First HP: help using the command CAS.solve (STRING1, STRING2) within a program

Similar Questions

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• Help with columns of FIXED LENGTH - using the command of the coil

  Hi guys,.
  I have a vision I try to be wound using columns of fixed length, and the spacing is off. Ive tried many things like specifying the width of the column before executing the query, using the command rpad, but nothing seems to work. I have the coil in a text file so that users to import this file into another system. I'd appreciate any suggestions. Thank you very much. What follows is the view:
  
  SELECT 'Employe_id', 'FIRST NAME', 'INITIAL', 'NAME', 'SUFFIX', ' TRAINING ', 'Class ID', 'Class ID', 'We', "make / model ', 'Cali', 'Barrell', 'Serial number', 'Qualification', 'Application', 'SCORE', 'Status', 'add a time', 'Add a record ID', 'Add a record Date', ' change record ID ',' save the modified Date ', 'RN' OF
  (SELECT
  Upper (RPAD (tbl. SSN, 10)) AS "Employe_id."
  UPPER (RPAD('',12)) AS "FIRST NAME."
  UPPER (RPAD('',1)) AS "ORIGINAL."
  UPPER (RPAD('',20)) AS "LAST NAME,"
  UPPER (RPAD('',5)) AS "SUFFIX."
  SUPERIOR (RPAD (to_char (QUALDATE, 'MMDDYYYY'), 8)) AS 'DATE OF TRAINING. "
  Upper (RPAD('P123',8)) AS "Course ID"
  Upper (RPAD('',6)) AS 'class ID ',.
  Upper (RPAD ('P', 4)) AS '' We. ''
  Upper (RPAD('',4)) AS ' make / model.
  Upper (RPAD('',4)) AS "Cali,"
  Upper (RPAD('',7)) AS "Barrell."
  Upper (RPAD('',15)) AS "serial number."
  Upper (RPAD('A',4)) AS "Qualification."
  Upper (RPAD('D',4)) AS "Application."
  TO_CHAR ((RAWSCORE/250) * 100, "fm000.00") "SCORE".
  Upper (RPAD('PASS',4)) AS 'Status. "
  Upper (RPAD('',8)) AS "add time"
  Upper (RPAD('',8)) AS "registration Add ID."
  Upper (RPAD('',8)) AS 'Record Date added',
  Upper (RPAD('',8)) AS "Record ID change."
  Upper (RPAD('',8)) AS "Date of registration of the change."
  ROW_NUMBER () over (partition by firearms_scores.ID_NUMBER QUALDATE desc order) rn
  OF FIREARMS_scores, TBL
  where scores.id_number = tbl.id_number
  and qualyear = "2010" and coursecode = "SA".
  order by employee_id)
  where rn = 1

  Hello

  You RPAD does nothing, because they are identical:

  SQL> SELECT NULL AS "Record Add ID",
    2         NULL AS "Record Add Date",
    3         NULL AS "Record Change ID",
    4         NULL AS "Record Change Date" FROM DUAL;
  
  R R R R
  - - - -
  
  SQL>
  

  Does not see why the leadership of the COLUMN should not do what you want. Maybe you forgot the quotes?

  SQL> COL "Record Add ID" FOR a18
  SQL> COL "Record Add Date" FOR a18
  SQL>
  SQL> SELECT NULL AS "Record Add ID",
    2         NULL AS "Record Add Date",
    3         NULL AS "Record Change ID",
    4         NULL AS "Record Change Date" FROM DUAL;
  
  Record Add ID      Record Add Date    R R
  ------------------ ------------------ - -
  
  SQL>
  

  PS: You probably shouldn't affect the width of a column that is smaller than the length of the header

  Concerning
  Peter

• Install programs by using the command line?

  My computer will not install packaged with Bitrock Installer programs.  How to do this? I used the command line in the past, but I forgot how.  It must be installed all by activating not the installer to Bitrock.  Or what I can do for my computer compatible with the Bitrock Installer?

  Hi sallysantlerart,

  1. what program are you trying to install?

  2. what happens when you try to install the program?

  You can consult the following links to install the program by using the command line:

  http://msdn.Microsoft.com/en-us/library/aa372024 (v = vs. 85) .aspx

  http://msdn.Microsoft.com/en-us/library/Aa367988 (v = vs. 85) .aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• Can not find templates of virtual machine by using the command 'Get Template '.

  Hi all

  My apologies if this question was asked before, but not could not find any information about this.

  For some reason when I use the command Get-model PowerCLI I get no results even though I have models on the data store. Using a command such as Get - VM works as expected, but for some reason that the command Get-model just can't find anything. There is something pressing that I may have missed in my virtual environment configuration?

  The environment consists of a data center with a 5.1 ESXi host and several virtual machines residing on it. I also have a virtual appliance of vCenter to manage the host.

  Thank you

  Matt

  Hi Matt,

  When you run Connect-VIServer, you connect to the server ESXi and vCenter?

  I just tested the two:

  • SE connect-VIServer-ESXi Server
    • Get-model didn't recover all data
  • SE connect-VIServer-Server vCenter
    • Get model retrieved data

  Maybe that's the case?

  Hope this helps,

  Steven.

• Can't paste the screenshots using the command C?

  Hi, I've always been able to take screenshots (command + Opt + shift + 4) and paste them directly in mac mail emails or Messages by using the command + c. lately I am not able, maybe since 10.11.4? I am still able to take screenshots but I am unable to paste them. They are now on my desk and I have to search for them and then drag - move which is more slow than before.  I also notice the same problem in photoshop CC 2015, that I can paste is more directly the screenshots but drag and drop them on the desktop.

  I don't know what is the cause. Everyone knows this and is there a way to fix it?

  Thanks for your help.

  Press the function instead of the Option key when taking the screenshot.

  (141973)

• The list of permissions of the files using the command line

  Hi all

  My windows operating system is windows Server 2003 R2.

  Now, I'm trying to find a solution that can display all the permissions of the file of each folder and its subdirectory by using the command line syntax.
  I tried to use ICACLS to solve this problem, but its result contains the permissions of all files/folders. I just want to have the permission of files, not the permissions of each individual files.

  Is it possible to just show the permissions of folders with ICACLS? If it is possible, what sentence from command line?

  However, I also looked at Systinterals AccessChk and AccessEnum without finding a solution.

  If you have no good solution, please share with me.

  Advanced thanks.

  Hi Leo,

  The question you have posted is related to file permissions in Server 2003 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserversecurity/threads

  Hope it will be useful.

• I can settings add e-mail account by using the command line?

  Can I programmatically or by using the command prompt add parameters of "e-mail account"? for example: IMAP/POP3 "Incoming mail server" etc.

  No, there is no API to add an account without the help of the default interface of the to do.

• How to use the command shutdown in vista?

  I used the shutdown command to make sure that the computer is turned off at some point in XP, but I just wanted to put my own computer to shut down after accidentally booting to Vista Home in order to download a large file while I was at work.

  I tried shutdown-s t 9000, which should have set a time limit of two and a half hours, but he gave me the help screen message.
  I saw that the main difference is that dashes had been changed to slashes, but "shutdown /s /t 9000" also failed.

  What is the correct syntax to use the command? I confirmed that 'shutdown-s-t 9000' works very well in my XP virtual machine, if that is the new syntax to accomplish the same thing with Vista? I tried "run as administrator" to the command-line nothing helps.

  Hello
  It is the command to shut down the computer in Vista.
  SHUTDOWN [/s] [t / xxx]
   
  xxx/t:  The value of the timeout prior to xxx seconds. (The valid range is 0-600, with a default value of 30. The use of / t xxx implies the /f option.
   
  /s: Shut down the computer.
   
  /f: Force running applications to close without prior notice to users. (/ f is automatically defined when used in conjunction with xxx/t).

• How to program a chkdsk using the command prompt?

  could someone tell me how to plan (for once only, not repeatedly), windows automatically fix file system errors and find the attempt to recover bad sectors, using the command prompt? I want to perform this check to my external hard drive when windows are on the boot sequence, not on the 'normal' environment for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  Hello

  Start - type in the search-> CMD box find top - make a right click on - RUN AS ADMIN

  To the guest who is probably similar to C:\Windows\System32 >

  This type by replacing X with the correct drive letter.

  CHKDSK X: /f /r

  Where X: is the drive letter for the external drive - spaces after: and f.

  C:\Windows\System32>chkdsk X:/f/r

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• User names found using the command run "control userpasswords2" do not match my user accounts

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  I finally thought to it. They wore all the user names that came when I ran the command "control userpasswords2". As I said in my original post, user names in all the names of the Panel user control over all matching computers. The only conflict I've had was in the list of user names in the list found when I ran "control userpasswords2". I went to highlight the 'B' account after that I ran the command, you click Properties and changed his name to 'A'. This solved my access denied problem once and for all. Apparently he does not have all of the accounts in the control panel.

  Don

• Unable to connect to the SSID network which has the Double course using the command Netsh Wlan

  I tried to create a batch file that would connect to a wireless network, the name of the SSID is:

  simple "13."

  When I try to use the command:

  netsh wlan connect easy "13".

  It returns an error saying that the profile does not exist.

  I tried to use the following escape characters:

  netsh wlan connect easy \"13\.

  netsh wlan connect ' easy '13.

  But nothing seems to work and I can't find anything related on google. Can someone help me?

  Thank you

  Rene S.

  Hello René,.

  Thanks for posting your query in Microsoft Community Forum.

  You try to create a batch file to your question, I would say that you re - ask your question in the MSDN forum rather than on this forum. MSDN is watched by other computing professionals and developers who would more than likely be able to help.
  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues

  Hope this information is useful.