligned. May they line up if I had all the text directly and no image wraps, but the envelopes of the image and the beginning of a new paragraph in column 2, throws the alignment in column 3.

  What is the best way to align things with the least possible effort?

  Are there tutorials on good bulletin of the layout-design? Presentation of the grid?

  Thank you

  Stan

  Learn about the starting grids.

  Bob

• Is there a way to select lines or separate columns in the tables?

  This seems to be something very simple, but does not seem to Indesign (I currently use CS4) to facilitate the selection of rows or columns that are not side by side.

  Usually, something like this is done with a modifier key, for example now control and selecting each desired line/column/cell is selected.

  Even if there is a script or command or something which selects every second row/column, that would be enough.

  Most of these things are too specific to be included as a feature (in fact, I would include alternating fills row/column to this as well), but are easily scriptable.

  This fast javascript seems to do what you want:

  firstRowToChange = 1;
  table = app.selection[0];
  if (table.hasOwnProperty("baseline"))
   table = table.parent;
  if (table instanceof Cell)
   table = table.parent;
  if (table instanceof Column)
   table = table.parent;
  if (table instanceof Row)
   table = table.parent;
  if (table instanceof Table)
  {
   for (a=firstRowToChange; a		   

• Align the column heading in the table of the ADF in the Center

  Hello
  I'm trying to align the column heading in the table of the ADF in the centre, but not able to find any property of the table, I also tried using inline CSS but not able to achieve any success.
  Can someone help me make.

  Hello

  Try:

  -Anton

• How to convert (multiple) output lines (multi-column)

  
  HII
  
  
  I have a weird request. But not sure how to get results out of it!
  
  
  My query returns two rows to a query I asked.
  
  
  
  Current result
  10
  20
  
  Expected result
  
  10 20
  
  My problem here is that I wanted two values above to be stored in two variables in a single select statement.
  
  
  
  If I use a cursor that my problem will be solved. But I'm not much interested in using a cursor for a simple select statement.
  
  
  
  is there a possibility that I can convert the output of two lines to two columns?
  
  
  
  I use Oracle Release 10.1.0.2.0
  
  
  
  Windows Xp operating system.
  
  
  
  People here will not appreciate the tags 'Urgent '. I know that :-(.
  
  
  
  But some how I'm forced to use this tag "urgent." Sorry for that.
  
  
  
  If no response, I will in another way can go to the slider :-(
  
  
  
  Any help will be appreciated.
  
  
  
  Thank you
  Pavan
  
  

  ??? WITH the clause is just a quick way to produce one on the fly table with your sample data. I think you should do a lot of reading material. In any case, use:

  select  dept,
          max(decode(rn,1,location,null)) location_1,
          max(decode(rn,2,location,null)) location_2
    from  (
           select  dept,
                   location,
                   row_number() over(partition by dept order by location) rn
             from  (
                    your-query
                   )
          )
    group by dept
  /
  

  SY.

• How to get into two different tables in two columns of a listbox of multi column

  Hi all

  I have two different tables of the values assume that table 1A (1,2,3,4,5) and another table B (3,4,5,6,7). I want to write these tables in a multicolumn listbox such as 1st column would be A array and 2nd column table B.

  Thnx in advance

  Saki,

  I hope this helps to further

• Is it possible particularly handy/quick to disable controls (multi-column listbox) when executing the output material associated?

  Please excuse me if the title of the post is not clear, I would try to explain what I need to do here.

  In the application, I am currently in train, UI use multi column listboxes in several places where a set value (one line) is selected, and based on the rowset / selected, relay/material are enabled to match a given configuration (which is then verified with your comments).  The problem is, I can easily rush into the user interface and make program stuttering and choke...

  I just put my finger down in one of the rows in the listbox control and drag my finger up and down the screen as a 5 year old child see a touch screen for the first time - he tries to each entry cache/buffer.  After I stop being 5 years old again I sit and listen to the click click of the relay for a bit.  One of these list boxes, I've already implemented enable and disable to pieces of code to implement the right before the digital output and solve the controls right after that feedback has been verified.  It was kind of a pain to do, so I wonder if there is an easier way to do it.

  Any idea or suggestion appreciated!

  Thank you

  -Pat

  PS - i As training until this weekend so I will probably not be quick to answer, but still thx for any info

  Use a "Mouse Up" event instead of an event of "change the value.

• APEX do not allow to change the lines of the columns that are the primary key?

  I have pictures:
  http://img508.imageshack.us/my.php?image=21269582oe8.jpg
  
  
  Book (id_book - 'Primary key', title, year); book_author (id_author id_book - 'Primary key', - 'Primary key'); author (id_author - "Primary key", name)
  
  
  
  I created a new page-> Form-> form of 'author' table because I want to add new authors, modification and deletion. During the creation of this page, I have chosen column 'id_author' as '1 primary key column' and everything is OK (I can't edit the 'id_author' column - this column is autoincrement and I can change the 'name' column).
  
  BUT I also created a new page-> Form-> table for table "book_author" because I like to write numbers like id_book and id_author, change and remove them (so add relations between tables: book, book_author and author). During the creation of this page, I have chosen column 'id_book' as '1 primary key column' and 'id_author' as 'column primary key 2'. And on the Web site, I can't edit these fields. And I can not add also new line because I see in each new line: (null).
  
  http://img444.imageshack.us/my.php?image=11324615yk9.jpg
  
  APEX do not allow to change the lines of the columns that are the primary key? It's stupid... What can I do?
  
  Edited by: user10731158 2008-12-20 11:40

  Column unique and not meaningful if you ever want to update. In the case of your example, you need to add an ID column in the intersection of book_author table. Honestly, I was so blown away (and pleasantly surprised) by the absence of rebuttal and the "thx" I advanced and set up an example of how I would define the book_author table:

  create table  book_author
     (id varchar2(32),
      book_id varchar2(32),
       author_id varchar2(32),
       modified_on     date,
       modified_by varchar2(255),
       constraint book_author_pk primary key (id),
       constraint book_auth_book_fk foreign key (book_id) references books(id),
       constraint book_auth_author_fk foreign key (author_id) references authors(id)
       )
  /
  
  create unique index book_author_uq on book_author (book_id,author_id)
  /
  
  create or replace trigger  biu_book_author before insert or update on book_author
  for each row
  begin
       if inserting then
            :new.id := sys_guid();
       end if;
       modified_on := sysdate;
       modified_by := nvl(v('APP_USER'),user);
  end;
  /
  

  Good luck
  Tyler

• How to give more relevance to one of the column in multi-column data store

  Hi gurus,
  
  When using multi-column datastore necessary to give more importance to one of the other column. How can we achieve the same?
  

  SQL > create table test_sh4 (text1, text2 clob clob);
  
  Table created.
  
  SQL > alter table test_sh4 Add (Text3 clob);
  
  Modified table.
  
  SQL > start
  2 ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore');
  3 ctx_ddl.set_attribute
  4 ("nd_mcd",
  5 "columns."
  6 ' replace (Text1, "", "") nd, Text1 text1, replace (Text1, "", "') nd, Text1 text1');
  7 ctx_ddl.set_attribute ('nd_mcd', 'separator', 'new line');
  8 ctx_ddl.create_preference ('test_lex1', 'basic_lexer');
  9 ctx_ddl.set_attribute ('test_lex1', 'spaces', ' /--------|-_ + "");
  10 end;
  11.
  
  PL/SQL procedure successfully completed.
  
  SQL > create index IX_test_sh4 on test_sh4 (Text3)
  indexType is ctxsys.context
  parameters
  ("nd_mcd of the data store
  lexer test_lex1')
  / 2 3 4 5 6
  
  Index created.

  Here, while querying how can I give more relevant for the text1 Text2 column as column?

  I gave an example below. I added some data to your example. You had tags and columns duplicated in your multi_column_datastore, so I fixed it those. I removed the newline delimiter and added a section with sections of field group and add this section to the index settings group. Allows you to search in each section of field and apply different fats. You can apply weights by multiplying by a value entre.1 and 10 or several times multiplier to reduce or increase the score for a particular section.

  SCOTT@orcl_11gR2> -- table structure you provided:
  SCOTT@orcl_11gR2> create table test_sh4 (text1 clob,text2 clob);
  
  Table created.
  
  SCOTT@orcl_11gR2> alter table test_sh4 add (text3 clob);
  
  Table altered.
  
  SCOTT@orcl_11gR2> -- added data:
  SCOTT@orcl_11gR2> insert all
    2  into test_sh4 (text1, text2, text3)
    3    values ('testword', 'word2', 'word3')
    4  into test_sh4 (text1, text2, text3)
    5    values ('word4', 'testword', 'word5')
    6  into test_sh4 (text1, text2, text3)
    7    values ('test word', 'word2', 'word3')
    8  into test_sh4 (text1, text2, text3)
    9    values ('word4', 'test word', 'word5')
   10  select * from dual
   11  /
  
  4 rows created.
  
  SCOTT@orcl_11gR2> -- fixed duplicate column names and tags and
  SCOTT@orcl_11gR2> -- removed newline delimiter and
  SCOTT@orcl_11gR2> -- added section group with field sections:
  SCOTT@orcl_11gR2> begin
    2    ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore');
    3    ctx_ddl.set_attribute
    4        ('nd_mcd',
    5         'columns',
    6         'replace (text1, '' '', '''') nd1,
    7          text1 text1,
    8          replace (text2, '' '', '''') nd2,
    9          text2 text2');
   10    ctx_ddl.create_preference ('test_lex1', 'basic_lexer');
   11    ctx_ddl.set_attribute ('test_lex1', 'whitespace', '/\|-_+');
   12    ctx_ddl.create_section_group ('test_sg', 'basic_section_group');
   13    ctx_ddl.add_field_section ('test_sg', 'text1', 'text1', true);
   14    ctx_ddl.add_field_section ('test_sg', 'nd1', 'nd1', true);
   15    ctx_ddl.add_field_section ('test_sg', 'text2', 'text2', true);
   16    ctx_ddl.add_field_section ('test_sg', 'nd2', 'nd2', true);
   17  end;
   18  /
  
  PL/SQL procedure successfully completed.
  
  SCOTT@orcl_11gR2> -- added section group to index:
  SCOTT@orcl_11gR2> create index IX_test_sh4 on test_sh4 (text3)
    2  indextype is ctxsys.context
    3  parameters
    4    ('datastore     nd_mcd
    5        lexer          test_lex1
    6        section group     test_sg')
    7  /
  
  Index created.
  
  SCOTT@orcl_11gR2> column text1 format a10
  SCOTT@orcl_11gR2> column text2 format a10
  SCOTT@orcl_11gR2> column text3 format a10
  SCOTT@orcl_11gR2> -- without weighting:
  SCOTT@orcl_11gR2> select score (1), t.* from test_sh4 t
    2  where  contains
    3             (t.text3,
    4              'testword',
    5              1) > 0
    6  /
  
    SCORE(1) TEXT1      TEXT2      TEXT3
  ---------- ---------- ---------- ----------
           6 testword   word2      word3
           6 word4      testword   word5
           3 test word  word2      word3
           3 word4      test word  word5
  
  4 rows selected.
  
  SCOTT@orcl_11gR2> -- with weighting:
  SCOTT@orcl_11gR2> select score (1), t.* from test_sh4 t
    2  where  contains
    3             (t.text3,
    4              '(testword within text1) * 10 or
    5            (testword within nd1)     *  5 or
    6            (testword within text2) * .5 or
    7            (testword within nd2)     * .1',
    8              1) > 0
    9  order  by score (1) desc
   10  /
  
    SCORE(1) TEXT1      TEXT2      TEXT3
  ---------- ---------- ---------- ----------
          48 testword   word2      word3
          20 test word  word2      word3
           2 word4      testword   word5
           1 word4      test word  word5
  
  4 rows selected.
  

• Report multi columns

  Helllo,
  
  I use the Application Express 3.1.2.00.02
  
  I want to do a report 3 columns.
  
  I just saw this thread (2005 - that's why I started a new)
  Report multi columns
  
  When I applied the model to my region to report, I got the following error:
  
  ERR-1025 error processing PL/SQL expression. MOD 0 (1,3)
  
  Can someone tell me why?
  
  Thank you
  
  Roseline
  
  **********************************************
  
  My query - select ename from EMP
  
  The model I created by steps:
  
  Create a report line model...
  Workspace > Application Builder > shared components > Themes > models... Create
  Model Type: report
  Method of creation: from scratch
  Name: A field - three columns
  Theme: your choice
  Template class: Standard
  Model type: named column (model line)
  
  Edit the sample report, you just create and change the following:
  Model of line 1: < td width = "150" > #1 # < table >
  Model line Condition: use based on the PL/SQL Expression
  Template line 1 Expression: mod (#ROWNUM #, 3) 0
  Line 2 model: < td width = "150" > #1 # < table > < /tr > < tr >
  Model line Condition: use based on the PL/SQL Expression
  Model line 2 Expression: mod (#ROWNUM #, 3) = 0
  
  Before lines: < tr >
  Lines back: < /tr >
  
  Create a query based region report. For my test, I used "select ename from emp". Have the report use the line template.
  
  It is just a quick sample and dirty. For a better look, you will need to do your own formatting...

  You can not just repeat mod (#ROWNUM #, 3) = 0 in all conditions - b/c who take them just like you saw. You need different lines on each.

  If you run this query, you will see why you get only 4 rows:

  SELECT 'EMP ' || ROWNUM,
         CASE
           WHEN MOD(ROWNUM, 3) = 0 THEN
            'EMP ' || ROWNUM
         END col
    FROM dual
  CONNECT BY LEVEL < = 12
  

  I think you should change to something more like this:

  Condition 1: MOD(ROWNUM, 3) = 1
  Condition 2: MOD(ROWNUM, 3) = 2
  Condition 3: MOD(ROWNUM, 3) = 0
  

  I have not tested it out but try it

• By programming the auto scroll value multi-column list boxes?

  I have a Multi column list box control that I put off (for indication only) which is used to show the progress.

  When a profile is loaded in the list box if this profile causes the scroll bar to become active it's obviously disabled and if the user cannot scroll

  That the control is disabled, the scroll bar is also disabled is there anyway that I can programmatically on the AutoScroll scroll bar?

  Hello

  You can use the property of the listbox multicoum ' cell upper left Visible.

  If your listbox multicoloum is disabled you can put vertical cursors or something on the front and give the value of the cursor to the line/Coloum (vertical scrollbar) and Coloum for the horizontal scroll bar to the "cell upper left Visible.

  Hope this helps

  Concerning

  David