Trace graph XY forever hiding other parcels

Hello

I use a graph XY draw certain limits. These limits are indicated by the plot 0 and parcel 2 , that's why I put them to "Fill in positive and negative infinity" respectively.

It is, I now have another plot (trace 3) to display that fall into the 'limits' designed by plot 0 and 2. The result? Parcel 3 is covered almost entirely by the other plots with the "fill up to.." option.

TL; DR: is there a way to make the plot 3 display along its length without being under the filling for x infinite plots?

Current result:

Expected result:

Changing the order of the plots and setting limits to the end.

Tags: NI Software

Similar Questions

I need autoscaling on a graph XY to ignore a parcel

I'm doing the autoscaling to ignore one of the three locations on a XY Chart. My program trace a set of data points, that approach and exceed a critical level. My chart has three parcels: under the limit points are green points, points above the limit are red dots, and the limit is a horizontal dotted line extending between two points. Initially, endpoints of the line have been established in the vicinity of the x-values of data. Autoscaling worked very well, of course, but the line analyses as well as the data they are traced. This limit is a fixed value, I like the line to stretch completely on the screen and stand still.

To this end, I put endpoints beyond the limits of the x values. Now, auto-scaling of the tracks with the endpoints of the line and the actual data are compacted in the middle of the graph. Is it possible I can forward the autoscaling only with data points and ignore the line, or is the best option, just write my own code, autoscaling?

Thank you!

You could wirte your own automatic scale, but I think is easier to do something to change your horizontal line of a parcel of a cursor. You can use the list property of cursor or active (the control graph) the cursor property to control positioning and the color of the cursor, and you have not to worry ever its end points (there no).

Chris

3D active layer is hiding other layers in the timeline view non - 3D

I'm under 13.7.1 on PC version, 32 GB of Ram.
When I turn on 3D for a layer, I do not see them when I want to work on other non - 3D layers in the timeline panel. If I play the comp in preview I can see however.
To work on the computer, I spend all 3D layers. I only need 2 on the 16 layers to be 3D. It is surely not good?

Put your 'Active Caméra' camera. Or do all other 3D layers.

Try to hide all traces of The SIMS 2, other users, especially in Indexing Options

I tried to change the "Indexing Options" but that is the problem. It seems that any program that has a place in the "start > all programs" cannot be hidden by the Vista Start button search engine, no matter what you do in the "Indexing Options".

Is there maybe a way to remove programs from Sims of the ' Start > all programs "? I would like to have in one place, preferably in a folder that I can give a name without a report and give the password. And of course I need to hide all the search engine of the Start button.

... Any ideas? Any chance this type of capability is available in a program that I could buy?

Yes you can delete it. Just right click on the entry in the list of programs all and select "Delete" from the menu.

Trace another session in 9.2.0.6
Hello
I mainly use oradebug to framework 10046 trace event in the other session.
It works without problem, until I hit 9.2.0.6 old DB on WINDOWS 2000.
Whenever I use this approach
```
ORADEBUG SETOSPID &OSPID ;
ORADEBUG EVENT 10046 TRACE NAME CONTEXT FOREVER, LEVEL 12;
ORADEBUG TRACEFILE_NAME;


Traced process gives:
ORA-03113: end-of-file on communication channel
```
I tried exec dbms_system.set_ev(10,20,10046,12,''); unsuccessfully as well (same error).

How to deal with this kind of old software on Windows 2000?
Please advice with real life experience that I have read the doc :).
Concerning
GregG
It should work. bug seems to me. you know what's going to happen if you connect to a call then try the package dbms_support if its installed. get the sid series of the session you want.

You can install the pkg of rdbms/admin is it is not already.

run dbms_support.start_trace_in_session (: sid: series, wait-online true, lie-online false);
run dbms_support.stop_trace_in_session (: sid: series);

10046 trace is not to activate...
I tried allow 10046 thru Toad track and I don't get what I'm doing wrong... I get the error when I run the present in Toad or any other third party tool below...

ALTER session set tracefile_identifier = "test_look";

exec dbms_support.start_trace_in_session (-)
SID = > 527, -.
Series # = > 6515, -.
expected = > true,--
links = > true);

Select * from scott.emp;
Select ename from scott.emp;

-To disable tracing:
exec (dbms_support.stop_trace_in_session)
SID = > 527, -.
Series # = > 6515);

BEGIN dbms_support.start_trace_in_session)
SID = > 527
Series # = > 6515,
expected = > true,
links = > true); END;
Error on line 4
ORA-06550: line 1, column 7:
PLS-00201: identifier ' DBMS_SUPPORT. START_TRACE_IN_SESSION' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored

or y at - it another way I can get this done easily for my session? I can take a look at the trace file later... Thank you...

database is on 10.2.0.3

Published by: user630084 on March 31, 2009 06:36
Hello..

an easy way to draw your own session is...
```
alter session set events '10046 trace name context forever, level 12';
```
For package DBMS_SUPPORT sometimes is not installed by default. You can install the $ORACLE_HOME/rdbms/admin/dbmssupp.sql script running.

Published by: dask99 on March 31, 2009 08:39

XY graph slow in response

Hi all

I have 2 XY graphs in my VI and for some reason any 1 XY is super slow in response. I enclose my vi here which shows the behavior.

There are 2 XY graphs. The top is super slow in response and one below behaves normally.

Could someone please look at the vi and let me know what is the problem with the slow chart?

Thank you

Ritesh

Ritesh,

I think the data are written for graphics before changing the Visible property to false. I ran the Profiler and saw indications of quantity of memory used which resembled a copy was made for the chart slow, even when she was invisible.

When I put a structure of sequences in the nodes property and wired through the data in the graph, I can't slow it down or copies of additional data.

Consider that your chart has only 800 + pixels in width and you are feeding 200000 data points. The internal code of the chart should reduce these data the number of pixels on the screen. The x-axis data is linear. If you have reduced the data, especially at the end of the high frequency, it would probably speed things up. Also because the x-axis data is linear, you can use a waveform graph, and not the graph XY. I don't have test intensively, but with a waveform graph, it seemed much more quickly.

# I just noticed you have smoothed checked on the slow chart and not on the quick graph. Turn on other charts that slows them, too!

Lynn

extract data from text file to draw the graph

Hello

In the attached data file, I would like to extract the (real) % Freq column and then be able to plot them on a graph of % Freq vs other columns (i.e. % Freq vs Amp, or % Freq vs Test1...).

Any help will be greatly appreciated.

Thank you

hiNi.

hiNI,

There are a lot of questions to ask, but to answer your question immediately ' How do I parwse the necessary data as numbers? (see the attachment, png)

1. read worksheet

2 table subset rated 19

This should give you your numeric values for all your X and Y values.

Chazzzmd

create/remove graph sliders programattically

Hello

In LabVIEW 2011, we are working with a single-trace graph that updates periodically; We need to draw programmatically the sliders during the race, as new data become available. Initially, we just create a static array of cursors, made all invisible, then moved and makes them visible as they have become relevant; However, now we want to make the dynamic list. It is best done by reading the list of cursor, manipulate the table according to the needs, and then writing it in the chart, or is there better ways? The process is to identify peaks and valleys in a plot in ever-changing data. I find it interesting that the user can create new cursors manually, but there is no property to allow the same programmatically; Ditto for remove them; the user created cursors use the default attributes that are not adapted to our needs.

I am looking for the solution less long-term, and rewrite the entire table seems to be unnecessary performance degradation.

Maybe we should create new sliders in blocks to reduce the number of updates to list of cursor? I'd like to think the worst case is about 60 sliders, but as the peak detect algorithm is automatic, an unusual data signal could cause several hundred. The graph will survive even this? All the data will be, worst case, be something like 15000 data points. Experiences/pointers/warnings will be appreciated.

Thank you

Blair

Blair Smith wrote:

[...] It is best done by reading the list of cursor, manipulate the table according to the needs, and then writing it in the chart, or is there better ways?

I don't see any method to add a slider, so manipulate the table is the way to go. You could save the time it takes for the reading list reading it only once, at the beginning and adding to what your field evolves. You can limit updates to occur no faster that the operator can enjoy. If your data adds dozens of peaks in a fraction of a second, you could get away with adding them at once per second or more.

The multiplot XY graphs & Data Types

Currently working on four tracing data sensors of pressure on a XY plot, but up to this impossible. In addition, I do not know if I use the correct data type.

As you can see in the image below, my code is taking measures of the DAQ Assistant and proceeds to divide the data into four signals before taking their average. My predecessor was thought to build a matrix of these signals of four split with what I suppose is the timestamp. The problem is that only one set of data being plotted right now. I tried to change the order of things that I use a cluster as my data type, but I always feel to get an error.

Recently I saw this webpage https://decibel.ni.com/content/docs/DOC-5129 for more help, but imitating the way they don't seem to work for my code.

Can anyone help?

All I see are 1 d arrays. A matrix in LabVIEW is special data type used for... you guessed it, matrix calculations. Do not use it interchangeably with table.

The main problem is that you send a single cluster in the XY graph, which means a single parcel. What you want is an array of clusters. The clusters will be a beam of table 1 d of timestamps and D 1 table of measures. But it is the hard way to do it, and this means you need to keep all your data as the tracks of the loop, with a lot of unbundling, build tables and rebundling. Crossrulz wrote a great nugget on How to use a sporadic data graphic , which makes things much easier, because the chart holds the story for you. Take a look at this post, and if you want to have several plots, you can just make a table of the waveforms, as I did below. Where you see the 'random number' dice, you will put your unique measurement data you acquire every time as the iteration of the loop. You can test the program by running and clicking on the Add Point"" button.

UPDATE GRAPH AND DISPLAY DRIVERS

HI CAN SOMEONE HELP, I'M TRYING TO RUN MINECRAFT PC ON MY LAPTOP OF SON, BUT IT SAYS I HAVE TO UPDATE THE DRIVERS. ITS A LENOVO 3000 N200 WHAT SOMEONE KNOW HOW TO DO THIS PLEASE?

Through the Lenovo support site, but it maybe provided graphics drivers do not support the game, in which case you can't use this program

And you cannot update a graph of laptops in other

If a desktop computer, you can buy a third party graphics card.

trace file not found

using linux 5.7 (32 bit) and oracle 11 g relase 2

SQL > select name, value from v$ diag_info;

NAME
----------------------------------------------------------------
VALUE
--------------------------------------------------------------------------------
Diag activated
TRUE

Basis of the ADR
/ Home/Oracle/u01/app/Oracle

Home of the ADR
/ Home/Oracle/u01/app/Oracle/diag/RDBMS/looking4/looking4

NAME
----------------------------------------------------------------
VALUE
--------------------------------------------------------------------------------
Trace of Diag
/ Home/Oracle/u01/app/Oracle/diag/RDBMS/looking4/looking4/trace

Diag warning
/ Home/Oracle/u01/app/Oracle/diag/RDBMS/looking4/looking4/Alert

Diag incident
/ Home/Oracle/u01/app/Oracle/diag/RDBMS/looking4/looking4/incident

NAME
----------------------------------------------------------------
VALUE
--------------------------------------------------------------------------------
Diag Cdump
/ Home/Oracle/u01/app/Oracle/diag/RDBMS/looking4/looking4/cdump

Health monitor
/ Home/Oracle/u01/app/Oracle/diag/RDBMS/looking4/looking4/HM

Default Trace file
/ Home/Oracle/u01/app/Oracle/diag/RDBMS/looking4/looking4/trace/looking4_ora_4327
.TRC

NAME
----------------------------------------------------------------
VALUE
--------------------------------------------------------------------------------

Count of active problem
0

Active County Incident
0

11 selected lines.

now when I check
ls - al looking4_ora_43 *.
-rwxrwxr-x 1 oracle oinstall 2960 22 August at 09:59 looking4_ora_4300.trc
-rwxrwxr-x 1 oracle oinstall 182 22 August at 09:59 looking4_ora_4300.trm
-rwxrwxr-x 1 oracle oinstall 2957 17 Aug 10:29 looking4_ora_4306.trc
-rwxrwxr-x 1 oracle oinstall 180 17 Aug 10:29 looking4_ora_4306.trm
-rw - r - 1 oracle oinstall 2957 30 August at 10:38 looking4_ora_4325.trc
-rw - r - 1 oracle oinstall 181 30 August at 10:38 looking4_ora_4325.trm
-rw - r - 1 oracle oinstall 2956 24 August at 15:56 looking4_ora_4380.trc
-rw - r - 1 oracle oinstall 181 24 August at 15:56 looking4_ora_4380.trm
-rwxrwxr-x 1 oracle oinstall 2942 14 August at 10:18 looking4_ora_4394.trc
-rwxrwxr-x 1 oracle oinstall 178 14 August at 10:18 looking4_ora_4394.trm
[oracle@unknown485b39d0b515 path] $ pwd
/ Home/Oracle/u01/app/Oracle/diag/RDBMS/looking4/looking4/trace

So where is
looking4_ora_4327?
Thanks in advance

There is no trace file to your/home/oracle/u01/app/oracle/diag/rdbms/looking4/looking4/trace/looking4_ora_4327, because the current user's session is not under the tracing. See the example below:

I have connected as a user scott and here is the result:

SQL> column value for a50;
SQL> /

NAME                                                             VALUE
---------------------------------------------------------------- --------------------------------------------------
Diag Enabled                                                     TRUE
ADR Base                                                         e:\app\serverroom
ADR Home                                                         e:\app\serverroom\diag\rdbms\orcl\orcl
Diag Trace                                                       e:\app\serverroom\diag\rdbms\orcl\orcl\trace
Diag Alert                                                       e:\app\serverroom\diag\rdbms\orcl\orcl\alert
Diag Incident                                                    e:\app\serverroom\diag\rdbms\orcl\orcl\incident
Diag Cdump                                                       e:\app\serverroom\diag\rdbms\orcl\orcl\cdump
Health Monitor                                                   e:\app\serverroom\diag\rdbms\orcl\orcl\hm
Default Trace File                                               e:\app\serverroom\diag\rdbms\orcl\orcl\trace\orcl_
                                                                 ora_8056.trc

This means, if my session track, so I check the file e:\app\serverroom\diag\rdbms\orcl\orcl\trace\orcl_ora_8056.trc for this session right? OK, what happens if I disconnect and reconnect:

NAME                                                             VALUE
---------------------------------------------------------------- --------------------------------------------------
Diag Enabled                                                     TRUE
ADR Base                                                         e:\app\serverroom
ADR Home                                                         e:\app\serverroom\diag\rdbms\orcl\orcl
Diag Trace                                                       e:\app\serverroom\diag\rdbms\orcl\orcl\trace
Diag Alert                                                       e:\app\serverroom\diag\rdbms\orcl\orcl\alert
Diag Incident                                                    e:\app\serverroom\diag\rdbms\orcl\orcl\incident
Diag Cdump                                                       e:\app\serverroom\diag\rdbms\orcl\orcl\cdump
Health Monitor                                                   e:\app\serverroom\diag\rdbms\orcl\orcl\hm
Default Trace File                                               e:\app\serverroom\diag\rdbms\orcl\orcl\trace\orcl_
                                                                 ora_8752.trc

This means, now I'll look in e:\app\serverroom\diag\rdbms\orcl\orcl\trace\orcl_ora_8752.trc for any information of tracing; only if it's to be see trace:

SQL> host dir e:\app\serverroom\diag\rdbms\orcl\orcl\trace\orcl_ora_8752.trc;
 Volume in drive E is HCL_DISK3
 Volume Serial Number is A62A-F491

 Directory of e:\app\serverroom\diag\rdbms\orcl\orcl\trace

File Not Found

SQL> alter session set events '10046 trace name context forever,level 12';

Session altered.

SQL> host dir e:\app\serverroom\diag\rdbms\orcl\orcl\trace\orcl_ora_8752.trc;
 Volume in drive E is HCL_DISK3
 Volume Serial Number is A62A-F491

 Directory of e:\app\serverroom\diag\rdbms\orcl\orcl\trace

30-08-2012  13:39                 0 orcl_ora_8752.trc
               1 File(s)              0 bytes
               0 Dir(s)  121,181,003,776 bytes free

SQL> alter session set events '10046 trace name context off';

Session altered.

SQL> host dir e:\app\serverroom\diag\rdbms\orcl\orcl\trace\orcl_ora_8752.trc;
 Volume in drive E is HCL_DISK3
 Volume Serial Number is A62A-F491

 Directory of e:\app\serverroom\diag\rdbms\orcl\orcl\trace

30-08-2012  13:39                 0 orcl_ora_8752.trc
               1 File(s)              0 bytes
               0 Dir(s)  121,181,003,776 bytes free

SQL>

So, in short, you get the trace file, if the current session is currently tracing.

Concerning
Girish Sharma

Is Oracle 9i - possible to trace the amount of rollback instructions?
Hello

We lack Oracle 9.2.0.5.0, and we need to monitor the amount of rollback statements executed on a specific table.
Marketing of traces for "set Event 10046 trace name context forever, level 1' ' would be too intrusive in light of the current system load that I was wondering if there is no faster way to do.

Thanks in advance!

Mike
Maybe you can use minor journal to search in the column the OPERATION of v $ LOGMNR_CONTENTS ROLLBACK?

10053 - no trace file is generated
Hello

No 10053 trace file is generated in the diag directory.

SQL_Trace = true
trace_enabled = true

I put

ALTER SESSION SET TRACEFILE_IDENTIFIER = "TEST";
' ALTER SESSION SET EVENTS = 10053 trace context name forever, level 1;

but there is no trace file generated.

Something seems to be missing.

Any help would be appreciated!

Best regards
user11368124
You do a lot of different things at the same time...

Why are you doing a select * from plan_table - you will be followed this statement as well?

You don't want to do a 'plan to explain,' you just want to run the current statement.

trace of the user with bind variables
Hi all

10.2.0.4 on solaris 10

Followed a user session, once the connection to the database, using the below
```
create or replace trigger login_trigger 
after logon on database 
  begin 
     if (USER in ('MED','MEDT')) then 
execute immediate 
    'ALTER SESSION SET EVENTS ''10046 TRACE NAME CONTEXT FOREVER, LEVEL 4'''; 
     end if; 
  end; 
/  
```
I understand that the level 4 will be the value of the variables bind inside... but isn't the generated trace file
the value of the variable bind as you can see below
```
PARSE ERROR #7:len=261 dep=0 uid=196 oct=3 lid=196 tim=12004802132819 err=907
select :"SYS_B_0"  from ORM_RESTRICTED_CAT_BAL_ORD where (((CONTRACT_CAT=:b0 and ORDER_NO=:b1) and PREPOST_PAID in (:b2:b3,:"SYS_B_1")) and ((TRUNC(SYSDATE)>=
TRUNC(FROM_DATE) and TO_DATE is null ) or TRUNC(SYSDATE) between TRUNC(FROM_DATE) and TRUNC(TO_DATE)))
```
Am I missing something?
KaiS wrote:
=====================
PARSE ERROR #7:len = 261 dep = 0 = 95 oct cover 3 = uid = 95 tim = 12005421332712 err = 907
Select: 'SYS_B_0' from ORM_RESTRICTED_CAT_BAL_ORD where (((CONTRACT_CAT =: b0 et ORDER_NO =: b1) and PREPOST_PAID in (: b2:b3,: 'SYS_B_1')) and ((TRUNC (SYSDATE) > =)))
TRUNC (from_date) and TO_DATE is null) or trunc (sysdate) between TRUNC (FROM_DATE) and TRUNC (TO_DATE)))

Looks like you got a parse error. You got yet to the phase of binding of variables again so I don't expect to see in the trace file.

Trace graph XY forever hiding other parcels

Similar Questions

Maybe you are looking for