To count the instances of the text in a group of cells?

Similar Questions

• Copy the text in Framemaker 10 table cells

  I want to copy the contents of multiple cells in a table to another table in the same document. How can I do this so that the text is copied in several cells again and not all content in a single cell?

  Margot

  Normally, make sure that you select the same array of cells in the source table and destination. If they don't match, geometrically, it may not work. This might happen, for example, if you have an overlap in one but not the other.

  If the arrays must have the same content for certain cells, in the future, consider having the cells from the clone table fill cells shared with cross-references in paragraph text, the main table. Then the main table changes, made the clone.

• Java script for counting the text boxes

  I have 10 text boxes. Y at - it somehow I can create a java script for an eleventh text box so whenever you type a number into one of the 10 text boxes it adds the value 1. By example, if you typed a number to 4 number 4 text boxes come in box 11. I googled everywhere and I just can't understand the sense. Any help would be appreciated.

  Of course, it is possible. Let's say the text fields are called "Text1" to "Text10" and the last of them is called "Text11"

  Use this code as the custom Text11 computer code:

  var total = 0;
  for (var i=1; i<=10; i++) {
      if (this.getField("Text"+i).valueAsString!="") total++;
  }
  event.value = total;
  

• LineCount and the text of one of these counts, the text of a linewrap

  I have a long scrolling text with lots of line-cable.

  I want to extract the text in each linewrap.

  ScrollByLine... and then enter the text in this line.  Easy to do if there is a hard return at the break of the winding.  I rather not insert a CR to the scarf, but still get the text of the line.  I would call cela a spline.  Thus a line wraped would have one or more grooves.

  Someone at - he filed an elegant way to extract a "spline" of a member of the cast?  Please share.

  While I have not at hand a routine, I think remember me you need to iterate through each character looking at his charPosToLoc() and looking for a change of locV.

• How to cut the text of a group of Clip?

  Hello

  I am very new to Illustrator, I appreciate any help you could give me.  I use Illustrator CC.  I created a form composed and then used as a mask to cut out an image for the form so that the vector image is the context in which the form I created.  Now I have the text on parts of the form, and I would like to cut the text of the compound shape.  That is a hole through the object in the form of the text.  Also, I should probably note that the object I want to cut the text on is considered as a' Clip' in the layers panel.

  I tried a number of different options that I found on the forums, etc, but none seems not to work.  So far I have tried:

  1. conversion of the type of a sketch, then selecting the Clip group and type and then by a compound path.  The result: a startup error "cannot make a compound path.  A compound path is unable to combine with a regular path clipping mask. »

  2 Select the type and the Group of Clip and then using much less prominent in the Pathfinder Panel.  Result: An error message stating "the filter yielded no results.  Please select two paths that intersect. »

  3 select the type and the value at 0% transparency in the transparency Panel then selected the type and group of Clip and then tried the difference and Exclusion.  Result: Nothing, but transparent type.

  I enclose a photo of the object and the text I want to cut him and also the layers panel.

  I'd appreciate any help I can get.

  Thank you

  Michelle

  

  Michelle,

  What happens if you go back to the objects in the first picture with the direct Type and:

  (1) select all instances of three Type and group them.

  (2) select the Group Type and group in the flyout palette (Panel) transparency and Clip click the opacity mask making with Clip and mask Invert unchecked (if this sounds wrong to change these options, it should work with those when you have black Type)?

• How to share the text on BBM group

  Hi I want to share text on the BBM group. How to do this?

  If during polls BBM (specific contact), I use:

  InvokeActionItem {
              title: "Share Text Over BBM"
              query {
                  mimeType: "text/plain"
                  invokeTargetId: "sys.bbm.sharehandler"
                  invokeActionId: "bb.action.SHARE"
                  data: "This is some text to share."
              }
          }
  

  And it works, but how to share on BBM group?

  And is there a documentation on the complete list of possible value for:

  -InvokeTargetId

  -InvokeActionId

  -MIME type

  Thank you

  sys.bbgroups.sharehandler is the id of the target for the BBM groups.  Here are some examples on how to share text or an image with a group BBM.  The user will be asked to select the group to share with.

  InvokeActionItem {
      title: "Share Text Over BBM Group"
      query {
          mimeType: "text/plain"
          invokeTargetId: "sys.bbgroups.sharehandler"
          invokeActionId: "bb.action.SHARE"
          data: "This is some text to share in a group."
      }
  },
  InvokeActionItem {
      title: "Share Image Over BBM Group"
      query {
          invokeTargetId: "sys.bbgroups.sharehandler"
          invokeActionId: "bb.action.SHARE"
          uri: "file:///accounts/1000/shared/photos/avatar.png"
      }
  }
  

• change the text of legend group object image size figure

  I need to change the text frame size legend for figure based on the width of the figure in grouped objects

  How to do it please advice.

  Your information and code are not accurate! > Some parentheses are missing, expand the textframe 240 or the width of the image?

  However: Everything made to the works contained in the user interface, it expands the scope of the legend in my test to the right. I decided to write an own function for editing.

  main();
  
  function main() {
  
  var curDoc = app.activeDocument;
  var allGroups =  curDoc.groups;
  
  for (var i = 0; i < allGroups.length; i++) {
    var curGroup = allGroups[i];
    var pItems = curGroup.pageItems;
    if (pItems.length != 2) { continue; }
    for (var j = 0; j < pItems.length; j++) {
      var curItem = pItems[j].getElements()[0];
      var constrName = curItem.constructor.name;
      if (constrName == "Rectangle") {
        var rect = curItem;
      }
      else if (constrName == "TextFrame") {
        var tf = curItem;
      }
    }
    var rectGB = rect.geometricBounds;
    var tfGB = tf.geometricBounds;
    tfGB[1] = rectGB[1];
    tfGB[3] = rectGB[3];
    tfGB[2] = tfGB[2] + 20;
    tf.geometricBounds = tfGB;
    fitFrame(tf);
  }
  
  function fitFrame(aFrame) {
    var lastBaseLine = aFrame.lines[-1].baseline;
    var b = aFrame.geometricBounds;
    aFrame.geometricBounds = [b[0], b[1], lastBaseLine, b[3]];
  }
  }
  

  Note: The script will check if there are two elements on the page of the group. It does not, check if these two elements are textframe and rectangle, it assumes that it is correct.

  Kai

• cannot change the text field after grouping

  Hi people,

  I have 3 single-line text fields and a logo combined using 'Add parents '.  For some odd reason, I can't select a field to edit text.  I can select them in the assets Panel and change the layout or style, but as soon as I double-click to edit the text, my selection goes to the div parent instead of the text field.  I tried to use the text as well, but it always happening in selection to the parent.  This isn't a big deal since I can change the text later in a Publisher, but it's a little frustrating.

  FWIW, I ran the update of this morning before starting, but I doubt that caused this nothing thanks for any help

  -Kevin

  So sorry Chris, in my frustration, I removed the parent and the group so I can get the item that I wanted to edit, and then recreated the parent.

  However, your description of the differences between the Group and Add Parent in this discussion: http://forums.adobe.com/thread/1361983?tstart=0 probably explains why I have problems.  I think I had GROUPED fields 3 text and then wrapped in this group and the image of the logo in another div with 'Add parents '.  I have probably not been not clicking successfully through the parent company to the group, and then in the text field.  In fact, I was clicking like mad, but probably not on the correct spot for each level.

  Thank you to specify how these elements work.

  -Kevin

• keep fonts, padding and the color of the text when editing of jtable cell

  Hello
  
  I've implemented a JTable, where the columns have different padding, alignment and the lines have different colors.
  Implementation of the padding, alignment, color works fine.
  However, when editing in a cell, the text is displayed in its original state, both in the default font, without colors, padding...
  How is it possible to edit a cell, while the typed text retains the properties of the row and the column (such as the font, color, fill,...)
  
  Thanks a lot for any help

  You need a TableCellEditor customized to take account of all parameters. I guess you already a TableCellRenderer so use code of the rendering engine for get params for cells and use them in the editor.

• How to select all the text, all layers including locked or not visible, using VBScript?

  I'm looking for the more elegant syntax through a document and select all the text frames.

  You cannot select objects in... locked or hidden layers, so you will need to unlock/show layer and do what you need to do with the text, while the layer is visible/unlocked.

  to get all the loop text through the text in the object of the document, you will get all the text elements. If you loop through text in a layer object, you won't get the text located within groups.

• Hang the text position germane: can it be done?

  We use text blocks which occupy only half the width of the page.

  Sometimes, I have a high level course that breaks on a second line. I prefer to keep the text on one line and get him out of the block of text (either to the right or the left, according to the odd/even character of the page).

  I know that I can cut and paste the title in a new block of text and apply space above the paragraph next to the body, but:

  • It's messy
  • This breaks the sequence between the images etc.

  Is there a way I can put one single paragraph to 'break' the border of the text block?

  Thank you

  Then try this: convert the paragraph of title to a single table cell. That the cell wide enough so that the text on a single line - cells are allowed to stay outside (even though no one knows why)-, but take care of is not to make any longer than necessary. Then, select the paragraph that this table is 'in' and set its justification "Away from Thorn" or "toward the spine.

• Is there a way to have Acrobat Reader to count the number of times a specific text string appears instead of just pointing out their?

  Allows CTRL F to find the text that I'm looking for, but I'm looking not only for them, I'm also trying to count how many times the string appears in the file.  Y at - it a function or one way to do other that manually hit F3 and hoping that I have caught all of them when the program highlights many instances instead of each of them individually?

  Hi nancib92837443,

  You can use advanced search option (CTRL + SHIFT + F) which provides the number of instances for a specific search.

  Thank you

  Abhishek

• How to clear the text drafted the Bitmap by graphics.drawtext (...) (try to do a count down on top of the Bitmap)

  Hello, I'm doing a count down on top a Bitmap image. I use graphics.draw (),
  However, this ended up writing the text on text, no matter what I do.
  Example: when the second = 3, the image will be 3 shot
  When the second = 2, the image will be 2 on top 3 drawn on it (in this case 3 does not appear)
  When the second = 1, the image will be 1 of 2 on top 3 drawn on it (in which case 2.3 does not appear)

  Can anyone help please, thanks in advance... Here is the code:

  Timer each who calls every second {...
  {Synchronized (UiApplication.getEventLock ())}
  Bitmap temp = BitmapOriginal;
  Graphics g = Graphics.create (temp);

  Font myFont = Font.getDefault ().derive(Font.BOLD,13);

  StartcountDown.setFont (StartcountDown.getFont () .derive (Font.BOLD, 15, Ui.UNITS_pt));

  int xOffset = (int) ((BitmapOriginal.getWidth () / 2)-(Font.getDefault().getAdvance(Integer.toString(startCountDown))/2)); (temp.getWidth () - Font.getDefault () .getAdvance (Integer.toString (startCountDown)));
  int decalage_y = (int) ((BitmapOriginal.getHeight () / 2)-(Font.getDefault().getHeight()/2)); (temp.getHeight () - Font.getDefault () .getHeight ());

  g.setColor (Color.WHITE);
  g.setFont (myFont);

  g.Clear ();

  g.drawBitmap (0, 0, BitmapOriginal.getWidth (), BitmapOriginal.getHeight (), BitmapOriginal, 0, 0);
  g.drawText (Integer.toString (startCountDown), x_offset, decalage_y);

  PicAndText.setBitmap (temp);
  }
  ... }

  You can't disable text written on Bitmap. However, you don't have to write the text on the original. This:

  Bitmap temp = BitmapOriginal;

  won't. You copy not the original - you get a reference to it.

  Something like that

  Bitmap temp = new Bitmap(BitmapOriginal.getWidth(), BitmapOriginal.getHeight());
  Graphics g = Graphics.create(temp);
  g.drawBitmap(0, 0, temp.getWidth(), temp.getHeight(), BitmapOriginal, 0, 0);
  

  copies BitmapOriginal in temp, leaving intact and ready for the next use. The trick is to create a new bitmap every time to handle.

• Need help to count the characters in several layers of text

  I use following code to count the number of characters and words in a single text layer. Is it possible to count the number of characters and words in a several layers of text. ?? Help, please

  Java Script code:

  //

  /*

  < javascriptresource >

  < name > Count words and characters < / name >

  < / javascriptresource >

  */

  function run()

  {

  var layer = activeDocument.activeLayer;

  If (layer.kind is LayerKind.TEXT)

  {

  Var words = layer.textItem.contents;

  Words = words.replace (/ (\r\n|\n|\r) "/ gm," "");

  var countwords = words.split("").length;

  var compteLettres is words.split("").join("") .length;.

  Alert ("\n" + countwords + "Words\n" + compteLettres + "Characters", "Count");

  }

  on the other

  {

  Alert ("select a layer of text.', 'Count');

  }

  }

  Run();

  2015, use it at your own risk.

  #target "photoshop - 70.032»

  If (app.documents.length > 0) {}

  var theTexts = main();

  alert (count (theTexts.join ("\n")));

  };

  ////////////////////////////////////

  int main() {}

  the file;

  myDocument var = app.activeDocument;

  get the number of layers;

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Dcmn"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var applicationDesc = executeActionGet (ref);

  var number = applicationDesc.getInteger (stringIDToTypeID ("numberOfLayers"));

  treat the layers;

  var theLayers = new Array;

  for (var m = 0; m<= thenumber;="" m++)="">

  try {}

  Var ref = new ActionReference();

  ref.putIndex (charIDToTypeID ("Lyr"), m);

  var layerDesc = executeActionGet (ref);

  var layerSet is typeIDToStringID (layerDesc.getEnumerationValue (stringIDToTypeID ("layerSection")));.

  isBackground var = layerDesc.getBoolean (stringIDToTypeID ('background'));

  otherwise the layer group.

  If (layerSet! = "layerSectionEnd" & layerSet! = "layerSectionStart" & isBackground! = true) {}

  theName var = layerDesc.getString (stringIDToTypeID ('name'));

  theID var = layerDesc.getInteger (stringIDToTypeID ('layerID'));

  var hasText = layerDesc.hasKey (stringIDToTypeID ("textKey"));

  If the layer type;

  If (hasText == true) {}

  var textDesc = layerDesc.getObjectValue (stringIDToTypeID ('textKey'));

  Letexte var = textDesc.getString (stringIDToTypeID ("textKey"));

  theLayers.push (theText)

  }

  }

  }

  catch (e) {};

  };

  return theLayers

  };

  Count characters.

  function count (theString) {}

  Var words = theString//layer.textItem.contents;

  Words = words.replace (/ (\r\n|\n|\r) "/ gm," "");

  ////////////////////////////////////

  Remove double spaces and space at the end;

  While (words.indexOf("")! = - 1) {words = words.replace ("","")};

  spaces var end = \s$/;

  Words = words.replace (spaces, "");

  ////////////////////////////////////

  var countwords = words.split("").length;

  var compteLettres is words.split("").join("") .length;.

  return ("\n" + countwords + 'Words\n' + compteLettres + 'Characters');

  };

• count the entity instances

  Hello
  I want to count the entity instances. OPA provides the same InstanceCount() function. However, only works if the entity instance screen is submitted. I want to make it work any any point. Any idea?

  To control a flow on a summary screen, simply create a Boolean visibility attribute:

  the flow is enabled if
     InstanceCount(the thingamies) > 0
  

  Then, set the attribute for visibility on the flow on the summary screen "the flow is activated" with a default state of persons with disabilities (or hidden). Then, it will be hidden when the number of instances is unknown.