E260 half dead help please
I have an E260 that I use constantly. After having turned it off this afternoon, I discovered that whenever I try to turn it on, only the rotary volume control now on... everything else is dead or silent.
I tried to connect to my computer, but it is no longer recognized as a USB device.
Anyone have any ideas?
Thanks for the help. Gene
Here is the solution for my problem:
http://forums.SanDisk.com/Sansa/board/message?board.ID=E200&thread.ID=24695
Tags: SanDisk Sansa
Similar Questions
-
How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you
As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.
-
Office a half is white, someone help please...
Office a half is white, someone help please... tried to restore and properties. Thank you
Hello Tp6012,
Thanks for your post. Have you tried to connect another monitor to see if this problem is related to the computer, or if you may have a faulty monitor? You can also try to go to your computer manufacturer's website and download / install the latest video driver for your computer.
See you soon
-
I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!
catsrock
Great salvation,
We are sorry for the inconvenience caused to you!
I recommend you contact customer service regarding this issue.
Kind regards
Rahul
-
I lost my iphone and its dead and I can't find on find my iphone help please!
I lost my iphone it also died and find my iphone does not. help please
Nothing we or anyone can do.
If your iDevice is lost or stolen
If enable you find my phone before it was lost or stolen, you can track only when connected to the Internet by Wi - Fi or cellular. What you can't do, is follow your device using a serial number or other identification number. Neither Apple nor anyone else may find your device. You can't recover your loss unless you make your device for the loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen, what do you do? There are things you should have done in advance - until you have lost it or it has been stolen - and things to do after the fact. Here are a few suggestions:
1. declaration of a lost or stolen Apple product
3. AT & t. Sprint and Verizon can block phones stolen/tablets
4. What-To-Do-When-Iphone-Is-Stolen
6. what to do if your iOS device is lost or stolen
7 6 ways to track and recover your lost/stolen iPhone
9 report Stolen iPad | Stolen lost found online
It pays to be proactive in following the advice on the use of find my phone before you lose your device:
2 set up your iDevice oniCloud
3. OS X Lion/Mountain Lion - in regard to my Mac
4 the free configuration find your iPhone (even on unsupporteddevices)
-
Your help please with my problem. Thank you.
Try the settings > Safari > clear the history and data from the Web site. That could help.
Can you identify some pages where this happens? I took a quick glance and the pages I saw seemed reasonable.
-
Hello
I have spent some time on it and could really use some help please. I have looked at the plot in real time in the help, searched the forum, but the examples isn't enough similarity for me change.
The attached vi is a graph of the waveform (with bars) which I use to show a single value read from a text file. The value in the text file will update once every half hour (from a data logger), for a total of 10 hours (20 values)
I would like to see each point on the graph from left to right with a spacing between the two. The value in the text file will pass (never down) so the plot resulting bars resemble a staircase (but with heights different step). The process will continue with a small break between two periods of update files and previous data points (bars) must therefore be kept (and available by zip, so I can code pretty easily).
Could someone show me how this could be achieved?
Thank you in anticipation
Ray
Hi Ray,
Here are a few examples.
The first - mod bar graph - uses a node back feeding to see if an item has been added to the data file.
You can consider using a graphic as in the second example - graphic bar. With a graphic, you can change the number of data points to resize the waveform table. In this example, a shift register is used to allow only insert new values into the table.
Steve
-
My documents are gone can anyone help please?
My computer started as usual this AM and I used it for about 1/2 hour. After sitting idle for an hour, my screen was empty, my photos generally drive like a screen saver so I thought that my monitor is dead. I rebooted to check. I have a background image of screen that displays usually and he wasn't there during the restart. My icon is still there for my documents, but when I clicked it, it says: "the folder my documents is not found." checked the properties it says J:/mydocuments. (I have an external hard drive) My computer geek installed two or three years previously. I searched for some of my files, but research shows only the same message as above. I tried to reboot again, and my background image screen flashed a brief moment before stopping. Do any one help please? Need help in detail very pls... not good in computer stuff. Thank you very much!! :(
Hi KathyAPTHORP,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Perform a System Restore and check if the problem persists.
Method 3: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 4: Create a new user account.
How to create and configure user accounts in Windows XP
http://support.Microsoft.com/kb/279783
If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.
How to copy data from a corrupted to a new profile in Windows XP user profile
-
Help, please! I have an Acer Aspire E 15 (E5-511-P4LN) that I bought online at HSN last September, 2014. I'm not really sure what happened past. On the morning of April 10, 2015, I had downloaded the Wakfu game in my computer. I played the game for two hours, then turned off my laptop around 14:30. The same day in the night, about 9:30 pm, I started my laptop, but the monitor was blocked to the Acer Logo at least a half hour! I thought that it must have the game I've downloaded so before going to bed I hibernated just my computer. When I woke up the next day, it took my computer at least 15 minutes at the start of Hibernation! Once he showed me the splash screen, there is no problem with the computer's performance. in any case, I uninstalled Wakfu of my computer when I finally got in my computer. I even downloaded CCleaner and used clean the registry. However, today, April 12, 2015, when I started my computer, he remained on the Acer Logo for at least thirty minutes before taking me to the splash screen! It's just too. I don't know what else to do.
strange question.
the 'fastest' solution will involve a backup of your data and a reinstall of windows.
If you don't mind not to do, turn off your laptop and turn it on by pressing ALT + F10 to launch Acer erecovery process.
If she starts always slowly, we try to limit the question on a clean system.
-
STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.
Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please
Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.
Solution:
1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.
2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)
3. type: BATCH spuninst.txt
4. type: exit
Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.
-Tom Steele
http://www.hawkandtom.com Tom Steele -
Help, please! black screen with blinking cursor...
my screen said to check the file system on D the type of file system is NTFS volume lable in recovery, one of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. Window to check the disk, then there a blue screen that says it was shut down to avoid damage and that a crucial thread in the system operation is released or terminated and to check the hardware or software that can be installed properly, then he did a crashdump and completed it. then he went to a black screen with a cursor of Charlotte on top and that's all he does now when I turn on the right after Gateway logo, he goes to this black screen with blinking cursor. What anddo which has happened, I hope or is this a lost cause? Help, please!
Hello
No saving necessary data and re-installing Windows Vista might be the best option, but here
are a few others.You can save your files by putting the drive in another computer as a 2nd disk (best) or external
Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
Of course a real store of the computer or the manufacturer of your system can help to recover the files.Or you can use a boot Ubuntu CD to back up data.
Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer--------------------------------------------------------------
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.First check this thread in case it is simple and if not to come back to this thread.
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you don't have the disks your
system manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (making the system restore it)
must be bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
(if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.You can use another DVD that aren't copy protected but you you need to own
Product key.On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(a line type or copy and paste one line at a time and hit enter - enter a bracket)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)
RESTART Windows
I hope this helps.
-
Help, please! Slow internet on Vista computer 17/40Mbps speed...
I have a newer computer with 4 GB of ram and a dual core cpu. I am running Vista and you have two computers that are connected to a router. The other two computers get high-speed internet, but the Vista computer gets half of what gives me my ISP. I have a connection of optical fiber with download 40Mbps. speed I 39Mbps on two XP systems but the Vista I get 17-20Mbps.
I scanned for viruses and the computer is clean, I updated the drivers ethernet, the firmware on the router and I changed the connection cables. Nothing has helped to increase the speed or performance. Any ideas? Help, please!
Thanks for the replies!
I already tried all the foregoing, but yesterday, I found two culprits. 1 I have updated to SP2 for Vista and my speedtest went up to 25/40Mbps, but the main culprit was Norton 360... Even though I disabled the program (Firewall/AV) I looked again in the application and noticed that garbage online backup, they've added was technically on but set to "manual". After you completely disable the full online backup feature, I did another test of speed through my ISP and got 39.7Mbps!
I am happy again! Thanks again for the help. -
After 1 year with the help of Windows Calendar on Vista Home Premium, I'm suddenly not able to use it (impossible to add new appointments and stored all appointments have mysteriously disappeared). I get a message saying "You cannot add appointments to a calendar that is disabled" the details of State "access denied." ... How is - it happened 'out of nowhere '? How to activate it? It's very frustrating... I searched the forums and Microsoft google the question. I found some results suggesting to either change the registry or download the fix automatically and manually merge in my registry. I tried both with no result. I have event tried to remove the old calendar and create a new one... still nothing. Any suggestions? Help, please!
Hello NYintelligentinvestor,
Thank you for using the Microsoft Windows Vista Forums.
Sorry, you have a problem with that. What type of entry you are trying to add?
Look at the calendar and on the left side, to half way down you will see a small block that will have something like "NYintelligentivnestor schedule" - there is a small block to the left of this one. To activate the calendar, click on the box to place a check mark in it.
If there are calendar shown in this block, then go to "file" on the main toolbar and click on "new calendar" - one should then appears in a block with a check mark in the box on the left.
I hope this helps. Please let us know status. Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Help, please! Connected to the VPN, but cannot access internal servers.
Hi friends,
I'm a newbie on vpn stuff, I set up a base on a Cisco ASA 5505 vpn by using ASDM, and I was able to connect to it. However, I can't ssh or RDP to one of the servers in the House after that I connected to the vpn. Here is the configuration. Help, please!
ASA Version 8.2 (5)
!
hostname sc - asa
domain abc.com
enable the encrypted password xxxxxxxxx
xxxxxxxxx encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
DNS server-group DefaultDNS
domain OpenDNS.com
sc-pool_splitTunnelAcl-list of allowed access standard 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.96 255.255.255.240
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd dns 208.67.222.222 208.67.220.220 interface inside
rental contract interface 86400 dhcpd inside
dhcpd abc.com domain inside interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4 - md5, rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
WebVPN
abc group policy - sc internal
attributes of the strategy of group abc - sc
value of server DNS 208.67.222.222 192.168.1.3
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value abc-sc_splitTunnelAcl
field default value abc.com
a001 xxxxxxxxxxx encrypted password username
a002 xxxxxxxxxxx encrypted password username
username a003 encrypted password privilege 0 xxxxxxxxxxx
a003 username attributes
Strategy Group-VPN-abc-sc
a004 xxxxxxxxxxx encrypted password privilege 0 username
a004 username attributes
Strategy Group-VPN-abc-sc
a005 xxxxxxxxxxx encrypted password username
a006 xxxxxxxxxxx encrypted password username
username privilege 15 encrypted password xxxxxxxxxxx a007
remote access to tunnel-group abc - sc type
attributes global-tunnel-group-abc - sc
address sc-pool pool
Group Policy - by default-abc-sc
tunnel-group abc - sc ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:e7df4fa4b60a252d806ca5222d48883b
: end
Hello
I would suggest you start by changing the pool VPN to something else than the current LAN network and see if that helps
These should be the configuration required to achieve this goal
- First remove us pool setup VPN VPN
- Then we delete the VPN Pool and create again with an another address space
- When then attach this new Pool of VPN again to the VPN configuration
- In the last step, we add a NAT0 / exempt for this new pool VPN NAT configuration and remove the old ACL line for the former group of VPN
attributes global-tunnel-group-abc - sc
no address-sc-swimming pool
no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0
IP local pool sc-192.168.100.100 - 192.168.100.110 mask 255.255.255.0
attributes global-tunnel-group-abc - sc
address sc-pool pool
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.100.0 255.255.255.0
No inside_nat0_outbound access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.96 255.255.255.240
-Jouni
-
I can't rip a CD with windows media player 12 on windows 7. Help, please
When I put a cd and click the rip, this is the error I get. (Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted). When I go into options to rip music, I noticed that there is not a selected folder to extract the music to know where. When I click on (change) in the music rip options menu it does nothing. I have a feeling that it is some kind of software problem, but don't know what to do. I already tried to disable & enable wmp, but still does not. I got my music rip folder set to my music, but for some reason any that has changed and nothing is there. Help, please
Hi RICKPATY,
1. don't you make changes before the show?
2. do you have any non-Microsoft media players installed on the computer?Step 1: Check if the rip music settings are correct
a. see change settings for ripping
Note: Player stores ripped songs in the music library on your computer. If you delete your music library or delete all locations of her, then you will not be able to extract music from a CD.See also extract music from a CD
Step 2: Uninstall the reader multimedia Microsoft not
a. see Uninstall or change a program
b. restart the computer after the removal of the program.
c. check to see if the problem persists.Step 3: If the problem persists, we recommend to check if another non-Microsoft program is causing this issue. To do this, follow these steps.
a. open the article: http://support.microsoft.com/kb/929135
b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
c. check to see if the problem persists.
d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
g. Article, follow "step 7: reset the computer to start as usual.Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
the SHIFT key will work not for £ sign should use Alt
Since I've updated to el Captain my macair bought in UK sign £ does not work when I hit the SHIFT key instead, I get the sign # that should appear when I type the pressed alt key. Very annoying! How can I get the sign £ back to work as usual with t
-
Satellite A80 PSA80E - where to find the display driver?
Hello! I can't find a job see drivers in my laptop vor!In the download section of the pilot is even not kategory A80 more? can sb help me pls?
-
Hello I'm looking for more details on the clock embedded to cRIOs stability (mainly 9076). Data sheet does not say much to that. So, what type of oscillator is used for the generation of on-board clock (40 MHz), how accurate is? Without this informat
-
my computer won't let me download the sp2 for vista
every time that I try in low load pack sp2 for vista it will for a while then says some of the components may not download and it is up to the sp1
-
How to completely uninstall a program.
How to uninstall completely Turbo tax? I used the uninstall from the Control Panel utility and I used the uninstaller that comes with Turbo tax. However, when I try to re - install the program, I get an error that says I have a set of forms 'double