TITLE will not change! Help, please

Similar Questions

• NB 100, can't enable AHCI mode. Official driver will not install. help please!

  Hello

  Is someone can you please tell me how can I activate the AHCI mode after you have reinstalled Windows XP Pro on the NB 100? I try to install the official "Storage Manager drivers" but windows tells me that the machine does not meet the requirements.

  Help, please

  Yes, you can install the AHCI drivers * after * installation of XP in Compatibility Mode.

  Directions for use:
  http://support.Microsoft.com/KB/314082/en-us

• Why can't install a program called kies, I downloaded this direct from samsung, but no matter what I do it will not install help please

  I tried to install this software on my laptop for a week without success, he keeps citing error

  none 0 x 80040702 could not load the dll dll:mmssetup, I sent an e-mail to samsung and got a response of the following, I followed all the instructions but it still does not work What escapes me. Vista i run there all updates etc etc.
  Is software called Kies, the application to organize the

  contents between Samsung mobile and PC. Kies offers
  easy access to your device, via the easy backup data management and
  Sync and powerful multimedia features.
  However, please check the system requirements before downloading, to
  ensure that it goes well. Below each element of the system configuration required
  is a link for an update, if necessary:
  Operating system: Windows XP, Vista or 7 (32 bit / 64 bit).
  Processor Intel® Pentium 1.8 GHz processor or higher (recommended)
  Minimum memory (RAM) size 1.00 GB (recommended)
  At least 500 MB of available disk space
  1024 X 768 resolution screen (600), 32-bit or higher
  NET Framework 3.5 SP1
  If it is not present can be downloaded from:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-4
  1
  3D-8319-81da479ab0d7<(>&<)>displaylang = en
  Windows Media Player 11
  If this isn't the case, current or old version is available for download on:
  http://www.Microsoft.com/windows/windowsmedia/player/11/default.aspx
  4.5 Mobile device ActiveSync (XP) or Microsoft Windows Center 6.1 or
  superior (Vista / Windows 7)
  For XP:
  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Active
  syncdownloaddownload.mspx
  For Vista / Windows 7:
  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/devicec
  Register - download.mspx
  DirectX 9 .0c
  Can be updated from:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4
  C1B-bc6a-9b6652cd92a3<(>&<)>displaylang = en
  If you need additional assistance, please contact Samsung again and
  We will be more than happy to help.

  I have

  Hello

  "If you need additional assistance, please contact Samsung again and.
  We will be more than happy to help.

  Samsung suggests that contact them again you if you need help with this.

• I downloaded an upgrade to my adobe reader today, and since my search engine yahoo has increased and will not change to google. I have a macbook pro, help please? Anyone know how I can change this back? I tried through my settings but it

  I downloaded an upgrade to my adobe reader today, and since my search engine yahoo has increased and will not change to google. I have a macbook pro, help please? Anyone know how I can change this back? I tried through my settings but it does not work

  Hi Iférouane,

  If you are using Safari as a web browser: -.

  • Open Safari, go to the Safari menu > Preferences > General and set Google as homepage. Then, choose Google as your default search engine.

  If you use Google Chrome as the web browser: -.

  • Open Google Chrome.
  • In the upper right corner of the page, click on the Chrome Chrome menu > settings.
  • In the 'Search' section, select Google from the menu drop down.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  Thank you more:
  Steve Vidacs /Hungary

  On Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  You must have installed a Windows 7 64-bit driver (if it exists)
  for this. Do you have? Otherwise, navigate to the web site of the camera
  manufacturer, search, download and install it.

  Ken Blake, Microsoft MVP

• HP Pavilion 15z Touch: screen brightness will not change

  When I use the keyboard commands to adjust the brightness of the screen, it does not work. When I go into the control panel to set the brightness of the screen remains the same. The adjustment bar will move from dim to bright but the brightness of the display will not change. How can I fix it? I've only had this computer for 4 days, so everything is still at the factory.

  Hello @KayLeeM,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I came across your post about the brightness of the display and wanted to help!

  Try searching for the Device Manager in the Start Menu.  Then expand the monitors section and see if you have an option for Generic PnP monitor.  If so, do a right-click on him and generic PnP monitor enable, if not already.  Now, check to see if you can adjust the brightness.  If you're still having problems, then try to see the following resource and let me know how it goes:

  Difficulty of Windows 10 brightness control works not problem, here's how to [Guide]

  (Not a HP website supported).

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Kind regards!

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• do not show hidden files, folders or drives - in the view tab - button will not change

  • Windows explore-
  • Organize-
  • Folder options and research-
  • See tab-
  • do not show hidden files, folders or drives button (small blue dot)

  It will not disappear.
  There is no button 'Show hidden... '. ».
  There is only 'don't show me. " ' button.
  It will not change no matter what I do.
  Most other items in the view tab have check boxes or replacements to choose.
  This is not the case.

  I want to see everything.
  What gives?

  P.S. On a side note - I was looking for initially c:\programdata (directory). That's how all this started. I FOUND IT, is told in passing. HOWEVER - IT DOES NOT EVEN APPEAR ON THE PROMPT BACK - OMG.

  Just thought I would add that :)

  Hi JoeNed,

  I see that you have some problems with the display tab in windows Explorer. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Method 2.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 4.

  You can try to restore the computer to a date earlier and check.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Method 5.

  I would like to create a new user account and check if that helps.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Police will not change when you choose to search for a font

  Hello. I'm on a MBP with InDesign CC.

  I opened a document that uses Frutiger 57 condensed. The original file used the same font, but the name of different fonts, e.g. "Frutiger 57Cond.

  I thought that the problem would be in one of the styles, since there is no character styles, I went to paragraph and changed styles police for Frutiger 57 condensed from the Frutiger 57Cond, but that did not help. Frutiger 57 condensed is installed on my system, that's why I made this change.

  Under find fonts Frutiger 57 condensed is selected, but when I click on the first series of text that uses it, it will not change the police. If I choose all the changes, nothing happens.

  I tried to copy and paste everything into a new document and preflight gave me the green light, but when I have opened the folder, I got 61 errors yet. I thought I'd try!

  When I open a new document and start typing in this font, everything seems fine. There are several InDesign documents that use this font that also do not have the problem.

  No idea as to why this particular document send me questions of police? Please let me know if there is something I can check

  Looks like you have some fonts in a folder of fonts in the document.

• The default text alignment. Will not change despite the explicit specification.

  Recently converted to OBIEE 10.1.3.3.2.
  All alignemnt text in the PivotTable will not change to align "Left". I have put all possible horizontal alignments in the report between 'Left', but still shows as centered.
  
  Above applies to all reports (converted from Siebel or newly created).
  Am I missing something? Is there a global default value?
  
  Help, please.

  Hello

  Have you checked the file view.css and pivot.fst under... OracleBI\web\res\\b_mozilla_4.You can change the alignment of this file with PivotTable segment.

  Published by: TErsin Sep 3, 2008 10:57

• My your whatsapp will not change after update

  I'm back changing my tone whatsapp after the update, but it will not change back

  Greetings, cazrose. Thank you for the communities of Apple Support!

  I see that WhatsApp is not allowing you to change his ring back to what it was after upgrade your iPhone to iOS 10 6s. I'll be happy to help you!

  How can I change my ringtone for WhatsApp? -Follow the instructions of the support that I have found on the site of WhatsApp.

  Have a great day!

• Portege M700 will not change the screen orientation

  I installed the driver for the webcam for the M700, and every time I install it, I get the same error message:

  "Open Webcam driver fail - please restart camera or computer."

  I reinstalled the drivers of many times, and it still does not work.

  Therefore, I tried the msconfig method, disabled all the startup process and then reactivated their.

  The webcam shows the same error message, and now the screen will not change orientation when I rotate the screen.

  You try to use Windows XP Home edition or what? Generally, each laptop comes with preinstalled and configured operating system.

• HP 15-r018dx Notebook PC brightness will not change

  Will not change the brightness on my HP 15-r018dx Notebook PC, without using the function keys or cursor in "Power Options." This started happening the day before yesterday; before that, I had no problem. I don't know what changed between yesterday and today.

  Could someone help me?

  Hi wkeyiosksol,

  Try using the Recovery Manager HP to restore the original drivers. Search for your graphics drivers and install them. Should be included as a high-definition or high-definition of NVIDIA Graphics Driver Intel graphics driver.

• Envy 14 DVD will not change the region Code

  My Envy 14 is until the last amendment of the Code of the region, he told me that he can change the region Code 1 more time but it WILL NOT change the region code.

  I try to change in the properties of the device of the "DVD RAM UJ897', he said 'this is your last chance to change your DVD drive region setting. Are you absolutely sure you want to continue? »... I click OK, it asks me to insert the support in this area (it is already in the tray)... I re - insert the Code region 2 DVD, and I get the error "failed to update the region Code setting. Please make sure the drive contains a region 2 media (it does) and you have administrator privileges (me) «...»

  The HP MediaSmart SW also tells me "Drive region code: region 1.» Number of times where you can change the region code: 1 ",... .He told me that the inserted DVD 2 Code region and asks if I want to change... I say yes, then confirm and nothing happens. I can't read the 2 region code DVD...

  Hello

  Start in safe mode by pressing f8 when you start your PC.  Use the arrow keys to select Safe mode and press return.  Once charged, try to change the area by car.  If it still does not work, try the procedure but with another another DVD zone 2 under Windows can be picky about what it accepts.  If it works, just restart your PC and Windows does not start normally.

  Best wishes

  DP - K

• My professional background of Windows 7 will not change.

  I have a Windows 7 Professional 32-bit computer, and will not change the background.  It is stuck on one front image, no matter what I did.  Now it is stuck on one color, I can change the color, but not to any real image.  I have a theme that has a slide show, but when I chose the theme, he said that my background is the photos for the slideshow, but when I look at its still a solid color.  If I right click on it does not give me the next opportunity to "change background".  There is an unsaved theme assigned a background in one color, but its not selected, and even if I select it and change the background it goes backward.  I can't even change the background, when I right click on an image and click on set as background.  If I save the theme, he recorded with the bottom, I wanted, and then creates a new theme unregistered with the solid as the background color and uses.  Any help would be appreciated.

  Hi, I found new information that might be useful.  It's in another thread, but I can't immediately find, but here is the important part:

  1 - Go to this folder: %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Themes\
  (copy and paste that in the start/search or Run box).

  2 - remove the TranscodedWallpaper.jpg file.

  3 try to set your wallpaper again.

  Sorry I can't find the link, but it was a confirmed a team of Microsoft TechNet blog.  I hope this helps!

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!