Tracking of athletes in video

Similar Questions

• Æ any audio track of the MTS videos?

  I know it's a common question asked; I read another post on the subject, but I have not yet found my answer.

  When I try to import a video file of MTS in AE CS6, imports fine video, but the audio does not work.  There is no little audio icon for me to put in muted as there is when I import other video files and audio did not get included in the rendering.  The audio is confirmed working in VLC and MPC - HC.  One person said what happens when the camera records stereo to RL and RR (tracks 3 and 4) audio tracks, but according to VLC, they are on L and R (1 and 2) of the audio tracks in standard stereo, not 5.1.  This is the dump of the MPC - HC info:

  EDIT: I forgot to add; video MTS is a 1080 recording taken by a Sony a55v TLR camera.

  Audio

  ID: 4352 (0 X 1100)

  Menu ID: 1 (0x1)

  Format: AC - 3

  Format/Info: Audio Coding 3

  Mode extension: CM (complete main)

  Parameters of the format, "endianness": Big

  Codec ID: 129

  Duration: 5 min. 6 sec.

  Bit rate mode: Constant

  Bitrate: 256 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling: 48.0 KHz

  Color depth: 16 bit

  Compression mode: lossy

  Behind the video:-67ms

  Stream size: 9.36 million (1%)

  Another person says that this can happen when you have 3rd party codecs installed on your machine.  Yes.  I have the ffmpeg library included in the CCCP codec.  But I don't know why that would get in the way that Adobe products, and I don't know how to fix it and still keeping the codecs installed.

  Any help would be greatly appreciated!

  I'm glad you guessed it, but if you do anything for a customer paying in the future, I advised not to transcode to H.264 format.  Is a great codec and a barely adequate acquisition codec, but it is not really good for AE.

  Oh, it will do the job, but working in AE is NEVER the end of the line.  The work always takes place in the middle of a project, and you never want to degrade the image.  H.264 is pretty frozen, it will degrade images and you do not want for paying customers.

  But for yourself?  Give it a shot.

• Face tracking and recognition in video capacity

  Y at - it an application within the creative cloud that would allow me to search through video using the face detection feature?  Something similar to AMD's Content Manager seen in this article?  It would be super useful to have for my old videos.

  http://www.biometricupdate.com/201501/AMD-demonstrates-beta-software-that-organizes-videos-aide-facial-reconnaissance

  Thank you

  Jimmy

  The cloud includes two programs for video editing, Premiere Pro and After Effects... I suggest that you ask in the forums for these programs

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

• How to flatten audio multi-cam is no longer connected to a video track?

  I work in first pro cc 2015, and I'm unable to abnormal analysis result sent to protools.

  Our post her guy seems to think that multi-cam it's the question...

  No problem, I thought, Im just flatten my sequence and re-send.

  When I did ALL the video files flatten but only 3/4ths of the flattened audio files.

  From what I can tell, its only those who no longer have a video track, make a link to.

  So how to flatten audio first when there is no related video?

  When a multi clip is done there is a green track to the video and there is much for the audio. When I hear flatten it is the Act of right clicking MULITI-CAM > FLATTEN.

  If I've already cut out a sequence, some of the green audio tracks will lose their video track parent. The audio track do not have the same options of (MULITI-CAM > FLATTEN)

  I found a work around for good!

  You can LINK the audio to any arbitrary Multi-CAM clip and use this clip to flatten the two.

  It's just a work around. Adobe has really need get their * together.

• Is there a way to 'hide' a video track?

  Hello!

  I'm editing two videos at once on a timeline - we're the main video of a presenter speaking, another on a track under the main video, with a timer. Is there a way to "hide" my main video so that I can see my video of timer that is located underneath on the timeline? I do not see this option in this software.

  Thank you!
  Brooke

  Brooke1713

  In fact, when you right click on the clip, you will not see a disable option.

  In the pop-up menu that appears will be an option activate with a check mark next to it. To turn off, remove the check mark.

  RTA

• Cannot rename the video tracks in first CC?

  Most of my projects consists of 40-50 video tracks, so rename the video tracks are most important.  Whenever I try to rename a video track, it is grayed out, but can I rename audio tracks without problem.

  Any help will be appreciated, thanks!

  Nevermind, I figured it, I just had to increase the size of the track to see the name.

• QuickTime Pro - how to make a type of Brady bunch in video...

  Hi everyone - I'm doing a film type Brady Bunch for my wedding. The basic idea is that my bridal party mime along a song and its display in a mosaic of Brady Bunch effect... I am registered and just really struggled with Quicktime Pro - Ive downloaded the Pro part of it... but I can't work on how to make a grid of movie... any help would be appreciated!

  I'm doing a film type Brady Bunch for my wedding. The basic idea is that my bridal party mime along a song and its display in a mosaic of Brady Bunch effect... I am registered and just really struggled with Quicktime Pro - Ive downloaded the Pro part of it... but I can't work on how to make a grid of movie... any help would be appreciated!

  If I understand correctly what you want to do, the basic strategy is the following...

  (1) create video clips that you want to merge into a single player to create your space video editing (rather than temporal). (I.e., Audio and/or the content of each video clip is more later extracted from its source file merged together as independent data tracks in a single-file container with a maximum limit of 99 tracks.) NOTE: It is usually better to create or pre crop your videos to the format of image that you want to display in your final file. While the poster may change subsequently, chasing elongation may introduce distortion of object in the final poster.

  < image edited by host >

  Here is a collection of files that I used to create a file of example of which, according to me, you try to accomplish.

  (2) once the individual clips have been created, the next step is to extract/copy the data of your main working file. I normally recommend a workflow 'extraction' here to eliminate the possible accidental change in sourcing video clips that may or may not be needed later - especially if you can be prone to make mistakes during the learning process or need to re - edit track content later for one reason or another. In this case, the video tracks of the first 8 files posted above will be merged together as 320 x 180 'windows' in a grid 3 x 3, playing in a display area 960 x 540. The 9th (central area of window grid) will display a "title" image PNG which will be added later with a single audio track. The result will look something like this:

  < image edited by host >

  In my case, the videos are displayed is attached directly to the other and without borders. Show images title, borders, scaling and positioning of the content is all areas in which you can express your individual creativity so the image above is presented just as a small example of what can be done.

  (3) the next step is to open/create your 7 QT main window work (target player) Pro. To make this simple select the 'New player' option under the menu 'File' of QT 7 Player.

  (4) at this point you repeatedly open your video clips source one by one, extract data from a track audio and/or video you like, store their pointers in the temporary memory, select the target drive and then copy references to date of temporary storage track in the new player. Most of these operations, you want to open and use the 7 QT Pro fenΩtre 'PropriΘtΘs' ('Command-J' keyboard shortcut).

  

  The base this workflow is to open/select the video file source, open the 'Properties' window, select the data track, you need to extract/copy, press the button "Extract" to extract the data from a separate playback window (to avoid accidental loss or modification of the original file), select the player window newly extracted, press the "Command-A" keyboard shortcut to select the entire track (or change the track if necessary before using the shortcut) , press the keyboard shortcut "Control + C" to copy the reference to the memory track, select the target drive window, open the 'properties' if it isn't already open, make sure that the playhead is an insertion point in the timeline panel and press the hotkey 'Command-Option-V' (or select 'Add' option menu change) to copy the track to your target file.

  At this point, you can close any unnecessary player windows always open and repeat the operation until all the data of video clip has been added to your target drive. Your 'Properties' window for the target player should now look like this:

  

  (5) the next step is to scale and/or get compensation for the display of individual video tracks. This can be done immediately after inserting the video tracks individual or all at the same time. I encoded my files to the resolution and the appearance I wanted to display, I didn't need to scale my files in this example. In any case, go to the widow of 'Properties' of the working file and select the video track, you want to work. Once the track is selected, open the tab "Visual settings" piece of tat in the half lower the window "Properties". Enter values waterproofing if necessary, but try not to change the proportions of the display. Then adjust the values of offset for each track so that the individual display areas do not overlap each other. In my case, it was implemented first video track to an offset "0 x 0. Because my songs were to be displayed in the boxes to display 320 x 180, additional video tracks were offset 320 x 0, 640 x 0, 0 x 180, 640 x 180, 0 x 360, 320 x 360 and 640 x 360 with the offset of Center (320 x 180) reserved for future use by my 'title' PNG image. Video tracks are normally assigned to layers automatically when added to the target file. These layer assignments may be changed if necessary for duplication, but since none of my pieces overlap, I have all my video tracks placed on layer '0 '. (However, this was not something you need to worry at the moment.)

  (6) using the same basic strategy, I opened my PNG image in a window of player QT 7 and used the keyboard shortcut "Command-A" and "control + C" to copy the image into the temporary memory. However, since I want this image image displayed during the entire period of the reading of the final file, I use a different strategy to copy it in to target player. In this case, I select the target player and the keyboard 'Command-A' to select the length of the file. At this point, I can use the menu 'Edition' the option "Add to selection and Scale" (shortcut of keyboard 'Option-shift-command-V') to display the image copied for the duration of the file.

  (7) the last data track, which I have added to my sample file was the audio track. Here once again the strategy of the video track is used to extract everything first and then copy/add data to the target file. This concludes the copy of data workflow and I recommend that you use the "save under...". "Option from the file menu to save your project as a MOV file standalone.

  (8) at this point, you can cut your file if necessary. In my case, all video tracks (as well as the audio track) was of different lengths. In my case, I started reading all the content at the beginning of my file, but you can offset the departure of any track anywhere in your timeline if you want. (Another chance for you to express your individual creativity that can be desired). However, since each of my video track ends at a different point during playback, I found it interesting to cut my file at the point where the audio track ends and before the last video track ends playback. Basically, you can use the 'I' and keyboard shortcuts "O" to define 'in' and 'out' points for your target video if you want. Once these are defined, you can use the Edit option "Trim to selection" menu to physically cut your project file.

  (9) when the project is complete, you can export it to a format of final distribution. In my case, I used the El Capitan Finder 'Convert' possibility of embedding to transcode the project file M4V h.264/AAC high quality to "flatten" all the contents of simple video and audio tracks. The target format was probably "overkill" for my purposes, but provides a good example of what you can do according to the time and effort that you can invest.

  (10) this is the URL to the 'project' and the final output files "" in case you want to review. (Option-click on the link to download copies.)

  

  < published by host >

• Help integration of still images and video, please

  Greetings. In Movie Maker, insert a still or video while maintaining the continuity of the original audio track "money"? Thank you very much.

  Greetings. In Movie Maker, insert a still or video while maintaining the continuity of the original audio track "money"? Thank you very much.

  =========================================
  The task that you describe is easy to do in the previous Vista Movie Maker
  version 6 because it has a scenario with multiple tracks... Video,
  Transition, Audio, music and title overlay.

  If you download and install Vista Movie Maker 6, tutorial
  pasted below (composed originally for XP Movie Maker) should
  help you get started

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Vista Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  ======================================
  Always insert shots in a video Clip and maintain Audio continuity
  ======================================
  For the timeline, drag a second copy of the video to Audio / Music
  follow and drag it left or right to align on the Audio track. Now, that
  instance of the video file will be recognized as an Audio file.

  Then right-click / mute the Audio track.

  Now, you can split the video anywhere you want... CTRL + L... .and remove
  a section... then insert a Photo and give it the same length as the
  segment you removed.

  Here's another method:

  Split your video clip on each side of the area where will be the stills.

  Now... drag the part cut on the audio / music. BTW... If you want to
  to add a second 5 again... Remove 5 seconds of the video clip. (info below
  splitting if you need it)

  Drag your fixed shots to the timeline and drop it off at the place where
  you have deleted the video.

  The Audio clip on the audio / music can be dragged to the right or left to
  adjust its position.

  More information about the Division...

  "Split a Clip in MM2.1.

  Drag the audio clip on the timeline.

  Play the video/audio by clicking on the 'Play' button under the display screen.

  You will see the playback indicator (vertical line), advancing through the
  timeline.

  Click on the "Pause" button at the location where you want to cut and type...
  CTRL + L or click the "Split" button at the bottom of the display screen.
  (you can also make adjustments by dragging the playback indicator)

  Make splits as much as you want and remove unwanted in law clips
  Click on / delete.

• help with source audio tracks in the timeline.

  Why do I get the 8 audio tracks when I insert a clip of my source window on my calendar, when I preset my calendar for only 4 audio tracks

  If your video clips have 8 audio tracks the chronology will add the additional track to make all clean. If your right click an item in the project pane and select Modify/channel audio, you can change the audio configuration.

  

• How can I draw a line around the edge of a piece of property that I shot a video clip of 13 elements?

  How can I draw a line around the edge of a piece of real estate in a video clip with 13 elements?

  KING OF THE SKY

  First 13 items on what operating system? Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project?

  Your question immediately... you could try something like this

  In this scenario, you start with your video on video 1 track with the Timeline indicator placed in the appropriate location of content timeline.

  The Titler line file created will be automatically placed at the position of the indicator in the timeline.

  Text Menu/New/default of titration / and select the Section forms.

  The Titler file goes to Video Track 2 above the video on the video 1 track.

  Select the line tool in the section shapes and draw your line on screen correspond to the where you want it to appear in the video below.

  Your image of the line is the line on transparent background where the content below shows through the transparent areas in this image of the line.

  Please consider. If any questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• The audio track to video1 moved to audio2, why, and I can restore to audio1?

  The audio track to video1 moved to audio2, why, and I can restore to audio1?

  John

  Now, I know what you did and what happened.

  The key was when you wrote

  . I think that's all happened after I had added another audio track

  When you right-click close a numbered audio track name and select Add titles in the context menu, you make your selection

  a. Add the number of video and/or audio tracks

  b. development: before first track or after last range

  Here are the scenarios given when there are 3 audio tracks by default 3 video. If you have video related to audio in 1 Audio video 1

  To get your result

  You must have used

  Add track

  Video add 1 before the first track

  Audio add 1 before the first track

  

  To overcome this situation where the content of the video 1 is linked to 2 Audio content when you decide to add an audio track to the timeline

  1. right click on the items in this undesirable state, select Delete Audio and video of the pop-up menu links, pass the audio not coupled 2 Audio to Audio 1. Align the video and audio as they were originally...

  2. Select video 1 and Audio 1 at the same time, right-click anywhere in the selection and select the Audio and video connection from the drop-down.

  If you had selected instead

  Add track

  Video add 0 before first track

  Audio add 1 before the first track

  you would have gotten

  

  Note the arrangement that created this way.

  What are the details of what you asked to do? Explore and experiment with the video, add titles or audio track number and investment options.

  Please consider.

  Thank you.

  RTA

• Video clip locked to start of timeline - how to get around?

  Expertise: beginner.

  I have the Tracking Setup

  Group 3 - text video

  Group 2 - static images video

  Group 1 - video clips video

  Audio track

  The first video clip is "broken" at 00:00. If I try to move it just it snaps back to 00:00. Other clips can be moved but if I drag to the right it moves above the following.

  Q1: in general, how to open a gap between two elements (for example, to insert a title)?

  Q2: in particular, how can I move the first clip (and all subsequent clips) to the right?

  Thank you very much.

  You should be able to select the first item, hold down SHIFT, and then select the end element. Now click and drag.

• Problem with 3D camera tracker

  Hello

  I want to do a 3d text in my videos with the help of the 3d camera tracker. It didn't work for each vids, but I can use it for some, that's what I don't understand, because I recorded videos with the same software. After thoroughly analyzing and soilving camera it says: "analysis resolve failed", but as I said, for some videos, it works. After he did not work for me, I checked some videos on youtube, like this: Motion Tracking Tutorial | Adobe After Effects | CoD4, CS + - YouTube I want to do with the 3D camera tracker begins in this video from about 0:35 CS Ninjas in Pyjamas - who we are (official music video) - YouTube

  Hope you can help me.

  
  

  It will not work. You have pictures of ghosts in there due to the variable framerates in your bullet-time / slow-mo and it completely havok with the logic of temporal coherence. It might be possible if you captured the shot at regular, fixed framerates and then it slowed down in AE, but even in this case, you will need to do the most compatible motion as not to approach objects until they appear full screen.

  Mylenium

• Point of the track is super slow when parsing

  Hi I have a little problem with the Track Motion function. Whenever I press the button 'Look forward', it starts monitoring, the eye in this case, but very very very slowly. I look at the various tutorials on youtube and all follow them pretty quickly. I am tracking 7 seconds of video, but it takes about an hour or two.

  Video: mp4. h.264 (Iphone 6 clip) of 1920 * 1080. However, I tried to restore to .avi or .wmw, but still too slow.

  My PC: Win 7 x 64, Intel i7 4970 K, 16 GB of RAM DDR3, Gtx 970

  Why is it so slow?

  Depends on your system and how you set up the tracker. A screenshot of your configuration of monitoring would be useful. A lot of noise, movements of camera, followed by the major areas, research areas, slow down all the follow-up.

• Timeline shows no name of audio tracks

  I just switched from Premiere Elements Pro and having some problems...

  One of the greatest: in the Timeleline Pro does all the names on audio tracks!

  Which means in the video track I see something like '[V]example.mp4' and in the corresponding audio track, I see just the icon of "fx".

  I've expanded the view zoom and titles and all, unlocked audio-video-nesting - however there is no name in the audio tracks to be seen!

  For this reason, I get confusued which the audio track belong to which video, so it's really important for me to get this name in the timeline panel.

  Thanks in advance!

  Unfortunately, it is the default view of Adobe.  Fortunately, it can be easily corrected.  Click on the key icon next to the sequence of timecode.