Error during execution of Oracle model appearance shape - (LAF_TEMPLATE)

Similar Questions

• ORA - 06502:numeric or of value errORA-04088: error during execution of trigger

  I received the following error message by entering a number in the maximum value (i.e. 9 999 999.) allowed in a data entry form that is distinct from the basic form:
  
  ORA-06502: PL/SQL: digital or error number precision value: ORA-06512 too big: "< owner >. < trigger >", line 194 ORA-04088: error during execution of trigger '< owner >. < trigger >.
  
  Where < owner > is the schema name and < Trigger > is the name of the trigger. The block of data in the application for participation is based on a database table, and the sum of all the values entered (with a maximum value of 99.999.999.) appears in the form of Basic. A grand total of this amount along w / other totals on the basic shape is also displayed with a maximum value defined as 999 999 999. Only, I get the above error message when the total is greater than 99999999. If the total is less than or equal to 99.999.999, the basic form works very well. Why?
  
  I checked all the attributes of the database columns and form fields and everything seems to be okay, and I'm out of my mind. I desperately need your help to solve this problem quickly because the pressure is on...
  
  Thanks in advance for any help.

  Orchid says:
  Hello Hamid,

  Thanks for your help. Yes, it works as suggested, after that I have increased the length of NUMBER data base table column (9) to NUMBER (11).

  gives you the correct answer, and you don't mark it ;)

  >

  Apparently, Oracle database truncates the decimal points and only update the value of 9 digits without giving errors, but the form of Oracle application is more picky and it generates forms and Oracle error messages when you run the application. It seems that there is a difference when executing the sql commands in the Oracle database and execution of these Oracle Forms application controls. Do you agree?

  Yes

  Thanks again for all the help.

  You can only give reward for it by checking the useful and correct answer.

• ORA-04088: error during execution of trigger ' SYSTEM. SET_CURRENT_SCHEMA_PM'

  Hello
  10 g R2 on Win 2008 Server DBSNMP can not connect:

  sqlplus dbsnmp@MYDB
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Wed Aug 18 07:35:19 2010
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  Enter password:
  ERROR:
  ORA-04088: error during execution of trigger 'SYSTEM.SET_CURRENT_SCHEMA_PM'
  ORA-01403: no data found
  ORA-06512: at line 5

  But I have:

  SQL> select username from dba_users where username like '%DBSNMP%';
  
  USERNAME
  ------------------------------
  DBSNMP
  
  SQL> grant connect to dbsnmp;
  
  Grant succeeded.

  What could be the problem?
  Thank you.

  First of all investigate what is this trigger as below

  select TEXT from dba_source
  where NAME='SET_CURRENT_SCHEMA_PM' and type='TRIGGER'
  and owner='SYSTEM'
  

  You can also disable this trigger, then try to connect again.

  alter trigger SYSTEM.SET_CURRENT_SCHEMA_PM disable
  

• Error during execution of the event handler

  Hello
  
  I've implemented a before update event handler (made sure the name is true, the package is right, file loaded on the server, the java code compiled in jdeveloper) but had this error during execution. -What this means and how can I solve this problem?
  
  Thank you
  
  ERROR, 4 June 2009 17:25:32, 701, [XELLERATE. SERVER], class/method: tcDataObj/eventPreUpdate some problems: Event handler com.oracle.events.UcdCheckAndSetSponUserExpDate has no name assignedjava.lang.RuntimeException: Event handler com.oracle.events.UcdCheckAndSetSponUserExpDate has no name assigned
  at com.thortech.xl.client.events.tcBaseEvent.run (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.runEvent (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.eventPreUpdate (unknown Source)
  at com.thortech.xl.dataobj.tcUSR.eventPreUpdate (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.update (unknown Source)
  at com.thortech.xl.dataobj.tcDataObj.save (unknown Source)
  at com.thortech.xl.dataobj.tcTableDataObj.save (unknown Source)
  at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData (unknown Source)

  In your constructor did you set the name of the event handler?

  Something like:

  setEventName("Enter-a-name-here");

  Best regards
  / Martin

• Why get error during execution the FPGA VI?

  Hello world

  I have a lot of sense of wrong during execution of a program that has been correctly executed previously. I don't know what I did wrong.

  Now, whenever I run this FPGA VI, I get an error (in the attachment). And, then runs the FPGA VI, but it does not give the data required those he supposed to give as output.

  Any help or recommendations would be appreciated also.

  Thank you.

  Hi auree123,

  There are a few reasons for this error
  may occur.  Could you tell us more about what's going on?

  You are
  I get this error when you compile and if so, at what stage?

  It looks like
  as you may be running it in Interactive Mode, which means that you are viewing
  the front of the FPGA VI on the development computer that you are running - is
  that correct?  If so, you could try to create a VI on your host
  Open a FPGA reference and communicate with the FPGA programmatically rather than interactively.

  Thank you

  Morgan S

  Technical sales engineer

• Error during execution of Setup to upgrade to 9.2.0.4

  Hello
  
  I tried to update my 9.2.0.1 to 9.2.0.4 database.
  
  Following the article "Oracle9i Database Patch Set Notes Release 9.2.0.4.
  
  When I try to run the installer for the game Patch, I get this error:
  
  
  Machine virtual /u01/oracle/Disk1/./stage/Components/oracle.swd.jre/1.3.1.0.0a/1/DataFiles/Expanded/jre/aix/jre/bin/java to initialize Java. Please wait...
  Exception in thread "main" java.lang.InternalError: can't connect to X 11 window server using '2.0 "as the value of the DISPLAY variable.'
  at sun.awt.X11GraphicsEnvironment.initDisplay (Native Method)
  to sun.awt.X11GraphicsEnvironment. < clinit > (X11GraphicsEnvironment.java:77)
  at java.lang.Class.forName1 (Native Method)
  at java.lang.Class.forName(Class.java:142)
  at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:72)
  java.awt.Window. < init > (Window.java:202)
  java.awt.Window. < init > (Window.java:244)
  in java.awt.Frame. < init > (Frame.java:329)
  in java.awt.Frame. < init > (Frame.java:276)
  at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:593)
  
  
  Although I exported the number 2 display: DISPLAY = 2 #export
  
  and Google search for a possible solution, I did the following with no luck:
  
  $DISPLAY =: 2.0
  $ export DISPLAY
  $ xhost +.
  
  
  I use the cygwin to access the graphical interface of the operating system.
  
  Any help?
  
  
  Thank you.

  PL see if MOS Doc 567004.1 (java.lang.InternalError: can't connect to X 11 window server using the DISPLAY variable) can help

  HTH
  Srini

• Error during execution of Prod Interface

  Hi all

  We moved our project ODI of Dev to prod. and configured physical Arcitecture from production. Connections tested with success. But during the execution of the interface, we receive some error like below.

  STEP: Drop target about databaselink

  ORA-02024: database link not found

  STEP: Create a database on the target link

  ORA-01031: insufficient Previledge

  My patterns of Datawarehouse meet s/n previledge.

  My source and the target is to have databases Oracle 11.2

  Can someone tell me what could be the problem?

  concerning

  Abdel Aziz

  Hi all

  The question is the question previkledge to create the link target to the source database DB and is committed

  concerning

  Abdel Aziz

• Error during installation of Oracle Identity Manager

  Hello
  I'm having a problem when trying to install Oracle Identity Manager. I'm trying it now for two days and it's always the same problem.
  
  I have read this thread:
  Oracle Identity Manager Server installation problem (but still have no idea what to do).
  
  I'm installing in a virtual lab environment (Windows Server 2008 on VMware).
  This is a new installation.
  
  Installation scenario:_
  * 1.* Oracle Database 10g (10.2.0.3)
  * 2 Suite DBA of Toad for Oracle
  * 3.* Oracle Weblogic Server 11g R1
  * 4 Oracle Identity Manager v9.1.0.1
  
  * 5.*
  Then I create a new instance of database Oracle for Oracle Identity Manager as described here:
  http://download-East.Oracle.com/docs/CD/B32386_01/generic.902/b32140/database.htm
  
  * 6.*
  Then I prepare the DB for Oracle Identity Manager by running:
  prepare_xl_db.bat C:\Oracle\product\10.2.0\db_1 xelsysadm xeltbs C:\Oracle\product\10.2.0\oradata xeltbs_01 TEMP password123 password123 XAVIER
  
  as described here (preparation of the database under Windows):
  http://download-East.Oracle.com/docs/CD/B32386_01/generic.902/b32140/database.htm
  
  * 7.*
  I get no error after you run the script is finished
  
  * 8.*
  Then I run Oracle Identity Manager v9.1.0.1\OIM9101\installServer\setup_server.exe
  
  * 9.*
  I'll take the steps and after the installation of the error pop ups next:
  
  Following error occurred during the creation of connected scheme*.
  Error occurred while loading database script*.
  +...\Oracle identity Manager v9.1.0.1\OIM9101\installServer\Xellerate/db/oracle/xell.sql+
  Contact your DBAORA-06550: line 1, column 7: PLS-00905: object SYSTEM. PIN_OBJ is invalid ORA-06550: line 1, column 7: PL/SQL: statement ignored [07/10/09 12:18]*.
  
  * 10.*
  Then I click Next and this message pop ups:
  
  Install oracle Identity Manager found that SetDBKey.bat failed. *
  
  * 11
  Then the installation ends / dropouts
  
  
  Does anyone have an idea what is talking about this error and how to get around?
  I would be really appreciated. I'm getting desperate, because I don't know what I'm doing wrong. I thank very you much in advance!

  Make sure that the IOM database schema is created.

  This error is usually tied when the user 'SYSTEM' is used as a schema of the IOM. IOM does not account for database support as its schema SYSTEM.

  After executing the prepare_db.sh, connect to the database using schema IOM to itself, if you have connectivity.

• Error during installation of Oracle - error in invoking target 'mkldflags ntcontab.o nnfgt.o '.

  Hi all

  I want to install Oracle 11.2.0.3 on Solaris 11 and 70% end I get this error "error in invoking target 'mkldflags ntcontab.o nnfgt.o' Makefile '.

  Tried Google but no resolution is mentioned for Solaris.

  Thank you

  NEWS: sh [2]: / usr/ccs/bin/as: not found [no such file or directory

  Looks like it's your root cause.

  Read this:

  Installation fails with: / usr/ccs/bin/as: not found [no such file or directory] on Solaris 11 or Solaris 10 (Doc ID 1551669.1)

• error during installation of Oracle Grid Infrastructure Oracle Linux 6.2 64-bit

  I am new to the Installation of Oracle RAC. I try to install Oracle RAC on vmware 11R2.  I checked all prerequisites so far and I'm sure I went through all the components mentioned in the documents of the Oracle. It doesn't matter what I do, here is the error. Do not know how to solve. Please help me.

  ID@racnode2 Desktop] $ cd/u02/linux_11gR2_grid/grid /.

  [grid@racnode2 grid] $. / runInstaller

  From Oracle Universal Installer...

  Check the Temp space: must be greater than 80 MB.   Real 29000 MB

  Past

  Check the swap space: must be greater than 150 MB.   Real 2999 MB

  Past

  Monitor: must be configured to display at least 256 colors.    16777216 real past

  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2013-09-22_04-04-10 AM. Please wait...

  [grid@racnode2 grid] $ Exception in thread "main" java.lang.UnsatisfiedLinkError:

  /tmp/OraInstall2013-09-22_04-04-10AM/JDK/JRE/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: no such file or directory

  in java.lang.ClassLoader$ NativeLibrary.load (Native Method)

  at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)

  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)

  at java.lang.Runtime.load0

  .............................

  ...............................

  ..............................

  Hi Harold,.

  You have the OS installation CD, if so go to the packages directory and you will find the RPM that I mentioned.

  If you do not have the CD of the OS, then get the number of link:

  http://public-yum.Oracle.com/repo/OracleLinux/OL6/2/base/x86_64/

  Thank you &

  Best regards

• Error during execution of the cr9idata.pl during the upgrade to 11.2.0.2 database

  I update the database of R12 (11.1.0.7) to 11.2.0.2 the following document, < interoperability Notes EBS R12 with Database 11 g 2, 1058763.1 >.
  
  In step 7, to create the directory nls/data/9idata...
  When I run the perl script, I get the error like below.
  - - - - -
  perl cr9idata.pl $
  Perl: symbol lookup error: /d01/oracle/SID/db/tech_st/11.2.0/perl/lib/5.10.0/x86_64-linux-thread-multi/auto/Cwd/Cwd.so: undefined symbol: Perl_Istack_sp_ptr
  - - - - -
  
  Then, when I tried to check with sqlplus, I now have the error as below.
  - - - - -
  SQL > connect username/password AS SYSDBA
  ERROR:
  ORA-12162: TNS service name: net is incorrectly specified
  SQL > exit
  - - - - -
  
  Then, when I checked some relevant environment, I noticed that TNS_ADMIN is empty.
  - - - - -
  $ echo $ORA_NLS10
  /D01/Oracle/SID/DB/tech_st/11.2.0/NLS/data/9idata
  $ echo $TNS_ADMIN
  
  $ echo $LD_LIBRARY_PATH
  /D01/Oracle/SID/DB/tech_st/11.2.0/lib
  - - - - -
  
  However, if I run the old old ORACLE_HOME environment file, then points to the old TNS_ADMIN (/ d01/oracle/SID/db/tech_st/11.1.0/network/admin/SID_host).
  And I think that's not valid...
  
  At the same time, when I check the tnsnames.ora, there is only the example files / default subdirectory < sample >.
  - - - - -
  $ cd /d01/oracle/SID/db/tech_st/11.2.0/network/admin/
  $ ls
  samples shrept.lst
  - - - - -
  
  How is - that must be managed in order to take the next step?
  Should I would define TNS_ADMIN with the old path...?

  Then, can I copy all of these files sqlnet.ora, listener.ora and tnsnames.ora...?

  Yes, and update the files manually with the new name of directory ORACLE_HOME. And, once you configure AutoConfig for the ORACLE_HOME again these files need to be generated for you automatically.

  After copying, can I put TNS_ADMIN path with the directory where the files are copied...?

  Yes.

  Thank you
  Hussein

• Error during installtion on oracle on rhel 5

  Hi all
  
  I am a new user for oracle, tried to install oracle 10g on linux redhat 5 but gettinh the same error message.
  answer / runInstaller
  [oracle2@localhost database_10201] $ sh runInstaller
  runInstaller: line 54: /tmp/database_10201/install/.oui: Permission denied_

  Hello

  Thanks for the reply xaheer

  You're welcome :)

  If you have any document for the stages of requesite pre kinkly poster

  Reference:

  http://www.Oracle-base.com/articles/10G/OracleDB10gR2InstallationOnRHEL5.php

  Thank you
  A H E E R X

• Tomcat 6 stop running during execution of Oracle XE

  Hi all
  =========
  My Env:
  Ubuntu 10
  =========
  After looking for a day and work, I managed to install Tomcat 6, Cocoon & Java files successfully. Here's my problem.
  I have an existing Oracle XE running with Apex 3.2.
  When I start Tomcat 6 it starts fine, but in a few seconds it stops and displays the message "servlet engine Tomcat is not running but pid file exist.". Can I stop & start this or restart it, but the same problem occurs after a few seconds with the same message (I know that checking the status). During this time running, I can access it via the browser of 8180 (I changed the port 8080 to 8180). Apex uses port 8080. Meanwhile, I have no problem with Apex (set to run at startup).
  
  When I stop the Oracle database and start Tomcat 6 it works very well, it continues to function perfectly. Even once when I starts the database, I am unable to Apex access via port 8080 and the message "Unable to connect to the server 127.0.0.1:8080."
  
  Can someone help me please?
  
  Thank you very much
  Naushad

  Hi Naushad,

  you have probably missed a setting to migrate the tomcat Port 8180. The behavior you describe matches that I expect a port conflict - or the other service works perfectly when it's "only", but does not work if it started before.
  You can fix this on both sides. Reconfiguring the port your EPG hosts your APEX may be a little easier. You just have to connect as sys and to execute the following block:

  begin
    dbms_xdb.sethttpport(8081);
  end;
  /
  commit;
  

  Change the port to any value you want.
  To change your port Tomcat configuration, you have probably changed the next song in your server.xml file

  You'll find other ports used by the Tomcat in this file as well. Make sure that you do not have a conflict with another service.
  I use a Tomcat beside XE on Ubuntu 8.04. Since I had to reconfigure the default SSL Port Tomcats (8443 was already used by another web server on this machine), I moved all of Tomcat to 100XX 80XX ports, keeping the EPG on port 8080, and it works fine for me.

  -Udo

• Could not find admintemplate.dwt error during the updating of model

  I have a site that I'm trying.  Each page was generated using a template I created.  Everything worked very well when I would update the model, each page will be updated.  Now when I make a change in the model, DW asks if I want to update the template files and click on update.  I usually change the drop down list of 'Whole Site' (don't know if that's what I'm supposed to do).  Now, when I select 'The entire Site', I get the following error:

  Access error (path to the \admintemplate.dwt file"file not found (error code 2).)

  I didn't not create a 'admintemplate.dwt', so what this is referring to and how to fix it try to search for this file whenever I update the model?

  Make sure you correct these mistakes before you try anything on earth - track

  http://validator.w3.org/Unicorn/check?ucn_uri=http://woodenhangersdirect.com/templates/TEM plate.dwt & ucn_task = conformance

  In addition, the document that you have linked is not a model correctly - it has no editable in the head region - i.e., doctitle around the title tag and the head just above the tag.  You must manually add those to this page.

  Then we'll take another look at your mistakes.

  Furthermore, how the page came in this bad state?  DW does not leave these editable regions - you must have deleted them?

• Errors during execution ADRELINK

  Please take a look at these parts of my log file the:
  
  **********************************************************
  You run adrelink, version 115.23
  
  Beginning of the session adrelink
  Date/time is Fri Mar 6 21:19:39 PST 2009
  Log file is E:/oracle/appl/admin/EBIZ01PD/log/adrelink.log
  Are command line arguments
  "force = n '"ranlib(1) n =""link_debug = n ".
  'filelist=E:/oracle/appl/admin/EBIZ01PD/out/plkapp000.txt '.
  
  
  Operating system information (output of "uname - a"):
  
  Windows_nt NVCIEBIZDB 5 02 58
  
  
  ......
  
  E:/Oracle_Env_Tools/VC98/LIB/ODBCCP32. OI!
  E:/Oracle_Env_Tools/VC98/LIB/MSVCIRT. OI!
  E:/Oracle_Env_Tools/VC98/lib/MSXML2.lib
  LINK: fatal error LNK1181: cannot open input file
  'E:/Oracle_Env_Tools/VC98/LIB/msxml2.lib '.
  gnumake: * [E:/oracle/appl/fnd/11.5.0/bin/OAMKSVC.exe] error 1181
  Done with the "OAMKSVC.exe" executable fnd link sat Nov 14 11:15:06 PST 2009
  
  Relink the module 'OAMKSVC.exe' failed.
  See error messages above (also recorded in the log file) possible
  reasons for the failure. In addition, please check that the Unix username
  running adrelink to read, write and execute permissions
  on the E:/oracle/appl/fnd/11.5.0/bin directory.
  and that there is enough space on the disk partition
  containing your Oracle Applications installation.
  
  Reissue of links module "WFLOAD.exe" in product DNF...
  
  gnumake f E:/oracle/appl/admin/EBIZ01PD/out/link_fnd_4032.mk
  E:/Oracle/Appl/FND/11.5.0/bin/WFLOAD.exe
  
  From the "WFLOAD.exe" executable fnd link sat Nov 14 11:15:06 PST 2009

  Hi Chris,

  Have you checked the names of directory as suggested above? If so, and none contains no spaces please log an SR.

  Thank you
  Hussein