transitions - possible bug in VBAI 2012
I have an application in which I measure the diameter of a piece in a State and then make a selection of tests in differrent States. The transitions are set to the value of the diameter (circular search Edge 1 - diameter (Pixel).
If we transition1 doubleclick, followed by a transition to double-tap 14, 14 transition gives a different result then initially set. However, if us and then cancel and double-click transition 14 once again, we see the only initially set such seetings.
We tried it with different transitions and in different programs. Same result.
Attached screenshot of the same transition (without changing the transition between the two) after the first and second double click.
We use the Vision Builder AI 2012
With sincere friendships.
Tom
I have reproduced this issue and we will work on fixing it the Vision Builder AI 2013, we soon hope to get out.
Thank you!
Brad
Tags: NI Hardware
Similar Questions
-
Problems with migration from LabVIEW 2012 VBAI 2012.
Hello.
Someone had problems with the migration of the VBAI 2012, 2012 to labview?
I'm filing this disadvantage when use migration in VBAI everything works fine, when I use LabVIEW with 'Vision Acquisition Express' for example, everything works as it should.
The solution I've done has been to work with the control VBAI API and it worked perfectly, but I wonder, if a bug or a known error on this process.Thank you.
Finally, I solved it by installing the "Vision Development Module 2012 SP1". With this update worked correctly migration.
-
VBAI 2012 "save the image calibrated to the file" issue
Hello
Under the State of 'Calibrate Image', 'Save the image calibrated to the file' option does not work correctly.
With the exception of the type 'Point of Distance' of the calibration, the new image is ever recorded. I checked the calibration image .cal2 in the folder \ProgramData\National Instruments\Vision AI\Calibration Builder, each iteration the meta-data are updated but not the image.
I have a camera calibrated with a grid (see picture) and using the model of the distortion. Working remotely can sometimes change and I need to take a recalibration. This step should be as simple as possible. Example: put a model calibration in the field of view, then press a button recalibrate.
The problem mentioned above, it is impossible. Whenever I have to manually go into the choice of the State of the Image calibrate and update the calibration image myself. Otherwise, calibration is recalculated from the original image which is not best suited for the new working distance.
Is there an easy way to make VBAI save a new image of calibration with each iteration?
Or is it something that I did not understand this option 'save image calibrated to the file?
Vision Builder for Automated Inspection VBAI 2012
Windows 7 64 bit
Best,
Ken
Hi Larpin,
Unfortunately VBAI does not support the suggested behavior. The best solution in my opinion would be to implement your application completely in LabVIEW!
To Eval download link. Version:
https://lumen.NI.com/nicif/en/evallv/content.XHTML
Kind regards
MISIC
-
Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug?
When the same text is seen in another browser, it is displayed correctly as "two."
The same question is displayed on another computer.
Thank you.
Sounds that you use a font that supports ligatures (Palatino?).
-
Could not open VBAI 2012 / 2013 VBAI
Hello
I installed a VBAI 2012 (trial mode), but I can't open it
He is stuck on the splashScreen
Operating system: Win7 64 bit
I also tried the Version of 2013, but some problems...
Could you please help me
This can happen when the mDNS OR the answering service does not work. Click Start, and then type 'Services '.
In the window component Services, select Services (Local) in the left pane and make sure that the mDNS OR Autoresponder Service is started. If it is not running, double-click it, and click the Start button.
-
possible bug in match pattern string of dot and a special character
Hi friend recently and I find something in game chain model that it looks like bug, I want to know labveiw expert opinion on it
the possible bug is
have you ever tried to match (.) dot for use in regular expression? this icon could not find the point inside the string?
I also think what happens if we try to find a character within a string that is a piece of special character
for example how you can use this icon to find \b inside the string as (hatef\blabview)?[.] to find the period
\\B to find the backslash b
-
Possible bug: save the table with double and extended precision to the worksheet
If one concatenates an array of double-precision and an array of precision extended with the 'build' vi table, then recorded using 'Write in a spreadsheet file' vi any digits to the right of the decimal are reset to zero in the saved file. Regardless of the entry of signifier of format (for example %.10f) to the vi 'Write in a spreadsheet file'.
I'm on Vista Ultimate 32 bit and labview 9.0
This is a possible bug that is easily circumvented by the conversion of a type before you incorporate arrar in a worksheet. Nevertheless, it's a bug and it cost me some time.
Hi JL,.
No, this is not a bug - it's a feature
Well, if you'd look closer you would recognize the 'save to spreadsheet' as polymorphic VI. As this polymorphic VI does not support the EXTENSION numbers internally (it only supports DBL, I64, and String) LabVIEW selects the instance with more precision: I64 (I64 a 64 bits of precision, DBL that 53...). Your options are:
-the value of the instance to use as the DBL (by right click and "Select type... »)
-make a copy of this VI, save it under a different name and make support number of POST (not rework the polymorphic VI like you would break compatibility with other facilities of LV or future revisions)
-
Possible bug on role assignments
I am using SOA/BPM 11.1.1.7.
I found a possible bug when you deploy a BPM Application which mixed assignments (some directly to one user, others to a role of Application BPM (created in the workspace).
I did two tests.
Test 1. Created a project/process of BPM with two lanes. In organization, I assigned the roles of corridor users (to the embedded Weblogic LDAP). On deployment, these roles were driven from the area space of work/Administration/roles (when logged in as a Weblogic).
Test 2.
In the workspace I created a few BPM roles (and put assignments users), then in a project of assigned BPM Application roles to my role of corridor.
However, I created a corridor and made the assignment directly to the user.
On deployment, the role which has been directly attributed to the user at the level of BPM projects has been eliminated NOT to the role area.
A video of it is here: http://youtu.be/bWtEIRavlEY
Stuart
Hi Stuart,
Could check you how your mapping roles work if you check "deployment of existing objects of update on ' option in organization.xml?
-
APEX translated application 4.2 available possible bugs on theme 25
Hello everyone,
I try APEX 4.2 with reactive Blue theme (theme 25). So far so good. When I tried to do an application translated from my one shot (I don't translate any string, just de-seeded and released the app), I discovered some possible bugs on the page layout. For example, in areas of form, fields with the scope of auto column cannot be aligned in the same line. They are moved to a new line, although in the original application, it works. I know it's easy to fix by setting a specific value in the scope of column. But how can I fix the page layout in the pages who are magicians (with the standard model of region) and fields are placed in the table not div like in the initial application. Is there a difference between a translated application (which is actually not yet translated) and on the initial page rendering?
Thanks in advance.Hi Grandmaster,
I think that you are hit bug 15922307 - model of presentation of the grid of a translation application is not used
who sets us 4.2.1.00.08. Can you check if you're on this version or if you are still on APEX 4.2.0Concerning
Patrick
-----------
Member of the APEX development teamMy Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf -
Possible bug in a Select NULL-option list
Hi all
I tried to use a list to select a tabular form and found a possible bug.
I have reproduced the issue on apex.oracle.com.
Please visit http://apex.oracle.com/pls/apex/f?p=38499:2.
It seems that the fields for 'Display value Null' and 'return Null value are switched.
Can someone try this and tell me if I'm doing something wrong or it's really a bug?
Kind regards
MoritzHello
what I saw bug # 10095760 has been filed for this issue.
Concerning
Patrick
-----------
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf -
I stumbled upon a possible bug in the class Date. When comparing two dates of November 20, 2007 and on November 22, 2007, I get false logic.
public var expireDate: Date = new Date ("2007", "11", "20");
public var todaysDate:Date = new Date();
If (todaysDate.getTime () > = expireDate.getTime ())
{
this.currentState = "courseExpired";
}
on the other
{
this.currentState = 'loggedIn ';
}
todaysDate.getTime (returned): 1198126800000
expireDate.getTime (returned): 1195742469234
But whatever happens, todaysDate wins even if it shouldn't. Courses should have shown have expired.probably because the month is zero means the basis therefore 11 December November not :) (I know its not very obvious, but it's like that in flex and java as well).
-
possible bug? formatting number 0 is displayed as 4 294 967 295
This is really two questions in one. First of all, I have a routine that sometimes gives a result of 0, which is * sometimes * displayed in an AdvancedDataGrid column in the form of 4 294 967 295, which I assume is somehow a significant number (more big int?). In any case, I have one ADG with a column defined as:
< mx:AdvancedDataGridColumn headerText = "Remaining work" labelFunction = "rem_work_fmt" textAlign = "right" / >
The called labelFunction is illustrated below:
private void rem_work_fmt(item:Object,_column:AdvancedDataGridColumn):String
{
var num:String = numberFormatter.format (item.get_remaining_work ());
trace ("result:" + num);
return num;
}
Track of exit impressions: "result: 0" as expected, but the number displayed in the grid is sometimes 0 and 4294967295 sometimes.
More strangeness, this only happens to the last column in the ADG. I call the same logic of format on another column and have never seen a wrong result. In addition, the same 'get_remaining_work()' function is called on the same data and the result is properly displayed in a field of text as 0.
Second question, I met a few other possible bugs, I didn't report because I found a work around. How to do that in the beta program?LW1001,
Bugs can be filed in the public bug at http://bugs.adobe.com/flex/
You will need to register before you can submit bugs.
Also, if you can attach files to bug to the bug report, it makes it much easier for Adobe to investigate.Let me know if you have any other questions/problems.
Peter
-
Possible bug in sv_Harmonic distortion and Noise.vi
Hello
I ran into what seems to be a bug in distortion and Noise.vi sv_Harmonic
I call this VI into a higher level VI which is part of the box sound & Vibration tool (SVT SNR without harmonic (time) (1ch) .vi)
What is happening is that I sometimes get error 0xFFFFB1A3 (-20061):
Error-20061 occurred at NI_MABase.lvlibine Waveform.vi:22 > NI_MABase.lvlib:ma_Trap Fgen parameter Errors.vi:1
frequency must be<= sampling="">=>Possible reasons:
Analysis: The selection is not valid.
This error is actually produced in distortion and Noise.vi sv_Harmonic by one of his subVIs (your unique information (complex) .vi svc_Extract) although I'm not able to activate debugging for this VI so I can't dig deeper.
What seems to be the case, it is for certain fundamental frequencies that result in higher order harmonic which is located very close to Fs/2, you get the error. I have attached a waveform and a simple VI that generates the error. My debugging, it seems that the error occurred when the code attempts to extract the harmonic at 5119,53 Hz. FS/2 is 5120Hz, so it must be valid, but generates an error.
Thank you
-mat
Hey Matt,
I spoke with R & D and the source of this problem is we're detects peaking at exactly the Nyquist frequency for the 127th harmonic, while it should work, we get the false error. To work around the problem, you can specify the frequency range of 0-126 harmonics as seen in the image below. Have one less harmonic should not be a big problem as the harmonic 127th is anyway in the noise. R & D is now aware of the issue and look forward to it. Thank you!
-
When I save the changes to the hair using the tool change the geometry in a file .fuse on the computer. These changes are lost when I load the model to the fuse. Is this a bug?
Saved to disk:
Reloaded in fuse:
Post edited by: Allan Chaney I've included screenshots.
Thank you much for the details. I tested it on Windows and Mac and reproduced. Doesn't seem to be a bug (but not a guarantee). I've done some characters, recorded their soft-mod-ness very well. I connected with the engineers for more tests and we will have fixed as soon as possible!
-
Possible bug in LR6 (CC) re: list of keywords
Something strange is happening in my new LRcc, which looks like a bug, but there may be a new behavior that I don't understand.
When I try to add a new keyword by clicking on "+" in the "Keywork list" header, the new keyword is not in the list. It does not "keywords recent' set in the keywords Panel. He also gets attached to a selected photo if I have this checked when I create the key word as a tag. But, nothing in the list. However, if I create a new keyword, which is a sub of an existing keyword, by clicking right on, say, "birds" in my list of keywords and selecting 'create tag keyword inside the birds', the keyword appears. I confirmed that it worked as planned in LR5. Y at - it a new procedure to put a new keyword in the list, or is it just a bug? Or do I do something stupid (always a distinct possibility).
CC of LR newest release, MacOS 10.10.2 on a MacPro.
Thank you, in advance, for advice or fix.
No, it wasn't the problem (I had not checked the option 'people' on the keyword, and I was showing the keyword 'all' in the list) but I discover. It turns out that one of my key words had the option "Put new keywords inside this keyword" set, which meant that my new keywords appear at the top level, but were inside my keyword "teams" where I could not see them. I do not know if this option existed in LR5, and I have no idea why it has been activated for "teams", but who, off, solved the problem.
Maybe you are looking for
-
Where is the application of friends for series 1
My wife has the original Apple Watch. She uses the functionality of friends (side-scroller) to add friends for quick access. I just bought Watch series 1 and I do not have this feature? That has been deleted? If this is not the case, how to do it on
-
Why is there a newer version that I installed (with automatic update)
Advice of ScanCircle I use the version of Mozilla Thunderbird 31.6.0 (x 86 en - us) 31.6.0, but the latest version is of 38.0.Ditto for Mozilla Firefox (x 86 en - us) where I am under 37.0.2, but the latest version here 38.0 also.My system is configu
-
Satellite M70-148 - power on problem after hibernation
Hello:Sometimes, I have a problem I can not turn on after hibernation. The fan starts, but the computer does not start again. I can only turn off again by pressing the button for a few seconds. When I remove my power cord and press the power button,
-
printer will not scan during installation of realignment
Windows 7 (64) using PRINTER 3050 J611a - after the replacement of the printer carriage. alignment printing OK, but the scan does not see the oridginal. Need advice to fix.
-
Printer print printing - printer paused. Unable to print a test page.
I tried to install a driver printer compatible with my new computer Windows 8 for more than two weeks now. I finally got a driver installed, but the printer is "suspended" from previous attempts to install. How can I get the printer in normal mode (n