To dynamically set values as session variables

Similar Questions

• Setting value to a variable binding

  Binds the values of variables can be access with this:
  
  AttributeBinding deptBinding =
  (AttributeBinding) getBindings () .getControlBinding (bindName);
  Return deptBinding.getInputValue ();
  
  Can I set the value of a variable binding in the same way?
  
  To define a value of binding, I currently have access to the ViewObjectRowImpl and make a setVar (x) in order to get, but it's very hard. I would like a more direct via liaison system if possible.

  Yes you can set it as

  AttributeBinding attr = (AttributeBinding) bindings.getControlBinding ("test");
  attr.setInputValue ("test");

• Action dynamic set value for the Shuffle.

  I have a Select list that bears the name of the servers. Depending on the value selected in the select list, the random component must be filled. I created a dynamic action to select the list complete the Shuffle. It does not work. Any help is appreciated.
  
  I gave shuffle as the name of the item assigned to the dynamic action, I chose the option to set value, set SQL statement type and the following query:
  SELECT DISTINCT MOUNT_POINT IN SERVER_DISK_SPACE_UTILIZATION WHERE SERVER_NAME =: P2_SERVER_NAME
  
  Thank you.

  Hi Nicolas,.

  If you use APEX 4.0 or more, then the feature you're looking for is given for the selection list and shuttle (non-random) I think!

  My assumptions are:

  Select the list item: Servers (P2_SERVER_NAME)

  Shuttle point: Mount Points

  Just what you need to do is, in shuttle item properties there is a section from the list of values :
  Set
  Cascading LOV Parent items to P2_SERVER_NAME

  List of values definition of

  SELECT DISTINCT MOUNT_POINT FROM SERVER_DISK_SPACE_UTILIZATION WHERE SERVER_NAME=:P2_SERVER_NAME
  

  I hope that helps!
  Kind regards
  Kiran

• Values of session variables dropped

  I'm tracking entered info on a box of electronic commerce using session variables.  All goes well until a user changes their shipping information.  All of a sudden half of variables that contain billing information lose their values.  They are not deleted; they are simply empty.

  I scoured the code and there are no errors that could trigger the variable shipping updates to affect those billing.  The routines are all encased in cfswitch/cfcase tags AND I commented ALL the bits of executable code in the page and the problem persists.  I also tried to change the names of variables billing also unsuccessfully.

  I'm out of turns.  Y at - it a bug or something that affects my application?

  DRM for any help any of you can offer.

  ~ ValC

  To test, place this line to a place where you are sure that all billing session variables are defined. The duplicate is a clone, and so a snapshot is frozen in an instant.

  Place the following code after the code that treats the shipping information.

  
  
  
  

  Compare the values in two landfills.

• Values of session variables not updated according to the values in the table

  Hello
  
  I have a problem with one of the session variable that is based on the USER login.
  
  My session variable "DeptID" has all the values associated with the user. I have in my external table, the USER and its corresponding departments. My init for this variable block is something like
  
  Select "DeptID", dept_id of user_table where user =': USER ';
  
  Now I use this variable on my main dashboard prompt and I'll show the results in the command prompt based on the results of sql. Here is my SQL something like
  
  SELECT 'Department '. "" Department name ""SH"where"Department. "" ID Dept ' = VALUEOF (NQ_SESSION. ("" DeptID ").
  
  With this method, everything works well and the command prompt displays the correct values.
  
  But the problem arises when a new Department is added to the current user. When new departments are assigned to the user, the new values does not appear in the drop-down on the line of dashboard until and unless the cache is purged and the server is restarted.
  
  Thinking that the cache is the issue, I have disabled the cache also in the nqsconfig.ini file. But then as the new values is not displayed. I see that in the file nqquery.log that the old values are sent to the database, that that is the session variable does not get updated with the new values according to the external table.
  
  You could someone please let me know what I'm missing here?
  
  
  Thank you

  Hello

  See this thread for the answer,

  Re: OBIEE external DB security does not completely.

  Thank you
  Swami

• How do I dynamically set values of the pages on a null value when an item is changed

  Hi all

  I am new to Oracle Apex.

  I have P_ITEM1 as a selection and P_ITEM2 also a list selection of value P_ITEM1. (to my condition that I do not use cascading article Parent LOV)

  I submit the page when the P_ITEM1 value is selected then LOV on P_ITEM2 gets refreshed based on the P_ITEM1 value.

  I am train to clear the item previously selected to P_ITEM2 when the value of P_ITEM1 is changed.

  I tried to create a dynamic action on the change on P_ITEM1 event and net Action on P_ITEM2.

  and the dynamic action does not work.

  Thank you.

  -Kumar

  Kumjeeth

  Set the attribute area of the Page to send items to P_ITEM2. He would submit the P_ITEM2 on dynamic action of refreshment.

  Nicolette

• OBIEE 11g - the session variable, NQ_SESSION. VARIABLE, has no definition of value

  Hello

  I see a strange problem when using the SESSION variable in OBIEE 11 g SPR for the level of data security.

  The RPD, I created a new block with the PRODUCT session variable init and wise initialization line is defined.

  SQL -SELECT DISTINCT 'PRODUCT', product_id OF BI_SECURITY WHERE UPPER (USER_ID) is UPPER(':USER')

  Condition of data filter is defined on the tables & Dimension in the application role

  Filter data based on products assigned to the user in the security table is applied.

  User A has produced 15 assigned ID

  User B has 100 product ID assigned

  The user was able to connect to the presentation of OBIEE and see assigned product ID are filtered in the report.

  But when a user B signs he sees below error, when you run the same report

  [nQSError: 23006] The session variable, NQ_SESSION. PRODUCT, has no value definition

  Is there a limit on the number of values in session variable can contain.

  Why the error occurs only for user B?

  Has anyone encountered this problem?

  Thank you

  We found there is nothing in the list of the product id is assigned to user B, so report OBIEE failed with [nQSError: 23006]

  Adding a NULL value is NOT fixed INIT SQL block this problem with access from user B.

• Branch to the same page with different session variables

  Hello guys,.

  Is there a way that allows to create a branch that redirect to the same page with a different set of values for session variables. Or is it an effective way to add the buttons after that moves through the consecutive records in the pre and oracle apex.

  hope someone can help me.

  Kind regards.

  -shashikahk-

  is there a way to add the following buttons and pre

  If you create a form using the wizard pages, Apex will automatically create these buttons in some cases (as in a master form / retail).

  Create a master page / detail demo so you can see how it works. Apex creates a pre-rendering process:

  Get the value of the primary key next or previous

  Some of the hidden objects, such as Pxx_ROWID_NEXT.

  And two buttons: GET_PREVIOUS_ROWID and GET_NEXT_ROWID

  (if you do not use rowid as the primary key, another name will be generated).

• How to add a session variable to a url?

  I try to update a record, then go to another page that needs an url parameter in the address to the recordset with the subject of the page. I have the setting in a session variable egg don't know how to add to the url in the box in the dialog updated to record. I use the VB ASP script in Dreamweaver CS3.
  Can someone help me?

  I found the answer. I tried to redirect to another page after editing a record. Url redirection requires a derived parameter of a session variable. My url with the parameter was the following: "trRecordClassesDetails.asp? ID = ' + Session("TrainingDateDetails") + '" when I tried I got an error "Application uses the value of the wrong type for the current operation.

  Solution:
  I read on another forum that the parameter name of the term 'ID' to a certain number. The session variable that I use for the parameter returns a number, but when I changed the name of the parameter to 'AgtID' instead of 'ID' everything has worked. The new URL is now:
  "trRecordClassesDetails.asp?" AgtID ="+ Session("TrainingDateDetails") +". "

• How to add an extra session variable to authenticate the connection

  Hello

  IM totally new to php and dreamweaver develop a web application that uses the user name and password to authenticate the connection, and works very well. My question is, how do I add an extra session variable to capture another field in the users table for example type to redirect some pages based on the value of the type?

  If you're completely new to Dreamweaver and PHP, it sounds as if you're using Dreamweaver server behaviors. Take a friendly piece of advice and stop using the server now behaviors. They have been removed from Dreamweaver CC a couple of years because they use functions that had to be stripped on the next version of PHP. This version (PHP 7) was released in November. If you rely on Dreamweaver server behaviors, you are living on borrowed time. For a person to debut, it makes no sense to learn how to use a dead technology. The server behaviors work only in PHP 5. As soon as your server is upgraded to 7 PHP, you will have to start all over again. To understand the problem, see the following page in the PHP online documentation: PHP: Introduction - manual.

  If you want Dreamweaver to generate the code for you, you will need to use (paid-for) third-party extensions, such as those created by DMXZone or WebAssist. You can also learn how to write PHP code yourself. It is not as difficult as it sounds.

  To create a variable session, just to assign a value to an element in the superglobal array $_SESSION:

  $_SESSION ["$myvariable"] = "value";

  Session variables are available only on the pages that begin with session_start().

• Getting name of dashboard in the session variable

  Hello
  
  I need to know how I can get the name of dashboad dynamically by using a session variable.
  
  as VALUEOF (NQ_SESSION. The USER) gives me the name of connected user. In the same way, say that I am in the financial dashboard - GL balance, so if I use VALUEOF (NQ_SESSION. CHEMINPORTAIL), it should automatically filled with GL balance eb. If I'm in the dashboard of sales - sales page of the region, adapted, it must be populated with the sales by region.
  
  
  Thank you

  If it's 11g try then @{dashboard.name}
  For more information http://gerardnico.com/wiki/dat/obiee/presentation_variable_system

• Using the dashboard invites you to initialize session variables

  Hello world
  
  I want to know if it is possible to have a command prompt of dashboard which is only used to change session variables. This prompt would stay in a tab completely unrelated.
  
  
  Is this possible?

  When the user changes the variables in the prompt of

  I guess its value not the variables... .am I get?

  the variables seem to work only in the tab corresponding to the command prompt, even if the guest is configured to be valid in the dashboard.

  (1) scope of application/presentation variables is in the table edge or the page

  (2) as I illustrated it in a demo of dashboard have two pages variable req and multi select when I change the value in the command prompt, it changed the variable quantity value means the value of session variable initialization

  The dat I gave screenshot is what you're looking for or something else?

  Thank you
  saichand.v

• ADF refresh page with page fragments jsff jsf after the set session variable

  Hello.

  I have a model that includes a button that allows you to select a profile, you push the button appear available profiles, choose one and press to accept. After that, I put a variable session successfully.

  I have a page of 'First' of jsf with two fragments of page jsff after seeing a link. The display link is composed by a headerView and detailView. The headerView had a variable binding. What I need, is that this parameter (bindVariableParameter) can be defined by the session of the model variable.

  That's what I get:

  I am in a homepage (separate Application Module), model button is pushed until I load "first" jsf page and after that, I go to the page jsf 'First', that information is loaded successfully. What I do in the Application Module is something like this:

  protected void prepareSession (one session) {}

  SessionScope card = ADFContext.getCurrent () .getSessionScope ();

  Company string = (String) sessionScope.get ("compId");

  System.out.println ("Default Comapny in British Colombia is:" + company);

  super.prepareSession (session);

  this.getSession () .getUserData () .put ("The company", company);

  System.out.println ("after the definition userData value card BC");

  }

  And in the variable binding expression of the headerView that I use:

  adf.userSession.userData.Company

  It works very well! But!

  When I press the button again and I chose another profile, the info is not updated. In the headerView or in the detailView.

  Also, when I go to the 'First' jsf page (without previously pressing the button model), I had no info, which is just, because I have no session variable. After I have press the model and select the profile, but the page is not refreshed.

  I tried many ways to this, but I'm lost.

  Could you help me?

  Kind regards.

  I'm not sure that understand your use case. What do I get, you set a parameter after that you press a button on the home page to pass this parameter to the first.jsf.

  Why don't you implement a method of the application module and call it directly with the parameter. The session of preparation will not be called whenever you browse but only init am.

  Do you need the parameter in the layer model or only in the display?

  Timo

• Value of the session Variable does not get updates.

  Hello
  I have a Session variable, I am assigning it an initial value [3] during the loading of the page. But, during the drop value menu selection and the "submit" button hit, I update the value of the Session variable.
  The update is unsuccessful and the session variable is preserved the initial value. Here's the code used to assign the value to the Session variable:
  
  < ISdefined ("FORM.submit") cfif >
  < cfset Session.numTasksDisplayed EQ #FORM.filter # >
  < cfelse >
  < cfset Session.numTasksDisplayed EQ 3 >
  < / cfif >
  
  When to use cfoutput after these instruction to check the value of the Session variable, its gives me the initial value of 3. Form.Filter is the value from the drop-down list menu option selected.
  #FORM.filter # #Session.numTasksDisplayed # < cfoutput > < / cfoutput > < cfabort >
  
  Any help is appreciated.
  Thank you and best regards,
  Vijayvijay77.

  First of all, you cannot use EQ with CFSET comparison operator. It should result in an error. If this is done on the bottom, there will be an error and nothing is set.

  Also, are you sure that FORM. Offer exists during the validation of the form?

  -Fernis

• How can I activate the values hidden Login form in session variables?

  QUESTION: How can I get form elements hidden for primelang, studylang, country and nationality of the Login form Post table to become the session variables?

  Adobe page at http://kb2.adobe.com/cps/165/tn_16563.html gave me the info that didn't work because the code is old. The first question I asked was answered in useful, but partial and no values are appearing. All this is set out below, and I don't know if I can shorten and still make sense.

  Page 1 has a form of connection with six fields.

  The textfields in form are the user name and password.

  The hidden form fields are: nationality, country, studylang, primelang and their values will be set by incoming was a previous page URL or hard-coded in.

  I am trying to create four hidden fields session variables to avoid having to deploy recordsets on each subsequent page.

  After the "connect" button is pushed, I want that these four form fields hidden, nationality, country, studylang, and primelang and their values, proceed to the next page, as of Session Variables and then be available to all pages so I can use them in the links to other pages and in < img src="folderX/SessionVariableValue/book1.php. > Make sense?

  Each page of support seems to work:
  On the login page, the $MM_redirectLoginSuccess = "yadayada.php"; works very well.

  I used <? PHP if ($_POST) {print_r($_POST) ;}? > to check the post table and it works properly for all areas.

  I created links to the four Session Variables with the same words: primelang, studylang, country, nationality, and them deployed on the recipient page:

  <? PHP echo $_SESSION ['primelang'];? >

  <? PHP echo $_SESSION ['country'];? >

  <? PHP echo $_SESSION ['nationality'];? >

  <? PHP echo $_SESSION ['studylang'];? >

  QUESTION: How can I get the form to primelang items, studylang, country and nationality of the table to enter the head Post code on the recipient page? I have deployed it in the code of the head, but the gentleman who offered assistance previously not a not inform me how to get the hidden field values in the "what".

  <? PHP session_start();
  $_SESSION ['nationality'] = 'whatever ';
  $_SESSION ['studylang'] = 'whatever ';
  $_SESSION ['primelang'] = 'whatever ';
  $_SESSION ['country'] = 'whatever ';

  $nationality = $HTTP_POST_VARS ['nationality'];
  $studylang = $HTTP_POST_VARS ["studylang"];
  $primelang = $HTTP_POST_VARS ["primelang"];
  $country = $HTTP_POST_VARS ['country'];
  ? >

  What is the magic, missing link?

  I tried to use form Variables to pick up the values, but PHP doesn't, or I messed up.  I can't find a FULL explanation of how to create, move, retrieve and deploy the Session Variables anywhere on the web. Thank you for your help.

  What is the magic, missing link?

  You're going to start, but the magic missing link is the realization that "it doesn't matter" is a fictitious string that represents everything you want to assign to the session variable.

  $HTTP_POST_VARS and $HTTP_GET_VARS are obsolete. You must replace them by $_POST and $_GET respectively.