To access the custom through SDK fields

Similar Questions

• Can I make my Vonage phone service and always access the internet through MSN Premium

  Can I make my Vonage phone service and always access the internet through MSN Premium

  Hello

  The question you posted would be better suited to the MSN support. I suggest you to contact MSN support for assistance.

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784
  https://support.MSN.com/contactus.aspx?scrx=1
  http://answers.MSN.com/forums.aspx?ProductID=29

• Unable to see the computers in the workgroup or server to print to my HP laptop, but I can all ping and access the internet through the router.

  I have a laptop HP with XP pro. I have a network with 2 computers laptops (Dell and HP), 1 office and 1 DP300U DLINK print server with a static IP address. I use a LINKSYS WRT110 router. Everything is connected through this router. I can ping ALL laptops, the office and the print server. I can access internet from all laptops and office. All THE MACHINES are in the same workgroup. Only from my DESKTOP (XP HOME), I can click on FAVORITES NETWORK, click VIEW group of WORK COMPUTERS and I can see the other compters and the print server. However, since my computer Dell laptop or HP LAPTOP (XP PRO) I can PING the router and the journal in it, all the other machines and print server but can NOT SEE THE OTHER COMPUTERS or ACCESS THE PORTABLE HP computer or the other laptop. I turned off all firewalls and firewall McAfee (PORTABLE HP computer) and still no joy. I think that there is a box ticked somewhere or the one that is checked and who should not, but I can't find out where it is or something else to look at. Any ideas would be appreciated.

  I suggest you take a look at:

  http://support.Microsoft.com/kb/318030/

  You can run fixit in the PC that encourage the problem this fixit automatically.

• Fonts Typekit works not when you access the site through go daddy domain forwarding.

  Let me start by saying that I am a complete nube. I have a limited knowledge of the terminology and the way that the web works but I'm learning. I have CC, has created a site for a friend and used a typekit fonts. I downloaded the site to my hosting account as a "subdomain" of my website to test and everything seemed to work very well. Once I felt that everything was ready to launch, I went to my account of go daddy friends and did his estate on the site. The site loads very well and all the fonts appear ok except one typekit fonts that I used. When you access the site directly (as a subdomain on my site, example: www.mypersonalsite.com/myfriendssite) I see typekit fonts in all its glory, however when accessing the site of the field pointed no name, no typekit fonts. Very confused. I was under the impression that the two methods to access the site will take you to the same place and yet they net of different results. Any help would be appreciated.

  Hey Danny,

  Web of Typekit fonts are served only for the specified domains to publish on time. You need to specify explicitly field of your friend when the site is published.

  The website URL (s) on the ground in the Upload FTP host and export as HTML dialog boxes take in charge several entries separated by commas as in www.mypersonalsite.com, www,myfriendssite.com

  I hope this helps.

  Abhishek

• To access the custom in another custom property properties

  How can I access the value I create in a custom property in a custom property following - for example:

  $report = get-VM-name acme *-Server $vcenter |

  Select the name,

  ProvisionedSpaceGB,

  @{N = "vCenterServer"; E={$_. "Uid.Split(":") [0]." {{Split("@") [1]}},

  @{n = 'Cluster'; E = {}

  $rp = get-view $_. ExtensionData.ResourcePool

  $parent = get-view the $rp. Parent

  While ($parent - isnot [VMware.Vim.ClusterComputeResource]) {}

  $parent is get-view $parent. Parent

  }

  $parent. Name

  }} | Tri-objet vCenterServer |

  Group-object - property {$_.} Cluster} | Select @{n = "ClusterName"; E={$_. Name}},

  @{N = "vCenterServer"; E = {$vcenter. Name}},

  @{N = "VMCount"; E = {(get-vm-emplacement $_.)} {{Name) .count}},

  @{N = "AcmeVMCount"; E={$_. Group | Measure-object | {{Select - ExpandProperty County}},

  @{N = "VMsPerAcmeVM"; E = {(get-vm-emplacement $_.)} Name) .count / ($_.) Group | Measure-object | (Select-ExpandProperty comte)}},

  In the VMsPerAcmeVM, I would simply divide the value that I created in VMCount by the value that I created in AcmeVMCount.  How refers to the value of 'VMCount' in a custom property next so I can't calculate more to for use in a division operation?

  Hello, TheVMinator-

  Well, you could do things a little differently in order to have available for your output values, you ask.  So, something like:

  ## get all clusters in this vCenterGet-Cluster -Server $vcenter | %{    $oThisCluster = $_    ## get all VMs in this cluster    $arrVMsThisCluster = Get-VM -Location $oThisCluster    ## get the VM count    $intVmCount = ($arrVMsThisCluster | Measure-Object).Count    ## get the count of VMs with name like "acme*"    $intAcmeVmCount = ($arrVMsThisCluster | ?{$_.Name -like "acme*"} | Measure-Object).Count    New-Object -TypeName PSObject -Property @{        ClusterName = $oThisCluster.Name        vCenterServer = $vcenter.Name        VMCount = $intVmCount        AcmeVMCount = $intAcmeVmCount        VMsPerAcmeVM = $intVmCount / $intAcmeVmCount    } ## end new-object} ## end foreach-object
  

  It's also a little easier: he travels each cluster and gets the news, rather than deduce the location of the cluster by finding relatives (even if it's also viable).  Anyway, how does do for you?

• DateFormat to update the metadata through RIDC field

  Could you please tell me what the date format will be valid time to update the value of metadata through RIDC field. ?
  
  I am using the ADF technology to connect with webcenter UCM and using all the registration, update, generic screens search services using the services of the University Complutense of MADRID. I am able to update the other date field type metadata text across the screen of the ADF, BUT when I update field then I get date parse error...
  
  DATE type xSubmitDate at the Complutense University of MADRID.
  
  value xSubmitDate = 08/05/2013-17:36
  
  oracle.stellent.ridc.protocol.ServiceException: unable to update the information of the content for '0804' item. The 'xSubmitDate' field does not contain a valid date. Impossible to analyze day may 8, 2013 17:36 '.
  
  
  
  Thanks in advance.

  As my post was helpful, please mark the correct/good.

  Jonathan
  http://jonathanhult.com

• How to access the handle through its pointer

  Hi all

  I have a problem regarding the use of the handle and the pointer. I try to use an external DLL library in Labview. In this DLL library, there are two functions, we're like:

  int32_t xChannelOpen (CIFXHANDLE hDriver, char * szBoard, uint32_t ulChannel, CIFXHANDLE * phChannel);

  and the other is

  int32_t xChannelClose (CIFXHANDLE hChannel),

  where this 'phChannel' is a pointer to a CIFXhandle "hChannel". Now, I want to highlight this handle 'hChannel' 'phChannel '. I think that's hard to do in C, but how could I do in Labview? Is there a method that accesses the handle of his pointer? I appreciate this very much for any advice.

  Thank you very much.

  Best regards

  Sun

  You don't need any special function for this. You must configure the call to the library function node call correctly. When you call xChannelOpen, you must configure the parameter phChannel as an integer pointer passed by pointer value. The value that will be returned in this parameter is the value of hChannel. When you call xChannelClose, passing the same value (the same thread), but this time set it up as an integer of size pointer passed by value.

• How can I make online games access the internet through a proxy server?

  I currently have to use a proxy server to access the internet. I changed my browser settings to do this, but I can't play a game online that I instaled because they are not defined for internet access via the proxy server.
  How can I make games use the proxy server to access the internet?
  Help, please. See you soon!

  Abstergo,
  You will need to have the proxy server configured to allow ports looking for the game or, if the game has the option, you can put in your proxy server information in the parameters of the game.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access the internet through the addresses in the emails from outlook express

  Any URL sent in the e-mail via Outlook Express will not access the website.

  As nothing happens when you click on the link?
   
   
  Hyperlinks do not work in Outlook Express or in Word (revised 29-Apr-09)
  http://support.Microsoft.com/kb/823301
   
  Hyperlinks do not work in Outlook Express after you put upgraded to IE7 [or IE8] (revised 29-Apr-09)
  http://support.Microsoft.com/kb/929867
   
  If still no joy:
   
  With the permission of MVP Frank Saunders. [RIP]
   
  If nothing happens when you click on a link:
  Open Windows Explorer or on the control panel.
  Go to tools | Folder options | Types of files.
  Scroll to [NONE] URL: HyperText Transfer Protocol (NOT the shortcut URL: Internet) and select it.
  Click Edit or advanced, depending on your version of Windows.
  Choose 'open '.
  Click on change.
   
  "Application used to perform action" should read:
   
  "C:\PROGRAM may EXPLORER\iexplore.exe" - nohome (check the path to)
  Iexplore.exe to ensure that it is correct and use the double quotes).
   
  DDE should be checked and in the boxes below, you should have:
   
  #1:
  « %1 »,,-1,0,,,
  #2
  IExplore
  #3 (white)
   
  #4
  WWW_OpenURL
   
  Protocol URL: HyperText Transfer with Privacy should be the same.
   
  If the foregoing is correct, uncheck the box: use DDE.
   

• I can only access the Internet through a browser. My programs cannot access the internet. Help..?

  I can access the internet without any problem in all browsers, but can program.

  For example, when you try to install Windows Live Essentials, I got an error saying I need to be connected to the Internet (but I already was!) - error: OnCatalogResult: 0x8104000b.

  And another example, I can't use Windows Live Messenger, apparently for the same reason, no internet...

  Some additional info:

  • I tried with an Ethernet connection and a wireless network
  • I also disabled the firewall Windows, but which didn't help either...

  Oh, by the way... I use Windows Vista .

  Can someone help me please... ??

  Thanks in advance

  I forgot to say that my problem has been resolved.

  It was lack of Norton. After the execution of the removal of Norton tool by PC is back online with no problems.

  But thank you very much

• VLAN internal cannot access the Internet through PIX501

  Hello

  Im having problems with my current setup. We have Cat3750 switch which acts as a base for intervlan routing. At the same time, we have PIX501 as a firewall.

  the firewall is configured to statically map our Web server to the external network. The Web server is accessible from outside.

  My problem is the following. Internal users cannot connect to the internet. Each user has been defined with gateway for their assignment of VLANS corresponding. VLAN internal works fine but can not access the internet.

  Also, all users within our network cannot ping inner (192.168.1.7) address of the Web server. the Web server is directly connected to the switchport aboard PIX.

  Our facility is the following: modem DSL - PIX 501 - Cat3750 (InterVLan routing) - access switches.

  Pleasee see connected PIx and Cat3750 running config or reference.

  all inpiuts will be highly appreciated.

  Kind regards

  udimpas

  Add a default route on your 3750 score inside the PIX interface.

  IP route 0.0.0.0 0.0.0.0 192.168.1.5

• Comments (Ubuntu) can not access the internet through host (XP)

  I used Google to find a solution as to why guest (Ubuntu) cannot access the internet. Host system is Windows XP. None of the solution has not worked for me. Solutions that worked for others: 1 activation NAT 2. Allowing the shared internet connection

  I think the problem is that my host and guest use different subnet masks default (respectively 255.255.0.0 255.255.255.0 vs) assigned by DHCP. The host's configuration manually to use the same subnet mask doesn't help either. I guess that I have it configured incorrectly.

  Welcome to the community,

  I think the problem is that my host and guest use different subnet masks default...

  Your configuration looks like, it has been changed manually! Default vmnet8 (NAT) on the host computer has an IP address like 192.168.x.1/24, comparable to vmnet1 (Host-Only). I suggest that restore you the configuration to its default settings that should work as expected.

  André

• How to extract all the accounts through REST field

  I'm fighting with the REST API calls, I want to extract all records with all of the fields available in them through REST. That's what I've tried so far:

  $client = new EloquaRequest ($eloqua_site, $eloqua_user, $eloqua_password, 'https://secure.eloqua.com/API/REST/1.0');

  $accounts = $client-> get ('/ data/accounts? search = * & count = 1000 & page = 1 & depth = complete ');

  now when I print $accounts it gives only this result:

  [1] = > stdClass Object

  (

  [type] = > account

  [id] = > 365

  [converted] = > 1372683444

  [depth] = > full

  [description] = >

  [name] = > Verkeer in Waterstaat

  [updatedAt] = > 1372683444

  [Address1] = >

  [address2] = >

  [address3] = >

  [businessPhone] = >

  [City] = >

  [country] = >

  [fieldValues can only be] = > Array

  (

  )

  [PostalCode] = >

  [province] = >

  )

  There are more number of fields available under 'Accounts' that which is visible here. All custom fields not is also not recovered, unknown reason!

  Your help is very appreciated to resolve this matter as soon as possible.

  Using version 2.0 of the rest what API should return all the field values:

  GET /Api/rest/2.0/data/accounts?depth=complete&count=1000

• Hello. I created a folder music on my external hard drive connected to my asus router.  I can now access the music through my media library.  How can I change the folder when I make new purchases to iTunes easily without doing it one by one

  I created a folder music on an external hard drive connected to my asus router.  I copied my music from my iTunes library in this folder access and can now my kodi media network.  How I updated the folder when I do new iTunes purchase without having to do it one by one thanks

  You can use a backup tool that updates only modified files.  You don't say what kind of computer you use.

  ITunes is actively using media on the external hard drive so you can replace it. Simply copy the media to one other player does not have iTunes it use it.  iTunes is probably still using media to your internal drive.

• Satellite A300D - 13 X - cannot access the internet through wireless

  Hi all, I wonder if anyone can help me, try and tell you my problem as clear as possible.

  I am more able to access wireless internet. Tried to conect via the ethernet cable and that does not work either but broadband still work as my PS3 is still accelerating signal and can still connect via WiFi with my phone.

  Everything was working fine one night and the next day nothing!

  Any help greatly appreciated

  Thank you

  Mark

  > There is a yellow exclamation point in Device Manager
  > Cheked that all the drivers and they work properly

  I put t know why you are 100% sure that the drivers work correctly if the yellow exclamation point appears in the Device Manager.
  Once again; wireless network adapter appears on Device Manager-> network without any exclamation yellow cards?

  If this isn't the case, then you need to reinstall the WLan driver again!
  The laptop seems to use the WLan-RTL8187B REALTEK card 802.11(B/G) and you need Realtek WLan driver:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads