How to activate the path with the subtractions in selection

Similar Questions

• How to activate the old Windows XP with new serial numbers?

  \How to activate the old Windows XP with new serial numbers?

  You use a retail disk you had?  If so, then the keys do not work due to the fact that they keys of volume.

• How to activate the pop-up windows?

  I can't fill a demand for services with ASCAP because I've not enabled popups. So, how to activate the pop-up windows?

  You can uncheck the block pop-up windows under the Orange Firefox button > Options > Options > content tab.

  See more details here

• How to activate the BT on the Satellite C660-184?

  Toshiba produces online information continues to tell me that the Bluetooth 3.0 is available for my computer, but annoyingly not to tell me how I can get it.

  It would be useful that this information came with a link that I can use to act on the information.

  Does anyone know how bluetooth can be enabled on my computer?

  All the info and the latest BT downloads, you can find the portal of Toshiba BT - http://aps2.toshiba-tro.de/bluetooth/

  How to activate the BT?
  Activate WLAN first and when WLAN led on the key FN + F8 use combination and allow to BT

• r204tx: how to activate the deletion warning on hp computer laptop r204tx

  Hi all!

  Recently I bought hp laptop r204tx with Win. 8.1 - 64 bit, however, whenever I want to delete any file, folder, etc. I press the button Delete and deletes directly without any warning or alert!

  Please, help me to solve this problem and enable the alert message for the delete option...

  Thanks in advance!

  How to activate the Confirmation alert delete:

  http://www.askvg.com/how-to-enable-delete-confirmation-dialog-box-in-Windows-8/

• Satellite Pro U200 - how to activate the bluetooth connection

  How to activate the bluetooth connection?

  Hello

  First check to see if your computer supports BT
  If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
  If there is no label then your machine was not equipped with internal BT module!

  If the laptop supports BT, then use the FN + F8 key to go to the BT
  Then BT should start installation and configuration.

  For more details, see this forum and this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

• How to activate the LCD in Satellite C850-B374 sensor after the BIOS update?

  Hi, friends

  I m currently a customer satisfied with Toshiba since April 2013. I've been using laptops since 2007 after using different brands, I found Toshiba to be good.

  I recently updated the Bios from 6.0 to 6.50 of the Toshiba service station.
  Update was successful and the computer works fine.

  But after restarting the LCD sensor that activates the power button in this model of laptop does not work. After entering the utility parameter that I came to know that CE of bios version is 6 and bios version 6.50 so how to activate the sensor lcd start automatically while I open the lcd screen

  Ashik

  > How to activate the sensor lcd start automatically while I open the lcd screen

  You want to start Notepad by opening the cover. Right?
  In this case you should enable the option in the system of Windows 8 settings

  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  "You need to find the option called: + open Panel - Power On" feature.
  This option must be enabled in order to automatically start the computer when the display lid is opened

• Satellite Pro A100 - how to activate the shortcut keyboard-support on Vista?

  Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:

  1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
  2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?

  Thanks in advance
  Best regards
  Christian

  Hello

  These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.

  Here you can download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• How to activate the icon of speaker on the CONNECTED screen selection?

  How to activate the icon of speaker on the CONNECTED screen selection?

  Hi leross,.

  I don't know what app you ask on the sound settings for your Apple Watch.  But, in general, you choose your Apple Watch as a source for your music.  Once you pair your Apple Watch with a bluetooth headset, you will be able to adjust the volume.

  Listen to music on your Apple Watch

  Play music from your Apple Watch

  You can also enjoy the music on your Apple Watch without your iPhone when you pair with a Bluetooth headset. Open the music application, scroll up, then on your Apple Watch to choose it as a source. Then scroll down and tap one of these options:

  • Playback in progress. Play / pause what is currently playing on your Apple Watch.
  • My music. After a sync a playlist to your Apple Watch, you can browse your music by Albums, artists and songs.
  • Playlists. Follow the steps below to sync a playlist to your Apple Watch.

  Take care

• Qosmio F50-126: how to activate the integrated graphics card?

  Running Windows 7 on F50 - 126.
  After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.

  Manufacturer: NVIDIA;
  type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
  memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
  memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
  connected bus: PCI Express 16 x

  I want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
  Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.

  The computer seems to work at full power.
  Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?

  I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?

  Hi mate

  I'm a bit confused of m.
  Why?
  Because you ask about activation and deactivation of the graphics card (integrated).

  First of all, there is ONLY a single graphic chip!
  It s a GeForce 9700 M GTS graphics card.

  The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!

  In addition, the chip supports shared system memory. It depends on the available main memory!

  For example:
  * With the help of Win 32 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
  TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1279MB
  TOTAL available graphics memory: 1791 MB

  * With the help of Win 64 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB
  TOTAL available graphics memory: 1279MB

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1791
  TOTAL available graphics memory: 2303

  As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM

• How to activate the range high voltage E364Xa power adapter

  I use E364Xa power supplier code example downloaded with the driver E364Xa the Web site of NOR. I need the output in the range of high voltage voltage. Please see attachment tha. But the example code has been an error when the output voltage is greater than the range of low voltage. The default setting for the equipment is low voltage range. Does anyone know how to activate the range high voltage before you configure the output voltage?

  Problem solved. I found the order of output range VI.

• How to activate the avg firewall on in the 2012 edition

  How to activate the avg firewall on in the 2012 edition, when I scanned with mcafee his watch this avg firewall is disabled. only windows firewall is enabled, then how to activate the avg firewall on. Please, help me to overcome this problem.

  Hello

  Running several programs to firewall on your computer at the same time could cause conflicts. It is best to use a firewall program. If you want to disable the windows firewall, see the following:

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  You should now be able to activate the avg firewall. If not, contact moy.

  (p.s. to true for antivirus - you should only use 1)

• How to activate the Sleep function to put the computer to sleep if a program is open?

  I have Windows Vista basic on a desktop Dell 530.  I found that if I have a program or application running (such as I-tunes or windows media player) then the Sleep function will not put the computer to sleep.  How to activate the Sleep function to replace these programs and put the computer to sleep?

  Note: This is how it was with windows XP, the Sleep function would put the computer to sleep no matter what was running, he was reliable, if you left the computer and I forgot that you had something running.

  Thanks for your help.

  Hi kevino4130,

  If you disable sharing on your computer (not only the power settings) of media, it should allow him to enter the mode 'sleep'.

  See if that does not solve your problem and let us know.

  Dave D

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  Hello markward4905

  You should be able to download the drivers from the website of the manufacturer of your web cam.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How to activate the plug ins for WPM 11 on Windows Vista Home Premium 32 bit OS? __

  Cannot read dvd OMP. DVD will not auto play and got an error msg stating that the plug-ins have been disabled.  How to activate the plug ins?  I can't reinstall/repair WPM 11 under Vista.  I tried to update without success.  I ran sfc / scannow and there are no errors, found no errors or corrupted files.  Please indicate how do 11 WPM version 11.6002.18065 not work on my Vista Home Premium 32 bit OS! plug-ins have been disabled in 11 OMP

  I have installed a codec pack k - lite with no luck!

  Hi kikstart2,
   
  For the CD/DVD drive problem, try the following steps.
  1. visit the following Web site, click the "Run now" button and follow the instructions in the wizard to run the tool: http://support.microsoft.com/gp/cd_dvd_drive_problems
  2. once the tool is running, restart the computer.
  3. Insert the CD / DVD and check if it works very well.
   
  NOTE: There is no option to repair/reinstall Windows Media Player on Windows Vista.
   
  If the problem persists, restore the computer to an earlier time when everything worked well. To do this, try the following steps.
  1. Click Start, type system restore in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. click on choose a different restore point and then click Next.
  3. click on a date on which the issue moved not.
  4. click on next.
  5. click on finish.
  6. check if everything works well.
   
  For more information see what is system restore?
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How to activate the search function.  I get no match found when I search for words on the scanned PDF document

  How to activate the search function.  I get no match found when I search for words on the scanned PDF document

  A scanned document is just an image; even if it contains text, it is not searchable.

  Put text in a scanned image available, you will need to perform the recognition of text (OCR), which can be made with Acrobat, but not the free player.