compose an email with speech recognition

Similar Questions

• Getting started with speech recognition problems

  I tried to use speech recognition on windows 7 but it does not recognize the new device (headset) and tells me that the language of the English of the United States, recognition does not match the language of the user interface.  Could be a missing driver and how do I get it installed.  I never had problems with windows to recognize a new device until I tried to use speech recognition.  I don't understand why I'm having a problem with the language; It will allow speech recognition to open so that I can use it.  Both are these problems related to a missing driver or could there be another reason?

  I tried to use speech recognition on windows 7 but it does not recognize the new device (headset) and tells me that the language of the English of the United States, recognition does not match the language of the user interface.

  To see what recognizer is to be used, speech recognition, open in the Panel. Click Advanced in the upper left corner of the word. Make sure that the language drop-down list Microsoft speech recognition for English system.

  To set up your microphone:

  • Right click on the speaker icon in the taskbar to bottom left. It looks like this:
    
  • In the menu when you right click the speaker, select recording devices.
  • Make sure that the microphone you use (USB, with analog connectors or built into the computer) is set as the default value.
  • Speak into the microphone. The counter to the right of your microphone volume must move up and down like you're talking about. If it is not the case, click on properties, then on levels and level to about 75% of the value.

  To learn more about WSR, do a search engine search for:

  Marty

• Problem with speech recognition in Windows 7 and MS Word 2010 - strange window opens

  I have been using speech recognition in Windows 7 to dictate in Word 2010.  Yesterday it worked fine: I did a number of training records, added a few new words in the speech dictionary and dictated a part of a document.  No major problems.

  Today, however, when I begin to dictate, rather than insert the words directly in my Word document, a secondary window will appear next to the insertion point and text appears here, with small buttons that say "insert" and "Cancel".  It's rather annoying - get the text dictated in the document, I must stop dictating and say "insert."  Is it possible to prevent that from happening?  As far as I know, I don't have any changes to the settings or program options to cause this.  Help!

  Thanks for the answer, but now I can't seem to reproduce the problem.  I don't know why what started, but it doesn't seem to be the case more.  Thank you.

• With "Speech recognition" software problems Windows 7

  Can you please help regarding the following problem, I am faced with the "Speech recognition" software

  When I spell "t", it happens that some other characters such as "p", "d" etc...

  I also tried, don't like the Tiger, t as in the table etc, but still no luck

  Note:

  (1) this problem does not occur when the demo given by windows 7

  (2) were also widely used the tutorial in speech recognition for the training computer, but, still, I am facing the problem with some of the characters

  Can you please suggest, how to solve this problem.

  Kind regards

  Krishna

  Six position number the you wore thanks Marty, all.

  When I use the Radio Alphabet to spell speech from Windows, it recognizes my S or Sierra, or P, or Daddy and T or Tango (arg!).  The suggestions are A like Apple, etc.  Is there a different alphabet (Word/radio) that uses Windows Speech?

  Also, it comes out, if I made a mistake on the job 6 letter and try to return to the position of the letter 6 all the 'bells' is unleashed.  If I am lucking he (WS) knows that it does not recognize "six".  More often, he gets into a bunch of jibberish that makes fate and speech Windows more work than using, it offers when it works.  How does a return to spellit position 6?

  Kevin King

  user, user Windows Speech Version 6.1 (Build 7600) on MS Windows 7 Enterprise 64

  If you are in the No. 8 position and he wants to go back to 6, not simply say: "six". This takes back you to the position of number 6.

  WSR developers are smart enough to make sure even if you do not know the universal military alphabet, you can use any word starting with a letter that you want to appear.

• Are there ecercises or lessons that will help me to become familiar with speech recognition commands?

  I'm trying to use Wordpad, but I; m having trouble remembering all commands.

  I'm trying to use Wordpad, but I; m having trouble remembering all commands.

  For Wordpad, you have several options. First of all, you can say: "numbers." This will allow you to pick up any menu or a button on the screen. For example for another way of doing things, I just wrote in Worrdpad, "this is a test message." Then, I said, 'Select message.' He reiterated the message Word. Then I said Format in the menu Format open. Then said policies and then "BOLD" and he has given several choices and I have selectionne.1 and then he said OK. The word message was now "BOLD".

• How can I get speech recognition to work with text to train my voice, the way which the tutorial done?

  The tutorial of speech recognition to train my voice is not large enough for the engine get good recognition of my voice. I want to put in place a couple random pages of text (like a novel, etc.), and that I dictate the words in the program he would coordinate the words I read with the text I was reading from and type what I read to show how he got trained.

  Here is the translation of the above using the voice recognition program.

  If this tutorial from speech recognition to train my voice is not a large enough for the motor get a good and recognition of my voice.  I want to put in place a couple random pages of text (like a novel) which does not run and I dictate the words in the program that he would coordinate the words I read the text I was reading types of what I read, that the show has done which forms

  The foregoing would take a lot of editing, which I already did a large part of. Also if you change the type of microphone that you are using, you could start any training.

  I'd be cool if (with headphones), you might get feedback that the program thought you said so that you wouldn't be constantly replay to see if it came out correctly.

  Hello

  What version of the windows operating system is installed in the computer?

  Method 1:

  I suggest you to see the link (it is necessary for windows 7)

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-NZ/Windows-Vista/troubleshoot-speech-recognition-problems

  Method 2:

  If you are using windows 7, I also suggest you to see the links and check.

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-speech-recognition

  Common commands in speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/common-commands-in-speech-recognition

  Add or edit words in the speech dictionary

  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-words-in-the-speech-dictionary

  Dictate text using speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/dictate-text-using-speech-recognition

  See also:

  Setting speech options

  http://Windows.Microsoft.com/en-us/Windows7/setting-speech-options

  Set up speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/set-up-speech-recognition

• Windows speech recognition with webcam microphone

  Hi I have a question to be able to use speech recognition in windows that I have to buy a microphone or can I use the microphone on my webcam (logitech hd webcam c615)?

  Hello

  You can use the built-in mic on webcam with speech recognition Windows on Windows 7. It is not necessary to connect an external microphone to use the Windows speech recognition.

  For more information, see the articles:

  Set up speech recognition

  Set up your microphone for speech recognition

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• How to configure the Windows speech recognition and use gtalk and gmail?

  Original title: Windows Vista speech recognition program the

  Trying to learn how to use the program of recognition of the window so that I can help a friend who has very high served as his hands. I'm getting the hang of it, but I need to know how to use Windows RV with gmail, because that's where we have been typing his e-mails for him, and is where he'd like to read his mail. On my own page of gmail, I am able to use the "numbers" for everything except actually typing in the main field, where he would actually type emails. Anyone able to help?  Max of TIA

  Hello
  • What happens when you click on the text box and dictate?
  • Also, try to use the HTML version of gmail and check.
   
  1. in Windows vista speech recognition.
  I've collected some articles from the Microsoft Knowledge Base that will help you in until the speech recognition settings.
  Windows speech recognition
  http://www.Microsoft.com/enable/products/windowsvista/speech.aspx
  Set up speech recognition
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognition
  Setting speech options
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-speech-options
  What can I do with speech recognition?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-do-with-speech-recognition
   
  2 on the use of speech recognition on gtalk you can ask your question on the forums of gtak. Here is the link.
  Voice and video Chat
  http://www.Google.com/support/forum/p/chat/label?lid=18819d87e4369fa5&hl=en
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Speech recognition does not match the language of the User Interface in Windows 8.1

  How can I update my speech reconition language that matches my user interface language? Thank you

  Hello

  Thanks for posting your question on the Microsoft Community.

  I apologize for the inconvenience caused to you.

  I understand that the problem with speech recognition does not correspond with the user interface in Windows 8.1

  This issue would have occurred due to some damaged system registry entries.

  Please provide me with the following information to better understand the issue.

  1. What language is speech recognition uses in the system?

  2. What is the base language that is installed in the system?

  Note: Speech recognition is available in the following languages: English (United States & United Kingdom), French, German, Japanese, Mandarin (Chinese simplified and Chinese traditional) and Spanish.

  You can also check out the link below.

  How to use speech recognition

  http://Windows.Microsoft.com/en-us/Windows-8/using-speech-recognition

  Please provide the information above to help you best.

  Thank you.

• Speech recognition is not all sounds during installation of the wizard.

  Sound recorder works fine and I can record, save and play wav files.  CLS recognition requires all upward before use and the recording meter bar moves I read the sentence of the sample.  After that, I get the error that SR couldn't hear anything.  Help please.

  Hi BTKpickle,

  Welcome to Microsoft Answers Forum.

  There are several possible causes of the problem:

  ·         The microphone isn't close to capture your voice. Make sure that the microphone is positioned close enough and you speak directly into it.

  ·         The microphone is cut in. Some microphones have an external control for muting. Make sure that the mute control is disabled.

  ·         The microphone input level is too low. Make sure that the microphone input level is set correctly.

  Entry level to adjust the microphone

  1. Open Audio devices and sound themes by clicking Start , clicking onto Control Panel, hardware and sound, and then clicking its.

  2. click on the recording tab.

  3. double-click on the microphone you are using speech recognition.

  4. click on the tab levels and then use the slider to adjust the entry level for your microphone.

  ·         The microphone connections are not properly attached. Make sure that microphone cables are intact and unbroken. The connections to the computer can be loose, so unplug the wires and reconnect them by ensuring that they fit.

  ·         A different microphone is selected to be used with speech recognition. If you have more than one microphone installed on your computer, that bad could be selected to be used with speech recognition. Make sure that you use the microphone selected for speech recognition.

  Change which microphone is used with speech recognition

  1. Open Audio devices and sound themes by clicking Start , clicking onto Control Panel, hardware and sound, and then clicking its.

  2. click on the recording tab.

  3. Select the microphone that you want to use with speech recognition, and then click set as default.

  Check the documentation that came with the microphone for additional troubleshooting information.

  See if you are able to complete the installation wizard.

  For solutions to common problems with Windows speech recognition, see

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• speech recognition - "this command is not available now"...

  I have windows 7 with office 2010 and when I try to say commands, such as select Word or correct the word or ordering another new paragraph I receive a message of this command is not available now... when it will be available? also, when dictating a sentence, if I stop it capitalizes the next word in mid-sentence... How can I fix that? and don't forget that I can't use the exact word or select Word... it took me twice as long to make this letter with speech recognition, of the type just... I read on these forums, I googled to death and please please please do not direct me to another forum... I set up my micro I did the tutorial and additional training, I looked over the options and others and I can not understand how to fix... the exact same question was asked and the person who answered just said set up the microphone, the tutorial and the additional training and as many links to forums... I clicked and traveled all the links and the answer may seem not available as to why my speech recognition accepts not my orders... Please answer and if you don't know, don't send me on a forum's wild-goose chase...

  The solution to your problem is to click the speech recognition microphone, first before you open Word.  Once the speech recognition is started, right-click it, click options, select Notepad of dictation and then open Word.  If you do it in this order, everything should work correctly in Word.  Notepad will not come to the top.  The command everything will work directly in Word itself.  If you open Word first before the speech recognition and do not have Notepad - "command not available" will come.  I hope this helps.

• Can I use speech recognition to dictate something pre-recorded device

  I tried to use speech recognition to dictate a few minutes of a recording on the computer device...

  Hello

  Yes, you can use speech recognition to dictate words that are recorded voice message before.

  For more information, see the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognition

  Dictate text using speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/dictate-text-using-speech-recognition

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-do-with-speech-recognition

  Add or edit words in the speech dictionary

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-edit-words-in-the-speech-dictionary

  Turn on dictation for all programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-on-dictation-for-all-programs

  Windows speech recognition

  http://www.Microsoft.com/enable/products/windowsvista/speech.aspx

  It will be useful.

• Words are displayed automatically while dictating to speech recognition

  Original title: speech recognition
  My speech recognition works very well except for a really irritating problem. If I fall silent, it will print a series of... of... or if if if. I am very experienced with speech recognition - I used the Dragon for years and have a very good headphones so what goes wrong? If I say 'new line' it will always put a 'from' front the word I say to start the new paragraph. Help please?

  Hello

  Are what program you trying to dictate to the breast?

  If you use a third party software, then try to use Word or Notepad and check if it makes a difference.

  If you already use speech recognition in Word, you can use the speech dictionary to exclude these words (which appear automatically) dictation. You can also
  Add words that you frequently use that speech recognition does not recognize.

  To open the speech dictionary:
  a. make sure that speech recognition is running and then say "open Speech Dictionary."
  b. click or say add a new Word or prevent a Word from dictation and then follow the instructions in the speech dictionary Wizard.

  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista speech recognition Forum

  I'm looking for best Vista speech recognition Forum for Big Al 199 for learning purposes

  Hi Big Al 199,

  Unfortunately, there is no dedicated Forum on the Vista speech recognition. However, the Windows help articles should help you in learning of speech recognition. Please see the links below

  Set up speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognition

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-do-with-speech-recognition

  Train your computer to recognize your speech

  http://Windows.Microsoft.com/en-us/Windows-Vista/train-your-computer-to-recognize-your-speech

  Use speech recognition to browse the Internet

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-speech-recognition-to-browse-the-Internet

  Use speech recognition to click anywhere on the screen

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-speech-recognition-to-click-anywhere-on-the-screen

  Use speech recognition to operate windows and programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-speech-recognition-to-operate-Windows-and-programs

  For more information about speech recognition, please navigate to different links below
  http://Windows.Microsoft.com/en-us/Windows7/search?q=speech+recognition&PRD=Vista

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Speech recognition. It is based in my vista basic 32?

  I click on speech recognition and I am responsible to visit on line community. But here, no light. What's wrong??

  Hi Woolf5248,

  1. don't you make changes before the show?

  Yes, voice recognition is built in 32-bit editions of Windows Vista.

  We recommend you to check if any system files are missing or corrupt. To do this, try the following steps.
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  For your reference:
  1. see set up speech recognition
  2. see what can I do with speech recognition?
  3. see troubleshoot speech recognition problems

  Visit our Microsoft answers feedback Forum and let us know what you think.