To apply the logic using Last_Value

Similar Questions

• The logic using Soundflower audio recording system

  Let's start with the agreement that I must be a fool.

  I found tutorials on the net for logic audio recording using sound flower and it seems very simple.

  I actually have to make what I want sometimes.

  For the life of me I can't recreate my past successes.

  I'm to the point of madness here.

  I want to just record from Chrome, etc... any audio system, the logic.

  Help, please

  Drew

  1 / set your output to the system on your Mac for soundflower.

  (so now if you play a youtube video or a song on iTunes you won't hear anything - as it is realized in SF).

  2. in line with defined preferences of-> audio-> entry to soundflower

  and something other than control panel the value out of logic (built in output is fine)

  3 / create an audio track and assign to its entrance at Gate 1

  4 / record select the track or you can monitor the track entrance. You should now hear any audio playing on your system (from youtube or iTunes etc) (in fact guarded of logic)

  Press R to save it.

• Apply the hotfix using ADOPTION in R12.2.4

  Hi all

  EBS R12.2.4

  OEL 6.5

  11 GR 2

  The consultant encoutered issue in the setup and asked me to apply the p18955265_R12 patch. HZ. C_R12_GENERIC.

  I want to apply this fix by using "adoption." I understand that in R12.2.4, you can not apply a patch using adpatch? but only adopt?

  Patch adoption cycles mentioned the following:

  Phases:

  adoption phase = prepare-> copy the code of the application

  adoption phase =-> apply patch in PATCH environment

  adoption phase = finalize-> makes it ready for the failover system

  adoption phase = failover-> bounce the transition to the system of system files and. FS2 becomes runtime environment.

  adoption phase = cleaning-> withdrawal of obsolete objects.

  adoption phase = fs_clone-> synchronize file systems

  Do I have to perform the steps above to apply the p18955265_R12 hotfix. HZ. C_R12_GENERIC?

  Thanks a lot for your kind cooperation.

  MK

  MariaKarpa (MK) wrote:

  Thanks hussein,.

  I think that these phases are carried out in complete sequence if you apply major patches as 12.2.2 12.2.3 and 12.2.4?

  Well, these phases are applicable to the 12.2.x

  Thank you

  Hussein

• How to apply the expression using script?

  I use a script and an expression to automate all the layer selected to attend the control layer. So, I've do it now in two steps, first make a layer of control using this script:

  {

  model var = app.project.activeItem;

  var slctd_layer = comp.selectedLayers;

  var new_adjustment = comp.layers.addSolid ([1,1,1], "Control", comp.width, comp.height, comp.pixelAspect, comp.duration);

  new_adjustment.adjustmentLayer = true;

  var addSlider1 = app.project.activeItem.selectedLayers [0]. Effects.addProperty ("ADBE Slider Control");

  addSlider1.name = "time";

  addSlider1.property (1) .setValueAtTime (0, 0.06);

  var addSlider2 = app.project.activeItem.selectedLayers [0]. Effects.addProperty ("ADBE Slider Control");

  addSlider2.name = "opacity";

  addSlider2.property (1) .setValueAtTime (2, 0);

  addSlider2.property (1) .setValueAtTime (2.03, 100);

  }

  Then, I select all the layer under the control and apply the expression, for example:

  delay = thisComp.layer("Controler").effect ("delay") ("Slider") * index;

  t = time + delay;

  exp = thisComp.layer("Controler").effect ("opacity")("Slider").valueAtTime (t);

  exp;

  I'm working on an animation of the tight timelines and tons of materials with tons of layer for each model now. So I think that if it is possible to combine this stage two in a script that will automate this work for me. I'm still new to scripts and none need help with it. Thank you

  Like this:

  var ease = new KeyframeEase(0,100/6);    // speed (0 for easeIn or easeOut, influence range: 0-100)
  var addSlider1 = new_adjustment.effect.addProperty("ADBE Slider Control");
  addSlider1.name = "delay";
  // 1st key: value + ease
  addSlider1.property(1).setValueAtTime(0, 0.2);
  addSlider1.property(1).setTemporalEaseAtKey(1, [ease], [ease]);
  addSlider1.property(1).setInterpolationTypeAtKey(1, KeyframeInterpolationType.LINEAR, KeyframeInterpolationType.BEZIER);
  // 2nd key: value + ease
  addSlider1.property(1).setValueAtTime(2.03, 0.03);
  addSlider1.property(1).setTemporalEaseAtKey(2, [ease], [ease]);
  addSlider1.property(1).setInterpolationTypeAtKey(2, KeyframeInterpolationType.BEZIER, KeyframeInterpolationType.LINEAR);
  

  (The use of setInterpolationTypeAtKey is not necessary, it is only there to do things similar to what you would get by doing things by hand).

  Xavier

• Apply the effect using PlayActionEvent

  Hello

  I am applying the effect revolution 3D using PlayActionEvent. Because the effects are not recordable, I added it using «Insert Menu Item»... "and file .aia saved, which contained 3 params (itnm, lcnm and cmid). These params were sufficient to call 3D Revolve Options dialog box by using the SDK, but nothing more. Two questions:

  1. Is it possible to remove the Options dialog box? I used kDialogOff, but without effect. I assume this dialog box because I haven't specified an additional parameter (like x, y, z rotation, angle, surface, etc.), which leads to the second question
  2. How to know the list of settings that are needed for a particular effect?

  As a general rule, it is at all possible to apply effects using PlayActionEvent?

  TNX

  Zdravko

  Sorry, I should have been more clear. The discharge I posted wasn't for actions - I don't know how we're going to apply a live effect through PlayAction. Those who entered the direct effect settings. If you create and assign a direct effect in action, the parameters are accessible in the form of a dictionary. If you get the settings like an AIDictionaryRef and you would set & get entries of the dictionary by using the display names.

  Here are a few (very very) rough code showing how you would:

  Sub ApplyLiveEffect (AIArtHandle art)

  {

  Assert (art);

  AIArtStyleHandle style = 0;

  Error AIErr = sArtStyle-> GetArtStyle(art, &style);)

  THROW_EXCEP_IF (Error);

  Assert (style);

  AIStyleParser parser = 0;

  error = sArtStyleParser-> NewParser (& parser);

  THROW_EXCEP_IF (Error);

  error is sArtStyleParser-> ParseStyle (parser, style);.

  THROW_EXCEP_IF (Error);

  ASSERT (sArtStyleParser-> IsStyleParseable (parser));

  AILiveEffectHandle liveEffectId = 0; WHICH MUST BE FILLED IN

  AIParserLiveEffect parserEffect = 0;

  NOTE: AILiveEffectParameters is actually a typedef for AIDictionaryRef!

  Parameters AILiveEffectParameters = 0;

  Error AIErr is sLiveEffect-> CreateLiveEffectParameters(¶meters);.

  THROW_EXCEP_IF (Error);

  AIDictionarySuite allows you to set values of parameter here

  error = sArtStyleParser-> NewParserLiveEffect (liveEffectId, settings, & parserEffect);

  THROW_EXCEP_IF (Error);

  const ai::int32 count is sArtStyleParser-> CountPostEffects (parser);.

  You can also use pre-effect, but I find his usual poster; I'm a little

  blurry on the difference, but you can read about it in the docs

  error = sArtStyleParser-> InsertNthPostEffect (parser, count, parserEffect);

  THROW_EXCEP_IF (Error);

  style = 0;

  error = sArtStyleParser-> CreateNewStyle(parser, &style);)

  THROW_EXCEP_IF (Error);

  Assert (style);

  error is sArtStyle-> SetArtStyle (art, style);.

  THROW_EXCEP_IF (Error);

  error = sArtStyleParser-> DisposeParser (parser);

  THROW_EXCEP_IF (Error);

  parser = 0;

  }

  To change the settings, you can use AIArtStyleParserSuite::GetLiveEffectParams() & SetLiveEffectParams(). For the use of AILiveEffectHandle something like that at startup:

  AILiveEffectHandle FindLiveEffect(const char* name)

  {

  AILiveEffectHandleresult = 0;

  AI::Int32 count = 0;

  Error AIErr = sLiveEffect-> CountLiveEffects (&count);)

  THROW_EXCEP_IF (Error);

  for (ai::int32 i = 0; i)< count;="" i++)="">

  Effect of AILiveEffectHandle = 0;

  Error AIErr = sLiveEffect-> GetNthLiveEffect (i, & effect);

  THROW_EXCEP_IF (Error);

  const char * effectName = 0;

  error = sLiveEffect-> GetLiveEffectName (indeed, & effectName);

  THROW_EXCEP_IF (Error);

  Assert (effectName);

  TRACE ("effect of living found ' % s ' \n", effectName);

  If (strcmp (effectName, name) == 0) {}

  result = effect;

  break;

  }

  }

  return the result;

  }

  In this case, the effect name is "Adobe 3D Effect.

• Apply the paragraph using Enter/Return style works only on empty paragraphs

  The InDesign CS4 document, I'm working on that has paragraph styles based on other paragraph styles. For example, the following chapter for BodyFirst style is body. Hit Enter/Return after typing a BodyFirst applies in subsection empty body, no problem.

  However, I sometimes already existing text that needs to be reformatted. For example, BodyFirst may be followed by Heading1, but Heading1 must be changed in body.

  I'm used to FrameMaker, where you can go back the Heading1 paragraph so that BodyFirst and Heading1 are in the same paragraph and then press enter/return to change quickly the correct paragraph style Heading1, body style. However, InDesign repeat the last style when I press enter/return, so that in this example, I find myself with followed BodyFirst of another BodyFirst.

  Is it possible to change this so that the following paragraph style is correct by hitting enter/return by using already existing text?

  Select the paragraphs, and then right-click (ctrl-click on Mac) on the name of the paragraph style in the paragraph Styles Panel. It should give you the possibility of style "of paragraph 1 ', then the following Style.

• Lost my storage adapters after you apply the hotfix using AUVS

  Hi Admins,

  Today, I tried to patch a 4 node cluster running ESX 5.5 (build 2143827)

  The correction went well (ESXi550 - 201412001.zip), but after a reboot, my Adapters Emulex OneConnect storage 0Ce111000 disappeared...

  

  I tried to understand if there are also some Emulex driver I need to install but from what I see all the latest drivers are already installed.

  
  elxnet - 10.2.298.5 - 1OEM.550.0.0.1331820 Emulex VMwareCertified 2014-11-21

  lpfc - 10.2.340.18 - 1OEM.550.0.0.1331820 Emulex VMwareCertified 2014-12-15

  Network is fine, CF aint,

  The same drivers installed on my 3 other ESXs I of course don't have patched yet.

  What would be the next thing to check?

  Appreciate your help

  Environment:

  Running HP C7000 enclosure - Blade460c G8 with HP Flexfabric 10 GB 2-port NIC 554FLB.

  The server with the latest PSP HP Pached has solved this problem.

  See you soon

  Johan

• ORA-01403: no data found on the LOGICAL standby database

  Hello
  
  Logical question of Eve:
  Enterprise Edition Oracle 10.2.0.2.
  
  M work waiting LOGIC for 1 year but still i have not had this...
  I m not be countinuously no data foud errror on the logic of the standby database.
  
  I found the table causing the problem (db_logstdby_events) and jumped this table and table instantiated using the package bwlow:
  
  exec dbms_logstdby.instantiate_table (...)
  
  but when I start to apply the logical waiting process it gives again some were found for the new data table:
  
  I even tried to instantiate the table to EXPORT/IMPORT assistance over time, but the same problem same deal with.
  
  As much as I knew abt the error that is:
  Table1:
  ID
  10
  20
  30
  
  
  Now if sql apply processes on standby logic tent performs the operation of (for example) updated as below
  
  Update table1 set id = 100 where id = 50;
  
  above request will not be completed cos he'll never find 50 values which is not in the table. That is why this error coming...
  
  
  Now my concern is... no user didn't dare change/make of such changes on the logic ensures. So if there is no change in the tables, then apply it sqll should get all the values to be needded for an update...
  
  watingggg guyssss...

  Hello;

  How do you know that the database pending is compatible with the primary?

  Are there opportunities has one or several tables have been created on the eve before they were created on the primary? (If Yes check in DBMS_LOGSTDBY. INSTANTIATE_TABLE)

  Or jump and re-instantiate the table.

  Example of

  EXEC DBMS_LOGSTDBY.SKIP('DML','EMPLOYEES','%');
  
  EXECUTE DBMS_LOGSTDBY.INSTANTIATE_TABLE  ('YOUR_USER', 'EMPLOYEES', 'YOUR_DBLINK');
  

  Best regards

  mseberg

• Dynamically apply the color to the lines of Table

  Hello
  
  I use JDeveloper - 11.1.1.6.0 version
  
  I have a requirement to apply the background color for rows in the table dynamically.
  
  In the table, I have a few lines with a checkbox.
  
  When I select the checkbox of the line, the line selected as well as lines before and after the selected line should be displayed with a background color.
  
  Please let me know of inputs for this question.
  
  Thank you
  Ravi

  Hello

  You can do this by surrounding components of the cell (outputText, inputText, checkBox etc) with for example a panelLabelAndMessage component. Then on this property of component inlineStyle use EL to refer to a property of the managed bean. The managed bean property can now assess the State of checkbox selection. The part of thing in your question is to say during the rendering of the previous and next row that the checkbox in the line between has been selected. You must find a way to say this. An option would be to apply the logic as below

  JUCtrlHierNodeBinding currentRenderedAdfRow = ... use facesContext --> getApplication --> getExpressionFactory --> createValueExpression to create a handle to the #{row} expression
  Row rw = currentRenderedAdfRow.getRow();
  
  BindingContext bctx = BindingContext.getCurrent();
  BindingContainer bindings = bctx.getCurrentBindingEntries();
  
  DCIteratorBinding dciterator = (DCIteratorBinding ) bindings.get("Name of iterator used by table ");
  RowSetIterator rsIterator = dciterator .getRowSetIterator();
  
  Row prevRow = rsIterator.setCurrentRow(rw);
  int currRowIndex = rsIterator.getCurrentRowIndex();
  
  Row prevRow = getRowAtRangeIndex(currRowIndex-1);
  Row nextRow = getRowAtRangeIndex(currRowIndex-1);  
  
  //return CSS that colors the background if the following conditions are true
  
  if ( ((DataType) rw.getAttribute("checkBoxAttr")) ||  ((DataType) prevRow .getAttribute("checkBoxAttr")) |  ((DataType) nextRow .getAttribute("checkBoxAttr"))){
  
    //color background returning CSS
  
  }
  
  else{
    return empty string
  }
  

  I wrote this code to the top of my head, to ensure you are looking for null pointers (for example if there is no such thing as a prev-line). Also consider caching the calculation so that it doesn't have to be performed for each cell in a row, but only once per line. For example you can save the color and the line key in a bean managed in scope view and then compare the key with this bean managed before performing the calculation

  Frank

• Applying the exact same montage of two photos in Lightroom

  I put my camera on my tripod and take several pictures with different exposure settings so that I can combine them in Photoshop through masks of brightness.

  Suppose that I took two pictures (A & B) with different exposure in my lightroom settings.

  This is my workflow:

  1. apply the Lens Correction in Lightroom for A & B

  2. apply the transformation using my guides customized in Lightroom for A & B

  3 export A & B in the form of layers in Photoshop

  4. apply luminosity masks and to merge these two layers for a final image.

  Currently, I struggle to apply the same guides accurate for step 2, because I have to manually draw these lines myself.

  Is there a way to apply the same settings to the step 1 and 2 directly to two images?

  After you apply the vertical tour on one of the photos, just sync turns it up for the other photos, selecting photos, ensuring that your corrected image is the selected time/all, click Sync, and then ensure that turns up is the only selected item in the transformation.  Of course if you made other adjustments to one and not the other you selected those other institutions, but transforms standing is one who guided a copy through the vertical adjustments:

  

  

• Apply the fix of the ASM

  Hi all

  Recently, we have applied the patch on one of our instance ASM, we've reached ORA-04031 on ASM instance. Oracle, we propose to apply the patch and one of my colleague came with these steps and

  We have applied the fix successfully. I have a few questions about these steps. I would be grateful, if you could offer your expert advise on my questions.

  In step 1, we use SRVCTL to stop all the instacnes running on a single box. We have about 46 instance that is running on this node

  My question is, setp 1, mean-o and s flag done.

  In step 2, this makes sudo for < GRID_HOME > is to use the rootcrs.pl - unlock.

  On step 4, we have applied the patch to GRID_HOME, but must understand usage - oh flag

  New on stp 5, why we need to perform step number 5

  It starts at step 6, all instances by using srvct, but just curious, by the way, why we need to provide the file ampxt1d1_status with flag - n.

  1. this task is to apply the patch of the ASM

  2. stop all the instance running on ampxd1d1.

  srvctl stop immediate home o < ORACLE_HOME > s/u01/patches/tmp/ampxt1d1_status n < nide > t

  3. run the script in root of pre.

  sudo /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl-deverrouiller

  4. apply the patch using opatch

  opatch apply - oh local /u01/app/11.2.0.3/grid-/u01/patches/tmp/13951456

  5 run the suite.

  sudo /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl-patch

  6 start the instance.

  srvctl start House o /u01/app/oracle/product/11.2.0.3/dbhome_1 s/u01/patches/tmp/ampxt1d1_status n

  Concerning

  Hello

  (1) the o Specifies the oracle House and s specifies a path for the command "srvctl stop home" store the State of the resources. in this case, command (srvctl stop home - o) stops anything running oracle home.

  (2) rootcrs.pl with - unlock flag unlocks the CRS home and make it ready to patch.

  (3) the - oh indicator command opatch specifies oracle home to work on. This takes precedence over the ORACLE_HOME environment variable

  (4) - patch flag of the rootcrs.pl command specifies the oracle home is upgraded and lock it.

  (5) control of House o srvctl start will start the oracle home and all service runs from this House.

  Kind regards

• Must run opatch as user root to apply the correction #13348650 GI PSU (11.2.0.3.1)?

  Must patch #13348650 GI PSU (11.2.0.3.1) literally be run as superuser?
  
  Or opatch can be executed:
  
  * With an entry individual sudo for opatch user 'oracle' or 'grid '?
  * By accession to/etc/sudoers (may be temporary for the duration of the correction)
  
  I see that in 11.2.0.3 the grid House gets locked for security reasons. And of course ongoing enforcement opatch "with root privileges" unlocks / relocks the House during the correction process grid.
  
  Thank you.
  
  Dana

  Maybe it's not the best method to apply the hotfix using sudo, you can damage the inventory you. Go according to oracle, this hotfix Readme. And I see that this hotfix must be applied to the root user.

• Whine of high ground by speakers when using the logic or Garage Band

  Yesterday, I downloaded and installed Logic Pro. During the last part of the installation process my speakers started to whine. It is not very strong, but quite noticeable and irritating. I use these speakers (Alesis M1 Active 520) for years and have never had this problem.

  When I restart, before launching logic, the speakers are silent - which means that there is no groan even when the speakers are turned at full volume. Logic Pro is launched as soon as the whining begins.

  When I go in the preferences in the logic and change the parameters of the device, for example I pass the entrance 'none', the whine disappear momentarily while the changes are applied, then it returns a few seconds later. The only way I can get the groan to stop is to choose one output other than "USB Audio Codec" - which then of course I hear nothing of logic, except through the Mac Mini, built in speaker, other sounds play through speakers normally without any annoying groan.

  Logic Pro to quit smoking will also stop the whine.

  Reminder, my speakers will only commit the groan Logic Pro is running. The moan is noticeable when the speaker (speaker button) is set to a level higher than 30%. I normally set it to about 50-60%.

  I just opened Garage Band and it has the same problem. Final Cut Pro X (and any other programs that I use) but do not.

  Looks like you have found your comments from your Audio input... maybe the built in Mic?

  That switch off in the preferences Audio Logic... by choosing a different input audio and see if that fixes it.

• When you use Roland FC300 footswitch to control the transport, all the USB keyboard midi notes do not reach the logic. No help available on this?

  When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.

  They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.

  I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.

  I would appreciate any help on how to proceed.

  Thank you

  Paddy

  I do not understand your post. Your use the FC300 to control logic - how is it connected?   Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface?  (sense are the keyboard and the FC300 connected independently.

  When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).

  First thing to do is to circumvent the control surfaces to exclude...

  Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.

• How to stop the logic to use the midi ports

  Every afternoon.

  I use the controller kernel SSL, I configured it to use Cubase, Logic, and Studio one.  When I load logic, she keep trying to load all 6 midi ports IP with controllers instead of just he port 1 and 2 is assigned to the logic of the remote SSL software.  Is anyway to prevent the loading of logical port 3 to 6?

  Thank you

  I assume you mean a control surface, which logic detects and installs automatically.

  Go into the control Surface Setup window (Logic Pro X ➤ govern ➤ Setup...), select your controller and things in the pop-up menu 'modify ➤ remove '.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."