Error.' c:\docume~'\earl\locals~1\temp. A temporary file needed for initialization could not be created or cannot be written in ' when try to run 16-bit programs in windows xp computer at home.
original title: 16-bit windows subsystem error
I was able to run 16-bit programs on my computer with windows xp home edition. now when I try to open the program I get a 16-bit windows subsystem error. c:\DOCUME~'\earl\locals~1\Temp. a temporary file needed for initialization could not be created or cannot be written to. Make sure that the path exists, and the space is 'close' to teminate the application available.choose
Hi EarlBettencourt,
You can follow this link & check if the problem persists:
Error message when you install or start an MS-DOS-based program or 16 - bit Windows based
Hope the helps of information.
Tags: Windows
Similar Questions
-
Try to run a DOS program on my new computer which has Windows 7 installed on it.
Our point of sale is a DOS based program. He can run, must see what terminal number you use. For this information, it looks like the AUTOEXEC. BAT file. I used to be able to access and modify the Autoexec. BAT file in Windows XP by running the command "SYSEDIT". Windows 7 does not recognize "SYSEDIT" and I can't find a file AUTOEXEC. BAT file. Y at - there a way around this problem or a solution? Important to remember that this point of sale program is old, essential for us and is hard coded to look for the Autoexec. BAT file (everywhere where it used to find). Thanks for the help.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to / stationed there.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
WORDPERFECTERROR
SZaPPnAME:WPWIN10. EXE SZaPPVER:10.0.0.0EXE SZaPPVER:10.0.0.0663 SZMODnAME:HUNGAPPSZMODVER:O; O; O; OOFFSET:OOOOOOOO
c:\DOCUME~\SHARI\LOCALS~1\TEMP\WER9878. DIR00APPCOMPAT. TXT
WPWIN10. EXEMDMPShari,
Welcome to the Microsoft Answers community.
The question you have posted is related to Word Perfect and would be better suited with Corel software Support. Please visit this link to find a community that will provide the support you want.
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network. I enabled netbios over tcp/ip on computers
Hello
Try the steps listed in the link and check if this may help: "Access denied" error message when you try to open a file: http://support.microsoft.com/kb/810881
-
Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?
Hi jsims313,
Welcome to Microsoft Answers Forums.
We would like to get more information about you to help solve your problem. You better, please answer the following questions.
· What is the format of the movie saved project file?
· When you get this error message?
To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.
- Insert a DVD recordable or rewritable Virgin into your DVD burner.
- Open a project in Windows Movie Maker.
- Click file, and then click Publish Movie.
- Click DVD, and then click Next. Creation of DVD Windows opens.
- All the steps to create a DVD using Windows DVD creation.
Publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot create a backup, error: "a snapshot could not be created."
Original title: computer backup
When you try to back up my computer, I get a message that says "a snapshot could not be created. Storage insufficient to create the shadow copy storage file. My D drive shows that it is full. Can I format drive D I can backup?
Hello
The D: partition is normally your recovery partition that you do not touch with the exception of the enumerated grounds.
You don't tell us the size of your D: partition.
There are between 5-15GBs, is the recovery partition and read more:
Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.
1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.
F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.
You will need to ask your manufacturer for proper sequence.
2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.
Also ask them how to make records.
Your D: Recovery Drive is should not be used for backups, defragmented, etc..
There are backups on an external hard drive.
To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
How to save properly:
If you want to do a complete PC Backup or only a backup of files, buy an external hard drive.
Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.
All editions of Vista can do backups of files.
Here's how to back up and restore your files:
"How to back up your data.
http://www.wintuts.com/how-to-backup-your-data
http://www.home-PC-help.com/windowsvistabackup.html
"How to restore your files.
http://www.wintuts.com/how-to-restore-files
This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):
«How to make a backup of the computer in Vista»
http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/
"How to restore a full backup of the computer.
http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/
FAQ from Microsoft about backup and restore:
"Back up and restore: frequently asked questions.
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.
This program must be purchased:
"Acronis True Image".
http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6
These are free programs for the protection of the computer:
"EaseUS Todo Backup free"
http://www.TODO-backup.com/products/home/free-backup-software.htm
"Download Backup & Recovery 2012 free FREE!
http://www.Paragon-Software.com/home/BR-free/download.html
«Macrium Reflect FREE Edition»
http://www.Macrium.com/reflectfree.aspx
See you soon
-
Original title: Windows - no system reserved partition backup error
Whenever I try to back up files by using the backup utility Windows 7, I get the following error message:
"A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information.
"Details: the specified object could not be found" error code: 0 x 81000019The backup utility starts and says is 'create shadow' fails.
In the research forums, I find a common solution to the increase in the size / cleaning of the system reserved partition. My problem is that the system reserved partition does not exist on the computer. The computer originally had Windows Vista and upgraded to Windows 7 x 86 Ultimate SP1.
Is it possible to get Windows 7 backup to work without a system reserved partition? If not, is anyway to create a system partition reserved without wiping the hard drive and reinstalling everything?
Hello
Thanks for the update.
I ask you to answer these questions:
1. the computer is connected to a domain or a group of House?
2 NAS hard drive is located on a different computer?
If the computer is connected to a domain, then I ask that you post this question on the forum of TechNet at following link:
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS
Please get back to us with answers.
-
Windows backup error; A snapshot could not be created.
Original title: Windows 7 - windows backup - snapshot could not be created
When you use the Windows backup I get an error indicating that the snapshot could not be created unless I'm trying to backup to DVD or a USB hard drive.
I use:
Windows 7 Home Premium SP1
processor Intel I5 2310
8 GB RAM
1.5 TB of hard drive
The full message is:
"A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information.
Details: Writer experienced a transient error. I have the backup process is restarted, the error does not recur. »
Where newspapers there is an event id 8229 - I went to the event log online help and tried all of the listed suggestions, including shutting down my computer and then restarting him and still get the same error. I tried to disable the antivirus software and do the back up but still get the same error.
I have spent at the command prompt and typed "vssadmin list writers" to see if all the writers are stable and the following are not listed as stable:
System Writer - State [5] waiting for completion
MSSearch writer - State [5] waiting for completion
WMI Writer - State [9] failed
What can I do to get the backup to work?
Hi Tom,
I wish to inform you that this error may occur if the Volume Shadow Copy Service of Notification of SPP has not started and is not set to automatic. Please refer to these steps to learn how to start their:
a. on the desktop, press Windows key + R to open the Run dialog box.
b. type services.msc in the Run dialog boxand press Enter to open Services.
c. right-click on the shadow copy volume and the SPP Service of Notification services, and then click Properties.
d. if the box Startup type is set to Disabled, change it to Automatic.
e. click OK to close the Properties window.
f. right click on the Volume Shadow Copy and SPP Service of Notification servicesand then click Start. The service should start without errors.
If you receive any errors, please let us know.
See the Event Viewer for the exact error message or code, and the cause of the problem. Please let us know the same thing.
a. click on the Start button.
b. Type in the Event Viewer, in the search field.
c. this will bring up the box of Event Viewer . Click to open the Event Viewer.
d. in the left pane, expand Windowslogs.
e. click the application log and syslog, one after the other. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be in training. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.
Please get back to us with the results.
-
These last messsage of error on one of my two Windows 7 PC, 64-bit. "The Apple software update server could not be found. "Check your internet settings and try again. My second Windows 7 PC Apple Software Update works normally. The Apple software update version is 2.2.0.150. Can anyone tell how to fix this?
I have the same problem and I don't want to lose my content. App Apple Software Update doesn't work
-
I've been setting up a windows xp professional operating system, I saw an error message "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit", can anyone help me how can I solve this problem? Thank you.
Hi HannaAntoun,
See the article after some troubleshooting for your question:
http://support.Microsoft.com/kb/330181
I hope this helps!
-
I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!
Hello
Try the steps listed in the link below and check if it helps:"Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729
-
Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.
I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.
Hi ameerlakhani,Try to save the scanned in a different file format and check if it helps fix the problem.Follow the steps in this article and check if it helps.If this is not enough, post your request in the support forum HP for assistance.Visit the following link to do the same thing: -
My
System Type X 86-based PC
Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
A05 BIOS Version/Date Dell Inc., 07-31-2009
SMBIOS 2.5 versionI'm trying to schedule a new task I get this error
The new task could not be created specific error is 0x80070005: access is denied
I am an administrator for this computer and I am connected to the office network.
I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update
Is there any fix for this?
Thank you
Hi dgxp64,
· The computer is on a domain network?
Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.
Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.
Method 2: Check to see if this article helps you.
How to solve the scheduled tasks in Windows XP and Windows Server 2003
Method 3: We will grant permission for the C:\Users folder and check if it helps.
How to set, view, change, or remove special permissions for files and folders in Windows XP
If the computer is on a domain network you can post your query on the TechNet Forums.
-
Prob Winmail.
Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.
Using a digital signature? Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.
Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.
Steve
-
Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all
Maybe the info will offer something that you haven't tried:
First, launch... Task Manager...
How to launch the Task Manager instantly in Windows XP or Vista?
http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-VistaThe Task Manager / processes tab select (highlight) any which instance of:
"wmplayer.exe" and left click on the button "complete the process".If you see a dialog box 'Warning'... left click Yes.
Close the Task Manager.
Try Windows Media Player again.
And... the following links may be worth a visit:
(925704) when I try to use Windows Media Player 11, the program
does not start, or some user interface elements are empty
http://support.Microsoft.com/kb/925704Please see the following article for info on opening a high command
Prompt in VistaWindows Vista - command prompt: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
(scroll down to: how to run a command with elevated privileges?)Good luck...
Maybe you are looking for
-
Support of software not installed?
Hello It is with respect to the PCI-5640R. I have LabVIEW 2009 installed, but I get a warning that the software support is not installed for the FPGA. I reinstalled NI RIO 3.3.1. All the software seems intact and I can't tell what's missing. LabV
-
bad terminator in the Basler A504k CIM series
I'm talking about in series of LV to a Basler A504k via a NOR-1429th and, despite what says in the compatibility report and in this post, I perfectly managed, at least as long as I tried. A (still unpolished) example of my order that VI is attached (
-
User accounts get corrupted!
OS: Windows XP SP3my computer was working fine until a week ago.Basically, I have 1 Admin account, 1 account administrative privileges and 2 limited accounts.now there are 4 days, I logged t my admin account, but it connected me with a temporary prof
-
Some DVDs, like Windows XP, plays OK and any disc or CD plays in the country. But, no DVD set. Does not recognize. Search and search, but no game. Help, please.
-
Foxfire orange tab on the Gil is missing once again. Where can I find to install?
Foxfire has an orange tab that is normally on the top of my Google Homepage. But missing once again. Where can I install again?