to access the (f02, val) apex_item.text of javascript

Similar Questions

• Access the value of a [Text Input with LOV] in an ADF application Panel

  Hello

  I have a QUERY with id (queryId1) in which I filter data in a table based on search criteria. The search name of the employee.

  I would like to take this [Input Text with LOV] element value and use it in a method (the method 'myMethod' is a bean called 'myBean'). The method must also check for a NULL value value. If no criteria have been entered, (in other words, the value is NULL), an exception should be thrown. Otherwise a popup should be displayed showing the name of the selected employee.

  I should mention that I'm rather new to ADF (experience of the 1 month!) but I tried to get this working put in place three days without success. I've been all over the internet, but my lack of understanding is perhaps to my disadvantage. I was wondering if someone here might be able to send me a link on how to do so, or explain in detail how this can be done. I have also sought tutorials on YouTube but have found none.

  I work with JDeveloper Version 11.1.2.1.0

  I'm not allowed to change the version currently.

  Thank you in advance!

  Kind regards

  Riana

  Maybe this can help:

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/85-QueryComponent-fieldvalidation-427197.PDF

  https://blogs.Oracle.com/aramamoo/entry/interpret_af_query_s_queryevent

  Dario

• Unable to access the email acount and text BlackBerry Smartphones

  Hello

  I use Black Berry 9380 curve.

  For the last week I am unable to open my email on my phone accounts.

  I can receive emails but not read and send mails via my phone.

  The error message that is invited each time is:

  "Eception exception:

  java.lang.ArrayIndexOutofBoundsException.

  Please give me solution on this...

  Hello!

  Try the following:

  Remove the battery in the operating status of your BlackBerry device.

  After loading is completed, then do what is necessary.

  I hope that solves your problem!

  If your problem has been resolved then would you be asked to click 'Like' and accept as a 'Solution' that other advisors invest it times on this Message more.

  Thank you.

• How can I access the dictionary art value point by javascript

  Hi all

  Actully I am writing a few plug-in c ++ will do. This will store my custom property in art article dictinory.

  and now I want to access this value of dictinory by the javascript, is possible.

  Concerning

  Ashish.

  There is no such thing as access dictionary in Javascript, the closest thing is the Tag property for PageItems.

• To access the objects in array form using javascript

  I hope, it's a simple question that I've been beating my head on the days...

  I have a form with several fields of the same name--let's call it the recordedHours of fields.

  Adobe assign an index for each instance of the field, so we will have to recordedHours [0], recordedHours [1]... recordedHours [30]

  Now, I need to set and get the values using Javascript, so something like:

  for (i = 0; i < = 30; i ++)

  {

  var h = this.recordedHours [i] .rawValue;

  }

  It does not work. Or don't complete a reference: form1.timeform.recordedHours [i] .rawValue

  or getElement: this.getElement ("recordedHours", i)

  or the dotted notation: form1.timeform ["recordedHours"].i.rawValue (syntax error, as I have, when converted to digital gives an illegal element/object identifier)

  I tried all the ways I see maybe get and set values through Javascript and I've searched high and low on the web but couldn't find anything - I know I have probably SUS (the stupid user Syndrome), but can someone help me out here?

  See you soon,.

  Marty.

  The problem is that you have to solve the expression to be able to get the right index finger, you can use the xfa.resolveNode syntax. This allows you to pass a string and that gets interpreted for you. So the syntax:

  for (i = 0; i<>

  var h = xfa.resolveNode ("form1. ("Page1.recordedHours [" + i + "']") .rawValue

  }

  Hope that helps

  Paul

• the SQL for apex 4.2 with 'apex_item.text' region report renders incorrectly

  In the APEX 4.2 page, I created region "report data.
  
  Type = "SQl query".
  
  'User interface'-> 'Template '=' area of reports.
  
  "Area Source 'is' select apex_item.text (1, '111') as double c1".
  The select query is actually much more complex, but generally simplified it is such, that it uses the function "select apex_item.text" construction HTML textfield.
  
  If I run in query Sql Developer
  

  select apex_item.text(1, '111') as c1 from dual;

  Then it results in:

  <input type="text" name="f01" size="20" maxlength="2000" value="111"  />

  But in APEX 4.2 the report is rendered thus:
  

  <td  headers="c1">&lt ;input type=&quot ;text&quot ; name=&quot;f01&quot; size=&quot;20&quot; maxlength=&quot;2000&quot; value=&quot;111&quot;  /&gt ;</td>

  ("for this forum poster correctly I had to put extra spaces between ' ' & gt ' and ';' and so on)
  
  And APEX 4.2 shows ugly html inside the cell of report/slot for me, showing characters/symbols ">". The reason is that APEX source HTML of the page has no symbol ">" but has "' & gt; '."
  
  The APEX 3 I have a similar query works fine, without such an anomaly.
  
  What attribute should I change in APEX 4.2 region to display the result of my query as needed?
  
  I need this 'apex_item.text' function, I can't remove it.
  
  Published by: CharlesRoos on 13.02.2013 15:28
  
  Published by: CharlesRoos on 13.02.2013 15:29
  
  Published by: CharlesRoos on 13.02.2013 15:29

  CharlesRoos wrote:
  In the APEX 4.2 page, I created region "report data.

  Type = "SQl query".

  ' UI '-->' model '=' area of reports.

  "Area Source 'is' select apex_item.text (1, '111') as double c1".
  The select query is actually much more complex, but generally simplified it is such, that it uses the function "select apex_item.text" construction HTML textfield.

  If I run in query Sql Developer

  select apex_item.text(1, '111') as c1 from dual;
  

  Then it results in:

  But in APEX 4.2 the report is rendered thus:

  < ;input type=" ;text" ; name="f01" size="20" maxlength="2000" value="111"  /> ;
  

  ("for this forum poster correctly I had to put extra spaces between ' & gt' and ';' and so on)

  And APEX 4.2 shows ugly html inside the cell of report/slot for me, showing characters/symbols ">". The reason is that APEX source HTML of the page has no symbol ' > ' but '& gt;'.

  The APEX 3 I have a similar query works fine, without such an anomaly.

  What attribute should I change in APEX 4.2 region to display the result of my query as needed?

  Make sure the column attribute display as for column C1 is Standard report column.

• Align the value apex_item.text

  How can I align the value apex_item.text on the right?
  The default value is left.
  I tried to set the alignment of the column as rigth without success.

  Use the p_attributes for apex_item.text parameter to create a style attribute:

  style="text-align: right;"
  

• How to access the data in the row (text of children) in a pragmatic control tree?

  In LabVIEW 2010, I entered the data in row a tree with pragmatism control using the Add item and providing the child text table and the child tag for the line. When a row in the tree control is selected, I can get the line label in the Value property of the tree. But how do I access the data in the child text table when the line is selected? I can't seem to find a tree control property or method which will return data back.

  What I'm trying to do is: once a line in a tree is selected and a button is pressed, if the line tag is valid, I want to transfer all the data in row in another tree the same formatting. For this I need the data for the tree line and the line that was selected. I don't find a way to get access to these data of the line when it was composed in the tree.

  Can someone tell me how to access pragmatically the child text or row data in a tree control from a selected line in the tree? I have the label of the line, but how do I access data?

  Thank you for your help.

  Looking through numerous examples, I found how to do this using the properties ActiveItemRow and ActiveColNum, but I can't find these documented properties anywhere using LabVIEW. Even research through aid could not do anything about them.

  Where these important parameters are documented?

  Why they do not appear in the help?

  Are there other ways to access the data in the row (child text) form a selected line in a tree control?

• How to 'catch' the data in a field of apex_item.text

  Hello

  How can I catch the data, I write in a field of apex_item.text and copy it to another table.

  Example:

  Source table

  Create table Hund(
  PRI_KEY number,
  Name varchar2(30)
  );
  
  

  Classic report in the Apex:

  Select
  APEX_ITEM.DISPLAY_AND_SAVE(1, PRI_KEY),
  APEX_ITEM.DISPLAY_AND_SAVE(2,Name),
  APEX_ITEM.TEXT(3,weight) as weight
  From Hund;
  
  

  The weight of the column do not exist in the table Hund, but is it possible to catch what is written in the Apex Page (and put in another table)?

  EDIT: Maybe a resolution with a Collection of APEX?

  THX

  René

  René

  F01 being a checkbox only lines checked are in the table.

  This means that when the box is checked for lines 1 and 3. Only the rows are in the table in the f01.

  Then, when for the second race hollow the loop index is 2. You treat rank 3 for the f01 table but the 2nd rank of the other tables.

  You have to match the table value f03 with f01 table values to find the line number for the f20 table.

  for i in 1..apex_application.g_f03.count
  loop
     for k in 1..apex_application.g_f01.count
     loop
        if apex_application.g_f03(i) = apex_application.g_f01(k)
        then
           UPDATE PRM_CHK_BSTBS_ABGL_EDIT
           SET KOMMENTAR=APEX_APPLICATION.G_F20(i)
           WHERE NUMMER_EINHEITLICH=to_number(APEX_APPLICATION.G_F03(i));
         end  if;
     end loop;
  end loop;
  

  This will update the checked lines.

  If you want to update all the lines to leave out the inner loop and instruction.

  I don't see what you posted I have, this is the case, but it is not a good idea to mix apex_item and columns be updated regular.

  Nicolette

• Control of accessibility from the figures without alt text

  I was watching a number of PDF files for my institution and have disocvered full Acrobat XI option in the check (although I've seen this in Acrobat X as well), isn't marking errors in figures without alternative text.  It will be on some files, but on most marks just the test as adopted when it should be impossible.

  I've rechecked 'Figures require alternative text' is checked in the menu text replacement and topics.  Did I miss an option somewhere?  I am trying to create a workflow for my staff, and I had a rather error get correctly marked in order to try and get them to do not forget to handle.

  If I take the same file that passes from Acrobat and then run it through another program, such as the PDF accessibility checker, it correctly reports all these images Acrobat transmitted as images without alternative text.

  Any thoughts?

  Thank you.

  The figures have a text in the text instead of an alternative text field? I've seen this passage of the audit tool Acrobat XI but fail CAP 1.3 (surprisingly, he seems to spend CAP 2.0). The other thing, I would check is the content pane to make sure that the figures are not hidden in containers of the artifact.

• Want to access the text file of ODI linux machine installed on windows

  Hi all
  
  I want to access the text file of ODI linux machine installed on windows computers.
  To do this, I created the server data files (physical schema) and;
  
  Host(Data Sever): IP address of the linux machine
  User: user of linux machine name
  Password: data
  
  Directory: / hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1 / * application *.
  I shared the folder app in linux machine.
  When you try to run the interface using this file inside the folder app, its giving below error
  
  
  7000: null: java.sql.SQLException: file not found: /hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/app/STORAGE.csv
  java.sql.SQLException: file not found: / hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1 /app/STORAGE.csv
  
  to com.sunopsis.jdbc.driver.file.x. < init > (x.java)
  
  at com.sunopsis.jdbc.driver.file.d.b.d.a (d.java)
  
  at com.sunopsis.jdbc.driver.file.g.a (g.java)
  
  at com.sunopsis.jdbc.driver.file.w.executeQuery (w.java)
  
  at com.sunopsis.sql.SnpsQuery.executeQuery (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.k (e.java)
  
  at com.sunopsis.dwg.cmd.g.A (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  
  
  One faces this question erlier? then helpme out.

  Hello

  1. If your files are located on a remote file system, you will need to copy one of your files to the computer that Designer ODI runs to allow ODI retrieve the metadata of the file information.
  2. in the topology to create a physical schema, the directory you enter data and the scheme of work must point to this local file.
  3. then set the file data store in the designer of the ODI. Enter a name, browse and select the file and fill each deposited the files tab.

  * If it's a fixed file, click on the network icon in the column into the columns tab and have checked auto adjustment.
  * If it is a delimited file, use the reverse button on the columns tab to reverse the columns.
  * Right-click on the Datastore folder select View Data, if you can view the data, which means that store file data has been correctly set.
  * If this is not the case, check each tab of the database file to make sure that everything is set correctly and try again.

  4. once the display data to be successful, now change you directories (data and the scheme of work in topology) to point to the remote file system. These directories must be accessible to the ODI Agent that will be used to perform transformations. The directory can be an absolute path (m:/public/data/files) or a parent in the ODI Agent startup directory (.. files/demo /). It is strongly recommended to use a UNC (regardless of the location of execution) name for the path. Executing transformations "agentless", the directory is relative to the directory where Oracle Data Integrator was installed.

  You must have an agent process running on the system that contains your source file.
  Then during the race, the odi interface choose this agent.

  Thank you
  Fati

• Include the anchor and image with apex_item.text

  I wonder if it is possible to include an anchor and an image with the apex_item.text function. I tried to use the p_attributes parameter in the function, adding an anchor tag and tag the image. When I discovered the page, I can see the image and the link goes to the page I want, however, to the right of the image I see not what turns out to be my p_item_id parameter. In my case it appear on the page as a id = "f1_1" / > just to the right of the image.
  

  SELECT apex_item.text(1, ID, 15, 15,
             '<a href="f?p=&APP_ID.:23:&SESSION.::::P23_ID:#ID#" >
               <img src="#IMAGE_PREFIX#e2.gif" border="0" ></a>',
             'f1_' || ROWNUM, null) ID,

  In addition, the #ID # point the value of the href above URL (f? p = & APP_ID.:23: & SESSION.: P23_ID: #ID #) does not pass the value of the element, rather it passes #ID # as value, any thoughts on how to pass the value of the line in a table would be greatly appreciated.
  
  Our version of the ApEx is 3.2.1.00.10
  
  Concerning
  Mark
  
  Published by: bohnensm on July 12, 2010 12:04
  
  Published by: bohnensm on July 12, 2010 12:05

  Mark,

  apex_item. Text renders a text field, you try to include your own HTML (image + anchor) code as an attribute of this text field. This will generate incorrect HTML code. Instead you can concatenate the string generated for the text with your HTML code field, i.e. move it out of the text field:

  SELECT Apex_item.text (1, ID, 15, 15, null, 'f1_' |) ROWNUM, null).
  '',
  « f1_ » || ROWNUM ID, null)...

  Kind regards
  Marc

• Access the Text property in the class

  I have problems to access the text fields .text property in my object. When I try to refer to the text box outside the service to create the text field, I get "1120: access of undefined property titleField.» Any idea is appreciated. Thank you!

  You have titleField declared as a variable for instance apart from this feature. (I think.) If this variable exists in your function addTitle. When it comes to your setPanelTitle that you can't simply make reference to the instance that you created earlier.

  So I think you could declare titleField as an instance variable.

  Or, in your setPanelTitle, you can use one of the functions getChildByName. I have not used enough AS3 it know right on top of my head, but since you have given a name - which is be the same as the name of the variable you used - you can find it by name later.

• Access the raw text of TextFlow and search

  I'm trying to understand the best way to conduct a search in a TextFlow to locate a specific piece of text (a word or set of words).
  I had a hard time finding ways to actually access the raw text of the TextFlow responsible. Once it's loaded, I need to be able to search through the text, find the location of the text and show that the container.
  
  Essentially, add search capabilities to the example of Pagination.
  
  The only thing I can think of who looks like he can run would be to export the TextFlow in an XML file, and then search on the XML file. Once this is done, I have to understand what position in the file xml, the text was and load the container with this position...
  
  There must be a better way?
  Thank you, Tim

  I found a sample which is essentially what you're proposing. The example of CheckSpelling is a great place to start to browse the text in the TextFlow.
  Thank you
  Tim

• Access the value of text column header inside the loop forEach to a dynamic table: ADF 11 g

  JDeveloper: 11.1.2.1.0

  We have a requirement in which a dynamic array must be created. We are able to create the table. But we need the values for the dynamic to be columns the same as the name of the column.

  We have written the following code. Column header is is filled correctly. But the outputText (i.e. the column values for each row are coming as null.

  < af:forEach items = "#{backingBeanScope.backing_ReportsInterfaceBean.tableList}" var = "dynamicColumn" > "

  < af:column sortable = "false" headerText = "#{dynamicColumn}" id = "c3dwd" >

  < af:outputText value = "#{dynamicColumn}" id = "aot1" > < / af:outputText >

  < / af:column >

  < / af:forEach >

  We are stuck

  Emergency aid is much appreciated!

  Hi Ashish,

  Its a dynamic array. We had to access the column header.

  I've solved through hit and trial. If I change the bean has been prominently worn rather than extensive backup of bean, it works. I don't know what is the reason for this, but now it works.

  Thank you all.