Tomcat 6 stop running during execution of Oracle XE

Similar Questions

• Error during execution of Oracle model appearance shape - (LAF_TEMPLATE)

  Version of forms 10.1.2.3
  JRE version 1.6.0_30
  Windows XP operating system
  
  
  I am trying to Setup oracle project aspect on my local machine.
  For this, I upgraded forms to 10.1.2.3, then I applied way too don't * 9593176 * (but not yet completed the steps related to jacob and webutil).
  
  Problem: when I run the model form of Oracle appearance it comes up with an error message. *
  
  Version forms cmdlet is: 10.1.2.3
  Exception in thread "thread of applet - oracle.forms.engine.Main - 1 ' java.lang.NoSuchMethodError: oracle.forms.handler.IHandler.getApplet (Ljava/applet/Applet);
  at oracle.forms.fd.DrawLAF.init(DrawLAF.java:285)
  at oracle.forms.handler.UICommon.instantiate (unknown Source)
  at oracle.forms.handler.UICommon.onCreate (unknown Source)
  at oracle.forms.handler.JavaContainer.onCreate (unknown Source)
  at oracle.forms.engine.Runform.onCreateHandler (unknown Source)
  at oracle.forms.engine.Runform.processMessage (unknown Source)
  at oracle.forms.engine.Runform.processSet (unknown Source)
  at oracle.forms.engine.Runform.onMessageReal (unknown Source)
  at oracle.forms.engine.Runform.onMessage (unknown Source)
  at oracle.forms.engine.Runform.sendInitialMessage (unknown Source)
  at oracle.forms.engine.Runform.startRunform (unknown Source)
  at oracle.forms.engine.Main.createRunform (unknown Source)
  at oracle.forms.engine.Main.start (unknown Source)
  to sun.plugin2.applet.Plugin2Manager$ AppletExecutionRunnable.run (unknown Source)
  at java.lang.Thread.run (unknown Source)

  Hello

  I've spent a lot of time to indicate each time I have that you don't have to ask questions about the forces armed Lebanese this forum. You have two other locations, a dedicated e-mail and a dedicated forum.

  At first glance, it seems that you have not used the laf_10123.jar in your tag archive.

  Thank you

  François

• Can I create multiple dynamic entries during execution?

  Can I create multiple dynamic entries during execution?
  
  Oracle 11g
  Request Express 4.0.2.00.06
  
  Here's my problem:
  We have a table that contains metadata about the files (paper or electronic).
  We hope that we can need more columns in the table at some point and do not want to change the table or the application.
  
  So to do this I would like to create:
  
  A table called TBL_FILE with columns:
  NUMBER of TBL_FILE_ID (this will be the primary key)
  TBL_FILE_NAME VARCHAR2 (1000) (this will be the name of the file)
  
  A second table will be called TBL_FILE_META with columns:
  NUMBER of TBL_META_ID (this will be the primary key)
  NUMBER of TBL_FILE_ID (this will be the key to forign to the files table)
  TBL_META_COLUMN VARCHAR2 (30) (this is what would be the name of the column if it existed in TBL_FILE)
  TBL_META_VALUE VARCHAR2 (1000) (this is the value of this record and the column "would be")
  
  If a person can have as many meta data in the file to add columns to the table.
  The problem is how can I allow users to add as much data as they wish with them having to re develop page.
  
  Other things to note is that we would like this be on one page.
  I know how to add we can create inserts several rows using a SQL (editable report).
  However the TBL_META_VALUE in the TBL_FILE_META column will sometimes be a selection list and other times one text box or a numeric field.
  So I don't see now a SQL (editable report) would work for this and I can't create a table of elements on the page running I can?
  
  No idea how I might accomplish this? Is there a better way to do this?
  
  It is a term or a name for what I'm doing by creating these "virtual" columns in another table?
  I found this method looking at the workflow tables Oracles.

  Welcome to the Oracle Forums!
  >
  Can I create multiple dynamic entries during execution?

  Oracle 11g
  Request Express 4.0.2.00.06

  Here's my problem:
  We have a table that contains metadata about the files (paper or electronic).
  We hope that we can need more columns in the table at some point and do not want to change the table or the application.

  So to do this I would like to create:

  A table called TBL_FILE with columns:
  NUMBER of TBL_FILE_ID (this will be the primary key)
  TBL_FILE_NAME VARCHAR2 (1000) (this will be the name of the file)

  A second table will be called TBL_FILE_META with columns:
  NUMBER of TBL_META_ID (this will be the primary key)
  NUMBER of TBL_FILE_ID (this will be the key to forign to the files table)
  TBL_META_COLUMN VARCHAR2 (30) (this is what would be the name of the column if it existed in TBL_FILE)
  TBL_META_VALUE VARCHAR2 (1000) (this is the value of this record and the column "would be")

  If a person can have as many meta data in the file to add columns to the table.
  The problem is how can I allow users to add as much data as they wish with them having to re develop page.
  >
  Creation of dynamic Page elements is not available. You must create surplus items and hide/show, etc. But you cannot change the element Type. Overall, too many restrictions in this approach.
  >
  Other things to note is that we would like this be on one page.
  >
  The limit of 100 points will hit you if you go with extra page element. With the form of tables that should not be a limitation, unless you're exceeding the limit of 50 APEX_APPLICATION point. G_Fnn points and limitation of the 60 column of the region report with "(analyze the query executing only) use generic name column" in the dynamic region.
  >
  I know how to add we can create inserts several rows using a SQL (editable report).
  However the TBL_META_VALUE in the TBL_FILE_META column will sometimes be a selection list and other times one text box or a numeric field.
  >
  If the type if the item is variable, that doesn't mean that you have to type a way to store the item. Metadata of meta data.
  >
  So I don't see now a SQL (editable report) would work for this and I can't create a table of elements on the page running I can?
  >
  Yes, you can do it. Update report / query in a table can be built from the metadata using the SQL query that returns the PL/SQL function . It will be a bit of coding in PL/SQL where you use metadata and metadata of Meta data to restore your SELECTION with the right APEX_ITEMs. He might have a decrease in performance associated with it, but it will not be a serious degradation.
  >
  No idea how I might accomplish this? Is there a better way to do this?

  It is a term or a name for what I'm doing by creating these "virtual" columns in another table?
  I found this method looking at the workflow tables Oracles.
  >
  I guess it's just a good TNF. This is the master model / retail Design, sounding more modern? ;)

  Kind regards

• I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  As I had not heard of you, I tried to 'cut' of this folder and pasted into a folder, I called "temptemp" in the same root fodler lacation, (not in the original file). Run the program and it gave me the same error and closed again.  Any help now?

• process Oracle run during installation

  Hi all
  
  I want to know what are all the processes that are running during the installation of oracle database.
  
  
  BR
  Sphinx

  It creates a file pfile
  It creates the database
  He started the database
  It adds some tablespaces and additional files
  It creates the data dictionary
  It installs (if requested) sample schemas
  It installs and configures other options (if requested)

  These are the things that come to mind (about DBCA)

• modify VI during execution

  Dear users of LabView,

  I have a fairly general question about the development of a project, which requires a continuous control of the material. To be more precise, I develop LabView control and DAQ software for calorimeters in high volume in the last 2 years. Such a system requires several PID controls, and it has many subsystems. Because of the large heat capacity, it takes about 3-4 days to launch the system. So if I need to edit for example something in control of the final of a specific subsystem, I stop the LabView code, I have change the specific part, I restart the system, I wait for 3 days, and then I can see the result of my changes.

  My question is the sort of General: what is the good, let's say "best practice" to avoid such a dead time?

  Is it possible to change a VI during execution?

  I understand that if I run the independent screw, that dealing with subsystems, I could avoid this problem. But if I already have a compact 'main' VI, including all the subVIs, what can I do?

  It would be nice to have a sort of "hot swapping" feature in LabView, so during the execution of main VI of my project, I could change the Subvi that I want, and when it is ready to activate, the runtime would swap with the old version.

  Thanks for the tips and advice!

  Best wishes

  Hello

  It all depends on how works your vi...

  The only way I see is to use dynamic calls: a vi called dynamically is editable even if appellant vi is running.

  If you change the callee until the caller calls the vi vi.

  Is how the appellant under vi (this includes the values of connectors and run the VI):

  

  Best regards

• change the frequency of the signal during execution

  Hi, I'm working on a VI to calculate excess of signal I think VI seems to be good (not sure) but now my problem is

  change the frequency during execution, which I am not able to do only when I stop and run the vi frequency changes... pls

  someone help me I tried to put in an event... but no use... maybe iam missing something pls help me...

  I noticed that you have some time a loop around the entire block diagram - I'm not entirely sure why that is.  The way you have your VI wrote that the two inner loops will never come out unless there is an error-'stop' buttons are hidden.  Thus, the outer loop is not do anything for you.

  Once you take it, it is easy to see why you cannot change frequency.  It is defined once, outside of the loops and so never gets checked again.  The best way to resolve this, in your case, is to use registers with shift on the upper loop and check if the value of the frequency has changed since the last iteration.  If so, generate a new waveform and feed DAQmx writing instead.

  See the version annexed to your main VI for what I mean.  (I also replaced the controls to stop with one that is visible and which will stop the two loops without your duty to hit the button abandon.) I'm also an error on the DAQmx read in the loop at the bottom, but I'm sure it will work fine on your equipment.

  See you soon,.

  Michael

• Problem with pl/sql procedure, trying to get the value of the user during execution

  Hello

  Using oracle 11.2.0.3

  Can run sql that gets the value of the user during the fine workmanship and also via an anonymous block.

  uses of SQL & Enter_Product_Number

  anonymous block using: Enter_Product_number.

  However, get problems when trying to create a pl/sql procedure, use one of the above

  relevant below tried code part & and: buit works do not error, try bad bind variable if used: and ora-600 if try use &.

  How can we have a procedure from pl/sql that can call and receives a value of user during execution?

  Only way around what I can think of is to pass parameters to the procedure

  Thank you

  create or replace procedure ins_into_issues is

  v_nd_rec_cnt number (10);

  v_normal_rec_cnt number (10);

  Start

  Select count (*)

  in v_nd_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & old_nd_product_number;

  Select count (*)

  in v_normal_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & normal_product_number;

  -code below commented above works.

  end;

  Hello

  what something like this:

  create or replace procedure INS_INTO_ISSUES ( in_normal number, in_old number )  is
    v_nd_rec_cnt     number(10);
    v_normal_rec_cnt number(10);
  begin
      select count(*)
        into v_nd_rec_cnt
       from refmast.issues i
       where i.iss_product_num = in_old;
    --
      select count(*)
        into v_normal_rec_cnt
        from refmast.issues i
       where i.iss_product_num = in_normal;
  end;
  

  concerning

  Kay

• ORA-01017 encountered during execution of shell scripts

  Hello
  
  During execution of the backup script for one of my databases, the script contains a login section which breaks down as shown below
  
  Section login script:
  
  sqlplus / < < END > /tmp/$PROGRAM.tmp
  
  
  Error generatedf in the log file:
  
  SQL * more: Production release 11.2.0.3.0 on sea Apr 10 11:32:06 2013
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  Two points to note:
  1) there are two other databases on the same server and they have no problem
  (2) I am able to connect to this database as ' / '.
  (3) I am able to connect to the database as sysdba from another server
  (4) the script runs successfully when I change like: sqlplus / as sysdba < < END > /tmp/$PROGRAM.tmp

  Hi, for the use of this you must create a user authenticated externally then it will work... Check other databases where you are using the sqlplus / connection for your refrence command

• ORA - 06502:numeric or of value errORA-04088: error during execution of trigger

  I received the following error message by entering a number in the maximum value (i.e. 9 999 999.) allowed in a data entry form that is distinct from the basic form:
  
  ORA-06502: PL/SQL: digital or error number precision value: ORA-06512 too big: "< owner >. < trigger >", line 194 ORA-04088: error during execution of trigger '< owner >. < trigger >.
  
  Where < owner > is the schema name and < Trigger > is the name of the trigger. The block of data in the application for participation is based on a database table, and the sum of all the values entered (with a maximum value of 99.999.999.) appears in the form of Basic. A grand total of this amount along w / other totals on the basic shape is also displayed with a maximum value defined as 999 999 999. Only, I get the above error message when the total is greater than 99999999. If the total is less than or equal to 99.999.999, the basic form works very well. Why?
  
  I checked all the attributes of the database columns and form fields and everything seems to be okay, and I'm out of my mind. I desperately need your help to solve this problem quickly because the pressure is on...
  
  Thanks in advance for any help.

  Orchid says:
  Hello Hamid,

  Thanks for your help. Yes, it works as suggested, after that I have increased the length of NUMBER data base table column (9) to NUMBER (11).

  gives you the correct answer, and you don't mark it ;)

  >

  Apparently, Oracle database truncates the decimal points and only update the value of 9 digits without giving errors, but the form of Oracle application is more picky and it generates forms and Oracle error messages when you run the application. It seems that there is a difference when executing the sql commands in the Oracle database and execution of these Oracle Forms application controls. Do you agree?

  Yes

  Thanks again for all the help.

  You can only give reward for it by checking the useful and correct answer.

• With the help of a snapshot or a clone of LUN replicated during execution of an RP

  Hello

  MRS. "tutorials" for MRS 1.0 indicates that when you run an RP, replicated Lun become the primary LUNS and snapshots or clones are NOT used.

  I want to use a snapshot of the LUN being replicated even when running (IE do not stable) a recovery plan.  This is because if for some reason any recovery fails and data is corrupted during the recovery process, I still have replicated original LUNS to fall back on.

  Is it possible to use a snapshot or a clone of LUNS replicated during execution of an RP (as is the case when you TEST a RP)?

  What is a characteristic of the RS 4?  Does depend on case by case basis on the SRA installed?  Or it is absolutely NOT possible with RS 4?

  Concerning

  Alfar

  SRM is has visibility into the storage (by the SRA) Bay, is not possible to "trick" it and give it captures instant instead of the LUN.

  During the failover SRM breaks replication and promotes the LUN, so I don't see how you can stop the process.

  Optionally, you can take a glance to the replica LUNS before begins the failover process.

• How to disable the close button during execution

  Hello world.
  
  Please help me how to disable the close button at the top of the window during execution. I don't want the user to use this button to close. I used the button called out in this form but sometimes users of closing by clicking this button.
  
  I use the formula of Oracle 10 g R1.
  
  Thanks in advance,

  Or if you want to stop the closing by button close the main WINDOW. Then create a trigger on called KEY-OUTPUT at the FORM LEVEL and just write the value NULL ex.

  Trigger = KEY-EXIT (FORM-LEVEL)
  NULL;
  

  -Clément

• Error during execution of the event handler

  Hello
  
  I've implemented a before update event handler (made sure the name is true, the package is right, file loaded on the server, the java code compiled in jdeveloper) but had this error during execution. -What this means and how can I solve this problem?
  
  Thank you
  
  ERROR, 4 June 2009 17:25:32, 701, [XELLERATE. SERVER], class/method: tcDataObj/eventPreUpdate some problems: Event handler com.oracle.events.UcdCheckAndSetSponUserExpDate has no name assignedjava.lang.RuntimeException: Event handler com.oracle.events.UcdCheckAndSetSponUserExpDate has no name assigned
  at com.thortech.xl.client.events.tcBaseEvent.run (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.runEvent (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.eventPreUpdate (unknown Source)
  at com.thortech.xl.dataobj.tcUSR.eventPreUpdate (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.update (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.save (unknown Source)
  at com.thortech.xl.dataobj.tcTableDataObj.save (unknown Source)
  at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData (unknown Source)

  In your constructor did you set the name of the event handler?

  Something like:

  setEventName("Enter-a-name-here");

  Best regards
  / Martin

• masking steps during execution

  I have a sous-suite that I point the user to when asked to isolate a card failure.  To give them some flexibility, I got a popup that gives them a certain number of options (see attachment).  I have an m.o. that indicates the individual steps these select/run (i.e. '1' or '3' in the png).  Control flow (denoted by '2') is the noise they don't really need to worry and may / will cause confusion (and possibly problems for me if they select them accidentally).  Is there a way to hide these measures flow during execution control so that the user sees '1' and '2' (and other similar 'valid' selections?

  If there wasn't a need explicit to have the flow control logic, then I'd be tempted to compact all in the post of the Popup Message action.

  

  By setting the Popup Message Action to go to the step, , use Custom Condition (TRUE):

  

  And by using the following Expression:

  Step.Result.ButtonHit == 1? RunState.Sequence.Main ["MR_RPack_R55"]. UniqueStepId:
  
  Step.Result.ButtonHit == 2? "" "RunState.Sequence.Main ["End_PCI_Isolation"]." UniqueStepId:
  
  Step.Result.ButtonHit is 3? RunState.Sequence.Main ["MR_R103"]. UniqueStepId:
  
  Step.Result.ButtonHit is 4? "" "RunState.Sequence.Main ["PCI_Intf_PT"]." UniqueStepId: «»

  It should be appropriate level following the Popup Message.

  (SequenceFile attached).

  I hope this helps.

  Charlie

• Why get error during execution the FPGA VI?

  Hello world

  I have a lot of sense of wrong during execution of a program that has been correctly executed previously. I don't know what I did wrong.

  Now, whenever I run this FPGA VI, I get an error (in the attachment). And, then runs the FPGA VI, but it does not give the data required those he supposed to give as output.

  Any help or recommendations would be appreciated also.

  Thank you.

  Hi auree123,

  There are a few reasons for this error
  may occur.  Could you tell us more about what's going on?

  You are
  I get this error when you compile and if so, at what stage?

  It looks like
  as you may be running it in Interactive Mode, which means that you are viewing
  the front of the FPGA VI on the development computer that you are running - is
  that correct?  If so, you could try to create a VI on your host
  Open a FPGA reference and communicate with the FPGA programmatically rather than interactively.

  Thank you

  Morgan S

  Technical sales engineer