Too many running 16-bit programs, increase the number in config.sys?

Similar Questions

• run 32-bit programs on 64-bit systems

  I am not very computer and reflected and clicking on things on this forum for the last three days and still have not thought about it.

  can someone explain please how to fix this problem in a simple language. Thank you

  http://Windows.Microsoft.com/en-AU/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  32-bit and 64-bit Windows: frequently asked questions

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.

  Can I run 32-bit programs on a 64-bit computer?

  Most of the programs designed for the 32-bit version of Windows works on 64-bit Windows version. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit version of Windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to the Vista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .

  See you soon. Mick Murphy - Microsoft partner

• Compile 32-bit programs on the cDAQ RT Linux

  I have a (OR-9134) running Linux RT NI cDAQ

  I am unable to get it compile 32-bit programs. The steps I've done were:

  1 used "opkg" to install all the 'gcc', 'CPP', "gcc-symlinks", etc. - that I could see associated compilers.

  2 export CFLAGS = "-m32' export CXXFLAGS ="m32", export LDFLAGS = 'm32'"

  3 CFLAGS = "-m32". / configure

  However only 64-bit binary are generated.

  I'm unable to find through "opkg" all packages associated with 32-bit builds or anything related to 'multilib '. Could you get it someone please let me know how do NI Linux RT generate binary 32 bits?

  Looks like you are saying that you need a 32-bit library to work with 32-bit LabVIEW. However, LabVIEW on your target cDAQ is 64-bit, as all software on our basic objectives of Linux RT Atom (the ARM-based targets are 32-bit). So, if you want your HDF5 library to run on the target of the cDAQ to 64-bit, you must use a 64-bit version of HDF5. This is true even if you connect/deployment to the target of a 32-bit version of LabVIEW.

  Of course, if you want to run HDF5 on a 32-bit system, as a target of LabVIEW RT with ARM 32-bit processor, or LabVIEW RT older targets that use VxWorks or Phar Lap instead of Linux, or a 32-bit desktop machine running Windows or any other OS, you will need a 32-bit version of HDF5. But I would not recommend trying to build HDF5 for these environments of your cDAQ. I recommend compiling natively on the cDAQ, if you at all (*), for the code, you intend to run on the cDAQ.

  (*) You should be aware of this already, but you can cross - compile your HDF5 library using Eclipse, i.e. http://www.ni.com/download/labview-real-time-module-2014/4846/en/ - some people prefer this to the compilation on the target, which is a little limited resources.

• Error.' c:\docume~'\earl\locals~1\temp. A temporary file needed for initialization could not be created or cannot be written in ' when try to run 16-bit programs in windows xp computer at home.

  original title: 16-bit windows subsystem error

  I was able to run 16-bit programs on my computer with windows xp home edition. now when I try to open the program I get a 16-bit windows subsystem error. c:\DOCUME~'\earl\locals~1\Temp. a temporary file needed for initialization could not be created or cannot be written to. Make sure that the path exists, and the space is 'close' to teminate the application available.choose

  Hi EarlBettencourt,

  You can follow this link & check if the problem persists:

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  Hope the helps of information.

• Need to change the properties of the Clipboard or increase the number of characters that can move from one program to another

  Original title: Clipboard

  Hello

  I use a software and I have the problem with the paper, I need to change the properties of the Clipboard or to increase the number of characters that can pass from one program to another

  where can find Clipboard in windows 7 and how can I change properties?

  There is no user-oriented Clipboard option.

  For 32-bit applications, the Clipboard can allocate blocks up to 2 GB in size or to a maximum of the amount of virtual memory in the PC has, is the least. The Windows Clipboard does not impose any other size limits.

• How can I run 16-bit programs in Windows 7 64 bit?

  I'm running on Windows 7. Windows 7 does not run16 ILO programmes, e.g. Dbase III. Windows XP run 16-bit programs. How can I integrate windows XP running 16-bit programs?

  Wednesday, June 9, 2010, 06:47:42 + 0000, Ronin Loki wrote:
   
  > I am running on Windows 7. Windows 7 does not run16 ILO programmes, e.g. Dbase III.
   
   
  This is not quite accurate. 64-bit Windows 7 (which must be what you)
  have) does not 16-bit, but Windows 7 32 bit programs.
   
   
  > Windows XP run 16-bit programs. How can I integrate windows XP running 16-bit programs?
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• How many computers which can install you programs CC on and how many computers can use programs at the same time? [was: Question for you!]

  When you buy an individual monthly plan for CC at $50 per month, how many computers which can install you programs CC on and how many computers can use programs at the same time?

  Thank you for your answer!

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it. You can use apps on a single computer at a time.

  Kind regards

  Hervé Khare

• How to increase the number of entries in MAC

  Hi everyone, I have a WRT 1900AC and I've reached the limit of 32 entries of MAC for filtering options, we have many more users who must be saved from MAC, anyone know how to increase the number of entries please?

  Tanks a lot, im going to read the info in the links, then ill try
  Tanks for help!

• I have an iPhone 6 and use Verizon as my server. How can I increase the number of rings until it goes to voicemail?

  I have an iPhone 6 and use Verizon as my server. How can I increase the number of rings until it go to voicemail?

  You can not. There is no adjustment to make on a phone. In fact, it is not based on the number of rings, it is a problem of synchronization based on the parameters of the call. You can contact Verizon to see if they can increase at that time here, but even if they can, it won't be much, only a few seconds if they do at all.

• Extend an AirPort Extreme with a Terminal AirPort Express increasing the number of users?

  I have an AirPort Extreme 2 years ago. Based on the technical page of the product, the router can theoretically connect up to 50 users. That's more than enough if used at home.

  However, I intend to deploy a network of airports in our new office building and we have more or less 50 employees. Because everyone has a smartphone that it needs to connect, I try to at least 100 users/devices. Which includes all the network printers. Obviously, an AirPort Extreme is not enough. Another thing, I have considered is that the office building is 2 floors and all the walls are made of concrete, which means the distribution of the wifi signals is affected.

  I thought to extend an AirPort extreme with 3 more AirPort Expressare (mobile network). It's 2 APs on each floor. That should solve the problem of distribution wifi. I'm not sure the first problem - 100 or more devices into a single network.

  So extending an AirPort Extreme with 3 more AirPort Expressare (making a roaming network with 4 access points) increases the number of potential users of 50 to 200 (assuming that each access point can connect to 50 users)?

  In theory, Yes.  But you must take this specification of 50 users with a grain of salt.  Once there are 20-25 users on the same airport access point, things will slow down significantly. The system will operate as of cold molasses with up to 50 users on the same access point.

  Quite frankly, in a business application, you need a software router. Apple routers are designed for home use.

  Another way to say the same thing, is that Apple does not routers Apple at the Apple Store. Who could tell more than anything whatsoever about the suitability of the products in your proposed network.

  My advice would be to get an IT professional in and review your needs... before you move further.

• How can I increase the number of tags shown down to the bottom of the list?

  When I go to bookmarks/Tags, there are only 10 tags displayed. I have created at least 15 tags.

  Is it possible to increase the number of Tags displayed in the drop-down list?

  Thank you

  Do you mean "Recent Tags", which has an icon a folder of blue color with a magnifying glass looking for primitive on the record?

  This folder has a limit of 10 results. If you want to create a "All the Tags" item in the Menu Boomarks, you can do this by creating your own "smart folder. The process I use is a little involved, if patient with me (also see the screenshots).

  The query used by the recent Tags is:

  place:type=6&sort=14&maxResults=10
  

  So, for all of the tags, we will fall on the maximum number of results:

  place:type=6&sort=14
  

  If you prefer your tags in alphabetical order instead of having most recently used in the upper part, use it instead:

  place:type=6&sort=1
  

  Go ahead and select the line you want and right-click > copy.

  Then, click the drop-down bookmarks menu, expand the toolbar bookmarks, right click on any existing element and choose new bookmark.

  In location, paste the query and in name, type all tags (or description of your favorite). When you click on Add bookmark, Firefox to add it, but it does not show the blue search folder icon. Drag the bookmark in the menu, and it will turn into a search folder works.

  Success?

• Increase the number of superior to 6 downloads?

  I download a bunch of shorts about 25 to 40 minutes each. I use Time Warner Cable with a download speed of 30 Mbps.

  I noticed that I can download only 6 movies at the same time using Firefox. When one of them is finished, I can download another clip.

  Is it possible that I can increase the number of downloads in a new ceiling?

  There is a "hidden" for this parameter.

  http://KB.mozillazine.org/about:config
  
  Network.http.Max - persistent-connections-per-server - default = 6

• How can I increase the number of tabs on the new tab page?

  Opera seems to allow a lot more tabs on the new tab page that Firefox 9 seems to allow. Is it possible to increase the number of tabs on the new tab page in Firefox?

  Hello bstjoe, Yes, you can enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.newtabpage.columns / browser.newtabpage.rows. Double-click on them and their values accordingly.

• Restore or increase the number of lightweightThemes stored in prefs.js

  Hi, since Firefox lets you keep a list of people with disabilities "light themes" to try because later, saved in the prefs.js (shown in the Extensions > appearance in Firefox) ive been setting up a collection and yesterday found https://addons.mozilla.org/en-US/firefox/user/birdyann/themes with a lot I wanted to try, but did not know that Firefox limit disabled themes at 30 , so after the addition of more than 30 of these themes to my list of disabled, open all the themes disabled id was on the list have been removed before now.

  is there anywhere other that prefs.js I can watch what's going to tell me what lightweightThemes I * allowing * in the disabled list?

  is it possible to get prefs.js to increase the number of disabled themes it will keep track of?

  Firefox stores a maximum number of Personas (DEFAULT_MAX_USED_THEMES_COUNT = 30) data

  • Resource://GRE/modules/LightweightThemeManager.jsm

  If you install more Firefox Personas will remove other Personas to make room for the new identity, so it is best to keep a list or bookmark the site of your favorite characters.
  
  You can override this limit by creating a whole pref with the name lightweightThemes.maxUsedThemes and set the value accordingly.

  • http://KB.mozillazine.org/about:config

  You can also use the Personas Plus extension to handle more Personas.

  The list of installed Personas is stored in the prefs.js in the Firefox profile folder in the pref lightweightThemes.usedThemes in format JSON object ({'id': ' # ', 'name': 'xxx',...}).

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  The first entry of this pref is the currently used character.

• How does one increase the number of entries in the drop-down list of the address bar?

  It seems that the number of entries in the drop-down list of the address bar is limited to twelve URLS. I would find it convenient that more than twelve years can be shown, but do not know how to increase the number.

  Increase or decrease browser.urlbar.maxRichResults using Subject: config

  • http://www.mydigitallife.info/change-the-maximum-rich-URL-listings-in-Firefox-awesome-smart-location-bar/
  • http://KB.mozillazine.org/about:config

  NOTE: The FasterFox extension may affect the number of items displayed if you have it installed (addons > Extensions).

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.