Tracing of tablespace increase and user causing increase

Similar Questions

• How to limit the privilege of tablespace to a user?

  Hi, I simply login as sys and create a user with the default 'users' in the table of his user space, then I'll give him the 'create table' and "unlimited tablespace" privileges, then I switch to this user and conclude that it can create the table in the tablespace 'users', but also others like "sysaux", how do I grant to revoke his privilege If I want to him to use only the privilege of 'users', it seems that I can't write that kind of command: 'grant unlimited tablespace on xxx users?
  Thanks in advance.

  Alter user xxx quota 1m on users;
  

  Concerning

• Unlimited on USERS quota of USERS of the tablespace default ALTER USER < schema >

  Hi all
  
  I got a schema called dmuser1 which I had assigned to tablespace "odmperm."
  now, I was running short on space in the drive on which oracle is installed and
  There was a 'odmperm' tablespace data file,
  so I thought to drop the tablespace "odmperm" and the corresponding data file,
  so I modified the schema dmuser1 to point to the USERS tablespace in the race code below
  
  ALTER USER dmuser1 quota default tablespace USERS unlimited USERS.
  
  so I ran
  Select * from dba_users;
  
  Here user dmuser1 had changed users tablespace, so I used the command to remove the file from the data below
  
  DROP TABLESPACE INCLUDING CONTENTS ODMPERM;
  
  now, when I log in the dmuser1 schema, none of my paintings are present and I don't have the backup too, so please help me solve this.
  
  
  Please, I beg you.
  
  Thanks in advance.

  You are out of luck - the paintings disappeared and without backup or export, you will get their return. If you still have the data file on the file system, contact the Oracle Support and ask DUL - that is if you have a support contract. No other chance, I'm afraid. Your command alter user only had an effect for future tables :-(

• Tablespace LMT and DMT

  Hi all
  
  Can you please explain to me what happens when deleting implemented as a block of data in the tables, which in the tablespace LMT and DMT? How the blocks are used and how information on the blocks are maintained?
  
  Thanks in advance,
  GOUZERH

  Well, this is an ancient question.
  Dictionary Tablespace managed, as the name suggests mangages the info on the used/free blocks of the data in the data dictionary file. The two tables that are used are the UET and FET$. In other words, each time you make any space related operations on the tablespace, Oracle has to do some additional tasks such as
  (1) it should work recurvive calls in these tables to obtain information on available space. So, if the space comes to agree with your space operation, such as creating table, Oracle will let you move forward. It's probably quite slow.
  (2) your updations or any associated space operations will lead to the changes (DML), on these data dictionaries as well. This will cause additional Redo/Undo should be generated. However, the magnitude of it wil not be much, but still, its going to be there and if the activity is too much, it can add up to much.
  (3) with any space operations, there will be a free space coming up. Most importantly, this space will be no contiegious. This will lead to fragmentation in the data file.

  Because of these problems, Oracle gave the idea of the LMT. This leads to a total change in the algorithm. LMT, as its name suggests, is synonymous with Managed Tablespace locally. This means that space related info of the data file is maintained with the data file header itself, in blocks of bitmap image. These blocks are capable enough to hold the entire database within blocks very little. Then it will be very fast, and because they are just bits, they generate all again/cancel extra as well. This led to a management much better and evolving the workspace data file.

  I hope that this does not erase some things.
  HTH
  Aman...

• Calendar view-only and users are unable to change the time.

  We use Windows Server 2003 R2 active directory and group policy.

  Group Policy, we blocked sytem time change but after this timetable can also test block user cannt read calander also

  pls sugget me to resolve this issure

  Calendar view-only and users are unable to change the time.

  Hi sunil77,

  Your question about changes in UAC using Group Policy on Windows Server 2003, it will be better answered by the experts in the Group Policy Forum. Please repost your question to the address provided.

• Whenever I update "send/receive" a message asking me to write the network password and user name.

  I am connected to wifi in the hotel (Orange) and I can't SEND email, I just have to receive them.

  Whenever I update "send/receive" a message asking me to write the network password and user name. This from my mail server (not orange because that one is ok I have access to the internet).

  Most of the suppliers do not let you send if you are not connected through them, or they have special settings.  So for now, see if you can access your e-mail via webmail and use this interface and in the future, contact your ISP and ask them if there is a way to send emails when you are connected through a different network.

  Steve

• Windows XP 'Welcome screen and user accounts' missing.

  I have a Windows XP and recently installed NETGEAR for internet access.  My "Welcome screen and user accounts" are missing.  The user accounts are in the title of the user accounts Control Panel, but, "How users connect power, change" Windows and switch Fast has been disabled.  I now have the classic to log in to my account, but now I'm the only user on this computer.  Can you help me solve this problem without uninstalling NETGEAR?  I thank very you much for your time.

  2350sandy

  Your symptoms point to a Graphical Identification and Authentication (Msgina.dll) file that has been replaced by your netgear installation.  The following items describe your condition and suggest alternatives:

  "A discussion about the availability of the fast user switching feature.

  <>http://support.Microsoft.com/kb/294739 >

  "The default Windows logon Interface may not appear after installing third-party program"

  <>http://support.Microsoft.com/kb/302346 >

  HTH,
  JW

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• I installed Security Essentials and it causes Defender to stop the run.

  * Original title: Security Essentials

  I installed Security Essentials and it causes Defender to stop the run. The only way I can turn the Defender needs to restore my computer to before Security Essentials. I tried twice and got the same result.

  Security Essentials replaces the Defender?

  I am running Vista.

  Thanks Len H

  You are right.  MSE (Microsoft Security Essentials) in Windows XP, Vista and 7 can be used instead of Windows Defender.  They can not be activated at the same time.

  https://blogs.Microsoft.com/Cybertrust/2013/11/14/Windows-Defender-and-Microsoft-security-essentials-which-one-do-i-need/

• How to clean my computer of saved passwords and user names?

  How to clean my computer of saved passwords and user names?

  Original title: I'll sell my computer

  You must wipe the drive and reinstall the operating system. 
  Unless you want other snooping in your files you need more than just delete your user names and passwords from different places on the computer.

  Do not wipe the recovery partition.  The recovery partition is a small part of the disk that contains the files needed to restore the computer to factory State, see the computer user's manual or check the manufacturer support site for the from.

  Secure erase
  http://CMRR.UCSD.edu/people/Hughes/SecureErase.shtml

  Reinstalling the operating system will take care of the major PART of the problem, but to be completely safe, you may want to replace the hard drive.

• Account administrator and user, Windows 7 Premium access control problems

  We have a problem with a HP/Compaq Windows 7 Premium machine 4 months old and we cannot allow any request of the UAC.

  An account on the machine is a "Standard user" without password, but when we do something like put to day or what the icon shield it and require permission from the Admin we cannot.  The alert box will appear asking you to Admin password (with no box to type, besides whom there is no account active Admin but maybe only the Super Admin account 'hidden' which is off), but also the 'Yes' button is gray and only 'no' can be clicked.

  Support PC World were unnecessary, saying full install, their stock response.  Tried enabling the 'super administrator' hidden account think it worked once before when I need administrator rights to install the software, but as unable to run CMD prompt as administrator (again because UAC comes into play), I can't seem to do.

  So now stuck with the new machine and messing around on the fighting with the OS: s I thought rightly or wrongly that the activation of the hidden Admin account would do, I'm sure that's what I did before, but I keep hitting the problem guest UAC as described above.  Therefore, the following does not work:

  ______________________________________

  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: yes

  Log off, and then log on to the administrator account
  Make the appropriate changes to your accounts

  Log on to your account
  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: No.

  ______________________________________

  I tried to click with the right button on CMD prompt and checking run them as administrator on the drop down menu, but UAC prompt comes up, no luck.  Also tried setting to "Run as Administrator" when raising the properties by right-clicking... same result.

  Also tried cursing at the machine... same result: o

  Any help appreciated because I'm sure that I've done it before, and there is a way to pass the CMD prompt.

  Ah finally solved.

  HP Compaq machines have their own start to use for recovery etc. software (accessible by pressing the ESC key), so I went into the system recovery using the backup utility to make sure that the external hard drive was last week 'missing' files, and then cancelled rather than clicking on the side to supplement a system recovery.

  This gave me the traditional options of safe mode,... networks, prompt etc.  Choose Mode safe mode with command prompt and Super Administrator hidden account was visible as well as the Standard user.  Choose the account super administrator, connected, activated the password protect and define it.

  At the command prompt enter:

  NET user administrator / Active: Yes

  Restarted as Standard and UAC user now works fine.

  It all started because of a need to install Open Office and then down the line a cutting machine, interrupting a Microsoft Backup, which could not be restarted without password Admin and user access control issues as described above.

  Is not to hide the Admin user at all now!

• I have the ie3sh.exe problem on my laptop, can you tell me what I have to do and this causes a problem with LAN for internet

  I have the ie3sh.exe problem on my laptop, can you tell me what I need to do, and this causes a problem with LAN to the internet.  What happens on another laptop not this one.

  Hello

  ·        Which is exactly the problem that you face with iesh3.exe?

  ·        When you receive the error message that is related to iesh3.exe?

  ·        You did changes to the computer before the show?

  ·        This issue you are facing with internet?

  ·        What is the full error message that you receive?

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:  I would say as you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Post back with the required information so that we can help you further.

• Configuration of the DMZ and USER-BASE10

  Hello

  I've been using System DMZ1 variables... 3 and USER-ADDRS1... 5 to identify the different networks. However, I was wondering, what is the difference between the DMZ and USER-BASE10? It is in the name, or they are used in different ways by some aspects of the software?

  Kind regards

  Matt

  There is no difference. They are purely just names. The sensorApp just treats them as variables that can be used to specify filters.

• How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  Hello

  I want to give as open & export to the level of permissions.

  How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  For example, if the group permissions, inturn should reflect on the users.

  Please help me.

  Thanks in advance,

  A.Kavya.

  Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD

  And I think that you mix you two things which are managed in different places:

  ) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box

  

  

  (b) functional privileges controlled through "Manage privileges" under "Administration".