To determine if a form using the command (Unix) HOST of output and a running process.

Similar Questions

• How to pass variables by using the command line when starting from a native application ActionScript

  How to pass in variables or arguments to start using the command line when starting a native ActionScript application? For example, I have my app MySweetWidget call and it was compiled with Adobe AIR runtime in captivity so now I have MySweetWidget.exe.

  In the command line, I call MySweetWidget.exe and would like to pass in variables or properties of the application. I guess that these variables are read from the loaderInfo.parameters object.

  Please let me know if the Adobe AIR runtime supports passing the parameters to native execution. If so, I would like to help determine the correct format of how pass variables. So would you want to read those loaderinfo.parameters object?

  Thank you

  Jeff

  I found the answer to my own question:

  Yes, it's a feature supported. It is documented on the following page:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/desktop/NativeApp lication.html #event:invoke

  When you subscribe to the event from the NativeApplication invoke it will subsequently send the event and you read the table of e.arguments object to get the start in the native application arguments.

• Ho I can spend iMac Display Mode target without having to always use the command + F2?

  I use my MBP 13 as my driver all day at work, and I use an iMac (initially, the daily pilot) as a secondary screen. I use the MBP to go to meetings and, basically, to expand my mobility at work (which is the reason why I got the laptop in the first place).

  Here's my question, how to optimize the installation so I don't have to use command + F2 on the iMac, whenever I want to thank the poster for the MBP when I plug?

  Thanks for the help.

  You are looking for a shortcut to a shortcut? Sorry cannot be done.

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• Can't paste the screenshots using the command C?

  Hi, I've always been able to take screenshots (command + Opt + shift + 4) and paste them directly in mac mail emails or Messages by using the command + c. lately I am not able, maybe since 10.11.4? I am still able to take screenshots but I am unable to paste them. They are now on my desk and I have to search for them and then drag - move which is more slow than before.  I also notice the same problem in photoshop CC 2015, that I can paste is more directly the screenshots but drag and drop them on the desktop.

  I don't know what is the cause. Everyone knows this and is there a way to fix it?

  Thanks for your help.

  Press the function instead of the Option key when taking the screenshot.

  (141973)

• First HP: help using the command CAS.solve (STRING1, STRING2) within a program

  Hello and hope you can help me with my problem!

  I write a somewhat complicated program (operating mode no case) who has a subroutine called STSOLVE where his entry is always a string from the main program that contains a formula as "'I' = 'V' / 'R', 'R'" and its goal is to replace all the variables contained in "" to the compatible standard CASE generated automatically variable (teiXX where XX is a unique number) and then use the command solve to assess this formula (say final temporary formula "tei1 = tei2 / ') tei3, tei3"). Before returning, he replaces the temporary variables, generated automatically with the original on the result, so the original formula will be sent back solved in the main program.

  My problem:

  It returns the result {UNDEF} or simply {} even in expressions that absolutely work if used with the command solve manually, in the main screen of calculators CASES when the CAS.solve command is used either! Even though I know that the entry of this order is correct according to the tutorials I've read in the forums, I can't work properly.

  I tried all methods of writing the order and I only managed to get a result when I wrote this:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, "tei2");

  .. .or RPART1 contains, say, the part 'tei1 = tei2/tei3' (NOT AS A STRING!) and "tei2" SHOULD be written as shown here, a chain, entered manually just for test (can be 'tei1' or 'tei3' too for this particular case). However, if I put "tei2" in RPART2 of local variable in the subroutine as a string and then pass this variable to the solve command, say:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, RPART2);  RPART2 contains the string "tei2", "tei1" or "tei3.

  Here again, I get a {} as a result!

  I tried so already a lot of things that I don't know exactly what mention here, but I hope I described the main situation enough to start detailed and of course, I'll give you any other information you might need to give me more help. I tried to paste the entire subroutine, or even the entire program, but I don't have any windows pc to connect the first HP and copy the program. I am writing from an Android Tablet and I should maybe type the everything here is not very easy, I will of course if you ask.

  Perhaps, I should also note that the generated vars tei1, tei2 etc. do not exist as variables in the calculator, but if I copy channels same as the program tries to run in the command CAS.solve and manually write in case screen (not a string of course) then they get solved without problems.

  Hope to get help and learn from you and I wish I could found more help about it online, but it seems very difficult and also all the tutorials I found on the cas.solve command in the programs did not work in my case!

  Andreas

  It works, or is this not the problem?

  CAS.solve ("tei1 = tei2/tei3", "tei2");

  I get output: {tei1 * tei3} which is correct.

• Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  It is to capture a piece of the element you want to screenshot, make a fire using full-screen control + 3

• Problem: Using the command 'msg' with 'system Exec.vi.

  I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

  I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

  I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

  @echo we
  CD c:\Windows\System32\
  Msg.exe /server:localhost * test

  When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

  Potential quirks:

  I discovered in a different place under a machine to receive these messages they need to have a registry entry:

  "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

  Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

  Any ideas why I'm having a problem?

  TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?

  
  

• The list of permissions of the files using the command line

  Hi all

  My windows operating system is windows Server 2003 R2.

  Now, I'm trying to find a solution that can display all the permissions of the file of each folder and its subdirectory by using the command line syntax.
  I tried to use ICACLS to solve this problem, but its result contains the permissions of all files/folders. I just want to have the permission of files, not the permissions of each individual files.

  Is it possible to just show the permissions of folders with ICACLS? If it is possible, what sentence from command line?

  However, I also looked at Systinterals AccessChk and AccessEnum without finding a solution.

  If you have no good solution, please share with me.

  Advanced thanks.

  Hi Leo,

  The question you have posted is related to file permissions in Server 2003 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserversecurity/threads

  Hope it will be useful.

• I can settings add e-mail account by using the command line?

  Can I programmatically or by using the command prompt add parameters of "e-mail account"? for example: IMAP/POP3 "Incoming mail server" etc.

  No, there is no API to add an account without the help of the default interface of the to do.

• How to use the commands on the cmd prompt witout using a string like 'netstat' but I need output

  How use the commands on the cmd prompt witout using a string like netstat but I need output
  example: C:\ > netstat-an... will give its results
  But if the keyword netstat is blocked...
  I want to use the command netstat another way... can I convert it to binary, and then I can run or something else
  Please answer my questin

  Netstat is simply a file program located in the folder C:\Windows\System32.   It appears as "netstat.exe.  If you rename (or copy / paste / rename) to "abc.exe" then you can run it using 'abc' instead of 'netstat '.

  HTH,
  JW

• Is there an online class to learn exactly how to use the command prompt which is quite through. OR y at - it clear a book that explains in detail for this? Who should I contact?

  I would like to know how to use the command prompt.  The nethodology type in the cmd prompt with the syntax and the Liposuction, in other words, the real return to a command prompt. I downloaded about evertthing I can find about this, but can't seem to put it all.

  My OS is Windows XP Pro sp3, lots of RAM, my address is * address email is removed from the privacy *.   I would like to take a rough online study if one is available if it is not too expensive.

  It really depends on what you mean by "to a command prompt."

  If you open a command prompt window (for example, in start > run > cmd > OK), you can enter a number of orders.  The list of available commands, including their syntax, is here--> http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ntcmds.mspx?mfr=true

  You can also follow the links here:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ntcmds_o.mspx

  If you want to get more sophisticated - automating command-line tasks - you can start here: http://technet.microsoft.com/en-us/scriptcenter/default.aspx

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Can't remove read only attribute even using the command "Attrib - r".

  I have my computer laptop configuration to dual boot Windows Vista and Windows 7.  I installed Windows 7 to see Vista, images, music files and videos Documents in its libraries.  These four files have become read recently that in Vista, and I can't remove the read-only attribute.  I tried to use the attrib command in command as suggusted in KB326549, but I get a message "access denied."  I want to be able to access these files from two operating systems so that I don't need to save the files on two hard disk partitions.  Any suggestions?  Thank you.

  Jon

  By default, you have only write access to folders and files located inside your user (c:\users\yourname) directory, some hidden folders, and any file that you created.

  The only time you need to write access to all files outside of this area is at this time do system administration or install a program.

  This can be done easily by running some tool or install the program you use "Administrator" by right-clicking on it and clicking Run as administrator, which allow the tool access to the system.

  It's the new way of doing things in Windows Vista - the system is locked, and only the programs you are running as an administrator or you request automatically the authorization are allowed to access your computer. This will prevent programs to access your computer without your knowledge.

  This command "Run As Administrator" is ideal to run on Windows Explorer and command control.exe (Panel).

  It is * NOT * recommended that you change the security settings to allow write access on the operating system created for files and folders, as this will significantly reduce the security of your system.

  So, in essence, it becomes a question of permissions/ownership.  Here's how to deal both:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product).  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!
  Lorien - MCSA/MCSE/network + / A +.

• How to use the command shutdown in vista?

  I used the shutdown command to make sure that the computer is turned off at some point in XP, but I just wanted to put my own computer to shut down after accidentally booting to Vista Home in order to download a large file while I was at work.

  I tried shutdown-s t 9000, which should have set a time limit of two and a half hours, but he gave me the help screen message.
  I saw that the main difference is that dashes had been changed to slashes, but "shutdown /s /t 9000" also failed.

  What is the correct syntax to use the command? I confirmed that 'shutdown-s-t 9000' works very well in my XP virtual machine, if that is the new syntax to accomplish the same thing with Vista? I tried "run as administrator" to the command-line nothing helps.

  Hello
  It is the command to shut down the computer in Vista.
  SHUTDOWN [/s] [t / xxx]
   
  xxx/t:  The value of the timeout prior to xxx seconds. (The valid range is 0-600, with a default value of 30. The use of / t xxx implies the /f option.
   
  /s: Shut down the computer.
   
  /f: Force running applications to close without prior notice to users. (/ f is automatically defined when used in conjunction with xxx/t).