Toshiba snaps the factory system?

Similar Questions

• My computer was not restart and I did a restore of the factory system, and it would not load the new screen?

  My computer has been restarted not and I have to click the button 3 or 4 times just so he can work. I use it for school so I really need to work and so I did the system back restore to the factory settings and it did again when the screen would not load but now it works. I left it only after I did 8 hours? that is the problem or do I do it again? I mean restoration?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if you can doot:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Laptop will not reinstall windows after the factory system recovery

  So I have a laptop HP which is relatively new. I recently acquired the Virus 2010 Vista AntiVirus Pro. When the malware and spyware could not fix the problem, I decided to do a system restore, which would put the computer to the way it was when I bought it. I backed up the files and do the system recovery. He filled the recovery then said it will re-start to reinstall windows and complete the process.

  After the restart as it gets and error that says: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "ok" to restart the computer, and then restart the installation. »

  The only option is to click on 'ok', but after clicking it he is trying to reboot once again and the same error comes back. We tried to manually close the laptop and restart, but we always get the same error. I can get the start menu when the information system and the recovery is but to the past is just the mistake. Any suggestions on how to fix it? I don't know what else to do.

  http://welcome.HP.com/country/us/en/contact_us.html

  Problem with the HP recovery process, contact HP at the link above.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Should I have the original keyboard for the factory system recovery settings

  HP Omini 220-1180qd desktop

  Win 7 64 bit

  My all-in-one PC has sent repair HP because the new second hard drive has failed. When he returns, should I the original keyboard to launch upward with the new system?

  I have a wireless Logitech MK300 who is older and I am away from home where the original HP keyboard. I appreciate your help and won't cause a problem with the new configuration.

  I suggest using the regardless of the type of initial connection

  PS2 or usb

  but should strive to put in place that long, the device can detect your keyboard

• Recovery of the factory from 32 bit to 64 bit with the note system performance

  Recovery of the factory from 32 bit to 64 bit with the note forever system performance, it's about associated wire
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50433
  which is closed/locked, and had no correct answer.

  I just bought a Toshiba L750. After learning of the default Windows 7 installed is Windows 32 bit, I decided to go Recovery Wizard from Toshiba upgrade to 64 - bit. However, the process is stuck to the system performance of note, that repeated several times for 2 hours.

  Given that I guessed that screen performance of system just note one full screen of a normal process of Windows, so I pressed the button Windows start to display the taskbar which showed a component of Adobe installation process has failed. In any case, I clicked on the install Adobe on the taskbar button and close the window.

  The note system performance then continued with about 10 steps ahead after 15 minutes. All well done.

  So the trick is to close a window of the installation components that get stuck. Hope this helps some Toshiba laptop users out so hard.

  A suggestion from bits to the team of Toshiba laptop:
  The full screen of the Recovery Wizard is good to hide technical details from users. However, if hang in some components, like the Adobe component I've seen, this will be confusing and advises current defects if the end-user following some in the thread above, legacy because of some missing components and the wrong configuration. It is preferable that the wizard of recovery to exit full screen at a given time, or the wizard handles error scenarios better.

  > So the trick is to close a window of the installation components that get stuck. Hope this helps some Toshiba laptop users out so hard.

  Thanks for sharing this with us!

• What is the difference between the standard system restore and to advance option IE. Windows and smart only restore to the recovery program? Two of them are my computer to factory settings? Which is better or less annoying?

  I use Window XP Home Edition.

  oureasyphamax,
  I do not know if I understand your question completely, but let me answer what I think that you have requested.

  The Windows System Restore will restore your Windows settings (drivers, registry, etc.) to a previous state (note it does not affect your user data).

  Smart restore or a system restore that is started before Windows starts, usually accessible from disk or a boot partition, an OEM recovery option.  It will usually restore your PC to factory without saving the data, depending on the OEM recovery options.  For assistance with this type of option recovery\restore, you will need to check with the manufacturer of PC.

  If this does not answer your question and then return. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers

  Hello

  You should not have a password to reinstall Vista.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Have a (HP Pavilion a6230n PC) I lost my 'FACTORY' built inside the backup system

  Have a (HP Pavilion a6230n PC)

  I lost my "BOOT FACTORY" built inside my vista 64 system

  I have (Windowsd Vista Home Premium GEMact)

  I need to restore the rest of my computer may be restoring to the original

  Hello

  Here is the HP Recovery Options, also include pressing F11 at startup to start this process.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If you still have problems with the HP recovery process, you will need to contact the HP support (it's their recovery process).

  You may need to ask them to send you recovery disks.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Guests of password to you at the beginning, before my Toshiba has loaded my system.

  Original title:

  When I turn on my laptop asks me my password at the beginning until my Toshiba has loaded my system. Once loaded, I wonder my administrator password, until I can make progress. How can I remove the first request of password, or delete partitions?

  Hello

  You have the first password, who is invited before the start of the computer to the top?

  The password you are talking maybe a password for the BIOS.

  You will need to access the BIOS and disable the password.

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I suggest you to contact the manufacturer of the computer for tying this topic.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• How to restore vista 32 bit at the factory without disks of backup system settings?

  Hi my computer hp pavilion entertainment pc laptop is old 1 week to shop, I have istalled/uninstalled programs and drivers, web surfing etc, but means back to their original state with only the left on original programs/drivers, so I can start again.

  I would like to dedicate my laptop mainly for audio production/recording etc and get rid of things unnecessery taking up space and ram.

  looking for advice on this operation. I'm not aware of all the viruses etc and I did not create system backup discs either...

  can someone please?

  In addition, you can do it this way since in a Vista running:

  Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
  If the PC can be started and runs in Windows, use the Manager HP recovery disk to restore the PC to original factory State by following the steps below.
  1. Click Start and type Recovery in the search field. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
  2. Click Advanced options , System Recovery , and then click Next . The PC will restart.
     Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
  3. When the PC restarts, select the System Recovery option and click Next .
  4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
  5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
  6. When you are prompted to recover without backing up your files , please STOP before you click Next .
     It's the last chance to change your mind recovery PC and delete all the files at the moment. Once you click Next , the restore process cannot be stopped
  7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
  The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.

  Mick Murphy

• Dell inspiron E1505 with Windows Vista system restore to factory setting led by mistake. The operating system version is incompatible with Startup Repair tool

  I tried to restore my Dell Inspiron E1505 laptop to the factory setting.  I pressed F8 then selected repair and then Dell Factory Image Restore.  Used to format hard drive.  He formatted the hard drive and then he restored the system.  Suddenly, a small window pops up without any details, but saying "error".  I restarted the laptop, it entered into Startup Repair mode.  But even once showed error "operating system version is incompatible with startup repair".  I don't have my windows CD/DVD.  Although the windows sticker is still on the laptop.  Please advise me how to install the system on the laptop so I can use the same.  Please note that I am in Gurgaon (India).

  Thank you

  Hello

  Because the computer is located in a no start situation and you don't have the installation disc, it is best to contact the manufacturer for assistance.

• Toshiba Windows Vista operating system to start, Safe Mode doesn't work anymore. How to save the personal data of the computer that won't start.

  I have a Toshiba laptop with windows vista: the OS home.

  Recently, the operating system wouldn't start up, there will always be on the page of the logo 'miscrososft society '.

  I tried F8 to start safe mode, safe mode started but will load some files and stay on this page forever.

  I tried to run the system repair, the report is as follows:

  Signature of the problem:

  Event name: Startup Repair V2

  Signature of the problem 01: breakdown car

  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000

  03:6 problem signature

  Signature of the 04:851981 problem

  Signature of the problem 05: corrupt and registry

  Signature of the problem 06: corrupt and registry

  Signature of the 07:1016 problem

  Signature problem 08:3

  Signature of the problem 09: Rollback register

  Signature of the problem 10:0

  Signature of the 11 problem: 6.0.6001.2.1.0.256.1

  Signature of the 12:1033 problem

  I tried to use system restore, but he says he has not found a moment of restoration which is good.

  The main concern right now for me is to get my personal data and files on the computer.  I still have another computer to use, so I'm not so worried about starting the computer.  I want to find a way to the first backup of my personal data and files from the computer to external devices, then try to repair the computer.

  Thank you.

  Hi DreamMeng,

  You can try to use third party software to back up data and check.

  You can use your favorite search engine to navigate on the third-party data backup software and that the software allows to save data.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also make contact with the Local Techshop for assistance to the protection of the data.

• How to save important files a files on a dvd before doing a restore of the entire system with factory.so disk I am able to reinstall computer after system restore.

  I need to do a restore of the entire system with disc received from factory.but that I have personal files and folders that I need keep.such as banking, contacts, photos, ect. ect. How do I put them on a dvd a restore then their return after the full system restore

  Hello

  If the system still boot and CD/DVD Burns just put in a DVD-R (write once) or DVD - RW (burn
  several times)-it will encourage - when its ready use Windows Explorer to drag and drop files (and
  their content) on the DVD. When you're ready, click BURN. I would like to make a couple of each DVD for
  Security with redundancy. These will not be encrypted and you can access the files out of them or
  subsequently copy on a hard drive.

  Basically, make sure you know what you want to copy the files and put them in a blank DVD to write.

  ---------------------

  If the system does not start, then you will need to put the drive in another computer or in a
  External enclosure USB so you can copy files to removable media.

  ---------------------

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx

  How to burn a CD with Vista
  http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/

  Burn a CD or DVD in Windows Vista
  http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/

  Microsoft video - how to burn CD/DVD
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.cdfreaks.com/

  Burn a CD or DVD in Windows Media Player
  http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspx

  Burn a CD or DVD in Windows Media Center
  http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspx

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
  How to burn an Audio CD - see also related Articles
  http://www.vista4beginners.com/how-to-burn-an-audio-CD
  Burn a CD or DVD using Windows Vista - a video
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Disc burning: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspx

  Should which CD or DVD format I use?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspx

  Windows Media Player playlist: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspx

  Get the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Best order of events after the recovery of the system to the factory settings?

  I have done so recently a system recovery to the factory settings on my laptop and I was wondering just what I need to do and in what order to ensure the security of my computer.  Also, what is the best way to get Windows updates?  Should I open check updates from Control Panel or let them come as I go about my business or y at - it another option I should know about.

  Thanks in advance.

  Hello

  You can tell Windows to check the updates of their installation at a faster pace. You could
  Download and install Service Packs manually however allow updates as
  usual will allow still more special updates to install.

  In telling Windows to check updates or don't expect that the automatic update are essentially
  equal. Rob - bicycle - Mark Twain said it is good.

• Computer was accidentally arrested during a complete restoration of the system to the factory settings. Help!

  OK, so I did a complete system restore to my netbook in its factory settings. Everything went well until I'm gone, and I find that the computer has been stopped during the restoration of the system. I turned it on and it loads and then displays the screen that says

  "Setup prepares your computer frst use."

  but after about 2 seconds this screen a pop up comes and says:

  "The computer shut down unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click OK to restart the computer, n then restart the installation. »

  Well I click OK and I have let it restart but then he did the same EXACT thing each time only. Please help me find a soloution because I can't my school without her wok!

  Start the full system restore process to repair what has been damaged
  on the first attempt.
   
  "hillcon2" wrote in message
  News: * e-mail address is removed from the privacy... *
  OK, so I did a complete system restore to my netbook in its plant
  Parameters. Everything went well until I left and I find the computer
  has been closed during the restoration of the system. I turned it on and it loads up and
  then displays the screen that says
  "Setup prepares your computer frst use."
  but after about 2 seconds this screen a pop up comes and says:
  "The computer shut down unexpectedly or encountered an unexpected error." Windows
  installation cannot continue. To install Windows, click OK to restart the
  computer, n then restart the installation. »
  Well I click OK and I have let it restart but then he did EXACTLY the same thing
  every time. Please help me find a soloution because I just can't get with my
  wok to school without her!