TMS 14.3.2 - IIS - SHA2 server certificate is supported?

Similar Questions

• Security for the TANDBERG Content Server certificate

  Hello everyone,

  I have a question: How do I renew the security certificate for the TCS web interface?

  Our client has Tanbderg COntent Server installed 4.1 and the certificate has expired, so it is inaccessible by Firefox (the only options are IE10 and less, but they also show a large number of errors).

  Thanks in advance.

  The recording is stored and then transcoded. When the process is complete, you will see registration resulting in the record view > Recorded. Click Play to view the recording. See the online help for more information.

  Installation of a security certificate

  The content Server has implemented SSL (Secure Sockets Layer) Protocol to send the authentication information of the user (username and password) to securely to the user, log in. The SSL implementation means that the web UI must establish its letters of nobility with the browser of the user through an electronic document, called a security certificate.

  Each unit is supplied with a self-signed certificate which is valid for one year. Because self-signed certificates are not a certificate authority approved, when users try to log the unit, most of the browsers displays a message that the site identity can not be verified.

  You can add the unit to the list of sites approved in Internet Explorer or add an exception in Firefox to avoid seeing the connection error messages.  However, Cisco recommends the purchase of a security certificate of a certificate to the authority who has a relationship of trust to an authority root, such as VeriSign or Comodo. These credentials are more likely to be approved by the browser, eliminating the need to add the unit to the list of trusted sites. This certificate must be generated against the Windows computer name or the DNS entry associated with the IP address that is using the device.

  To install your security certificate purchased on the web site of the default unit:

  Step 1 Connect to the appliance using remote desktop, then Start > administrative tools > Internet Information Services (IIS) Manager.

  Step 2 Under Internet Information Services, expand '(local computer)"and then"Web Sites. "

  Step 3 , Right-click on default web site, and then select Properties.

  Step 4 In the Directory security tab, click server certificate in the secure communications section.

  Step 5 Follow the instructions in the Web Server Certificate Wizard to replace the current certificate with your purchase. For more information, see using Internet Information Services.

  You can also install it for the website Administration of Windows Media and website administration of Windows Server in order to avoid security warnings when administrators to connect to these sites.

  When you installed your certificate on web sites, this certificate is then used instead of that self-signed.

  If the security certificate expires, (independent), browsers will display another warning and more no previous warning associated with self-signed certificates. A new certificate request can be generated by using the IIS Web Server Certificate Wizard.  Once this request is generated, another self-signed certificate can be created by using a third-party tool or this request can be sent to a certificate issuing authority. Do NOT remove the expired certificate until you have installed a new because this will prevent any attempt to logon.

• App 5 & SSL server certificate warning

  Hi guys,.

  I use 5 App Server from another machine to access my server El Capitan on a Mac mini. When I open the Server app from my remote machine (MacBook Air), I get a screen popup on connection of server SSL certificate and that I want to continue.

  I read somewhere, memory, that I need to install the server certificate on my local machine that connects remotely to the server. Is this correct? How would I address?

  Thank you very much for you help.

  Also, try to post here:

  https://discussions.Apple.com/community/servers_enterprise_software/os_x_server

• "the identity cannot be verified" invalid server certificate

  I had to delete and reinstall the OS [Yosemite] and get back the apps one = one tedious but necessary process == I received a warning that a server certificate is invalid etc. - I has no trust or approve it but want to know if I can / should I have - which gave me pause, is that the details are that the country is RU , parallels.com etc., Parallels Automation, Parallels organization, Moscow State == I don't use Parallels = and to feel well in any certificate with Moscow RU as the originator.  Any ideas?  It is a reference to a Web site created using the tools of the century [an American phone company] link and the URL is one that I booked at GoDaddy.

  Parallels now has its headquarters in the United States in Renton in Washington State, but it has offices in Moscow and Novosibirsk. In my view, that it was initially founded in Russia before being bought by SWsoft.

  The main product of Parallels is virtualization from Parallels Desktop software, they also make a remote access tool and the different device management tools.

• But intermediaries 1.2 root and server certificate

  Hello world

  I tried to renew the cert on ASA and I got 4 certificates from the seller

  Intermediate1 and 2

  Root cert

  Server Cert

  Server certificate is for ASA operating as VPN, what is the purpose of the other certs and where should I install them?

  Concerning

  Mahesh

  Hello Manu,

  You need to install the intermediate and the certificate root under certificates of CA on the ASDM.

  And the certificate of the server has installed under the certificate of identity section.

  After that, you need to replace the old trustpoint on SSL of the SAA with the new interface.

  I have attached the screenshots as well.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Cisco IOS server certificate - is it supported on routers 857/877

  Please can someone confirm if the certificate of Cisco IOS server feature is supported on the Cisco 857 router. We have checked with the Software Advisor and no picture for the 857 when the server certificate of IOS feature is selected, but advancedIpservices image v 12.4 (11) T arrives to the 877.

  The two 857/877 supports IOS server Certificate

  to 857 you need the ADVANCED SECURITY feature set 12.3 (14) YT

  http://Tools.Cisco.com/ITDIT/CFN/dispatch?Act=feature&ImageID=619356&platformFamily=306&featureSet=8&featureSelected=2208&availSoftwares=iOS

  877 offers more IOSes with Certificate server supports when I chose the certificate server Cisco IOS feature with featured navigator I got a lot of IOSes supporting this feature

  Go to navigator feature

  http://Tools.Cisco.com/ITDIT/CFN/JSP/index.jsp

  Select search by function and select element Cisco IOS Certificate Server, you can filter the results by platform (857/877)

  M.

• Cisco VCS - server certificate

  I get the warning "certificate unsecure: this cystem uses the default server certificate.". We recommend... "On my VCS' are

  1. is there something that I have to take into consideration related to endpoints or other VCS (this is a cluster) before you download a new certificate?

  2. communication between endpoints will affect?

  Hello

  If you are looking to get your certificates signed by yourself or a public certification authority I would first make sure that your servers have host names and configured DNS records. In addition, if you plan to use the edge of the collaboration (MRA) you should take a look at the additional without required for this:

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/Expressway/config...

  You shouldn't have issues with endpoints being affected, in my experience, the certificates have affected only edge of collaboration.

  Thank you, Simon

• BlackBerry smartphones ever-RECURRING ERROR MESSAGE "CONNECTION CLOSE" SERVER CERTIFICATE

  I get repeated screen popping up saying:

  "you try to open a secure connection, but the server certificate is not approved.

  Continue

  Close the connection

  View certificate

  Certificate of trust

  When I say "trust" and he asks me my password to the key holder, I enter, but get a message saying-

  "Certificate could not be added to the reliable key store due to restrictions of IT strategy"

  I then just keep reshowing the first screen every 5 minutes approximately and it drives me crazy.

  Can someone help me please?

  Thank you

  Vicki

  Ah, now it men feeling... it is a second hand unit that my husband received from his employer. This means that they put permissions. I'll work while using them. Thanks, you've been a great help, it was starting to drive me crazy! Vicki cordially

• Updated blackBerry Smartphones to BBM v7.0.1.23 and receive now "you are trying to open a secure connection, but the server certificate chain is not valid.

  BBM v7.0.1.23

  BlackBerry 8530

  V5.0.0.459 smartphone (Platform 4.2.0.201)

  recently upgraded to BBM V7.0.1.23 and now receive message repeated 'you try to open a secure connection, but the server certificate chain is not valid.

  battery pulled, continues to occur.

  I would appreciate your help to resolve.

  This was bugs me for a few weeks now, after update BBM to try BBM voice

  see article ID KB33968 knowledge base

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do;JSESSIONID=39AB1AF3BC35AC4B221973537775C2C7?...

  . . . I tried to insert a link shortcut to the URL, but it was not allowed.

  Looks like a fudge like BB issue a correction. I have not tried myself but is told by the way, but I'll do it later today.

• Windows networking problem, validation of server certificates

  Hello everyone,

  My school has a WiFi network that uses WPA-Enterprise Security and AES encryption; However, for some reason, in the settings PEAP, the box "Validate server certificate" must be unchecked (I have Windows 7). I also uncheck the box 'enable fast reconnect', just because that's what have checked all the mobile school (in XP), although I'm not really sure of what it is. For some reason, however, every time I wake up or start fresh, these two boxes uncheck themselves. Furthermore, I can't find a pattern, first, it will display the properties option when I right click on the name of the network, then it won't appear, then I try to connect and it will not but properties appears once again so I can recheck the boxes, so I have to log in several times. Another thing that confuses me is that it seems that, when demand information identification network appears in the middle of the screen and I connect, it won't work, but when it appears in the lower right corner, there is no. It's the strangest problem I saw, I see no reason for a box of credentials to appear in different places. I thought that everyone guess that, but all laptops to school work without problem. Any suggestions? If the fast reconnection be checked? Thanks for all the help,
  T
  Hello
  
  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
   
   

  Keep us informed on the status of the issue.

• Remove the ISE server certificate EAP

  I installed the GoDaddy server certificates on all my 1.1.1 ISE nodes, but customers are still getting the error and accept certificates.  I would just remove EAP certificate and not use any certificate for EAP.

  Explain the problem more in detail. You try to use the comments or 802. 1 x. There are many protocols of authentication you want to use EAP. TLS and PEAP require the use of the cert. What you are trying to accomplish and what are the issues?

  Jim Thomas
  Cisco Security course Director
  Global Knowledge
  CCIE Security #16674

• How to fix VMware View Server certificate revocation check connection error?

  Dear community,

  For about 2 weeks, I feel a revocation of the certificate check error in our environment Horizon see 6.2. The strange thing is that, within 12 hours about two (replication) connection servers and the vCenter Server / server of composer (on the same machine) are considered as having invalid certificates, even if, in fact, they are valid (CA certificates). We use no security servers.

  The view admin console shows the following for servers connection:

  The server certificate is not approved.

  The server certificate cannot be verified.

  For the vCenter, he said (that I have validated manually the certificate):

  No problems found.

  Certificate is not approved, but the thumbprint of the certificate is accepted.

  With the connection series on 'full', States that the login server logs for the vCenter server:

  TRACE (B 17-0 - 0E98) < VCHealthUpdate > [NativeKeyVault] validateCertificateChain response: {result = FAIL, EndEntityReasons = cantCheckRevoked, ChainReasons = invalid, SelfSigned = false, EndErrorCode = 16777280, EndInfoCode = 258, ChainErrorCode = 16777280, ChainInfoCode = 256, PolicyErrorCode =-2146885613}

  As far as I can see there no similar entries for login server certificates in the newspaper.

  At the moment I am under the environment with composer and vCenter certificates manually valid and invalid connection (red) server certificates (as view clients and browsers are not disabled).

  I already checked that I am able to do everything 'green' again via setting the registry key 'CertificateRevocationCheckType'2 (as described here Configure the server certificates certificate revocation check). This brings me to the conclusion that one of the intermediate certificates cannot be validated. So, I had the information a "version" of an intermediate (intermediate certification authority) certificate has been revoked. There seems to be no coincidence - like the time point is as well, but this particular version does not appear to be used in the servers of my connection.

  However, even with full logging enabled, I can't information which (intermediate) certificate cannot be validated and why. I expected to see something like 'OCSP verification' or 'check the CRL' but I can't find it in the newspapers. However, I noticed that one of the intermediate certificates lacked the OCSP URL (even if the field "Authority Information Access" existed). Of course I updated the certificate with a version that contains the OCSP URL, but it has not changed anything.

  In addition, I checked manually all of the certificates in the chain with openssl (for OCSP) and CRLs as well, but everything seems to be OK (all URLS are accessible and no opportunity of certificate has been revoked). Actually, I do not interpret the error as "that the connection to the server is an invalid certificate because it has been revoked", but "it cannot check if it has been revoked. The servers do not need a proxy and nothing configured, so (I checked the proxy settings system context, also).

  For now, the problem is not critical, such as 'red' status connection server has no effect on our customers and so I could turn off certificate revocation check (or switch to check that the certificate of the server (2)). But of course, I would really solve the problem.

  Is there someone who can give me a hint on what to check, for example, how do I know which certificate cannot be controlled and why? Someone had the same or a similar problem? Support VMware is working on the problem as well, but they seem don't know is not the problem, either.

  I appreciate the thoughts and responses! Thank you!

  Best regards

  Fabian

  Dear community,

  During this time, I was able to correct the error described at the beginning of this thread. Jump to the end to see what could probably help you...

  1. At first, I installed an additional standalone VMware View Server connection in order to check the following related certificates:
     1. VMware support always told me to renew my certificates because they "were not valid" etc. - even if in fact they were (like external URL calls and attested manual verification and tests).
     2. That's why I created new additional certificates for the login server and configured to include the vCenter even as my production environment - only difference was I didn't inlcude the composer who runs the server vCenter himself.
     3. The result was that the server was "green" including both the vCenter Server certificate which could be 'not reliable' by the environment of production - strange, huh?
  2. After I reset the additional server to a turned wink where connection to the server was not yet installed (before that, I uninstalled the connection to the server in case there is information in vCenter thereon) and reinstalled as a replica of the production environment server. Somehow I expected this, but still quite strange the vCenter Server (and composer) now again was considered "invalid", even if the certificate of the server connection itself considered still valid and green. For test purposes, so I put certifice revocation checking on '2' (only one server certificate check) - but only on the 'old' production servers' and 'magical' everything has been considered valid. So as I see it, there seems to be some sort of information stored on the 'old' connection servers that makes them believe that invalid certificates and that the information is replicated on the third server unless I lower the revocation of the certificate controls on these servers. Altervative explanation could be that VMware View does not accept certificates with aliases that do not include the 'real' server name - that is / was in fact certificates the old servers connection. The new server certificate connection included the real name and the alias. I understand if this is the case, but then I expect that it be documented somewhere (I have not found this information) and also wouldn't understand why it worked without problem for several years before.
  3. After finding that out, I created new certificates for the 'old' connection servers, including aliases and real names and replaced the certificate on one of the servers (and restarted the login server) - only a few successfully. Once I put the revocation checking on '4' again on this server, the login server certificate was still considered valid, but not the vCenter and certificate of composer.
  4. Now, I've uninstalled the old login server (removed from the view) and reinstalled completely (including an update of the 2008 R2 2012 R2 OS) and after I have it reintegrated into the environment, everything remained green - as long I have will activate revocation checking on the second login server "old." This is why I did the same with this (completely reinstalled and reinstated it) and now everything is green with the revocation checking enabled on all replicas of server connection.
  5. The next step I uninstall the additional replica because I created only for troubleshooting purposes.

  So what will no doubt help in similar cases:

  • Reinstall the servers of connection one by one, including:
  • Uninstalling html access (if used), uninstall the login server to view, uninstall 'VMware' AD LDS Instance.
  • Removal of the connection to the server of replication group: run "s - r s uninstalled_ vdmadmin.exeservername" on one of the servers connection remaining.
  • Reinstall/Update OS (may not be necessary, but I did not test that)
  • Reininstall, return to the login server replica. If you used the certificates which included only the alias of the server I recommend you to create new ones, including the name of the server as well, but maybe it's not necessary as well. If you want to keep the certificates which only inlcude the alias it will be necessary to install this certificate after the first replication of the servers (see below).

  My question for technicians of VMware/developers: It is supported to use certificates include only the server alias. Otherwise why it worked before and where is it documented? Where are certificate cached information so that simply replace the certificate was only some, and not a complete success (see above). FYI - when I paired initially replicas that I had to install the CA (including only the pseudonym) after the first replication - now with certificates (including the server name and the alias), I could install the certificate before you replicate (= the login server installation).

• The server certificate cannot be verified.

  See 5.1.3

  connect two servers and two security servers.

  Load the SAN certificate, worked very well so far.

  I believe that server updates of windows groups installed on the servers of connection (although I don't see why that would be a problem) and now the dash is RED and indicates the server certificate could not be verified, to Sérères of connection and two security servers.

  CertificateRevocationCheckType is set to 1 on alreay connection servers.

  Any idea?

  Co-worker deleted the registry key, restarted broker and recreated the registry key that makes green again.

  Strange!

• Logins appears not all issuing server certificates

  I try to use the dial-up connections to connect a T60P to our secure WLAN. The appropriate server certificate "Equifax Secure Certificate Authority" is not in the list, but it is on the PC.

  If I use the XP network settings for the wireless, this certificate is in the list and I am able to connect as well use it.  However, I would use instead the dial-up connection software to manage many different places.  Shouldn't the access connections software to use the same certificates found in Windows?

  I use XP SP3 and all available updates Windows and Access Connections 5.02.

  Does anyone know how to add the certificate "Equifax Secure Certificate Authority" to the list?

  Also to note that on an other T61 Vista PC "Equifax Secure Certificate Authority" appears in the dial-up connections and Vista network settings.  For example, this problem may be limited to XP.

  Thanks to robto, this problem has been solved by following the instructions in this thread:

  http://forums.Lenovo.com/LNV/board/message?board.ID=Special_Interest_Utilities&view=by_date_ascendin...

• vCO Server Certificate Problem

  I have the vCO server certificate altered in the database. This Setup worked very well and I don't know how the key in the database file has been corrupted. I'm trying to figureout what the recommended strategy is to solve this problem.

  -Soheil

  

  Save your DB, make sure that a restoration work.

  Open the certificate table and delete the record in the vmo_keystore table.

  Restart the web set up and recreate / re-import certificate.

  If you have a serious problem of restoration of your DB.

  Christophe.