to run a spare drive in a virtual machine?

Similar Questions

• Convert a hard drive to a virtual machine

  I have a server that the material died which has mirrored hard SATA hard drives in them.  I would like to convert the data on that hard drive to a virtual machine and put it in my vCenter, but I am unable to start the server.  What is the best way to do it?  I can mount and read data from Windows on another machine.  Right now I'm trying to back up data until an acronis image and then use converter to import.  I think it is easier to sense, though.   I also have a backup server Symantec Backup Exec, but I do not have the agent ESX for Symantec.

  Thank you

  Dave

  If you want to try the converter, just fix the disk on a physical host somewhere and run a normal conversion.

  Once you have done this, create a new empty virtual machine with no disc and you fix vmdk for the reader you want migrated to this new virtual machine. Chances are that you will get the normal NT Loader boot error when you try to start, but you should be able to solve this problem using a fo the following:

  DiskPart

  Fdisk

  Recovery Boot

  You can also consider to use something else than VMware converter - perhaps something like Acronis True image?

  Good luck and please feed back.

• ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  Objective: move vmdk to store data with adequate storage and then increase storage D: 20G to 100G

  Converter is not available on this architecture. Can I migrate cold vm to the different data store, no prob.

  Question: Without use of the converter, method 3 can be used without a secondary vm? In other words, just by using target vm offline, online, offline? Or is it a problem of signing/OS disk on the Windows Virtual PC?

  I need to move vmdk in different LUN and extend drive vm windows on D: (non-OS drive). Is this possible via the single procedure? Options?

  To use method 3 to http://communities.vmware.com/thread/81121 requires available vm 'secondary', I did not.

  Method 3? Using of vmkfstools and another VM of Windows to extend a drive

  o stop the VM to resize

  o log in the console ESX Server via Putty

  o Type? vmkfstools? X & lt; new size of drive & gt; vmfs/volumes / & lt; storage volume name & gt;. / & lt; virtual server name & gt;. / & lt; the virtual disk name & gt;? That is to say. /vmfs/volumes/Storage1/my_vm.VMDK new disk size can be specified in kilo, mega, or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk of 20 GB of 24GO you would put 24000 m or 24g

  o the second virtual machine to help stop

  o change the second virtual machine settings and add the first virtual machine hard drive

  o power on the second VM and load the disk management snap-in and verify that the first virtual machine disk has unallocated on it space

  o select Start, run and enter diskpart.exe

  o the command? the list of volume? This will show you all the volumes.

  o select your volume based on the results of the list volume command, IE. ? Select volume 1?

  o type the command? extend? to extend the volume

  o check again the disk management snap-in and the volume is expected to be expanded with a greater ability

  o stop the second VM and remove (do not remove) the record of it

  o turn your first VM and the new space should be there and ready to use.

  Also, I'm already aware of Dell extpar:

  http://www.RTFM-ed.co.UK/?p=1310

  http://support.Dell.com/support/downloads/download.aspx?c=us & CS = 19 & l = in & s = DHS & ReleaseID = R64398 & formatcnt = 2 & starts = 83929

  for VI3, vmoiton of storage is made by RCLI plugin or a 3rd party

  I prefer the plugin

  http://www.virtualizationadmin.com/articles-tutorials/VMware-ESX-articles/VMotion-DRS-high-availability/storage-VMotion-SVMotion-VI-plugin.html

  In addition, if the option to increase the size of the disk in the VIC is grayed out, it sounds like a permissions issue.  Finally, you can not extend the disc using the VIC, if the customer in question has a snapshot.

• do I have to buy the new key to run the operating system on a virtual machine personal use? SOS. SOS...

  Hello

  I wanted to run vista on the same computer; but on a virtual machine. I wanted to know if I should buy a seprate key. I was perplexed because it is on the same computer at home. I wanted to use it for personal use as run the operating system on the virtual machine for programs to avoid viruses and use it kind of like a backup. I asked around only to meddle with the answers. Many people need to know the right answer to this question. Oh guys please keep this thread alive for others!

  Thank you

  Jamie

  Hello

  the rules of licensing are:

  One license = Installation and which includes computer

  the vista virtual machine installation will be a second installation requiring a second license of Vista

• Run a Windows command on all virtual machines

  Using PowerCLI, is it possible to run a Windows command on all virtual machines?  I would like to hiberbation disabled on all my servers as it is unnecessary and take up disk space.  Running powercfg-h off will do, but I really want to do it on all 200 of my VM.

  I can't seem to find the option in group policy, so I was hoping that this could be an option.

  The above posts are excellent resolutions. Here is another possible approach.

  You can do this with a Powershell script. Something like this should work:

  1. The list of virtual machines:

  SE connect-ViServer here VCenter server name

  $vms = get - VM

  1. If you have installed Powershell and PSRemoting enabled on each virtual machine, run the following:

  $vms | foreach-object {Invoke-Command - ComputerName $_.} Name - ScriptBlock {powercfg - h}

  1. If you have not installed Powershell and PSRemoting on each virtual machine, use WMI:

  foreach ($vm to $vms)

  {

  $vmName = $vm. Name

  (\[WMIClass\] ")
  (' $vmName\ROOT\CIMV2: Win32_Process "). Create ("cmd /c powercfg - h)

  }

  You should probably use the WMI method since it is unlikely that all of your virtual machines have Powershell installed and configured for remote access.

• Partitions of hard drive on a virtual machine

  Hello

  I have a few questions related to the hard drive on a virtual machine.

  1. is it possible to create multiple hard drive partitions (virtual hard disk, we can add, modify the virtual machine settings) that we have in our PC? In the case the ESX Server and Workstation?

  2. in WMware Workstation by clicking on change settings for virtual machine, I've added an extra IDE drive and allocated 1 GB of space, so now I have two hard drives. I said my virtual machine (Windows XP is the guest operating system), I expected to see the additional drive as "D:", but it was not! What stage is omitted by me?

  Thanks to AdvanceSalahuddin

  1. Yes.  Treat your virtual machine exactly as you would with a physical.

  2. yet once, as you would in a physical installation.  When you add a hard drive, you must go in disk management, select the new drive, create a partition on it and format the partition.

• Support ESXi 5.0 host FC connected tape drives in the virtual machine running symantec backup exec 2012

  Dear Experts,

  We recently purchased C0H19A: StoreEver HP 1/8 G2 6 - LTO Ultrium 6250 CF TapeAutoloader. The purpose is to backup of VMS data, I mean selected data in virtual machines, as for the exchange of data bases email for server accounts database SQL server etc.. We have a full VM backup plan, so using symantec backup exec software.

  We have this configuration:

  -TWO DL 380 Gen8 servers (running UPDATE2 Esxi 5.0), both servers have not all SCSI ports

  -One SINGLE HP P2000 G2 MSA FC Dual Cntrl storage

  -TWO HP SN6000 12 - pt Windows Pwr FC switch

  -HP ADF

  All them above are related to the CF. Symantec backup exec 2012 is also installed on Windows 2008 R2, which is a virtual machine.

  But now, we are unable to see the tape library autoloader through the virtualization layer in the device of machine Manager virtual backup exec. Reading on internet, I also found some details that connected FC tape drives are not supported by the Esxi hosts. We are really stuck in this situation, all the solutions to this. I also read the article from vmware saying configuration for Esxi 4.0 FC tape drives and later versions

  Installation of a physical server windows with Backup Exec 2012 and HBA and connected to above switches FC is the only way to see the ADF? Even after reading articles on the internet, I'm not clear, please guide what solution I have now to get this thing going, I really need to find solution to this.

  Waiting for answers.

  Kind regards

  Hello, I'm a Backup Exec support engineer and yes the method supported is only by connecting the tape drive to a server of physical media. See the introduction in the Backup Exec HCL on Configurations of http://www.symantec.com/docs/TECH175582 and http://www.symantec.com/docs/TECH146293 alternative

• Need help with replacing a drive on a virtual machine

  Test case for something I need to do on a separate production machine.  Virtual MACHINE is running WinSvr2003.  Only the hard disk assigned to the virtual machine is one of 20 GB disk, C: using this.  Need to C: to be larger.  Add a 40 GB drive to the configuration of the VM in the CR.  Started an iso BartPE with plug-in in Ghost.  Ghost can copy the C: 20 GB drive on the 40 GB drive.  Went in the VM config and changed is the 40 GB SCSI 0.1 drive and the drive of 20 GB at SCSI0, 2.  After I saved, VMware changed the 40 GB on disk 1 and the 20 GB on disk 2.  Went it into the BIOS on the machine config to boot the disk of 40 GB.  But no matter how I put it in the BIOS, it would only start on the 20 GB drive.  Went in the VM config and removed the 20 GB drive (which is not an option on the production machine, it has a volume of data on the same drive).  It boots to Windows, so I guess it's start on the 40 GB drive.  But I am unable to connect to it.  It shows that the application of settings, record the settings, then back to the login screen, all within 2 seconds approximately.

  Is there anything else I need to do to (1) move the volume from the Windows system to a new disk w without side effects in Windows and (2) so that it can start on the new disk correctly?

  If it is a single virtual drive with 2 partitions and the C:\ is on the front of the drive, Extpart won't help. It is usually best to separate the partitions to multiple virtual disks. I use the converter to V2V the VM and move on their own virtual disk partitions, then develop them if necessary.

• Adding a new drive on a Virtual Machine

  Hello

  I need to add a new disk to a virtual machine that runs as an Exchange Server.   Normally, when you add the new drive I would choose the store with the Virtiual Machine.  Unfortunetrly the Datasotre stored on the virtual machine is virtually complete.  What are the implications of the selection 'Specify a location' during the creation of the disc.  I'll always be able to use VMotion?  and how the disk get stored on the selected locvation.  He appears as a vmdk file in a folder named after the Virtual Machine?  Anything else I should look for?

  Thanks for any advice.

  Concerning

  Kevan

  You mentioned already correctly more points:

  • the vmdk will be stored in a folder with the name of the virtual machine
  • vMotion is not affected until all guests have access to the data store
  • According to the snapshots the ESXi version are either created in the home folder of the virtual machine (before 5 ESXi) or in the folder parent of vmdk

  André

• Navigate to the bootcamp drive, while the virtual machine is open

  I have VMWare Fusion 3.1, use it on a Windows 7 64-bit bootcamp.

  I need to access my Mac OS player - sometimes even when I run (play?) the merger virtual machine.  The drive disappears from the Finder when it runs.  Can I change this?

  Hello

  No you can't change it.

  A single operating system can directly access a system of files at a time unless it is a clustered file system.

  Like any normal filesystems like NTFS/FAT/etc... are clustered, you cannot do so.

  The answer to that is to share your files via network shares.

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• How can I add a data store as an additional drive for a virtual machine?

  This is probably very simple, but honestly, I'm quite a n00b when it comes to networking and sys. Small business being at low cost...

  OK, I have a HP DL360 G5 running ESXi 3.5 with 2 virtual computer management. The first is a cloned Win 2003 SME (I had to save the last days of server primarily was about to fail), the other is a Win XP VM (which is just share a single file to 6 users)

  The server currently has 2 x 73 GB 10K SAS RAID 1. I installed another drive of 73GB 15K and seen in V: IC, I can add the storage, but how the VM of 2003 to see the new disk space? I need to be added as an extra, (e) disk in this case.

  TBH I don't know even if I added the next Assistant in V: IC correctly except extra storage space.

  Any help will be appreciated

  If the new drive has been formatted as VMFS3, then you can just change the settings of the virtual machine and add a disk.  Specify the new drive as the location for the new virtual hard disk.  You have two options on this screen.  Store with VM or specify the location.  You will need to specify the location.  Then, you can specify any size you want the new E reader to be.  Then in Windows, open disk management to complete the process.

  This will be your easiest route.

  Charles nights, VCP

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Sharing the drive between several virtual machines

  Hi all

  We have a configuration with a SAN (Dell Compellent) and use vSphere 6 to host a number of Windows servers. We now have a giant machine of Windows with a large number of small files for a particular application.

  Now, we would like to create a cluster with a LoadBalancer in front of him, so that we can handle more load. To do this, we want to create a disk that is shared between 2 (or more) of windows machines.

  One of the problems is that NTFS is not a supported clustered file system. So, I did a lot of research on Google to see what my options are. In my opinion, they are the following:

  1. set up a Cluster Shared Volume (CSV) Microsoft (use SMB if I read the documentation)

  2. the user Windows shares on a separate file server

  3. the user NFS (depreacted under Windows)

  4. switch to Linux and use NFS

  The problem I have, is that they use all the network traffic. For example, option 2 is ridiculous slow. NFS under Linux is also a way slower than the local drive (managed by VMWare iSCSI) disk access and NFS on windows does not appear to be

  support very well.

  I know that there are aware filesystems, clustered as VMFS etc. Is there a way to access it directly from my Windows VM or are there devices SAN which is directly accessible from the virtual Windows machine?

  Or maybe there are other solutions to set up a shared drive?

  I know that there are aware filesystems, clustered as VMFS etc. Is there a way to access it directly from my Windows VM or are there devices SAN which is directly accessible from the virtual Windows machine?

  VMFS is a really clustered file system and allow access of multiple virtual machine the same amount of storage (data store) which is different from that to create a virtual disk (hard) and present to multiple virtual machines. You can do this, BUT the guest virtual machine should take care of several accesses to the hard, for Windows, you must turn on the feature... without this clustering with failover data may be corrupted.

  I think the best and supported solution for you is to create another cluster with Failover Cluster functionality and create a resource sharing files with files that will access your NLB nodes.

• Run the script file from a virtual machine

  Hello

  I have a script (c:\script.ps1) I want to run on a virtual machine. Can someone tell me how to do?

  When I want to run the single command on vm I follow these steps:

  > > $cred = get-Credential

  > > Invoke-VMScript - win1 VM - GuestCredential $cred - ScriptText "dir".

  but I don't know how to put the script in a variable so that I can place it after the parameter - ScriptText.

  PS Script is not on the virtual machine, it's on the computer I have installed PowerCLI.

  LucD thanks for help

  I managed to do this way:

  $script = Get-Content - Path C:\script.ps1 | Out-string

  Invoke-VMScript - win1 VM - GuestCredential $cred - $script ScriptText

  without out-String I received the error "failed to convert System.Object [] to the System.String type.

• VMWare Fusion for Mac - how much space HARD drive is my virtual machine taking?

  So, I am running VMWare Fusion on my MacBook Air, and I'm under low HARD disk space.  My Mac storage utility tells me that I have a ton of capacity used in the 'Other' bucket.  According to me, this bucket is where live VMWare Fusion.  As I understand it, technically, my complete operating system of Windows (including all files) is contained in a single file on the Mac side.  Is this correct?  Is it possible to see what capacity takes up my whole Windows Operating System (Virtual Machine)?  I hope this makes sense.  Thanks in advance for your comments!

  -Chill

  ChillOne wrote: as I understand it, technically, my complete operating system of Windows (including all files) is contained in a single file on the Mac side.  Is this correct?

  No, it's not correct!  A Virtual Machine is composed of many files and folders according to how it configured and used.  On a Mac if created natively by VMware Fusion using values by default so all the files that make up a virtual machine are in all of the Virtual Machine that is structurally nothing more then a regular folder except the extension .vmwarevm, it is treated differently by the launch in OS X Services.  Take a look on: work with Virtual Machine packages

  The files that make up the Virtual Machines from Windows/Linux systems and other places my being in simple ordinary folders.

  Is it possible to see what capacity takes up my whole Windows Operating System (Virtual Machine)?

  You can also see statistics for a given Virtual Machine by selecting Virtual Machine in the library because it displays size information, as well as on the General form of a virtual machine; s parameters.  Or look in the Finder and see the release of Get Info for the packaging of the Virtual Machine or the folder that contains the files that make up the Virtual Machine.

• Dual boot MacBook running Win as host, not to run the Mac partition as a virtual machine?

  Sorry if this has been requested a lot of times before, it was difficult to try to sift through responses to this particular configuration through research.

  I have a MacBook which double - start by training camp.  I generally run Windows but do have occasional need to pop in Mac.

  Is there a way to get my Mac running as a virtual machine in Windows partition?  I've seen a lot of discussion of the scenario opposed using Mac and Fusion, but not found on my installation.

  Thanks in advance for any help, especially if it's the ten thousandth time it was requested.

  Within the limits of your question, it is not supported by VMware.  That means that the only product from VMware that supports the legal vitualization of legally virtualisables versions of Mac OS X is VMware Fusion when run under Mac OS X on a Mac to processor Intel.

  In addition, if it's not Mac OS X Server 10.5, 10.6. 10.7 or Client Mac OS X 10.7, so he is not allowed by the Apple ALS and cannot therefore be discussed in these forums without violating the terms of use of the VMware community.