Traced the paths of a Live object selection

Similar Questions

• Y at - it a script that will be the image draws a raster object selection?

  Hello! Here's my problem:

  I need to run Image Trace - with a specific preset - more Action on each object of a selection. So, basically, I want to run the Trace of the Image (default) + current Action on every object in my selection.

  Is there already a scrip there and if not how would I build one? I am new to scripting, which means that I have basically no idea of what I'm doing. Can someone help me?

  Sorry,

  a bad line of code on my part has been the origin of the problem.

  Line 14 to the controls of the code for an element of the frame

  I was testing just the object itself.

  I should have tested its typename.

  Replace this line with this:

  if(sel[i].typename == 'RasterItem'){
  

  that should solve the problem

• How to activate the path with the subtractions in selection

  Hello

  This is my first post here and I must say that I thank, you are here because I'm pretty frustrated.

  I am new to using the pen tool. For the last day or two, I'm working on it pretty hard in Photoshop CC and I think I have a general handle on how it basically works now, but can't get to a domain.

  I just finished a rather complex path. After doing the outdoor path, always using the pen tool, I changed the tool of "combining forms" to "subtract the shape front" and make internal cuts of the way that I wanted. When I had finished, I thought that everything I would need to do is to hit the icon selection at the bottom of the path window and a complete selection, including the subtractions would be taken. Unfortunately when I did only the subtraction have been included in the selection even though they were clearly there in the path. Please can someone explain what can happen here?

  Thank you

  The outermost path does not have the value "Combining forms" or "Exclude the shapes overlapping" or it is not the subPathItem facing down.

  Select it, and then change the setting in the Options bar (window > Options) or simply select all the subPathItems and put them to "exclude the shapes that overlap.

  

• ' Extract the path of ' path ' object

  Once you have used a path type, how do you get back? Everything I do to retrieve the path removes it.

  

  Witht select direct selection tool (white arrow) only the path.

  If you select a single seghment, and then press and hold the command key or control down and xselect the other segment as it might look like the entire path is selected but that may not be the case if control or control and click on the other segment.

  The copy and paste or copy it and paste it in the front or rear.

  

  Ther above only one segment has been selected, I also had to order select the other understands even looks selected

  

  Now in the future if you need keep the path simply make the type on a path on a copy of the path.

  Hope this helps

• How to get the path (using < input type = "file" / >)

  Hello world

  I create a HTML form that has an entry of type = "file".  This will give you a dialog box browse for your user to search for a file on the operating system.

  And my code:

  function handleFileSelectForMyShop (evt)
  {
  var blnFileReaderSupported = false;

  Try
  {

  Debug.log ("handleFileSelect", "start handleFileSelect");
  reader of var = new FileReader();
  blnFileReaderSupported = true;
  var files = evt.target.files;
  var size = files.length;

  Debug.log ("handleFileSelect", "handleFileSelect # selected files:" + size, debug.info);

  for (var i = 0; i)< size;="">
  {
  Debug.log ("handleFileSelect", "in the handleFileSelect analysis the index file" + i, debug.info ");
  var f = files [i];
  Reader.OnLoad = (function (theFile)
  {
  Debug.log ("handleFileSelect", "start reader.onload", debug.info);
  return Function
  {
  Debug.log ("handleFileSelect", "start Function", debug.info);

  Debug.log ("handleFileSelect", "reading file" + theFile.name + "(" + theFile.size + "") "" + theFile.type, debug.info);

  If (theFile.type.match ('image.*')) {}
  var path = e.target.result;
  alert (path);
  create the path

  } else {}
  jAlert ("Please select photo!', 'Error'");
  }
  };
  })(f);

  If ((f.type.match ('image.*')) |) (f.type.match ('audio.*')) | (f.type.match ('video.*')))
  {
  Debug.log ("handleFileSelect", "in handleFileSelect call reader.readAsDataURL for type" + f.type, debug.info);
  Read in the media file in the form of a data URL.
  reader.readAsDataURL (f);
  }
  }

  Debug.log ("handleFileSelect", "Complete", debug.info);
  }
  {} catch (e)
  Debug.log ("handleFileSelect", e, debug.exception);
  If (! blnFileReaderSupported)
  {
  Alert('Error.) The FileReader API is not supported. ") ;
  }
  }
  }

  function doPageLoad()
  {
  Try
  {
  ELE var = document.getElementById ('txtFile_staffInfo');
  If (ele)
  {
  ele.addEventListener ('change', handleFileSelectForMyShop, false);
  }
  imgSelectPictureClick = 0;
  }
  {} catch (e)
  Debug.log ("doPageLoad", e, debug.exception);
  }
  }

  window.addEventListener ("load", doPageLoad, false);

  Note: And alert (path) leads to a Base64 string! It is not a path of the image that I browse a Spain file on the operating system.

  I want to have a full path of the file. For example: file:///accounts/1000/appdata/WebWorksAppTemplate.testa3NBcHBUZW1wbGF0ZSAgICA/shared/camera/image01.jpg

  I hope to see your reply soon!

  Thank you and best regards,

  A Pham

  A Pham

  I think that you can not get the absolute path of a file due to browser security, when you use the

  It's something that you need probably a PlayBook extension for.

• The term 'Select-Object-property' is not recognized as a cmdlet, function, script file or executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  I have a fairly new version of PowerCLI (5,5 Rel 1) 5.5 being ESXi and vCenter.

  I also checked that automation. Core is installed:

  PowerCLI C:\Windows\system32 > Get-PSSnapin VMware.VimAutomation.Core

  Name: VMware.VimAutomation.Core

  PSVersion: 2.0

  Description: This Windows PowerShell snap-in contains the Windows PowerShell cmdlet

  TS of vSphere management.

  but after connecting to vCenter, I get error trying to run:

  PowerCLI C:\Windows\system32 > $Results = ForEach ($DRSRule to $DRSRules)

  > > {}

  > > «|» Select-Object-Property @{N = 'Cluster'; E = {(Id-vue-Get $DRSRule.Clust)}

  amplifier. {{ID). name}}.

  > > @{N = "Name"; {E = {$DRSRule.Name}}.

  > > @{N = "enabled"; {E = {$DRSRule.Enabled}}.

  > > @{N = 'Type of DRS'; {E = {$DRSRule.KeepTogether}}.

  > > @{N = "MV"; E = {$VMIds = $DRSRule.VMIds - split ","}

  > > $VMs = ForEach ($VMId to $VMIds)

  > > {}

  > > (Get-View-Id $VMId). Name

  {> >}

  {{> > $VMs - join ","}}

  {> >}

  > >

  The term 'Select-Object-property' is not recognized as a cmdlet, fu

  function, script file or executable program. Check the spelling of the name, or if

  a path was included, make sure the path is correct and try again.

  On line: 3 char: 32

  +     "" | Select-Object-Property < < < < @{N = 'Cluster'; E = {(Get-view-Id $DRSRule

  . {{Cluster.Id). name}}.

  + CategoryInfo: ObjectNotFound: (Select-Object-property string :)

  [], CommandNotFoundException

  + FullyQualifiedErrorId: CommandNotFoundException

  PowerCLI C:\Windows\system32 > Add-PSSnapin VMware.VimAutomation.Core

  Is ' Select-Object-Property not installed?  If not, where I get it, please?

  see you soon

  KC

  Note, I received this Dean here code: PowerCLI: extraction rules DRS; Deans blog

  There should be a space between the - Property parameter and Select-Object

• "selection of object by the path only" in Indesign?

  Hi, I have just changed to cs4 to 5.5 and can't seem to select an object, if it is another, even if the top element of a 'none' was complete. I know that I can hold cmd and select "via" objects but in cs4, I didn't need to do it as long as the top item had no fill. This preference can be enabled/disabled through the "selection of object by the path only" checkbox in illustrator, but I can't seem to find it in Indesign. Maybe I'm lazy who want to simply do not press the cmd button but it's just annoying the hell out of me for any clarification would be much appreciated.

  Ant.

  Hey Ant,.

  You use the 'Frame' Rectangle tool or the tool 'Rectangle '? I find that I selected the 'Frame' Rectangle tool, it will always be the selected object, even if it has no fill; using the "Marquee" tool, if it has no fill, you can select the objects below it without going through CMD-click.

  Hope that helps,

  See you soon!

  Mikey

• Why aren't my live paint selection tool and direct selection indicating when objects are selected?

  In the document 'A', when I use the live paint selection tool click on a segment of my live paint group, this segment becomes "gray" or "pixelated" to indicate that I have selected it.

  In the document 'B', no indication at all when a live painting segment is selected.  It has the same appearance as a segment not selected.

  I am using the same tool & selection of segments in the same way both times.  I even experienced and pasted the same live paint group in both documents, to confirm that the appearance of the selected segments did not differ between the two documents.

  Even my regular direct selection tool is not indicating when a path or object is selected in the document 'B'.   There must be some setting or preference that differs between the two documents.    Someone has an idea it might be?  Also, is there a way to restore all the settings by default in a single shot, so I don't run into these problems of 'settings' elsewhere?

  I use Illustrator CS3.  I would appreciate any ideas!  Thank you.

  Doc 'A' - live paint Group segment is highlighted when I select with the live paint Selection tool...

  

  ... Again in the document seems mysterious 'B', the segment the same chosen as not selected!

  

  Is "Show Edges?

  Press Cmd (Win: Ctrl) + H

• I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

  I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

  What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
  e '.

  example of extractedb.txt information:

  [email protected]

  [email protected]

  [email protected]

  * has a random number of emails as well *.

  I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

  Any help would be great = D

  Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

  game of mf to ((path to the folder as text) & "mail_list.txt")

  the value mf_List to {}

  the value sel_addr to {}

  the value mf_List to paragraphs of (read file mf)

  the value sel_addr to (choose from the list mf_List with title ¬

  ('Mail list' with multiple selections allowed without empty selection allowed)

  If sel_addr is equal to false then

  Error number-128

  return

  end if

  If length of sel_addr is equal to 1 then

  sel_addr display dialog box as text

  on the other

  the value Point to the text of TID to AppleScript delimiters

  the value Point text in AppleScript return delimiters

  display the dialog box elements of sel_addr in the text

  the value Text of point AppleScript delimiters to TID

  end if

  return

• Create the directory objects with the path environment variable

  I need to create a directory object and wonder if it's valid to use an environment variable in the nom_chemin?  Example:

  CREATE or REPLACE DIRECTORY XMLDIR AS ' $ORACLE_HOME/rdbms/xml ";

  I read the following in the Oracle 11.2 documentation, but it is is not clear to me if an environment variable is allowed or not.  My reason for wanting to use a variable of environment as opposed to hard coding is for when I update, I have no back reference to the old House of Oracle.

  nom_chemin

  Specify the name of the full path of the directory on the server where the operating system files are located. Single quotes are required, so that the path name is case-sensitive.

  > I see that many developers have created objects to directory with the environment variables in the path.

  Please post reproducible test

  You know & realize that the Oracle database is independent of the operating system (OS)?

  Environment variable is OS specific.

• No filter when the smart object selected

  I want to convert photo into painting in oil. I followed the instructions online on Youtube and convert the photo to a smart object. The next step is to open the filters and the Gallery of selection filters, but when I do this the filter Gallery is not available. What's wrong?

  Suggest you to reset the Photoshop preferences and then try

  Refer to this article: helps Photoshop | Preferences

  and make sure the image is in RGB mode and 8bits/channel

• Traced effect will not smooth out the corners of the path more

  Hello

  I used "wright - on effect" to draw a path on a map and until this AE ' "my corners rounded, which is exactly what I want, but suddenly with the following key frames he draws the path exactly at the points (without smoothing the corners).

  Is there a way to change this?

  thinner respectively thicker paths are 2 "write - we separate objects ' (due to the fact I had this problem before, I continued with another)

  

  I use Adobe CS6 AE 11.0.0.378

  Kind regards

  Guti

  Highlight the tops of mask path, right click and change the spation Bezier interpolation.  Then use the path updated the mask in Write-On.

• By SELECTING the _id of the path root

  SELECT THE ID

  PARENT_ID,

  SYS_CONNECT_BY_PATH (ID, ' / ') PATH.

  LEVEL LEVELL,

  SUBSTR (SYS_CONNECT_BY_PATH (ID, ' / '), 2, LENGTH (SYS_CONNECT_BY_PATH (PARENT_ID, ' / '))-LEVEL) TOP_ID

  OF PLANT

  WHERE ID <>40005561

  CONNECT ID PARENT_ID = PRIOR

  START BY PARENT_ID IS NULL

  BROTHERS AND SŒURS ORDER BY SORT_CRITERIA;

  path levell top_id (here should be only one id how to select first node in path? my query doesnot consider )

  / 40005037	1
  / 40005037/40005038	2	40005037
  / 40005537	1
  / 40005537/40005577	2	40005537
  / 40005537/40005577/40005561	3	40005537/4000557
  / 40005537/40005577/40005563	3	40005537/4000557
  / 40005537/40005577/40005564	3	40005537/4000557
  / 40005537/40005577/40005565	3	40005537/4000557
  / 40005537/40005577/40005567	3	40005537/4000557
  / 40005537/40005577/40005568	3	40005537/4000557
  / 40005537/40005577/40005569	3	40005537/4000557
  / 40005537/40005578	2	40005537
  / 40005537/40005578/40005579	3	40005537/4000557
  / 40005537/40005578/40005580	3	40005537/4000557
  / 40002718	1
  / 40002718/40001349	2	40002718
  / 40002718/40001349/40003347	3	40002718/4000134
  / 40002718, 40001349, 40003347, 40002846	4	40002718/40001349/400033
  / 40002718/40001349/40003347/40002846/40005058	5	40002718, 40001349, 40003347, 40002
  / 40002718/40001349/40003347/40002846/40005762	5	40002718, 40001349, 40003347, 40002
  / 40002718/40001349/40003347/40002846/40005458	5	40002718, 40001349, 40003347, 40002
  / 40002718/40001349/40003347/40002846/40005737	5	40002718, 40001349, 40003347, 40002
  / 40002718/40001349/40003347/40002846/40005769	5	40002718, 40001349, 40003347, 40002
  / 40002718/40001349/40003347/40002846/40012544	5	40002718, 40001349, 40003347, 40002
  / 40002718/40001349/40003347/40002846/40012544/40012562	6	40002718/40001349/40003347/40002846/4001
  / 40002718/40001349/40003347/40002846/40012544/40012582	6	40002718/40001349/40003347/40002846/4001

  Hello

  If you don't need get the first element in the path, you could do it using SUBSTR or REGEXP_SUBSTR, as shown below:

  SELECT SYS_CONNECT_BY_PATH (ename, "/") AS path

  , SUBSTR (SYS_CONNECT_BY_PATH (ename, ' / '))

  2

  , INSTR (SYS_CONNECT_BY_PATH (ename, ' / ') |) '/'

  , '/'

  2

  ) - 2

  ) AS substr_path

  , REGEXP_SUBSTR (SYS_CONNECT_BY_PATH (ename, ' / '))

  , '[^/]+'

  ) AS regexp

  CONNECT_BY_ROOT ename as root

  FROM scott.emp

  START WITH mgr IS NULL

  CONNECT BY PRIOR empno = mgr

  ;

  Output:

  REGEXP SUBSTR_PATH ROOT PATH

  ------------------------- ----------- ----------- -----------

  KING KING KING BEDROOMS

  / KING JONES, KING KING KING

  / KING/JONES/SCOTT KING KING KING

  / KING/JONES/SCOTT/ADAMS KING KING KING

  / FORD/JONES/KING KING KING KING

  / KING KING KING KING/JONES/FORD/SMITH

  / KING/BLAKE KING KING KING

  / ALLEN/BLAKE/KING KING KING KING

  / KING/BLAKE/WARD KING KING KING

  / KING/BLAKE/MARTIN KING KING KING

  / KING/BLAKE/TURNER KING KING KING

  / KING/BLAKE/JAMES KING KING KING

  / KING/CLARK KING KING KING

  / MILLER/CLARK/KING KING KING KING

  But you don't need to.  CONNECT_BY_ROOT is simpler and more effective.

• Change the path selection

  Hello

  do I have to put a maintanace host when I wan´t to chang the selection of the path to a lun, while vm´s are running?

  Frank

  Simple answer no

• What determines the strategy of selection of the path?

  If I attach just an ESXi host to a SAN that has one or multiple LUNS, how the strategy of selection of the path will be selected?

  It will always be SRM at the beginning? Or could itself select for fixed DS?

  to be more precise - claiming rules do not define the default PSP. Only, they define what Multipath ESX Plugin will use for the corresponding rule.

  Then the Plugin will be pickup the plugin of Type array of specific (ATAS) storage for storage device you or will use the default if there is no matching ATAS.

  Each HOME has its default path of selection Plugin, but you can always change it by using the ESXCLI command.