Transcript of speech recognition tutorial

Similar Questions

• speech recognition tutorial

  I have a Pavilion HPE-210Y running Windows 7.  I got this machine since June 2010.  I just found out that hp has included an application of speech recognition with this computer.  I installed it without any difficulty.  The app offers a tutorial.  I loaded the tutorial and found it very useful.  I stopped at halfway through the intention to come back after lunch.  When I returned to the computer I could not find the tutorial.  I spent hours trying to find it.  I'll definitely be grateful to the person who can tell me how to get there again.

  The Help menu in the application of speech recognition has a link to the tutorial.  I don't know why I didn't see that earlier.

• the speech recognition tutorial requires that the computer must have a 1024 x 768 or higher screen resolution

  I have a new netbook from Acer 532 h. I often use the Microsoft speech recognition on my computers.  I have a problem with my new netbook when you use the windows Tutorial 7. It requires 1024 x 768 or higher screen resolution.  The resolution on my netbook is only 1024 x 600. What should I do? Wouldn't be better to use XP Professional?

  Hello
   
  Try to run this file tutorial in 640 * 480 screen resolution.
  To do this:
  1. right click on the file, select Properties
  2. click on the Compatibility tab
  3. under the tab compatibility, under settings, select run in the resolution 640 * 480 screen"checkbox.
  4. click on apply OK.
   
  Thank you, and in what concerns:
  Swati K - Microsoft support technician

• Audio recording in voice command (no transcript of speech recognition)

  Does anyone know a program/application record that allows a person control the audio audio functions during an audio recording with voice commands? I would like to dictate (no transcript required) to a .wav file or .dss with an earpiece bluetooth and power say 'start', 'stop', 'rewind', etc. when recording while I'm totally hands-free during the autospies I do.

  Hello

  I would say that you can use your favorite search engine to download and install a voice controlled application audio recording, you need to use.

  NOTE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Speech recognition will not start and continue to run

  I am running vista 32-bit Home Premium edition. I finished the speech recognition session setting the microphone. I finished the tutorial.  However, no voice recognition program continues to run. When I run the program of recognition (or when it is started automatically to the 'start-up', it starts to run and then goes into "Sleep" mode for a few seconds and then on 'Off'.  The second time, I start speech recognition he will say 'Start speech recognition' and then go directly to 'Off '.  When I click on the microphone icon in an effort to implement the program "On", I get an error of speech recognition that says "Please restart speech recognition. It is said in the body of the error message "speech recognition has encountered an error. Please restart speech recognition to ensure that you can continue to use the speech recognition".   When I restart speech recognition error repeats.

  Although the speech recognition tutorial seemed to work, the real speech recognition program doesn't have.

  Does anyone know a fix for this problem? Thank you.

  Hello Dirleton,

  Thank you for your message.  For testing purposes, could you try creating a new account on your computer?  The process is described below:
  * make sure that you logged in with an administrator account *.
  1. click on the 'Start' button > right click on 'Computer' > select 'manage '.
  2. click on the arrow pointing down next to "local users and groups.
  3. highlight "users."
  4. in the right pane, right click and select 'New user' (enter information, then select OK)
  5. now right click on the new user and select "Properties".
  6. Select the "Member" tab and click on 'Add '.
  7. in the box type 'Administrators' and click on "check name".
  8. click on OK
  Then log off your computer and connect again the new account.  Test the speech recognition, this will rule out a problem of profile corruption.  We can then troubleshoot further.
  Please let us know if this or don't help solve the problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Move the slider to its current location with the Windows Vista speech recognition?

  How is a moves the cursor from its current location with the Windows Vista speech recognition?

  What is happening with this example?  -What are you talking about?

  "You must get the cursor in front of the word 'harder' by saying 'Move to harder' and then say 'open quote', then move it to the end of the strongest with 'move after harder' and then 'close quote.' »

  Vista speech recognition
  http://www.ExtremeTech.com/Article2/0, 2845,2109977,00.asp

  Is there something to this?

  "You can move the cursor anywhere on the screen and tell your mouse to"Click". This, together with the mousegrid. Say:

  MOUSEGRID. "

  Transcript of speech recognition demo Windows
  http://www.Microsoft.com/enable/demos/windowsvista/trans_speech.aspx

• Speech recognition error Windows 7

  Hello world. I have a windows 7 64-bit. My speech recognition does not work. Whenever I click it, it says:

  "Speech recognition could not able to start because the language configuration is not supported."

  The recognizer language must match the language of the user interface. Please change the recognizer language in the control panel of the speech recognition under Advanced Options»

  Here are some of the few things that I had already done, BUT my speech recognition still does not work:

  • First thing I tried to do was to check to see if my region was correct and that my language has been updated with English
  • I had already gone to Regedit and put ctfmon.exe in the correct folders. (When this does not work, I then installed the actual ctfmon.exe, run the file and then merged it)
  • I have restarted and shut down my computer several times for updated software (I also made sure my windows 7 has been updated)
  • I have trained default speech profile several times and has also made a new speech recognition profile in advanced speech options and then also formed the new profile a few times.
  • I had unchecked the box that says, "Examine the documents and mail to improve accuracy" and he then applied on
  • I had set up my microphone already and it works perfectly. (I also went through the speech recognition tutorial)
  • I checked if my speech has been disabled (but it wasn't)

  Everything I tried seemed to not work which is strange, because so many people have so much success to all the steps I did above. I hope someone might have a solution for me.

  Hello
   
  I understand that it's frustrating when things don't work as expected. I appreciate your interest and your efforts to solve this problem. Don't worry, I will help you on that.
   
  Try the steps suggested by Marilyn O replied on 29 June 2010 article of Microsoft Community mentioned below.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-7-speech-recognition-will-not-start/7e8c7436-d92e-47a7-AB25-b5e8d8cbf656
   
  Hope this information helps. If not, please write to us, so that we can help you further.

• Speech recognition profiles while running a program with administrator privileges.

  My question is: what voice profile would be a program that is required to run as Administrator allows to refer to my voice.

  Basically, I'm running as a normal user with no administrative privileges. I use a program called VoiceAttack that "must", "Run as Administrator". So whenever I run VoiceAttack, I need to enter the administrator password to start the program. I ask because I noticed I had to re-enter my registration for VoiceAttack when I went to run as usual "Run as Administrator". Would this mean that he will then use the recognition to the speech of the Admin profile, or to use the current user profile. If I run VoiceAttack and a word like MSWord editor and try to dictate, they are / can be radically different to represent what I'm saying. I want to train the right profile for the accuracy of the recognition the most.

  Yes, use more, I mean use it for daily activities. Write emails, opening programs, etc. Also, just play with it! If you need to fix something, say "correct that" If you just said, or ' correct * word * "if it is somewhere else in the document. He will learn from this mistake in fact and is unlikely to do it again. For more information (and help the computer you understand as well), making the speech recognition tutorial. I really find it very useful. It works in the background while you talk could cause problems like unwanted things being typed and programs opening/closing randomly.

• How to install speech recognition on Windows 7?

  Original title: installation recanation of voice

  need help with the installation of yhe language

  You can use your voice to control your computer. You can say commands that the computer responds to, and you can dictate text to your computer. For more information on what you can do with Windows speech recognition, see what can I do with speech recognition?

  Before you start using speech recognition, you must set up your computer for Windows speech recognition. There are three steps to set up speech recognition: set up your microphone, learn how to talk to your computer, and train your computer to understand your speech.

  Before you begin, make sure that your microphone is connected to your computer.

  Configure your microphone

  1. Click Start, type: speech recognition., then press on enter

  2. Click Configure microphone.

  3. Follow the instructions on the screen.

     Note

     • The success of speech recognition is directly related to the quality of the microphone you use. The two most common types of microphones for speech recognition are headset microphones and desktop microphones. Headset microphones are better suited to work with speech recognition because they are less likely to pick up outside sounds.

  Learn how to talk to your computer

  1. Windows comes with a speech training tutorial to teach you the commands used with speech recognition. The tutorial takes about 30 minutes to complete. Follow the steps below to run the voice training tutorial:

  2. Click Start, type: speech recognition., then press on enter

  3. Click on take speech tutorial.

  4. Follow the instructions in the speech recognition tutorial.

  Train your computer to recognize your speech

  1. Speech recognition uses a profile unique voice to recognize your voice and spoken commands. As you use speech recognition, your voice profile becomes more detailed, which should improve the ability of your computer to understand you.

  2. Click Start, type: speech recognition., then press on enter

  3. Click Train your computer to better understand you.

  4. Follow the instructions on the screen.

  Note

  • Speech recognition is available in English, French, Spanish, German, Japanese, simplified Chinese and traditional Chinese.

• How can I get speech recognition to work with text to train my voice, the way which the tutorial done?

  The tutorial of speech recognition to train my voice is not large enough for the engine get good recognition of my voice. I want to put in place a couple random pages of text (like a novel, etc.), and that I dictate the words in the program he would coordinate the words I read with the text I was reading from and type what I read to show how he got trained.

  Here is the translation of the above using the voice recognition program.

  If this tutorial from speech recognition to train my voice is not a large enough for the motor get a good and recognition of my voice.  I want to put in place a couple random pages of text (like a novel) which does not run and I dictate the words in the program that he would coordinate the words I read the text I was reading types of what I read, that the show has done which forms

  The foregoing would take a lot of editing, which I already did a large part of. Also if you change the type of microphone that you are using, you could start any training.

  I'd be cool if (with headphones), you might get feedback that the program thought you said so that you wouldn't be constantly replay to see if it came out correctly.

  Hello

  What version of the windows operating system is installed in the computer?

  Method 1:

  I suggest you to see the link (it is necessary for windows 7)

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-NZ/Windows-Vista/troubleshoot-speech-recognition-problems

  Method 2:

  If you are using windows 7, I also suggest you to see the links and check.

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-speech-recognition

  Common commands in speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/common-commands-in-speech-recognition

  Add or edit words in the speech dictionary

  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-words-in-the-speech-dictionary

  Dictate text using speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/dictate-text-using-speech-recognition

  See also:

  Setting speech options

  http://Windows.Microsoft.com/en-us/Windows7/setting-speech-options

  Set up speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/set-up-speech-recognition

• compose an email with speech recognition

  I was able to compose of 3 emails using speech recognition earlier today.  Now, I can't do squat!  He does not do anything!  He just telling me * what was that * no matter how many times I tried and I tried a lot of THINGS!  I even took the tutorial 3 times and still nothing!  (tutorial shows nothing about its use in e-mails)  Someone know a tutorial to compose an email with the word, or have any advice?

  So sorry!  Gmail.  I also tried it in my Yahoo email as well, but he stopped working there, too.

  Just dictated several E-mail in Gmail. Trick is that having WSR (Windows speech recognition) began before from Gmail.

  Markoe Marty

• How to make the text of speech recognition of a video or dvd

  I have an instructor who is very difficult to understand on dvd or mp4. I have a broken ear drum and have all kinds of internal sounds... so I want to have speech recognition type a transcript of his mp4 to share with my class. How can I do this?

  Hello

  I have fear of speech text is dictated in direct speech. Take a look at this article

  http://Windows.Microsoft.com/en-us/Windows7/dictate-text-using-speech-recognition

  However, you can use your favorite browser to search for a possible third-party software convert MP4 to text.

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• speech recognition - "this command is not available now"...

  I have windows 7 with office 2010 and when I try to say commands, such as select Word or correct the word or ordering another new paragraph I receive a message of this command is not available now... when it will be available? also, when dictating a sentence, if I stop it capitalizes the next word in mid-sentence... How can I fix that? and don't forget that I can't use the exact word or select Word... it took me twice as long to make this letter with speech recognition, of the type just... I read on these forums, I googled to death and please please please do not direct me to another forum... I set up my micro I did the tutorial and additional training, I looked over the options and others and I can not understand how to fix... the exact same question was asked and the person who answered just said set up the microphone, the tutorial and the additional training and as many links to forums... I clicked and traveled all the links and the answer may seem not available as to why my speech recognition accepts not my orders... Please answer and if you don't know, don't send me on a forum's wild-goose chase...

  The solution to your problem is to click the speech recognition microphone, first before you open Word.  Once the speech recognition is started, right-click it, click options, select Notepad of dictation and then open Word.  If you do it in this order, everything should work correctly in Word.  Notepad will not come to the top.  The command everything will work directly in Word itself.  If you open Word first before the speech recognition and do not have Notepad - "command not available" will come.  I hope this helps.

• Make a shortcut for speech recognition

  Good well I tried to create on but fail, I tried searching the internet, failed to learn, I searched these forums... And has failed, so now I want to know, there is NO icon speech anywhere, but in the control panel (the "speech recognition Start") and I don't like the 'start-up windows startup' and I do not like, navigate I would just click 2 times on the element on my desk (although I might navigate to the icon ;)) just a simple tutorial would be nice) : D

  To create a shortcut on the desktop, open the control panel and drag the icon for the desktop speech recognition Options while holding down the left button of the mouse.

• "' Error of speech recognition: voice recognition couldn't start because the language configuration is not supported.

  OP: Windows speech recognition

  Hi, I have a Dell Inspiron 1545 with Windows 7. I just put in place the Windows speech recognition and finished the installation and the tutorial. I went to use and it says:

  Speech recognition error

  Speech recognition could not start because the configuration of the language is not supported.

  The recognizer language must match the language of the user interface. Please change the recognizer language in the speech recognition under Advanced options control panel.

  I don't know what that means, I tried changing the settings under:

  Control Panel > accessibility > speech recognition > speech Advanced Options

  But nothing seems to work.

  Help!

  Hello

  Saw this in another forum and it WORKS!

  Hello

  I had the same problem. Strangely, I had other symptoms. I use the Turkish keyboard Q primary and English as secondary United States. As my speech recognition broke down, I saw that my office word and outlook mulfunctioned in what concerns the language of the keyboard. I was able to use the Turkish Q keyboard on any application, but when I open outlook or word, changes in the English language.

  It happened on xp for... so I turned on the language bar to assign the TR when I am using these applications. But the language bar never himself displayed on the bar of tasks or office. So I get this problem and I saw that you can solve this problem via regedit.

  go to computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  right click on the right and a new "string value" component name value can be by default, the value data must be set to "ctfmon" = "" CTFMON. "." EXE ".

  After that I restarted my machine and the language bar came to the taskbar. I went into applications and changing the language to TR. And there was a surprise for me. Speech recognition long gone was back at the top of the screen. (I tried everything that proposed that nothing worked)

  I'm not sure but maybe the difference in language between applications caused my problem. Or maybe ctfmon has caused. Try this one.

  I hope that this is the case for you and you can fix it too...