Have a (HP Pavilion a6230n PC) I lost my 'FACTORY' built inside the backup system

Similar Questions

• Pavilion 15-ab043sa: cannot reset to factory settings after the upgrade computer laptop brand new 10 Windows

  I bought 2 new laptops, they seem to be special models not listed is not in the HP support site, purchased from Currys PC World in the United Kingdom.

  First HP Pavilion 15-ab045sa laptop computer 15.6 "-red, upgraded to windows 10 perfectly well and I made a backup of the system while I studied the creation of recovery media (this info must be printed with the laptop in the box, rather than letting the user have to find BTW)."

  The other a HP Pavilion 15-ab043sa laptop computer 15.6 "-blue, for my parents, has turned into a total disaster."

  The two models are the same, except that the first is red and the other is blue, that's why they have different product numbers?

  I was now in a position where the recovery on the D: drive partition is not a factory reset.

  I did not even recovery disks as having the first one to go smoothly, I thought the same thing would happen on the second laptop and I got the recovery disc then.   I tried to create a USB stick recovery, but I had no one who can save the system settings - need at least 32 GB free.

  This occurred as first I started the laptop, made of windows, MS Office 365 updates, added then waiting 2 days for windows 10 to arrive.  When it came it installed fine and then I added a printer driver for an HP printer and made some configurations of the operating system.  At the next reboot showed something was wrong as the boot took over 7 minutes.  As the synaptics app was referenced twice in the tab start Task Manager also had strange things in the system.  Rather than go back to a previous system restore point that I attempted to identify what was wrong and uninstalled all without success.  I then had the opportunity to go back to 8.1 for Windows or "reset the PC.  Not a lot of explanation on delivery to zero and certainly no warning options that the D: partition was no longer valid.  Windows options were "in my face" so I don't think watching HP recovery.  So I chose to run from Control Panel 'Reset the PC and keep the files'.  So, indeed, I now have a clean install of Windows 10 but have lost all applications that were on the factory orginal building.  I see no way to re - install all of these programs and find the license keys.  I have more HP recovery at all.

  So I have no way to put the blue doesn't return to the factory settings.

  Advice please, I want a laptop blue, the same as the red, i.e. Windows 10 with all applications that have come to the factory as well as the correct printer drivers and a time of less than 30 seconds of starting.

  You are not sure if there is anything I can copy from red to blue to get it going again?

  Any help gratefully appreciated, thank you

  You have the options of Chat or telephone. Mon - Fri 08:30 - 18:00. Sat 10:00 - 16:00.

  https://support.HP.com/GB-en/contact-HP/product/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8255007#Z7_3054ICK0KGTE30AQO5O3KA30F3

• Pavilion all-in-one Q214 23: factory restore on the new HP Pavilion all in one computer

  I have a week 6 old Pavilion Desktop all-in-one.  I wanted to do a factory install on it because I had a lot of extra things that I don't want anymore, I installed and I thought what a factory restore would be better.  I went to the HP Recovery Manager and no where in the choices he said 'factory restore '.  He used to have this option in the HP recovery environment.  I checked all the options and nothing on the factory restore.  I made a set of recovery discs, but I always remember that HP still had the opportunity to do a factory restore.  I have tried F11 and F8 and no luck.

  Answers or suggestions will be greatly appreciated.

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  According to the model of the computer, it can not be called exactly the HP system recovery but if your computer is originally shipped with Windows preinstalled 10, recovery partition must be present.

  S ' Please, first manually copy your imporant most of the data on an external partition

  -Follow these instructions here to open the collection from inside Windows

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html#option2

  'S called it Reset - Windows Reset with options to RESET the machine as long as the plant (remove all), with an option to "freshen up" Windows and keep personal files.

  Let me know how it goes and if it works for you.

• Does someone have a MagSafe 2 power adapter whose serial number is located inside the space where the two pins?

  Hi guys!

  I want to know if the power adapter of MagSafe2 that I just bought is genuine or counterfeit.

  I bought a MagSafe2 power adapter that has its serial number located inside the space where the two pins. Its model # is A1424. All the power MagSafe adapters I've seen always have serial number located under the round metal head big (I guess it's called head male or female?). Please see photo for reference.

  If any of you have or had any Apple Store, can you let me know?

  Thank you!

  

  My 85 Magsafe is exactly identical to your image.   It was 'inside the box' with a new MBP computer.

• I have an unable to print with Epson Workforce 2540 after update of the operating system at El capitan

  I cannot print on my Epson Workforce 2540 via my home wi-fi after updating the operating system to El Capitan (10.11.5).

  The news of printer Epson shows that it is connected to the network. After sending a file to print, I get this error message: stop - "filter" has failed

  The Mac App store shows that my printer software is up-to-date. Can you help me, please?

  did you go to epson web site and watch if they have a driver that support el capitan? If they don't you will have to revert to a version of Mac OS x, they have a driver for or get a new printer

• My computer lost all games provided with the operating system. How to make a comeback?

  I don't have the DVD.  The operating system came on the computer when I bought it last year.

  Hi RuthByram,

  The Games folder is the central location for all the games on your computer. If you are referring to the built-in in Windows games, the games are automatically added to the Games folder.

  Otherwise, you can turn on Windows features games and check.

  a. click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to enable the games to open the games and select the checkbox next to the games.

  c. click OK.

  For more information, see the link:

  Install a game in the Games folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-game-in-the-Games-folder

  Hope this information is useful.

• Windows 7 doesn't have a network card after that I did a clean install of the operating system

  After doing a reinstall full Windows 7 my manufacturer's CD, I can't connect to the internet or a LAN wired or wireless, probably because the BONE is not an installed network card, in accordance with the resolution of the problems Windows. I reinstalled the operating system again and again, and I still have the same problem. What can I do next to install the network card? I am ignorant full when it comes to Windows/Apple stuff (I'm a Linux user, but I need a Windows PC to run specific working software) so thank you in advance for any help.

  Hello

  Welcome to the Microsoft community.

  It seems that the driver for the network adapter does not work on the computer. May not have been installed properly.

  Please answer these questions so that we can better help you.

  1. What is the brand and model of the computer?

  2 was the work of (internet) network adapter before the reinstallation of Windows 7?

  3. What is the status of the NIC in Device Manager?

  To check the status of the device,

  (a) press the Windows key + R , type devmgmt.msc and press enter.

  (b) to expand network adapters and verify a yellow exclamation point.

  (c) make a right click the adapter and click Properties and check the device status on the general tab.

  We have to download the drivers for the network card on the system manufacturers site and install it on this computer.

  Get back to us with the required information for we can help you.

• Restore HP Pavilion g6-2252sa Notebook PC to factory settings

  Can someone help

  I have a HP Pavilion laptop 2252sa g6. I want to restore the operating system back to factory settings.

  I can't make the hard disk recovery partition because it is not accessible. There is no recovery disk.

  What I got is the MS windows 8 keys. I was on the site of microsoft for re - install the software. Unfortunately, recvoery software says that my windows key 8 ms is not retail. (even if it's a valid key for ms windows 8 key). Where can I get hold of a copy of ms windows 8 running on this key?

  Concerning

  Parry

  Hello

  There are two options.

  1. you can order a set of replacement recovery disks - watching your model No. notebooks. You can live in the United Kingdom.  If that is correct, use the following link.

  https://www.best2serve.com/page/rcd_search?utm_source=HP-customer-care&utm_medium=referral&utm_campaign=RCD&utm_content=part_709042-031

  2 your laptop was initially provided with Windows 8, the activation key is stored in the chip of the Bios, so you could create your own Windows 8 OEM installation disc.  There is a cap for the Image file to download, you may need to try the period of a few hours.  Activation occurs automatically using this method as the key is read from the bios during the installation process.

  For more information about how to do this, see the post Hüffer 3rd on the following link.

  http://h30434.www3.HP.com/T5/notebook-hardware/need-product-key/m-p/2592099/highlight/false#M96668

  Best regards

  DP - K

• I have a HP Pavilion a1615.uk and I want to upgrade the hardware to run a 64-bit operating system.

  I have a HP Pavilion a1615.uk (RF783AA) and I want to upgrade the hardware so I can install a 64-bit operating system. What should I do to make a 64-bit system? It is an upgrade of the bios or it means new equipment?

  Thank you very much

  Mrsbex

  Hello

  Normally, for modern machines we only need the 64 bit operating system itself and the drivers appropriate to go with it. There is no need to upgrade the hardware except we may want more RAM to use the 64 bit OS.

  In your case, the machine is too old, my suggestion is to buy a new machine. In the long run, can be cheaper than buying part and piece of component to upgrade the existing.

  Kind regards

• I have been cheated against a Windows 7 CD duplicate, now I can my built in dos operating system.

  My built-in operating system is Windows Vista and my laptop is Hp pavilion dv6. I had a Windows 7 CD duplicate and installed it but now my office is white and it is written that this version is not authentic. Can I get my built in the operating system on my computer?

  Hi Lucie,.

  You have the disc in Windows Vista?

  Otherwise, you can contact the OEM (Original Equipment Manufacturer) of assistance for the Windows Vista disc and install the same.

  Alternatively, you can contact a Microsoft Product Activation Center by phone to solve the problem.

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929/en-us

  You can also see the following article for more information:

  Genuine Windows: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows/help/genuine/FAQ

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I have that one saved backup system, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  I run the Windows Image backup to a hard drive external on a weekly schedule. The result shows on the hard drive as "WindowsImageBackup\(User name)-PC\Backup (date) (number)"-currently about 80 GB (binary).

  I reserve about 135 GB of available space for backups of the system, so I save only the last backup of the system.

  So far, I have no problem with that.

  However, the disk hard, there is another folder '(USER NAME)-PC' & under which is a folder "backup of files (date) (number)" for each time that the backup system runs.

  These files vary considerably in size - for example, 1 GB, 12 GB, 22 GB. They delete or replace automatically - just, they accumulate.

  What I want to know is ~.

  What is the purpose\importance of these additional files?

  Since I only have a single saved backup, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  Original title: Windows Image backup

  Hello

  Thanks for the reply.

  File '(Computer name)-PC "contains the files necessary for the Windows. Data files saved in libraries, on the desktop, and if the Windows folders for all people with a user account on the computer are also recorded.

  [The default Windows folders include AppData, Contacts, desktop, downloads, Favorites, links, saved parties and searches.]

  The size of these files increases, because the content of the folders mentioned above increases.

  For more information, see the article mentioned below:

  How Windows selects the files to back up?

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Lightroom does not? I have "the files could not be copied to the backup location" notice appearing as I download from the camera. I ignore and click OK. I then edit my photos and try to export. Water is no longer an option and the exported wor

  5.7 Lightroom does not. I have 'some import options was made' - "files could not be copied to the backup location" notice appearing as I download the device. I ignore and click OK. I then edit my photos and try to export. Water is no longer an option and exported labor is the original and not the published work? What do I need to fix this?

  As Chetna asked, you export original?  Yes, you are. It is asking to export a copy of your original file, that is, of course, not changed. So, Yes, you won't see any of your changes. That's why you can not apply a watermark. Adding a watermark in the image he'd a file not original.

  Choose another value for the Format of Image under settings in the file.

  HAL

• Pavilion a6230n: How can I get the product code (UPC) for an HP computer?

  Hello, I'm selling an old HP desktop that I hang out on Amazon.

  But in order for me to post on Amazon, I need to create a new list, since nobody else is for sale. To create a new list, I need a product code unique for the desktop computer. I'm looking for the Universal Product Code (UPC). A UPC code is the bar code that would be tested at the point of sale when someone buys something.

  I have a few other computers, I'm trying to sell, and on the site Web of Toshiba, the first manual I opened a laptop shows me the UPC. HP manuals don't.

  I tried to call customer service. And both times I'm hung up or disconnected. It's very frustrating because I have a very basic question, and does not have I gotten a response yet.

  If someone can find the UPC for HP Pavilion a6230n and tell me how to get the Cup for HP products in the future, I would be very happy. Thank you!

  Hello @RYoder15,

  There is not much else I can suggest.  I tried at length to see if I could find anything in what concerns this information without success.  Maybe if you are able to find the product packed in the store?  I was able to find the product on Amazon here: HP Pavilion a6230n desktop PC

  I hope this helps.

  Kind regards!

• Reinstall the recovery partition - drive (e) on gn561aar of HP Pavilion a6230n desktop PC

  "HP Pavilion a6230n desktop PC
  Serial number: {removed privacy}
  Product number: gn561aar

  OS - W7 home premium 64-bit

  I had problems with the computer a few weeks ago and had to do a disk/partition Acronis backup restore. Drive C: / (and all my other readers) are working as they should but drive E:/where is the partition installed normal recovery does not restore properly. I recently had another problem and tried to do a restore using the partition HP recovery and got the error messages it is not found? I didn't use the Acronis since the results had already been mentioned.

  HP web site does not list my computer and I think I need to order a set of recovery from my web research disc, but I'm going in circles on the HP web site trying to find out where to order or send an email to technical support. Looks like HP wants just to sell their hardware and then completely dump you after disregarding needs later? I am very frustrated with HP because it seems that if you have not purchased the equipment in the last 90 days you're in their "rearview mirror" when it comes to help?

  I still have to call their phone support since I had 'experience' with their offshore support in the past and would really like to avoid new frustrating experience with the entire HP support system.  Why can't I just ask a question and get a resolution - is it too ask?  Apparently Yes...

  Can anyone help me to get what I need to replace the recovery on my desktop computer partition and get it all working properly again? Thank you in advance for any help that will help solve this problem. Robert

  Well, since the computer came with Vista, then the recovery partition will be of no other value to reinstall Vista, which I assume is not what is wanted.  If the Windows 7 install disk is always available, then reinstall Windows 7 on this disc and new departure.  Was the original Vista 32 bit and the new Windows 7 64-bit, so is not "upgrade was/is possible, but a new install anyway."  As the other 64-bit programs have been added after the upgrade to Windows 7, installers will need to be rerun to get install them after you have reinstalled Windows 64-bit.  Otherwise, the Acronis image can be used.  Unless HP has published this same model computer with Windows 7 64-bit, there is no HP support and hense no recovery partition. Sorry

• Mode of AHCI BIOS HP Pavilion A6230N

  I have a HP Pavilion Desktop PC, model No. A6230N and I am trying to configure the SATA controller to use AHCI instead of (I think) FDI, because I want to install OS X Snow Leopard as a second operating system on the computer, but nowhere in the BIOS is an option for me to change the SATA mode. In respect of SATA controller, I have only options for people with DISABILITIES, 1 SATA and SATA 1 + 2. Is there a way to change the SATA on this PC?

  Unfortunately, the Narra2 BIOS motherboard does not have the ability to switch the SATA controller in AHCI mode.