to search the directory names created for export
HelloHow can I query the directories created for the names of the objects data pump export.
Thanx
Ashutosh
dba_directories
Tags: Database
Similar Questions
-
How to check if the directory is created using create or replace directory
Hello
I create a directory like below:
Create or replace directory TEST_DIR AS 'C:\ABCD '.
How to check if the directory is created or not? Is there any request for it?
Thanks in advance.
PKSELECT * FROM ALL_DIRECTORIES WHERE DIRECTORY_NAME LIKE '% TEST_DIR %. "
Published by: user3522507 on 2010.06.16. 07:19
-
Need to find the version number referring to the last name change for each emplid.
emplID Name age Version --- ----- --- -------- 1 ABC 25 2 1 ABC 26 5 1 def 27 9 1 def 28 15 1 def 29 18 2 JKL 15 5 2 MNO 16 8 2 MNO 17 11 2 PQR 18 20 Need to find the version number referring to the last name change for each emplid.
As indicated by the version number change when there is change in age as well, but I need a query that gives the version number referring to the last name change for each emplid.
with
DATA_TABLE (EmplId, Name, Age, version) as
(select 1, 'abc', 25, 2 double Union all
Select 1, 'abc', 26, 5 Union double all the
Select 1, 'def', 27, 9 double Union all
Select 1, 'def', 28, 15 double Union all
Select 1, 'def', 29, 18 double Union all
Select 2, 'jkl', 15 5 Union double all the
Select 2, 'mno', 16, 8 double Union all
Select 2, 'mno', 17, 11 double Union all
Select 2, 'pqr', 18, 20 double
)
Select emplid,
Max (Name) name of Dungeon (dense_rank last order by version).
Max (Age) age of Dungeon (dense_rank last order by version).
version Max (version)
from (select emplid, name, version,)
-case where name! = lag(name,1,name) on (emplid version order partition)
then "renamed".
end change
of data_table
)
where the change is not null
Emplid group
EMPLID NAME AGE VERSION 1 def 27 9 2 PQR 18 20 Concerning
Etbin
-
the things that I create within the trial period can be used for commercial purposes, otherwise if I buy CC who will give me the right to use the things I create for commercial purposes
While there is really no way to stop you using the trial for commercial purposes (and to be honest, it's probably the best way to know if it works for you, in any case) you need to keep in mind that, after the 30 day trial period you will not is no longer able to work the same day or any other project unless you register it.
-
Change the path where Windows search displays directory name
Dear Sir
I'm regularly using Windows search and I am facing some problems with the way the folder names appear.
Imagine the following situation: I have three files, called text.txt, located in the following directories:
D:\Folder_A\SubFolder_1
D:\Folder_A\SubFolder_2
D:\Folder_B\SubFolder_1
When I launch a Windows search to find these files, I will get answers in the column 'file ':
SubFolder_1 (D:\Folder_A)
SubFolder_2 (D:\Folder_A)
SubFolder_1 (D:\Folder_B)
When I then click on the "Folder" column header to sort, I will get following result:
SubFolder_1 (D:\Folder_A)
SubFolder_1 (D:\Folder_B)
SubFolder_2 (D:\Folder_A)
This way of sorting mix main directories "D:\Folder_A" and "D:\Folder_B", which is false.
This problem is due to the fact that the names of directories are not displayed as '
' but as ' ( )", which is not what I want. Is it possible (as a registry key) where I can configure my Windows 7 to display the names of directory as '
' (as in previous versions of Windows)? Thank you
Right-click a column header and choose "More"... "since the menu drop down.
In the choice, find the path and turn it on. When you click OK, the new column 'path' will be the one you like (showing the full path). Example:
-
Change the Directory Structure created in the MPZIP file
I'm trying to normalize my projects of Multisim for inclusion in our documentation control system. As I build my project, I have a directory structure that I use. When I include the files in the project, the directory structure is known in the MPZIP file. However, the default value is decompress all the files in the external folder (name of the project). Suite to help,
Hi Doug,.
When you unpack the project, the default is to create a new folder and put it all together because it is unlikely that the new computer will have the same file structure as the computer on which this project of. If you want Multisim to create the same structure as the original file, you can click in the cell under "excerpt from path" and select the old path, if the folder does not exist, Multisim will create a. Unfortunately, you will need to do this for each item on the table.
-
We must control the newspapers written in verse a directory. This directory name changes every day.
Your help is highly appreciated
Concerning
Laetitia
Hello George,.
We rely on the LogFilter agent to monitor files that reside in the bearing of the directories. If you deploy this agent and then change the properties, so that you will see an entry for check Log - 1 way and especially in your case a selection check the Log - 1 subdirectories. If you do this, Yes, then the search will be for the last file-day although there are in the subdirectories.
Otherwise said, in your case go back a directory and search for the particular file name and the LogFilter will search for the sub - directories and find the most recent, even if file name your directories to change names every day.
-
Remove the file name characters when exporting to file
Hi all
I worked with Silly-V , which has been extremely useful in creating a script to automate creating files in Illustrator.
What I need help with now is the ability to add in this script, the ability to remove "x #" character of a filename on export. This would be ideal, as it will completely automate what I did by hand for months.
The current script, that we have put in place takes generally, which would take me about 1 minute per file and it has reduced to 10 seconds. Translate this in the whole of the need to treat roughly 800-1 000 files, and you can see where the time invested is decreased significantly.
The last piece of the puzzle is the removal of characters from ONE of the two files that are created through this script.
First of all, this is the current script. It seems to work perfectly for what I ask it to do.
#target illustrator-19 function test(){ var folder_1 = Folder("~/Desktop/Header CAD"); var folder_2 = Folder("~/Desktop/Clean CAD"); app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS; function revealAllLayers(doc) { for (var i = doc.layers.length - 1; i >= 0; i--) { doc.layers[i].visible = true; } }; function hideLayer(doc, name) { doc.layers.getByName(name).visible = false; }; function exportMyPng(dest, doc, props) { if(props.hasOwnProperty("antiAliasing")){ switch(props.antiAliasing){ case "ARTOPTIMIZED" : { app.preferences.setIntegerPreference("plugin/PNGFileFormat/AntiAlias", 1); break; } default : { break; } } } var pngOpts = new ImageCaptureOptions(); pngOpts.antiAliasing = true; for (var all in props) { if (pngOpts.hasOwnProperty(all) && all != "antiAliasing") { pngOpts[all] = props[all]; } } doc.imageCapture(File(dest + "/" + doc.name.replace(/\.\w+$/, props.extraStuff + ".png")), doc.visibleBounds, pngOpts); }; var doc = app.activeDocument; revealAllLayers(doc); hideLayer(doc, "Materials"); hideLayer(doc, "Detail Artwork"); exportMyPng(folder_1, doc, { transparency: false, antiAliasing: "ARTOPTIMIZED", resolution: 300, extraStuff: "_header" }); hideLayer(doc, "Header"); exportMyPng(folder_2, doc, { transparency: false, antiAliasing: "ARTOPTIMIZED", resolution: 300, extraStuff: "" }); app.activeDocument.close(SaveOptions.DONOTSAVECHANGES); }; test(); test();
I found the program Name Mangler done an exceptional job of the completion of the task of renaming. Here's a screenshot of what I'm asking for looks like with this program.
My ultimate goal is to be able to integrate this unique Name Mangler feature the existing script I posted above. Now, the problem is that I need ONLY to assign the file created by the section of the lines 66-71. As you can see, I need to remove the file name starting at the index of 14 characters.
Is it possible and something that anyone can help with?
Thank you in advance!
Brooks
Whew busy days!
Well, I got this here:
#target illustrator function test(){ var folder_1 = Folder("~/Desktop/Header CAD"); var folder_2 = Folder("~/Desktop/Clean CAD"); app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS; function revealAllLayers(doc) { for (var i = doc.layers.length - 1; i >= 0; i--) { doc.layers[i].visible = true; } }; function hideLayer(doc, name) { doc.layers.getByName(name).visible = false; }; function exportMyPng(dest, doc, props) { if(props.hasOwnProperty("antiAliasing")){ switch(props.antiAliasing){ case "ARTOPTIMIZED" : { app.preferences.setIntegerPreference("plugin/PNGFileFormat/AntiAlias", 1); break; } default : { break; } } } var pngOpts = new ImageCaptureOptions(); pngOpts.antiAliasing = true; for (var all in props) { if (pngOpts.hasOwnProperty(all) && all != "antiAliasing") { pngOpts[all] = props[all]; } } doc.imageCapture(File(dest + "/" + doc.name.replace(/\.\w+$/, props.extraStuff + ".png").substr(props.charsOffStart)), doc.visibleBounds, pngOpts); }; var doc = app.activeDocument; revealAllLayers(doc); hideLayer(doc, "Materials"); hideLayer(doc, "Detail Artwork"); exportMyPng(folder_1, doc, { transparency: false, antiAliasing: "ARTOPTIMIZED", resolution: 300, extraStuff: "_header", charsOffStart: 0 }); hideLayer(doc, "Header"); exportMyPng(folder_2, doc, { transparency: false, antiAliasing: "ARTOPTIMIZED", resolution: 300, extraStuff: "", charsOffStart: 14 }); app.activeDocument.close(SaveOptions.DONOTSAVECHANGES); }; test();
This one has a new parameter "charsOffStart" that you have to stick in your two-functions for the economy, and it will be lop however much from character now!
-
The directory name is incorrect
I got a bad virus some time ago and after I got to dissolving a ton of weird stuff that happened as I can't install new programs I get the error "directory name is invalid" when I try to run the application to install.
If necessary, do all the work with Malwarebytes in Safe Mode with network.
To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In my 1st answer, there is a link for access to the logs for SFC.
And for the installation of repair, you will need to borrow a DVD of Microsoft Vista.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also some info on the factory settings:
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
Add the short name field for specifications in the XSL file
Hello
I'm looking for help to see if it is possible to add the short name for the inputs and spare field in a specification of Formulation in the XSL file. If it is possible, how can I do this?
Thanks in advance.
Well, CSS is much more locked, by design. So it's a little (or maybe a lot) more complicated.
Also remember that if you change the CSS schema, and you use the web service contract that we provide for the CSS message, then the approach will probably be different. This means that the web service contract would not support additional XML nodes, unless he expects them.
If you do not use our web service contract, then you could make changes in the XML in a different way. Can you elaborate on how you receive the message in CSS?
Basically, if you use the web service method, then you will probably need to use the ExportExtensions method, which is documented in the CSS guide. ExportExtensions allows you to include xml code in a node specific extensibility through managers, which are classes that you configure in the config\extensions\exportExtensions.xml configuration file. It is currently the custom how sections are included in syndication. So you can add your own XML nodes and call you a custom class to provide additional data that you need.
-
How to the best Setup project for export to many formats
I'm about to start editing a wedding video but just realized I intend for the video to be viewed on many different media and display types. I wonder what the best way is to configure my project to be able to export all the different formats and to get the best possible quality for each of the formats? The video source is AVCHD 1080i (1920 x 1080 60 frames per second interlaced) I wish that my final project in all of the following formats (all 16:9):
Blu - ray 1080i60
Blu - ray 720 p 60
1080 p 30 (for playback on projector connected to the computer)
DVD NTSC (I think to 480 p or should I use 480i?)
DVD PAL (576i or 576 p?)
Should what format I configure my project? How then would export to other formats? How to deal with interlaced to progressive conversion? Thanks for any help you can offer.
Use the format that fits your video... so the formats of all your AVCHD export full which is 1920 x 1080, are the same resolution or less... they can be exported from your project. You can deal with the export formats progressive in deinterlacing the video on the timeline and using the Progressive 'None,' option accessed from the advanced options in the export field window.
-
Hide the domain name PIA for the outside world
I have an architecture where I encouraged candidates on the external Internet to the intranet.
The architecture is-
Internet https> Apache http> Weblogic-> server-> DB applications
I use the domain name on the link to access the site:
http:// < site > .com/PSC/ < domain_name > / applicant, HRMS, c, HRS_HRAM. HRS_CE. GBL
I don't want the domain name "< real domain_name >" to appear in the URL. How the mask/hide it?It is a request of my client and I was wondering if this is possible. Please advice.
THX/t -
There are a lot of answers for Mac and Windows 7-8, but none that I can find for Windows 10. It is not let me save for Web and I get the message, which is in the title of this discussion. I tried to reinstall it. I tried pressing Ctrl + Alt + Shift, did not work. I know this is probably a registry problem, anyone got any ideas?
Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
The worksheet name change for the interactive user role
Hi all
I have a question about DRM security for users with access add to the sheet and only read access to the members. The requirement is that the user should be able to add a sheet and change all the properties associated with the leaves but cannot add or change the Member or any property associated with a branch. To do this, I created a group of node (NAG1) and assigned categories of goods (PC1) associated with the hierarchy of the NAG1 with editing access to PC1. The NAG1 for journal access ADD and NAG1 for branch had read access. The user has only one role which is the interactive user. This way, the user cannot add spreadsheets, edit the properties associated with the leaves, but don't can't add limb or change all the properties associated with limb, HOWEVER, the user is not able to change the name of an existing journal. If I give the user role 'Director of Application', while they are able to change the name of the system, but then they see the section Administration on the left and everything related which we want give...
Is it possible to give the user the ability to change the name of the worksheet without giving ""Application Administrator ' role? "
Thanks in advance
Sumit
Have you checked RenameLeaf and RenameLimb system preferences? I think that by default, only the administrator can change the name of the node, but you can grant this possibility of additional roles.
-
Copy of the albums self-created for iPhone does not work
I created an album with titles in * mp3 on a CD format and I would like to copy on my iPhone-6 attached via the USB cable to my PC. I can hear fine titles with iTunes. When you press the left button of the mouse on the album icon and moving the album in the top left corner, my iPhone appears but is not framed, as well as the album cannot be copied to the iPhone. To my knowledge, it has worked perfectly so far. I have iTunes - 12.3.2.25 on a PC with Windows-10. Any suggestions? Thanks in advance,
M Hans
This problem occurred after a new installation of iTunes on a new computer. After a conversation with Apple's Support, I put into iTunes for iPhone attached "v sync music", "* selected lists, interpreters, albums. Eventually I could copy the Album to the iPhone without any problem.
Maybe you are looking for
-
Left Handed orientation in Yoga book
If looking for left-handed use in Draw mode, the screen will refocus itself to that effect? I guess so, but not sure. Thank you.
-
I implement this converter boost switched capacitor circuit having problem. How can I vary the duty cycle in this circuit more Vbe of two transistors have also vary, but there is no option in components values please help.especially duty cycle.
-
XP SP3 start/programs is empty after cleaning a Trojan infection
Windows XP SP3, all updates. After cleaning a Trojan horse infections now start/programs shows 'Empty' and all the quick start icons are shown is no longer. Y at - it an easy solution for this in addition to repair or reinstall windows? Have checke
-
Cannot associate .bkf after a backup on external hard drive
I am running Windows XP Home edition. I downloaded my Windows CD backup. I backed up my files to an external drive. It took 40 minutes, so I'm pretty sure they did backup. I can't access the files as it says they are .bkf files and have no associatio
-
Every day, without fail, I get a notification saying to transfer data. From what I understand (be illiterate technicallly), I have not much to transfer. It's my head. What can I do to stop this notification popping up all the time?